Secondary method is not working

Hello,
I have a problem with my secondary method. I created a method Z_Call_ME23N for my purchase order release workflow and added it as a secondary method to my user decision step.
In testing in swo1 is no problem. Also the authorization test in SU53 are ok.
But when I try to open my workitem a message box comes up: 'Error when starting submethod'.
How can I check it what I have done wrong?
Thanks for your help,
Christoph

Hi Martin,
thanks for your answer.
I have BUS2012 in my WF container, and it is delegated to ZBUS2012 (so I was wrong to say it is ZBUS2012).
I also have the BO in the decision step (wondered if I was wrong - I made a copy of the standard decision task to add my own container element in the copy - this is the task I am now using).
So actually my bindings for this step is:
BUS2012 (delegated to ZBUS2012) --> BUS2012
is that right?
Unfortunatly it is still not working.
I also tried to clear the buffer (as it says so in others posts), checked the authorizations,etc.
Thanks a lot for you ideas, it is still my first workflow and I don´t know where else I could take a look to get some help.
Christoph
Edited by: Christoph on Jan 30, 2008 3:23 AM

Similar Messages

Why is my secondary click is not working on the right?

why is my secondary click is not working on the right?

system preferences/Trackpad/point and click
check and uncheck secondary click or alter method
Try SMC reset
http://support.apple.com/kb/HT3964
Pram Reset
http://support.apple.com/kb/ht1379

TS4139 I had 2 MobileMe email addresses, but only went thru ICloud process with one (my main address). Now the secondary address is not working with iCloud. Did I have to go thru the process with both addresses? Can I get that address back?

I had 2 MobileMe email addresses, but only went thru iCloud process with one (my main address). Now the secondary address is not working with iCloud. Did I have to go thru the process with each address? Can I still get that secondary address to work with iCloud?

It was totally separate. I just now went back to a previous email from Apple to that secondary address which urged me to transition to iCloud. I followed the link and it prompted me thru the process and the address is now able to send/receive emails. Thanks.

ExportAsFDF javascript method is not working with Reader 10.1.1

Hi,
I have pdf document in which I have applied all Extendend Reader Rights. And now when I am trying to exports alll annotation in fdf with Reader 10.1.1 then it is faling to export. However it is working fine with Reader 10.0.0. Looks like this is broken in later version of 10.0.0.
Please let me know if any alternative solution is there to export all annotation in fdf file thru code.
Regards,
Arvind

I would open a formal support ticket with our developer support folks.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Sun, 27 Nov 2011 22:48:35 -0800
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: exportAsFDF javascript method is not working with Reader 10.1.1
exportAsFDF javascript method is not working with Reader 10.1.1
created by arvindg007<http://forums.adobe.com/people/arvindg007> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/4049525#4049525

OS X Lion secondary click is not working, any help

Since I`ve downloaded Lion, the secondary click does not work, I can´t even select it on the trackpad window

More details needed.
Are you using an Apple mouse or a 3rd party mouse? Can you enable it in System Preferences > Mouse? Can you Control + click and get the menu like you would when you use secondary click?

How do I print in B&W now that I have lion? The whole "open in preview" method is not working. Thanks

Subject says it all.....The whole "open in preview" method is not working. Any ideas or solutions would be appreciated. Thanks

What kind of printer do you have? Have you looked at their PDEs to see if there are any settings for color/b&w?
How is the "open in Preview" not working? Please provide some details.

REP-51018 -- cookie method is not working :(

Trying to invoke a simple report from a simple form by using web.show_document()
if I pass the userid=x/y@z then it work fine
if I try to use the cookie method as defined in the OTN whitepaper "Secure Web.Show_Document() calls to Oracle Reports", I am bumping to the REP-51018 error.
Tried the metalink and found primarily 2 documents, one (note#279938) is suggesting using
SYNCHRONIZE; prior to invoking the WEB.SHOW_DOCUMENT(...), which I did - not worked,
then I read the document (#309652.1) which tells that the cookie method will not work if not using fully qualified domain name -- I have a fully qualified domain name and I can see in the browser cookie settings that the domain is set correctly.
I also edited the basejini.htm and basejpi.htm files and added the suggested entries as shown in the same OTN whitepaper (page #9). And recycled the entire iAS server after all the editing (reports.sh, formsweb.cfg, etc).
I can see the cookie is saved on the client browser and the userid is displayed in the JInitiator control window.
FrmReportsInteg0: Debugging true
FrmReportsInteg0: Adding new userid string "zafer/mutlu@jtls5"
FrmReportsInteg0: Default cookie domain: .rolands.com
FrmReportsInteg0: set RW_AUTH10g
FrmReportsInteg0: Arguments: encryptionKey=reports9i; Reports version=RW10g
FrmReportsInteg0: Cookie value for RW10g is: zafer/mutlu@jtls5;1135302256455:30
FrmReportsInteg0: Encoded cookie value is: W3zbSs88ClXKCO9kxqPbyQiyd120sKakxxmhtfgtZoUe4Q==
FrmReportsInteg0: Complete cookie string is: userid=W3zbSs88ClXKCO9kxqPbyQiyd120sKakxxmhtfgtZoUe4Q==
FrmReportsInteg0: Added domain ".rolands.com" to cookie
FrmReportsInteg0: Generated Cookie String: userid=W3zbSs88ClXKCO9kxqPbyQiyd120sKakxxmhtfgtZoUe4Q==; domain=.rolands.com; path=/
liveconnect: JSObject::eval(document.cookie="userid=W3zbSs88ClXKCO9kxqPbyQiyd120sKakxxmhtfgtZoUe4Q==; domain=.rolands.com; path=/")
liveconnect: the url of the applet is http://raptus.rolands.com:7778 and the permission is = false
FrmReportsInteg0: NS Cookie Set
network: Connecting http://raptus.rolands.com:7778/forms/lservlet;jsessionid=0a0a0a2230d8a457f8e558fe43b4b3e5a9b908500738.e38Oc3aQc3ySci0TbheLaNuSah50n6jAmljGr5XDqQLvpAe with proxy=DIRECT
network: Connecting http://raptus.rolands.com:7778/forms/lservlet;jsessionid=0a0a0a2230d8a457f8e558fe43b4b3e5a9b908500738.e38Oc3aQc3ySci0TbheLaNuSah50n6jAmljGr5XDqQLvpAe with cookie "userid=W3zbSs88ClXKCO9kxqPbyQiyd120sKakxxmhtfgtZoUe4Q=="
network: Connecting http://raptus.rolands.com:7778/forms/lservlet;jsessionid=0a0a0a2230d8a457f8e558fe43b4b3e5a9b908500738.e38Oc3aQc3ySci0TbheLaNuSah50n6jAmljGr5XDqQLvpAe with proxy=DIRECT
network: Connecting http://raptus.rolands.com:7778/forms/lservlet;jsessionid=0a0a0a2230d8a457f8e558fe43b4b3e5a9b908500738.e38Oc3aQc3ySci0TbheLaNuSah50n6jAmljGr5XDqQLvpAe with cookie "userid=W3zbSs88ClXKCO9kxqPbyQiyd120sKakxxmhtfgtZoUe4Q=="
The only thing I can see is this line:
liveconnect: the url of the applet is http://raptus.rolands.com:7778 and the permission is = false
if this is the problem how can I fix it?
What is wrong with this cookie method? What I am doing wrong?
Any input is appreciated very much.
Zaf.

Here is the code I am using in a when-button-pressed trigger in the form to invoke the report.
And yes, the javabean USERID_BEAN is created/defined under the CONTROL block, with all the properties as explained in the OTN whitepaper.
thank you.
=================================================
message('Invoking the related report...', ACKNOWLEDGE);
message(' ', NO_ACKNOWLEDGE);
DECLARE
rep_url varchar2(2000);
user_name varchar2(40);
passwd varchar2(40) ;
connectstring varchar2(20) ;
BEGIN
user_name := LOWER(get_application_property(username));
passwd := LOWER(get_application_property(password));
connectstring := LOWER(get_application_property(connect_string));
rep_url:='/reports/rwservlet?&envid=jtlsDDS&&report=readme.rdf'
||'&desformat=htmlcss&destype=cache&userid=';
-- Write log messages to the Forms JInitiator console. The next line must
-- be disabled before running this code in any production environment
set_custom_property('CONTROL.USERID_BEAN',1,'WRITE_LOGOUTPUT','true');
-- set userid in encrypted cookie before calling Web.Show_Document()
set_custom_property('CONTROL.USERID_BEAN',1,'ADD_USERID',
user_name||'/'||passwd||'@'||connectstring);
-- writing the cookie
set_custom_property('CONTROL.USERID_BEAN',1,'WRITE_USERID_COOKIE','10g');
-- Add the next line to correct REP 51018 error
SYNCHRONIZE;
WEB.SHOW_DOCUMENT(rep_url,'_blank');
END;

Instance Dependent Public Method is not working for Workflow

Hello Experts,
I have made Custom class for a workflow. This class is triggering the WF fine but the problem is while trying to execute a WF task which contains a Instance Dependent & Public method its not working , the WF task is not processing though I'm passing the instance of the class properly from WF to WF task . When I'm changing the method to Static & Public then the workitem is executing perfectly. Can you please help & suggest the way to find the problem ?
Thanks & Regards ,
Jeet

Are you absolutely sure that you have the instance of the object in the workflow container? Open the technical log the see if the object instance is there - or is the container element initial (or "not set")?
yes it is instantiated properly no error over there.
What about if you test the method directly in SE24 (as an instance method)? Is it working then? If you can make it work in SE24 as an instance method and you are sure that the instance exists in the workflow,
I have checked the class in a stand alone run in this case also it runs fine as before.
The obvious question of course is that have you implemented the IF_WORKFLOW interface methods (the two first ones).
it is coded like below
BI_PERSISTENT~FIND_BY_LPOR
create object result
      type
        (lpor-typeid)
      exporting
        ip_key = lpor-instid.
CONSTRUCTOR
   me->m_KEY    = ip_key.
   me->m_por-catid = 'CL'.
   me->m_por-typeid = CL_ZZZ'.
   me->m_por-instid = me->m_key
BI_PERSISTENT~LPOR
result = me->m_por.
Main confusion is Method is working only if declared STATIC & PUBLIC but not for the INSTANCE DEPENDENT & PUBLIC.

Auto tab focus method is not working in iOS devices please share the ideas why its not working?

Auto tab focus method is not working in iOS devices. Please share the idear i am facing this issue while developing code for devices.

Hi there,
I can confirm this bug.
Not sure if this info is relevant, but this is my experience:
I am on the FIDO network, and so are two other people I know.
We all tried blocking numbers, and calls ring right through. Text messages are blocked successfully. (never tried facetime)
I also tried a ROGERS device running IOS7, and was successfully able to block my phone call from ringing through. HOWEVER, my call was forwarded to their voicemail, I was able to leave a voicemail for the person, and they did get an alert that they had a new voicemail.
I have not yet had a chance to test this on Bell, Telus, or any other carriers.
Spoke to Apple, and they advised me to do a hard reset (hold both buttons to shut off and reboot the phone), and if that fails to do an iOS restore.
I have yet to try this, but hopefully someone will have a better solution.

Repaint() method is not working in MAC IE

Hi All
why repaint method is not working in MAC IE ? What i am doing is in one class which is inheriting Canvas class getting the keybord input then adding it to main applet.
Please help me i am trying it for whole week and i couldn't find any solution. I didn't put my code but if anyone is willing to help me i can post it.
Thanks in advancs
Shan

Hi
Thanks for your reply. Actually i wrote simple applets and those are working well.
So i did debug the code and i found that when i am running the following code in Apple MAC IE, nothing is happening in handleEvent method. Especially it is not going into the if statement (if (evt.id==401)). here i am checking for KEY_PRESS. I also tried with keyDown method but same problem in MAC IE.
I am pasting the code that is giving me problem.
import java.awt.*;
import java.applet.*;
public class testApplet extends Applet
public void init()
setLayout(new BorderLayout());
editableArea = new EditableArea();
editableArea.setBackground(Color.yellow);
add("Center", editableArea);
EditableArea editableArea;
import java.awt.*;
public class EditableArea extends Canvas
String s = "";
public boolean handleEvent(Event evt)
if (evt.id==401)
if(evt.key >= 32 && evt.key <= 255)
char c = (char)evt.key;
s = s + c;
repaint();
return super.handleEvent(evt);
public void paint( Graphics g )
g.setColor(Color.blue);
g.drawString( s,5,15);
--------------------------------------------------------------------

Draw method is not working

Why the drawLine() is working only inside the paint method??
BufferedImage image = new BufferedImage(800,500,BufferedImage.TYPE_INT_ARGB);
     Graphics2D g = (Graphics2D)image.getGraphics();
public void paint(Graphics g)
               g.setColor(Color.black);
                         //Here, the drawLine() method works
               g.drawLine(50,0,50,150);
public void paintX(Graphics g,Point c)
                    //Here, the drawLine() method does not work
                    g.setColor(Color.black);
               g.drawLine(0-e,0-e,50-e,50-e);
               g.drawLine(0-e,50-e,50-e,0-e);
               repaint();
     }

er, unless you're using JDK 1.5 and it introduces methods I know nothing about, as far as I know
public void paintX(..) is not a AWT or Swing method. Thus it will never be invoked unless you call it.

Secondary monitor does not work after OS X install

My secondary monitor does not work well after OS X install. The image on my secondary monitor is different even the screen svaer image is different and the mouse can not be seen.

Try the easy thing first - NVRAM reset:
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
If that does not work, post back with more info, including the version of Mac OS you are running. How is the external monitor connected, did it ever work, and from what OS X to what was the "OS X install" in your title?

Method "show_doc_meta_data" not working for me in "cl_gui_ecl_2dviewer "

Hello all,
I want to show the meta-data within an image, when showed with the ECL-Viewer.
I performed the following steps in my ABAP-Code, but it is not working.
Creating an object of the class "cl_gui_docking_container"
Creating an object of the class "cl_gui_ecl_2dviewer" with a refernece of the container
Calling method "create_toolbar"
Calling method "open_document" with the path to the file and the file_type
Up to this point everything works without any problem.
But now I want to show my created META-DATA of the image, which I have added with the method "set_doc_meta_data".
After calling the method "show_doc_meta_data" the appended data is not visible on my image.
What going wrong in the method of my coding?
I am grateful for any help.
Best regards
Christian

Hi Christian
Did you solve this issue?
I'm trying to use Badi DOCUMENT_ECL01 to insert watermarks on some DMS documents but it's not working, maybe you could give me some advice.
Regards
Daniel

Secondary color correction not working in Premiere CC

Greetings,
I'm unable to build secondary color correction masks in Three Way Color Corrector, RGB Curves etc in the current version of Premiere CC.
In any of these plugins, when I check "show mask" I get the usual white slate filling the frame. But when I use the color picker to make a selection the whole frame stays white. It appears that I'm making selections but it's not building the mask for some reason. When making an extreme color change I can see that the mask is not building as it affects the whole frame.
This started after upgrading to CC. I've recently updated to the most up to date version (yesterday) and am still having the same problem.
Premiere CC 2014.1 Release
8.1.0 (81) Build
Macbook Pro Retina, 15" Late 2013
2Gh Intel Core i7
8Gb
Intel Iris Pro 1536Mb
Yosemite Version 10.10
*note-my Colleague is not having this problem, he's working on the same OS and same CC build but he has an Imac. So I'm guessing this problem is unique to my hardware config.
Anybody else have this problem or know of a fix?

I have the same Problem new MAC OS Premier Pro CC or Premier Pro CS6 both have an issue with the Title Tool. If you open the title tool and try to make color changes or change size of the font it sticks at the default color and default font. SOmetimes the title tool will work and then when I exit it's back to the default first type location, default font and default color. Sometimes it will not even let me exit the Title Tool.
Please help I have Projects I'm working on Deadlines and I pay a monthly Fee for Software that works and it's not working.
Model Name:          Mac Pro
Model Identifier:          MacPro5,1
Processor Name:          6-Core Intel Xeon
Processor Speed:          2.4 GHz
Number of Processors:          2
Total Number of Cores:          12
L2 Cache (per Core):          256 KB
L3 Cache (per Processor):          12 MB
Memory:          16 GB
Software OS X 10.9 (13A603)
Graphics ATI Radeon HD 5770 1024 MB

'NAVIGATE_ABSOLUTE' method is not working in UWL

We are working on Portal 7.0.
Recently We have upgraded from SP 13-0 To 13-5.
After this upgradation We are facing some problems, following is the scenario:
1.     We have a ABAP Web DynPro Application say 'A', which has button "View Details".
2.     On Clicking of "View_Details" We navigate to other ABAP Web DynPro Application say 'B' .
     This was done using the 'NAVIGATE_ABSOLUTE' method of the 'IF_WD_PORTAL_INTEGRATION'.
3.     Now The Same Application 'A' is being send as the Workitem to Approver's inbox.
4.     Approver also was able to click on 'View_Details' button and Application 'B' used to call using 'NAVIGATE_ABSOLUTE'.
5.     After upgradation, Point 2 is working fine. but point 4 is not working i.e. 'NAVIGATE_ABSOLUTE' functionality is not working when the application is send as workitem.
Please guide us for the above problem. Points assured for best solution.

Hi
Thanks for your reply. Actually i wrote simple applets and those are working well.
So i did debug the code and i found that when i am running the following code in Apple MAC IE, nothing is happening in handleEvent method. Especially it is not going into the if statement (if (evt.id==401)). here i am checking for KEY_PRESS. I also tried with keyDown method but same problem in MAC IE.
I am pasting the code that is giving me problem.
import java.awt.*;
import java.applet.*;
public class testApplet extends Applet
public void init()
setLayout(new BorderLayout());
editableArea = new EditableArea();
editableArea.setBackground(Color.yellow);
add("Center", editableArea);
EditableArea editableArea;
import java.awt.*;
public class EditableArea extends Canvas
String s = "";
public boolean handleEvent(Event evt)
if (evt.id==401)
if(evt.key >= 32 && evt.key <= 255)
char c = (char)evt.key;
s = s + c;
repaint();
return super.handleEvent(evt);
public void paint( Graphics g )
g.setColor(Color.blue);
g.drawString( s,5,15);
--------------------------------------------------------------------

Secondary method is not working

Similar Messages

Maybe you are looking for