Secondary DPM backup failure with error code 0x80070002

Hello everyone,
I have the following scenario:
Protected Server -> Primary DPM (DPM 2012 R2 UR4) -> Secondary DPM (DPM 2012 R2 UR4 - remote network)
I have created a Protection Group in Primary DPM server containing three folders under C: drive. Backups works fine.
In my Secondary DPM server, I have created a Protection Group containing my Primary DPM server's protected data, which is the entire drive C:.
I am getting the following error while running a Consistency Check on Secondary DPM server:
An unexpected error occurred while the job was running. (ID 104 Details: The system cannot find the file specified (0x80070002))
In the logs, I just see entries like this:
1238 0B5C 11/12 00:00:08.005 18 fsutils.cpp(4055) 6A3D1492-680E-40BC-974E-59FD1EED6B68 WARNING Failed: Hr: = [0x80070003] : GetFileAttributes failed for \\?\Volume{dff758bf-692e-11e4-80bb-00155d40499d}\5778d89f-e343-4bc8-a26e-7ee7f39e3da4\Incremental\b30c95f9-5e28-4fca-bcd7-0e630e6ea942\C-Vol\Program Files\Microsoft SQL Server\MSSQL10_50.DPM2012R2\MSSQL\DATA\
1238 0B5C 11/12 00:00:08.005 18 fsutils.cpp(4055) 6A3D1492-680E-40BC-974E-59FD1EED6B68 WARNING Failed: Hr: = [0x80070003] : GetFileAttributes failed for \\?\Volume{dff758bf-692e-11e4-80bb-00155d40499d}\5778d89f-e343-4bc8-a26e-7ee7f39e3da4\Incremental\b30c95f9-5e28-4fca-bcd7-0e630e6ea942\C-Vol\Program Files\Microsoft SQL Server\MSSQL10_50.DPM2012R2\MSSQL\
1238 0B5C 11/12 00:00:08.005 18 fsutils.cpp(4055) 6A3D1492-680E-40BC-974E-59FD1EED6B68 WARNING Failed: Hr: = [0x80070003] : GetFileAttributes failed for \\?\Volume{dff758bf-692e-11e4-80bb-00155d40499d}\5778d89f-e343-4bc8-a26e-7ee7f39e3da4\Incremental\b30c95f9-5e28-4fca-bcd7-0e630e6ea942\C-Vol\Program Files\Microsoft SQL Server\MSSQL10_50.DPM2012R2\
1238 0B5C 11/12 00:00:08.005 18 fsutils.cpp(4055) 6A3D1492-680E-40BC-974E-59FD1EED6B68 WARNING Failed: Hr: = [0x80070003] : GetFileAttributes failed for \\?\Volume{dff758bf-692e-11e4-80bb-00155d40499d}\5778d89f-e343-4bc8-a26e-7ee7f39e3da4\Incremental\b30c95f9-5e28-4fca-bcd7-0e630e6ea942\C-Vol\Program Files\Microsoft SQL Server\
1238 0B5C 11/12 00:00:08.005 18 fsutils.cpp(4055) 6A3D1492-680E-40BC-974E-59FD1EED6B68 WARNING Failed: Hr: = [0x80070002] : GetFileAttributes failed for \\?\Volume{dff758bf-692e-11e4-80bb-00155d40499d}\5778d89f-e343-4bc8-a26e-7ee7f39e3da4\Incremental\b30c95f9-5e28-4fca-bcd7-0e630e6ea942\C-Vol\Program Files\
In the DPM console, this data source status icon shows green, however no Recovery Point is created.
Do you guys have any idea on why this is happening?
Thanks for your cooperation.
Best regards,
Bruno Martins

Does Volume C:\ on your primary server involves boot configuration data which is offline?
This can happen due to installation of some 3rd party disk storage management solutions.
The following blog has some details on how to solve file not specified errors:
http://blogs.technet.com/b/askcore/archive/2010/06/18/reasons-why-the-error-enumeration-of-the-files-failed-may-occur-during-system-state-backup.aspx
Regards, Trinadh [MSFT] This posting is provided AS IS with no warranties, and confers no rights. If you found the reply helpful, please MARK IT AS ANSWER. Looking for source of information for DPM? http://blogs.technet.com/b/dpm/ http://technet.microsoft.com/en-in/library/hh758173.aspx

Similar Messages

  • Windows 7 backup fails with Error Code 0x80070002

    I am trying to back up my computer to 32 GB USB flashdrive and I get the error 0x80070002; the system cannot find the file specified.
    I've checked the event logs and I see the error: Event 14, volsnap "The shadow copies of volume C: were aborted because of an IO failure on volume C:."
    I'm running Windows 7 Home Premium, Service Pack 1, 64x.

    As it is a Windows 7 related question, it is recommended to post on Windows 7 forum instead of Windows Server forum:
    http://social.technet.microsoft.com/Forums/windows/en-US/home?category=w7itpro
    In the meantime a check disk is worth to have a try. Also try to run the backup in off-time to free the system resource. 
    If you have any feedback on our support, please send to [email protected]

  • BACKUP failure with error code sqlcode: -2419 with DB2 and SuSeLinux

    Hi,
    I have scheduled an online backup for PRD into tape drive and it failed and gave an error mesage
    > SQL2419N The target disk "/dev/st0" has become full row=1
    Database error -2419
    I have kept the new tape but still getting the same error, My OS is Suse Linux and Database: DB2 9.7 FP4
    Please Help me with the solution
    Regards.
    Raju

    Dear Raju,
    Check this  & set the  "fsize"  parameter value.
    SQL2419N The target disk “disk” has become full.
    August 21, 2009
    SQL2419N The target disk “disk” has become full.
    Explanation:
    During the processing of a database utility, the target disk became full.  The utility has stopped and the target is deleted.
    User Response:
    Ensure enough disk space is available for the utility or direct the target to other media, such as tape.
    On unix-based systems, this disk full condition may be due to exceeding the maximum file size allowed for the current userid.  Use the chuser command to update fsize.  A reboot may be necessary.
    On non unix-based systems, this disk full condition may be due to exceeding the maximum file size allowed for the operating system.  Direct the target to other media, such as tape, or use multiple targets.

  • Backup failure with error code sqlcode: -2419 with DB2 and AIX

    Hi,
    I have scheduled an online backup for PRD into tape drive and it failed and gave an error mesage
    Op Obj Timestamp+Sequence Type Dev Earliest Log Current Log  Backup ID
      B  D  20070603230002001   N    T  S0013124.LOG
      Contains 39 tablespace(s):
      00001 SYSCATSPACE
      00002 PSAPEL31GI
      00003 PSAPES31GI
      00004 PSAPDDICD
      00005 PSAPPOOLI
      00006 PSAPUSER1I
      00007 PSAPCLUD
      00008 PSAPSOURCED
      00009 PSAPBTABI
      00010 PSAPLOADI
      00011 PSAPCLUI
      00012 PSAPDOCUI
      00013 PSAPSTABD
      00014 PSAPPROTI
      00015 PSAPBTABD
      00016 PSAPPROTD
      00017 PSAPLOADD
      00018 PSAPSOURCEI
      00019 PSAPUSER1D
      00020 PSAPSTABI
      00021 PSAPDOCUD
      00022 PSAPPOOLD
      00023 PSAPDDICI
      00024 PSAPES46BD
      00025 PSAPES46BI
      00026 PSAPEL46BD
      00027 PSAPEL46BI
      00028 SYSTOOLSPACE
      00029 PSAPDIMD
      00030 PSAPDIMI
      00031 PSAPODSD
      00032 PSAPODSI
      00033 PSAPFACTD
      00034 PSAPFACTI
      00035 PSAPPEL640D
      00036 PSAPES640D
      00037 PSAPEL640D
      00038 ZSAPBTABD
      00039 ZSAPBTABI
        Comment: DB2 BACKUP PRD ONLINE
    Start Time: 20070603230002
       End Time: 20070604050110
         Status: A
      EID: 40823 Location: /dev/rmt1
    SQLCA Information
    sqlcaid : SQLCA     sqlcabc: 136   sqlcode: -2419   sqlerrml: 9
    sqlerrmc: /dev/rmt1
    sqlerrp : sqlubMWR
    sqlerrd : (1) 0                (2) 0                (3) 0
               (4) 0                (5) 0                (6) 0
    sqlwarn : (1)      (2)      (3)      (4)        (5)       (6)
               (7)      (8)      (9)      (10)       (11)
    sqlstate:
    can i know what is this

    Hello,
    that's what db2 ? tray to say:
    db2 '? sql2419'
    SQL2419N The target disk "" has become full. 
    Explanation:
    During the processing of a database utility, the target disk
    became full.  The utility has stopped and the target is
    deleted. 
    User Response:
    Ensure enough disk space is available for the utility or direct
    the target to other media, such as tape. 
    On unix-based systems, this disk full condition may be due to
    exceeding the maximum file size allowed for the current userid. 
    Use the chuser command to update fsize.  A reboot may be
    necessary. 
    On non unix-based systems, this disk full condition may be due
    to exceeding the maximum file size allowed for the operating
    system.  Direct the target to other media, such as tape, or use
    multiple targets. 
    I hope this is helpful for you.
    Best regards,
    Joachim Müller

  • Task sequence failed with error code 0x80070002

    I am facing issue in OS deployment my machine PXE boot successfully but on the step of apply operating I got an error "task sequence failed with error code 0x80070002" 
    I see lot of thread describes to add Network Access Account I already added but still I receive same error please help
    Usama Arif

    i had this happen on two of my dp's the other day.  It drove me nuts,  I ended up  removing the DP Role,  removing the server from SCCM
    I then deleted all files on the  'D :'  drive
    after everything was deleted, I re-added the  Server to SCCM and gave it the DP Role back. 
    I then added the DP Back to the  DP Group to receive all packages that was on it before.    then finally once everything was re-uploaded my users were able to pxe boot again

  • 2012 Essential R2 Backup unsuccessfull with error code 2147942634

    Hi, a planned backup on win srv 2012 essentials R2 terminates unsuccessful with error code 2147942634 and the text "more data is abailable" when beginning backup with the EFI start partition. The other, usually follwing backup-locations,
    do not start backup thereafter. Every 2nd backup seems to be affeted. Manually started backups work fine. Mike.

    Hi Mandy,
    some more monitoring gets these additional info:
    - no, it's not a question about "backup once" or scheduled. Every second scheduled backups does not run (backup schedule ist daily 12:00 and 23:00. 12:00 backups are fine, 23:00 backups fail)
    - the recommended article provides no help, but checking the event viewer windows aplication points to error ID 517:
    - details to this error ID 517:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
      <Provider Name="Microsoft-Windows-Backup" Guid="{1DB28F2E-8F80-4027-8C5A-A11F7F10F62D}"
    />
      <EventID>517</EventID>
      <Version>1</Version>
      <Level>2</Level>
      <Task>0</Task>
      <Opcode>0</Opcode>
      <Keywords>0x8000000000000000</Keywords>
      <TimeCreated
    SystemTime="2015-03-02T22:02:44.547827700Z" />
      <EventRecordID>135619</EventRecordID>
      <Correlation
    />
      <Execution ProcessID="4648" ThreadID="11988" />
      <Channel>Application</Channel>
      <Computer>S12ER.SV.local</Computer>
      <Security UserID="S-1-5-18" />
      </System>
    <EventData>
      <Data Name="BackupTime">2015-03-02T22:00:19.562212400Z</Data>
      <Data Name="ErrorCode">0x800700ea</Data>
      <Data Name="ErrorMessage">%%2147942634</Data>
      </EventData>
     </Event>
    Mike

  • Time Machine. Backup failed with error code: 21

    Hi,
    I recently upgraded to Leopard 10.5.4 mainly for the time machine backup. I'm using a DNS-323 in a RAID1 configuration as the TM backup drive. Also I have the DNS-323 connected to my Airport Extreme through the ethernet to give NAS ability to my home network.
    After much hunting around the forums I got the sparsebundle created and copied to the DNS-323 share volume. See http://www.flokru.org/2008/02/29/time-machine-backups-on-network-shares-in-leopa rd/ My thanks to flokru.
    However, TM is still not working. The console messages have the following:
    Network mountpoint /Volume/Volume_1 not owned by backupd... remounting
    Network volume mounted at /Volume/Volume11
    Failed to mount disk image /Volume/Volume1_1/MacBook001b6334c307.sparebundle
    Backup failed with error: 21
    It would appear this error lies in the way TM is trying to mount the volume, specifically that Volume_1, the DNS-323 volume name, is not owned by TM. TM then tries to create a new volume, Volume11 and stick the sparebundle on it.
    Is there a way of making TM "own" the volume, Volume_1?
    Has anybody else seen this error or better yet, got a fix for it?

    James,
    It would appear this error lies in the way TM is trying to mount the volume, specifically that Volume_1, the DNS-323 volume name, is not owned by TM. TM then tries to create a new volume, Volume11 and stick the sparebundle on it.
    Is there a way of making TM "own" the volume, Volume_1?
    Actually, it is not TMs failure to mount the volume that is causing your failure to backup. I have received the same Console message using a Time Capsule. However, Time Machines' attempt to 'remount' the volume always succeeds and the backup goes through. That appears not to be your experience, but it is NOT because the volume is not being mounted. It is.
    *Mount Point Conflict (TMDisk-1)*
    NOTE: the following distinguishes “network drive” (the physical hard disk) from “disk image” (the sparsebundle file TM uses to backup to).
    First of all, I am convinced that the second mount point that is created (in your case Volume11) is due to the fact that you already had the network drive mounted on your desktop at the time of the attempted backup. Was that the case?
    When you manually mount a network drive the system creates a mount point in the /Volumes folder (Let’s call it TMDisk ). While that exists any attempt by Time Machine to mount the same disk will created a second mount point ( TMDisk-1 )
    Nevertheless, as I have observed, this doesn't seem to prevent backups from taking place successfully, at least on the Time Capsule. And according to your Console logs it appears that your volume is being ‘remounted’ successfully.
    *”The Backup Disk Image Could Not Be Mounted”*
    The real issue is Time Machines' failure to mount the disk image (sparsebundle) contained on your network drive.
    +Failed to mount disk image /Volume/Volume1_1/MacBook001b6334c307.sparebundle+
    +Backup failed with error: 21+
    More often than not this is due to having the Time Machine backup disk image (sparsebundle) mounted on your desktop during a backup attempt.
    Eject the backup disk image (sparsebundle) by either clicking the little Eject icon to the right of the disk image in the Finders’ Sidebar, or Ctrl-Click the drive icon on the desktop and select “Eject” from the contextual menu. Now try backing up again or launching Time Machine to view previous backups.
    For more information, see an article on this here:
    [http://discussions.apple.com/thread.jspa?threadID=1715977]
    Alternatively, a backup disk image can fail to mount if there is a problem with your computer name.
    *Proper Computer Name* #
    Make sure your computer has a proper name. Go to System Preferences --> Sharing. Time Machine needs to differentiate your computer from others on your network (i.e. "Bills MacBook" or "Office iMac"). If the "Computer Name" field is blank, create a name. Realize that if this step is necessary, you will likely have to start the Time Machine backup process over again and do another full initial backup.
    According to THIS article [http://support.apple.com/kb/TS1760], Time Machine may experience problems if your computer name includes certain characters. Make sure the computer name only includes ASCII characters from the following set.
    (0123456789abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ)
    Once a change in the computer name occurs, you should stop and restart Sharing on the affected computer. Uncheck and then recheck Sharing in the Services list on the left.
    Let me know if any of this helps.
    Cheers!

  • Windows 2008 backup failed with error code '2155348040'

    Hello,
    For the backup of our Windows 2008 servers, we use Windows Server backup. On one of the servers the backup will not run. In the application eventlog of the server there is the following message:
    Log Name:      Application
    Source:        Microsoft-Windows-Backup
    Date:          2/16/2010 9:00:03 PM
    Event ID:      546
    Task Category: None
    Level:         Error
    Keywords:     
    User:          <user>
    Computer:      <computer>
    Description:
    Backup attempted at '2/16/2010 8:00:03 PM' failed to start, error code '2155348040'.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-Backup" Guid="{1db28f2e-8f80-4027-8c5a-a11f7f10f62d}" />
        <EventID>546</EventID>
        <Version>0</Version>
        <Level>2</Level>
        <Task>0</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8000000000000000</Keywords>
        <TimeCreated SystemTime="2010-02-16T20:00:03.559Z" />
        <EventRecordID>33498</EventRecordID>
        <Correlation />
        <Execution ProcessID="4744" ThreadID="3516" />
        <Channel>Application</Channel>
        <Computer>...</Computer>
        <Security UserID="S-1-5-21-3054417077-3708097399-2792259940-500" />
      </System>
      <EventData>
        <Data Name="BackupTime">2010-02-16T20:00:03.559Z</Data>
        <Data Name="ErrorCode">2155348040</Data>
        <Data Name="ErrorMessage">%%2155348040</Data>
      </EventData>
    </Event>
    Does anyone know how to solve this problem?
    Best regards.
    Wilfred van der Heijden

    Hello Wilfred,
      thank you for bringing your concerns to us. 
      The error code  2155348040 indicates BLB_E_BACKUP_TARGET_SPACE_NOT_ENOUGH which happens if the target volume size is not
      sufficient to create a backup. In your case the total used space of source volume(s) could be greater than the space on the target volume.
      So please check the free and used space on the source volumes and retry the backup with the target volume space greater than that total
      space. We recommend the target volume size to be 1.5 times of the total size of all the source volumes for scheduled backups so that you
      can have sufficient number of backup versions stored.
      If you are using Block Level Backup then one other possiblity could be that your source volume is fragmented causing the backup size to be
      more than expected. If that is the case then retry the backup after defragmenting the source volume.
    Thanks,
    Bikash Agrawala [MSFT]
    --------------------------------------------------------------------------------- This posting is provided "AS IS" with no warranties, and confers no rights

  • Acrobat XI installation failure, with error codes

    I've tried but failed to install Acrobat XI twice from Creative Cloud, but the program showed up as installed in Win8 control panel. I uninstalled and tried again, failed, but captured the error codes as follows (hope someone can help):
    Exit Code: 7
    Please see specific errors below for troubleshooting. For example, ERROR:
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 3 error(s)
    ----------- Payload: Acrobat Professional 11.0.0.0 {23D3F585-AE29-4670-8E3E-64A0EFB29240} -----------
    ERROR: Error 1935.An error occurred during the installation of assembly component {63E949F6-03BC-5C40-A01F-C8B3B9A1E18E}. HRESULT: 0x800736B3.
    ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
    MSI Error message: Error 1935.An error occurred during the installation of assembly component {63E949F6-03BC-5C40-A01F-C8B3B9A1E18E}. HRESULT: 0x800736B3.
    ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603

    Okay, so I've looked at posts with similar issues and error codes and they all seem to point in somewhat different directions and tend to relate to earlier product and OS versions but then I decided to look for the installation files in C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat and found the Acrobat.exe file. It successfully launched the application, which appears to have installed properly (still testing that theory). The launch icons appear on the Win8 Start menu and the Control Panel\Programs\Programs and Features indicates the program has been installed. Apparently, the only issue remaining is that the CC App Manager shows the install as failed. Something failed, not sure what but it may have been the final hand-off of the process to CC App Manager. But I'm just guessing.

  • Backup Error Code 0x80070002

    New desktop, trying to do its first BU to an external usb connected drive that is 500GB and freshly formated (NTFS) on this system. BU fails after about 60% complete with error code 0x80070002. No further details, no mention of skipped or not found files, etc. Desktop has 6GB RAM and Nvidia GeForce 705 1GB graphics. BU works OK if saved to (6) DVD's.
    Already tried the commonly reccomended solution of MS patch KB976972. When trying to install it reports "update not applicable" and doesn't complete.  On another forum I saw an older entry about assigning a letter to a hidden partition that fixed this problem for  lot of people. I am not sure what that is all about.
    Is there a solution I can implement to fix this problem?
    Thanks!
    Ted

    New info re:my backup problem. Moved external HDD to one of the USB 2.0 ports in the back of the system and everything worked OK. So its specifically the 3.0 USB ports.
    If there is a resolution to this issue I would be interested in implementing it, the 2.0 ports are very slow but at least they work.  If no solution, well, I can get a backup and an system image copy so I am good for now. I'll watch this post for a while to see if something comes up. If not I'll close out as resolved.
    All the Best,
    Ted

  • Lock Screen Group Policy - Error code 0X80070002

    Hi
    I'm trying to update the workstation policy (2008R2) to show a new Lock Screen for our users.
    I have two policies:
    -Windows 7 Workstation Policy
    -Windows 8.1 Workstation Policy
    It was no problem for our Windows 7 machines.
    Windows 8.1 however wouldn't change.
    The picture downloads successfully to the client directory I specified in the policy, resolution and size are ok.
    I've tried deleting the sysdata folder on test machines (This left me with a blue lock screen, but still better than what they chose ;)
    I've tried default and unique filenames, and different folder locations under 'Force A Specific Lock Screen'
    I've disabled/enabled 'Force a Specific Lock Screen'
    I came across this warning on the client test machine:
    The computer 'backgroundDefault.jpg' preference item in the 'Win8.1 Policy}' Group Policy Object did not apply because it failed with error code '0x80070002 The system cannot find the file specified.' This error was suppressed

    Hi ,
    Can you please post the gpresult report here? And also ensure there is no policy processing failure in the problematic machines. That you can verify by seeing the gpsvc logs.
    Regards, Prabhu

  • DAG - Backup failing on 1 DB only with error - The Microsoft Exchange Replication service VSS Writer instance ID failed with error code 80070020 when preparing for a backup of database 'DB012'

    Hi Board,
    i´ve search across the board, technet and symantec sites but did not found a hint about my problem.
    we drive a 2 node DAG (Location1-Ex1-mb1 
    Location2-exc1-mb1), on SP2 RU4 patchlevel with 40 Databases.
    Since some time the backup of one - and only one DB - is failing with these events, logged on the Mailboxserver on which the passive DB is hosted.
    Log Name:      Application
    Source:        MSExchangeRepl
    Date:          28.09.2012 00:37:17
    Event ID:      2112
    Task Category: Exchange VSS Writer
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      Location1-Exc1-MB1
    Description: The Microsoft Exchange Replication service VSS Writer instance 1ab7d204-609a-4aea-b0a7-70afb0db38de failed with error code 80070020 when preparing for a backup of database 'DB012'.
    Followed by
    Log Name:      Application
    Source:        MSExchangeRepl
    Date:         
    01.10.2012 03:33:06
    Event ID:      2024
    Task Category: Exchange VSS Writer
    Level:         Error
    Keywords:      Classic
    User:         
    N/A
    Computer:      Location1-Exc1-MB1
    Description:
    The Microsoft Exchange Replication service VSS Writer (Instance 42916d80-36c1-4f73-86d0-596d30226349) failed with error 80070020 when preparing for a backup.
    The backup Application - Symantec Backup Exec 2010 R3 – states, this error
    Snapshot provider error (0xE000FED1): A failure occurred querying the Writer status.
    Check the Windows Event Viewer for details.
    Writer Name: Exchange Server, Writer ID: {76FE1AC4-15F7-4BCD-987E-8E1ACB462FB7}, Last error: The VSS Writer failed, but the operation can be retried (0x800423f3), State: Stable (1).
    Symatec suggests within http://www.symantec.com/business/support/index?page=content&id=TECH184095
    to restart the MS Exchange Replication Service – BUT the mentioned eventID
    8229 isn´t present on any of the both Mailboxservers.
    The affected Database is active on Location2-Exc1-Mb1 Server and in an overall healthy state. I found during my research, that below Location2-Exc1-Mb1 Server, there are not removed shadow copies present!
    This confuses me, since all Backups are normally taken from the passive copy of a Database.
    So my questions to the board are:
    * Does anyone is facing similar issues?
    * Can someone explain why snapshots are present on the Mailboxserver hosting the Active Database, whilst the errors are logged on the passive one?
    -          * Does someone know the conditions, why shadows copies remain and
    aren´t removed in a proper manner?
    What can cause the circumstance, that only 1 DB is facing such issues?
    Any suggestion is welcome!
    BR
    Markus

    Hi Lenora,
    I´ve encreases VSS / Exchange Backup Log levels to expert, before starting
    those things i´ve all tried now:
    - Backup from passive DB (forced within Symantec Backup Exec)
    - Backup from active DB (forced within Symantec Backup Exec)
    - Backup from passive DB without GRT enabled (forced within Symantec Backup Exec)
    - Backup from active DB without GRT enabled(forced within Symantec Backup Exec)
    All those attempts failed.
    But brought some more details - the backup against the active DB states, that there is still a backup in progress and therefore this backup is cancelled by VSS.
    The Solution was, that i´ve needed to restart the Exchange Replication Service on the Mailbox Server hosting the passive DB.
    Backups are working again on all DBs!
    THX for your replys.
    Best regards
    Markus

  • Error code: 0x80070002 while attempting back up

    Just upgraded Vista to Windows 7 Home Premium. When attempting to back up to an external hard drive with Windows back up in control panel it stops at about 20% completed and gives me the error code: 0x80070002. What can I do to fix this so that I can back up?

    Hi NubeeW7,
    This issue may occur if there are duplicate accounts on the computer.
    Please try the following suggestions and see if the issue can be resolved:
    Step 1: Backup registry key
    ==============
    1. Click Start, click Run, input "REGEDIT" (without quotation marks) in the Search box and press Enter.
    2. Navigate to the following registry key by expanding the "+" beside the registry tree in the left pane:
    HKEY_LOCAL_MACHINE/Software/Microsoft/Windows NT/CurrentVersion/ProfileList
    3. Right click on "ProfileList", click "Export"; please name the file as "RegBackup" (without quotation marks) and then save it to the C:\ drive as a backup.
    Note: In case we need to undo the modification, we can double click this RegBackup.reg file to restore the registry key.
    Step 2: Delete the duplicate account
    ===============
    1. Click the Start button, type “regedit” (without quotation marks) in the Search box and press Enter.
    2. Navigate to the following registry key by expanding the "+" beside the registry tree in the left pane:
    HKEY_LOCAL_MACHINE/Software/Microsoft/Windows NT/CurrentVersion/ProfileList
    3. Delete the duplicate profile list keys there.
    4. Exit the registry editor and reboot the computer to check the results.
    Please check if the issue can be resolved.
    Regards,
    Linda

  • Client push error CcmSetup failed with error code 0x8007064c

    Installing file 'C:\WINDOWS\ccmsetup\Silverlight.exe' with options '/q'.
    File 'C:\WINDOWS\ccmsetup\Silverlight.exe' returned failure exit code 1612. Fail the installation.
    InstallFromManifest failed 0x8007064c
    ITaskScheduler::Delete failed to delete task Configuration Manager Client Retry Task (0x80070002).
    CcmSetup failed with error code 0x8007064c
    This error i faced while Upgrading client on Windows Server 2003 ,that i upgraded my SCCM 2012 SP1 to SCCM2012 R2 
    i tried to uninstall the client and done successfully , while pushing the client again I've the same Error code.
    i searched and found SMS 2003 toolkit 2 fixed the problem for some people but i did not .

    <![LOG[==========[ ccmsetup started in process 8108 ]==========]LOG]!><time="15:37:25.641-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="ccmsetup.cpp:9437">
    <![LOG[Running on platform X86]LOG]!><time="15:37:25.641-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="util.cpp:1837">
    <![LOG[Updated security on object C:\WINDOWS\ccmsetup\cache\.]LOG]!><time="15:37:25.641-180" date="08-05-2014" component="ccmsetup" context="" type="0" thread="5432" file="ccmsetup.cpp:9281">
    <![LOG[Launch from folder C:\Setup\Client\]LOG]!><time="15:37:25.641-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="ccmsetup.cpp:721">
    <![LOG[CcmSetup version: 5.0.7958.1000]LOG]!><time="15:37:25.641-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="ccmsetup.cpp:727">
    <![LOG[Running on 'Microsoft(R) Windows(R) Server 2003, Standard Edition' (5.2.3790). Service Pack (2.0). SuiteMask = 272. Product Type = 18]LOG]!><time="15:37:25.876-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="util.cpp:1919">
    <![LOG[Ccmsetup command line: C:\Setup\Client\ccmsetup.exe  SMSSLP=ldcsccm1v.linkdc.local  SMSSITECODE=ldc DNSSUFFIX=linkdc.local]LOG]!><time="15:37:25.876-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="ccmsetup.cpp:3590">
    <![LOG[Command line parameters for ccmsetup have been specified.  No registry lookup for command line parameters is required.]LOG]!><time="15:37:25.876-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="ccmsetup.cpp:3775">
    <![LOG[Command line: C:\Setup\Client\ccmsetup.exe  SMSSLP=ldcsccm1v.linkdc.local  SMSSITECODE=ldc DNSSUFFIX=linkdc.local]LOG]!><time="15:37:25.876-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="ccmsetup.cpp:3776">
    <![LOG[SslState value: 224]LOG]!><time="15:37:25.876-180" date="08-05-2014" component="ccmsetup" context="" type="0" thread="5432" file="ccmsetup.cpp:4425">
    <![LOG[No version of the client is currently detected.]LOG]!><time="15:37:25.907-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="ccmsetup.cpp:2748">
    <![LOG[Updated security on object C:\WINDOWS\ccmsetup\.]LOG]!><time="15:37:25.938-180" date="08-05-2014" component="ccmsetup" context="" type="0" thread="5432" file="ccmsetup.cpp:9281">
    <![LOG[A Fallback Status Point has not been specified.  Message with STATEID='100' will not be sent.]LOG]!><time="15:37:25.938-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="ccmsetup.cpp:9763">

  • Failed to evaluate package P01000XX, Error code 0x80070002

    I have a package that got deleted while it still had all the DP's listed under content location, so now I have every site flagged with a big yellow warning.
    Not really a big deal but before I could just look at all 54 secondary's at a glance and see green but now I have to select each one to check its status.
    Anyone know how to remove it like it never existing so my update status points will go back to green?

    Hi,
    Does the smsdpmon.log still say "Failed to evaluate package P01000F3, Error code 0x80070002" now?
    Please check the blog below.
    If the package is not on the site, you must remove the package from WMI on the distribution point. The namespace to connect to is root\sccmdp.
    Troubleshooting Content Mismatch Warnings on a Distribution Point in
    System Center 2012 Configuration Manager
    Best Regards,
    Joyce
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Maybe you are looking for