Secondary connections to a time capsule

Hello,
A housemate has set up his Time Capsule as a wifi network. While I've been able to access it through my ipad and others have been able to access it through their Mac Books, anyone with a PC has been unable to access the Time Capsule. I have gone through the recommendations on this site and a couple of others, but I have been unsuccessfull in accessing the Time Capsule as non-primary user.
Thanks for any help!

It is really important that the TC has SMB naming.
Short, no spaces and pure alphanumeric.
It is really important to use bonjour for windows.
It is really important for the basic network functions to work.
You are not telling us enough info.
What have you tried?
Are you getting internet via the TC even on the windows machines?
Your statement.
anyone with a PC has been unable to access the Time Capsule.
Does this mean access the hard disk??
WIndows can be tricky.. faced with a new network it will move itself to assume the new network is Public and refuse any connection. So is the computer still set to home.. not work or public.
Can you ping the TC by name or IP address??
If you directly type the IP address into windows explorer what happens.
\\10.0.1.1 (which is the default IP.. use the actual).

Similar Messages

I have connected a new time capsule to a dsl modem. It doesnt see the internet. Airport utility says: Disconnected. But it isnt. Internet tab shows PPPoE. Must I enter Account Name or Password? If so, where do I find them? If not, what do I do?

I have connected a new Time Capsule to a DSL modem using an ethernet cable . The modem is working fine and connected fine. But the Time Capsule doesnt seem to be talking to the modem. If I click the internet Icon in Airport Utility it shows Disconnected.If I click the Time Capsule icon and go to the internet tab it shows Connect using PPPoE. Is that what it should be? In the box below there is place for an account name and password. DO I need to filll these out and if so what do I put there--information about the Time Capsule of informationabout the Modem? And where do I find the information.
Or am I completely on the wrong track.

Thanks. The modem is a Speedtouch ST585 v6. How do I know whether it is in adsl bridge? Also this is a modem-***-router. Does that make a difference?
If you did not put it in bridge then it is not in bridge..
Connect a computer directly to the modem.. open the browser to either 192.168.1.254 or 10.0.0.138 (if neither of those work you will have to check the IP address your ISP has set).
BTW who is your ISP and do they allow PPPoE.. for instance most ISP in UK do not use pppoe so you have no choice but to run the 585 as a router. In which case bridge the TC
Anyway.. open the setup configuration in the Thomson and select a template that says bridge.. run through the wizard and it will then bridge the modem.
And I am using Airport Utility 6.0. How do I get the earlier version?
By reading the site link I just gave you.. downloading the utility and running it on your computer. Or simply google to 5.6 lion airport utility... that is the way I find things when I don't have the link memorised.
Finally, AIrport Utility shows a number in a red dot next to the time capsule icon, currently 2. What is that for? What does it tell us?
Firstly download the useful utility.. but the dots tell you something is wrong and preventing the TC from working.. if you open the utility it should tell you what the errors mean.. I cannot tell you what they are, but it is likely to be no internet connection and pppoe has failed.

MacBook Pro won't automatically connect to my Time Capsule for WiFi

My 2012 MacBook Pro (non-retina) won't automatically connect to my Time Capsule for WiFi. I had issues with my Comcast router before, and i reset my time capusle a few times, is that th reason why now everytime i wake my macbook up it dosent automtically connect?

Yes.. wireless after sleep or reboot is a problem. See the info from Tesserax.
https://discussions.apple.com/community/wireless/airport?view=documents
Unable to connect after sleep .. you will see it in the list.

How can i exclude my macbook backup on time capsule from other imac connected to same time capsule?

we have several mac connected to same time capsule, how can i exclude one macbook backup from all the others mac accessing same time capsule?
thanks

Not exactly clear what you mean.. the TC will keep each Mac backup in its own sparsebundle.. it does this automagically.. The backups are not mixed.. all are kept separate.
Or is this a security question.. you don't want people looking at the contents of the backup?
You can increase the security of the TC.. but it is too late.. you should have done it when first installed. If you go to the setup you can change security (Secure Shared Disks) by selecting with Accounts.. the problem is you will lose access to all the existing backups. You really need to do a clean start.. create accounts for all the users and start again.
Also note security is not a big feature here.. anybody with physical access to the TC can press the reset for 1sec and get access. It is a home device not a business device.

Can anyone recommend an external storage device to supplement my mac book air? I already have a time capsule but want the new device to replicate the data on that so ideally would like a device that i can connect to the time capsule through a cable.

Can anyone recommend an external storage device to supplement my mac book air? I already have a time capsule but want the new device to replicate the data on that so ideally would like a device that i can connect to the time capsule through a cable.

Hi CJR
I'm not sure how Time Capsule can be replicated onto your external drive but there is a USB port on the back of TC that can be hooked up to any recent external drive.
Another thing to think about , besides a Time Capsule failure, is the theft of your Time Capsule, so it might be a good idea to consider separating any redundant back-up from your Time Capsule or both my be stolen.
TC will back up until full and then begin deleting the oldest back-ups. Mine is a 2TB Time capsule.
My back-up plan is as follows:
1. Macbook Air back-up on Time Capsule though Time Machine backs up everything - I think it's about every 30 min or so.
2. Contacts, reminders, appointments, notes, email are backed up through iCloud.
3. iTunes and non-itunes purchased music is on iMatch (and no need to back-up) and any non-iTunes music is backed up on an HP external drive (in case Time Capsule dies)
4. Photos are on my MacBook Air and are backed up on my HP external drive.
5. Office documents (Excel, Powerpoint, Access etc) are stored in a Skydrive app (like iCloud) and Skydrive syncs these docuemnts with the MS cloud and my old PC and does not alter their native format like storing in iCloud would do.
Cheers

How do I connect an old Time Capsule to look for data from a previous OS?

Hello. I replaced my old Time Capsule with a new one a few months ago, and broke in the new Time Capsule with a fresh backup of a clean 10.9 install after migrating my user account.
Today, I noticed that there were some folders full of personal data that are neither on my MBP, nor in my Time Machine backups on the new Time Capsule. I am hoping that these folders still exist on my old Time Capsule which I used with 10.8.
I'm wondering how to search through my old Time Capsule and its Time Machine backups. Specifically, I'm wondering how to connect it to my MacBook Pro, and whether I will be able to search for my (hopefully not) lost data through the Time Machine interface, or through the directory structure contained in Backups.backupdb.
Can anyone help me out with a plan to proceed?
Thank you very much.

1. Turn off Time Machine in System Preferences
2. Unplug new Time Capsule
3. Turn off Wi-Fi in the menu bar
4. Attach old Time Capsule to power
5. Attach old Time Capsule to MBP via ethernet
6. Wait for old Time Capsule to appear in Finder > Sidebar > Shared
7. Select old Time Capsule in Finder > Sidebar > Shared and Connect to old Time Capsule
8. Select the Data directory
9. Double-click on the .sparsebundle file that represents the volume that was backed up on the old Time Capsule
10. Hold down the option key and click on the Time Machine icon in the menu bar and select Browse Other Backup Disks...
11. Select the Time Machine backup disk you would like to browse and choose Use Selected Disk
12. Browse old Time Capsule backup in Time Machine environment, restore data as normal, exit Time Machine as normal
13. Eject old Time Machine backups (the .sparsebundle you mounted) under Devices in Finder > Sidebar
14. Eject old Time Capsule under Finder > Sidebar > Shared
15. Disconnect ethernet; disconnect old Time Capsule from power.
16. Plug in new Time Capsule (it boots); turn Wi-Fi on (reconnect to network, if necessary); turn Time Machine back on in System Preferences

Is there a way to see and have control over who connects to your time capsule wifi network?

Ok, have this question. Have a time capsule wifi network. Have the latest mountain lion on my mac pro. I know if you go into airport utility, and you click on the picture of my timecapsule it shows what clients are connected to my time capsule aka using my internet etc.
What I want to know, is there somewhere I can go on the mac where I can view who is connected to my time capsule wifi in more detail, see amounts of data they are using, and maybe even boot them off, or ban there computer from the network for a while if need be? Trying to assess what family members are using up all our data, and want to ban the appropriate offenders
Even if Mac doesnt have anythink, if you know any third parties from the app store that have an app that is like a "tap" on the top of your Mac that shows networking details, that would be great too!
Thanks heaps!

Nope.. TC are not burdened with controls.. don't you know..
In fact you will find it hard to find a wireless router on the market that mets your specs.. but there is a great 3rd party firmware.. called gargoyle.. this can be loaded like an official firmware in a NETGEAR WNDR3800 which is a fairly cheap very good solid wireless router.. bridge your TC behind this router running gargoyle and you can set quota for all your family members (kids I imagine). Quota can be set for daily, weekly even hourly.. and you can apply throttles or qos.. none of these controls even exist in the TC.

Can't Connect to My Time Capsule Backups, Please Help!!!

I have been using Time Machine/Time Capsule to back my data up for over a year. I bought a new MacBook Pro this morning. I did not want to use Migration Assistant to transfer everything over because there were many bugs and corruptions on my old disk and was scared that would all be transferred to my new machine. It was time for a fresh start.
I set up my new computer and transferred most of the files I needed via a flash drive. I am now trying to set up my MacBook Pro to connect to my Time Capsule backup disk via Time Machine, but once I enter Time Machine it does not allow me to go "back in time" to see all of my previous backups and restore points. There are some really important files I am trying to get to, but this computer isnt connecting to the Time Capsule backups. The old computer has already been completely reformatted, but it is still able to access the Time Capsule backups.
I have done some internet research and learned that Time Machine uses a computer's ethernet MAC address to allow access. There are some codes posted on various websites that allow to alter what Time Machine thinks you MAC address is so that you can access your backups with a new computer/different logic board. None of these Terminal workarounds worked for me. The Genius Bar and Apple Care couldn't help either.
I am hoping somebody can help me out. I understand I can use my old computer to get into Time Machine and retrieve what I need then transfer those to the new machine. But there must be a way to allow a new computer to fully access Time Capsule backups, but curiously, I can't find it. I rather have my new computer have full access because I am selling the old laptop and so I wont be able to use it to access my backups any longer.
Sorry for the long explanation, but I hope that gives someone all the facts required to both understand what I am saying and help me fix the problem.
-Amir

Right now it is just empty because I have unmounted and disconnected my Time Capsule. I'm trying a low-tech work around to see if this works, but much rather do it the "right way."
What I am doing is this:
(1) Use Migration Assistant to copy everything from the Time Capsule to the new machine (this is exactly what I was trying to avoid initially). Migration Assistant has been copying files for about 5 hours now (still not sure what is going to happen).
(2) Create a full backup on Time Capsule with my MacBook Pro now that it has everything from the Time Capsule on it.
(3) Do a fresh install of Snow Leopard.
(4) Hopefully, have the fresh start on my machine I wanted, but still have access to at least one archived copy of my old computer and files/folders.
Does this make sense? Basically, the new machine does not allow me to access the old backups. So I am handicapping the machine now by reverting to my old settings via Migration Assistant, will back that up, then start all over from scratch again but hopefully have the peace of mind that my files are not gone because I will at least have that one copy of all my old copies in a Time Capsule backup that the new machine can access.

I can't connect with the Time Capsule.

Hello everyone,
Some years ago, I bought a Time Capsule. Until now, I didn't want to use it as an extern HD.
So I tried today.
I am using it for a year now, as main router. Several computers and iDevices are using it.
Because I had forgotten some things - and I hadn't wrote it down - I decided to reset it and configure it again.
Since then, the internet has become slower - and I my Macbook pro can't connect to the Time Capsule's disk.
In Finder's everything fine. Left, under 'Shared', I can see the Time Capsule as a HD.
When I click on it, I see: "No Connection". Then I select "Connect As", and I fill in the Time Capsule password.
It tries to connect a few minutes, but then I get the message:
"The backup disk could not be found. Make sure the backup disk is connected or open Time Machine preferences to select a different backup disk."
In the Airport Utility, there's a green light.
*My firmware has the newest updates
*I am using Snow Leopard
*I am using newest update of the Airport Utility
*Since reset, internet's fine but a bit slower.
Other Questions:
*Can I use my Time Capsule for other things than only Time Machine (backup)?
*Can I divide it in parts? (Backup, User)
*Can I backup multiple devices on it? (Macbook Pro, iMac, Macbook Air etc.)
Hope you can help me!
iFallrise

What actual model is the TC.. the A1xxx number from the rubber base mat???
As they age they become unreliable. Some earlier and some at 3year mark.
It greatly depends on the setup of the existing network.
I would recommend a downgrade in the TC firmware.. as with Snow Leopard there is no advantage to you in the later firmware.
Go to the airport utility and select firmware update.. hold down the option key when you make the selection and all the previous versions available for your model will come up. I recommend using 7.5.2
Do another reset of the device. This time a full factory reset.. and start the configuration again.
Ignore update to firmware requests.. turn off the reminder.
Set all names to SMB standard. short, no spaces, pure alphanumeric. TC name, wireless names, hard disk name.
For wireless I recommend you use wpa2 security with 8-12 character passkey.. pure alphanumeric.
Set to manual for radio channels and test 1, 6, 11 in turn for the best.
Depending on the broadband you use, the TC must be in router or bridge mode.. tell us more if you need help for this.
If you think the TC is slowing you down, do a test with direct connection to the broadband modem and give us the speed comparison.. direct and via the TC ethernet or wireless.. tell us which though.. wireless will always be slower than ethernet.
If you have issues still with the hard disk it might need some work.. older models the disk might need to be erased .. please open any time machine backup and run a verify.
A5
http://pondini.org/TM/Troubleshooting.html
Other Questions:
*Can I use my Time Capsule for other things than only Time Machine (backup)?
Yes, but the TC is designed primarily for Time Machine.. if you store files, there is no method in the TC to back up those files.. do not make them the only store.
*Can I divide it in parts? (Backup, User)
You cannot partition a TC .. not without removing the disk. You can create a disk image.
Q3 http://pondini.org/TM/Time_Capsule.html
*Can I backup multiple devices on it? (Macbook Pro, iMac, Macbook Air etc.)
You can use multiple devices with TM. Be aware you need lots of free space for this to be successful. So you need to add up the total you want to backup on each computer.. and at least double it.

My macbook pro is connected to internet via my time capsule but my iPad and iPhone won't. it shows wifi connection to the time capsule but when i go on to the internet on the iPad or iPhone, it comes up with network error. can anyone help?

my macbook pro is connected to internet via my time capsule but my iPad and iPhone won't. it shows wifi connection to the time capsule but when i go on to the internet on the iPad or iPhone, it comes up with network error. can anyone help?

This can be caused by a number of issues.
Was everything working and then suddenly stopped??
Or is this a new clean setup and has never worked.
Do you have a cable modem which is not a router and the TC setup in bridge? That will cause it. The TC must be in router mode, ie dhcp and nat.
Check the IP the MBP gets including dns and gateway..
Then check the ipad/iphone.. post what IP dns and gateway (router in applespeak) they get.

Airport Utility says Mac connected to unkown Time Capsule

Hi,
I have an issue with Airport Utility (6.3.2) and a Time Capsule in my local network. This is happening at work where I have an iMac connected to the local LAN via an Ethernet connection. Wireless airport is switched off. When I open Airpot Utility, however, it shows my computer connected to a Time Capsule somewhere in my local network. See the image below.
None of my colleagues, nor the system administrator, knows to whom that Time Capsule belongs to nor were it is located. If I go to System Preferences > Network and I disable the Ethernet port ("Configure IPv4", select "Inactive") my internet connection is gone, but Airport Utility still shows the Time Capsule as connected to my iMac.
The only manner in which Airport Utility will show the Time Capsule disconnected is by unplugging the Ethernet cable.
So, I have a few questions because I could not find the answers anywhere and my system administrators have no idea what is going on (they are specialised in Windows environments):
1) The fact that Airport Utility displays a green light on the Time Capsule does it mean it is connected to my computer? If so, how can I disconnect it? Clicking on the Time Capsule icon I am asked for a password I obviously don't know. So I cannot acess its configuration pane.
2) How do I know if there is any data traffic between my computer and the Time Capsule? I cannot find out its IP or MAC addresses (Airport Uitility will not show them to me).
3) Is it possible that the internet traffic of the owner of the Time Capsule is being re-routed through my computer? My internet connection is indeed more unstable and slower than that of my colleagues (using Windows or Linux) but I can't figure out why.
Thank you.
iMac 21" (Late 2012, iMac13,1)
Mac OS X (10.9.5)
Airport Utility 6.3.2

1. It isn't connected, but Airport Utility sees in on the network.
2. There shouldn't be any data traffic unless you initiate it.
3. Highly unlikely.

My Time Capsule expired and no longer works. My printer (a HP) will now not work as it still wishes to connect through the Time Capsule. It will not allow itself be recognised through a USB connection to my Mac. Anyone got any ideas?

My Time Capsule expired and no longer works. My printer (a HP) will now not work as it still wishes to connect through the Time Capsule. It will not allow itself be recognised through a USB connection to my Mac. Anyone got any ideas?

You will need to install the printer on your Mac
Open System Preferences (gear icon) on the dock
Open Print & Fax
Click the + (plus) button at the bottom of the printer list
Wait for your printer to appear in the next box, then click it to highlight it
Click Add at the lower right
Be sure to select the correct printer when you try to print as you will see your printer listed twice. Good idea to make the printer now installed on your Mac the default printer so you do not have to choose which printer to use each time you want to print.
You can also go into Print & Fax, select the printer associated with the Time Capsule and click the - (minus) button if you want to delete that location.

Kernel panic when I connect to my time capsule

Hi,
I have a macbook pro 2.7ghx, corei7, 8gb ram. Running mac os x 10.7.3.
I recently allowed the system to do an automatic upgrade and now every time I try to connect to my time capsule or it tries to do a backup I get a kernel panic.
The wireless modem part of the time capsule is working perfectly.
Please help.

Fairly simple. port forward TCP 548 to the IP of the TC.
The hard part .. you can only use AFP.. so it has to be a Mac to join.
The public IP needs to be static or use dyndns service which will be available in the Linksys router setup.
If you need more details give more details..
Make and model of modem router. Linksys is hardly helpful.. they make about a zillion models over the history of linksys.
A google search of remote access time capsule will get you all the info you need.
This covers the fundamentals.. old but still valid.
http://gigaom.com/apple/access-your-time-capsule-over-the-internet/

HT1338 I'm trying to follow HP's instructions to add a driver for HP Color Laserjet CP 1215 which is connected to my Time Capsule. However, in System Preferences I can't "add" the printer to the print queue because I don't have a driver and you have to se

I’m trying to follow HP’s instructions to add a driver for HP Color Laserjet CP 1215 which is connected to my Time Capsule. However, in System Preferences I can’t “add” the printer to the print queue because I don’t have a driver and you have to select a driver before the add button becomes active. Therefore, the Mountain Lion software update doesn’t add driver software for the CP 1215 driver because I was unable to add the printer to the print queue.

This printer doesn't seem to be supported in ML:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01664444&lc=en&cc=us&dlc=en &product=412187#N2043
You could try the 1515 driver or use the Generic PostScript Printer PPD when adding the printer.
Hope this helps.

I have a HP Officejet Pro 8500 A909a connected to a Time capsule. My iPad 2 don't recognise the printer. Why?

I have a HP Officejet Pro 8500 A909a connected to a Time capsule. My iPad 2 don't recognise the printer. Why?

The pad will print to any airprint compatible printer. Hp makes several, but i do not see yous on the list.
Here is the list
http://support.apple.com/kb/HT4356
You can download the hp eprint app from the app store and see if that works for you.

Secondary connections to a time capsule

Similar Messages

Maybe you are looking for