Secondary monitor graphical issues

I have hooked up my Asus LCD monitor to my 2009 MacBook Pro and I am getting some graphical issues.
When I mouse click on an open window frame to move it, the window shakes and the buttons in it shake. So for example if I open finder window, click to drag it, all the icons and buttons inside shake.
I am connecting through hdmi, so have tried the other setting, i or p, not sure which, but that just makes the screen fuzzy.
Any ideas? Are there drivers I need?
Thanks
Gavin

For me:
Time Machine is still broken. When I "Enter Time Machine" all of my monitors go black (iMac) and the computer will not recover. A hard reset is needed. Any ideas?
I have no easy access to backups via TM (can get there with finder but not TM)
10.10.1
IMac 27" Mid "11
3.4GHz i7
20GB
iMac (27-inch Mid 2011), OS X Yosemite (10.10.1)

Similar Messages

GE70 2PE secondary monitor resolution issue

So I bought a MSi GE70 2PE yesterday and today I tried connecting it with my tv with HDMI, which has worked fine both with my stationary computer as well as other computers, using the same cable.
Today however when i plugged it into this laptop I got a low 1024 resolution on my tv and the settings for resolution wont allow me to change it to any higher and can't duplicate the screen and extention of screen isn't working properly either as all of my screen apparently can't fit into the 1024 resoltuion, trying to bypass this by changing the resolution while plugging in the HDMI cable the TV just turned black and no sound was transmitted with the HDMI cable.
As far as I can understand for some unknown reason the secondary monitor uses the intel integrated graphics card, I've update the drivers both for this and for the nvidia card.
As for updated drivers, yes all is updated and have tried the general common solutions, the computer was bought yesterday so having a hard time understanding how this can't work properly.
Thanks in advance for any solution.

Quote from: Aelfaeth;111797
So I bought a MSi GE70 2PE yesterday and today I tried connecting it with my tv with HDMI, which has worked fine both with my stationary computer as well as other computers, using the same cable.
Today however when i plugged it into this laptop I got a low 1024 resolution on my tv and the settings for resolution wont allow me to change it to any higher and can't duplicate the screen and extention of screen isn't working properly either as all of my screen apparently can't fit into the 1024 resoltuion, trying to bypass this by changing the resolution while plugging in the HDMI cable the TV just turned black and no sound was transmitted with the HDMI cable.
As far as I can understand for some unknown reason the secondary monitor uses the intel integrated graphics card, I've update the drivers both for this and for the nvidia card.
As for updated drivers, yes all is updated and have tried the general common solutions, the computer was bought yesterday so having a hard time understanding how this can't work properly.
Thanks in advance for any solution.
Actually there is some more questions according to your post:
1. Does the notebook display normally when it's not connected to any external monitor?
2. Where did you change the resolution when you try to bypass the issue? In Intel's graphics properties? or on TV?
3. How did you set the duplicate mode? by using Fn+F2 or WIN+P?

Lightroom 4.1 RC2 - Secondary monitor issue

Hi
lightroom 4.1 rc2 seems to have solved the crash issue when using a secondary monitor.
NOW i have another HUGE and HEAVY problem...
The image that appears in the secondary monitor have total different colors than the reality... and when switching the configuration ( so main window go into secondary monitor ) colors are fine ( so this isn't a bad configuration between monitor and lightroom.... ).
Images in secondary monitor appears less contrasted and greenish. And that's a big issue ( cause i use secondary monitor for the correct balancement for printing ).
I repeat that the main window of lightroom shows the image correctly when working with secondary monitor as main...

Known bug.
http://feedback.photoshop.com/photoshop_family/topics/lr4_rc2_differences_in_rendering_in_ library_and_develop_modules

Is it possible to force a fixed Application to open in a Secondary Monitor?

This is my first time actively using a forum, so forgive me if I'm unclear with my question or if I'm unaware of forum common sense or etiquette.
I've been running a Multi-Monitor system for awhile now at my office. I ran into a few problems when I first set it up, but was able to resolve many issues with many work-arounds. In truth, this is one of the same major problems I was having before.
As it says in my details, I have an iMac with a Wacom Cintiq 21UX via Mini DisplayPort to DVI, and an Apple Cinema Display via Arkview USB Display Adapter. I do a lot of graphical work amongst my many tasks, so the Cintiq is typically my main input device. I have it set in a Portrait position, which I prefer greatly over Landscape.
My problem is that to use many of the graphical applications, Adobe anything, I have to set it as the main monitor. Since Apple doesn't use application containers, at least, not in a way that allows you to drag the main toolbar. This solution, of course, I learned after a lot of struggle. It works and I'm fine with it now, but I've recently been called upon to use Final Cut and Motion for some projects and this problem has again reared its head, but in a different way.
I've programs set up all over my three screens; sized and set to where I like them and are most efficient, and across multiple Spaces. To properly run Final Cut, a resolution of 1280x800 is strongly recommended. Since I'm running Portrait, mine is set to 1200x1600. I didn't think much of Final Cut's initial warning at the time, since any windows caught outside the screen I was certain I could rescue with a trusty Applescript, written to collect all windows to the main screen. Which I discovered was a problem when running Final Cut from a laptop that was dual-monitored, but once you take away the secondary monitor the Final Cut windows remain floating aimlessly out of screen. They were floating off-screen, as I thought, and fixed it with the applescript. While I was working though, I was confused on where the **** the splice tool went. I looked everywhere in the application I could to find it, but it wasn't until I called a friend and he assured me that the tool actually did exist that I remember the teeny-tiny tool panel that would typically reside next to the timeline. The applescript can't pull it for some reason.
So my question, *is there a way in which you can change the display an application starts in?* (bolded for ease of discovery in this long post) what would fixedly open in the main display instead opening to a secondary monitor. Or, as consolation, possibly rescuing that tiny tool panel? Early on I tried keeping a shortcut key set to switch the main monitors back and forth, but found that applications will switch with them, applications I didn't want to switch. Plus, the Wacom Pen has to be re-calibrated when the Cintiq is switched to the secondary monitor, and then, of course, re-calibrated again when it's switched back to the main.
Any help would be greatly appreciated. Thank you.

All my Monitors are set to their native resolutions, 1280x800 is Final Cut's suggested optimal resolution. My Cintiq is a Tablet Monitor, one that allows you to write or draw upon the screen itself, as such, it's set upon an adjustable stand that will let you place the Tablet Monitor upright, semi-flat against the desk, or anywhere in-between, in addition to 360 degree rotation in its flat position. This means that the Tablet Monitor comes with two native resolutions, one for Landscape and one for Portrait. The Cintiq is purposely designed to allow it to be set in a Portrait position, for the comfort of the User. 1200x1600 is just as native for the Cintiq as 1600x1200. Also, my Office Desktop set-up is, God-willing, a permanent set-up; I don't disconnect Monitors, and they are set to Extended Desktop Mode.
My aim was to avoid switching back or forth between resolutions or Mirroring. This will work, yes, but having to do it every time I need to use Final Cut, or any other such program with odd monitor requirements, is a hassle. With all the various windows and applications I have running at any one time, I'll be wasting time moving and resizing windows across multiple Spaces back to where they were every time I need to run Final Cut, and re-calibrating the pen to the new resolution. Which is also a little embarrassing when I need to demo a clip for my bosses and co-workers and I have to spend time, in which I could be explaining things, tiding up my desktops. It would be ideal to have it prepared before they got there, (actually, ideal would be not having to prep it in the first place) but not all meetings are scheduled and planned.
As for windows that get lost in space, that's what the Applescript was for, but apparently that little tool panel, which is wholly more important than it's size suggests, doesn't register as a window and gets left behind.
So my hoped for solution is a way in which to force a Program that would normally load onto the Main Monitor to instead load on to a chosen Secondary Monitor, one that fills the necessary resolution requirements of said Program. I couldn't care less about the Applications need for the Main Toolbar since I run Secondbar anyhow.
This isn't a vital emergency though, I'm just trying to find a solution for an annoyance and to make the whole process more efficient. Oh well, C'est la vie.
Thank you for your reply Dennis.
Message was edited by: TimR.NSC

Dual Monitor Driver Issue t520

I have a t520 and I am trying to display to a Dell U3014 via the Display port and a Acer X223W monitor via the DVI-D.
When I originally connected both monitors, I could get them both to work in an extended desktop mode after I updated the display driver adapter (Intel HD Graphics 3000). However, once I rebooted the secondary monitor (Acer) is not recognized until I reinstall the driver updated.
I'm not sure what setting could be causing this issue? Has anyone else experienced this or have any suggestions on settings to check?

It plays fine if I'm only using one monitor. If I extend my windows desktop onto both it always screws up. Its not that it screws up when I try and play the video on the second monitor; it screws up when I try to play the video period. Whatever size I have the video playing on either monitor, the opposite monitor starts displaying a choppy full-screen version of the video. The playback in the regular video window is also poor.

Yosemite secondary monitor distortion

I have a 2010 Macbook Pro 15" with a GT330 M graphics card. Ever since installing Yosemite, the secondary monitor has been distorting when I use Mission Control. The distortion covers the entire screen and stays there until I move my mouse over the area or drag a window there to "refresh it". This only happens on the secondary monitor. When I go to Display settings and set my external monitor as the primary monitor, the distortion only happens on my Macbook Pro screen.
These two factors have made it difficult to pin down if it's a hardware or software issue. The computer shows distortion even at low load so I don't think the graphics card is overheating. Anyone else have the same issue? I've tried toggling transparency on and off to hopefully reduce the graphics load, but no luck.

Does the montior work via DVI on another device?
Have you tested the DVI monitor with HDMI to DVI adopter?
Mabe a bad mini display port to DVI adopter

Is there a way to set up a secondary monitor using an Envy 15t-j000 touchscreen with Windows 8

When I purchased my laptop, I was told that I could use a secondary monitor to view multiple documents, spreadsheets, websites, etc. I was also told that there would be a connection on the laptop, but there wasn't.
This question was solved.
View Solution.

Hi Phoenix,
I think you might enjoy reading this article:
What is the Difference Between HDMI and DVI? Which is Better?
Below is a short article about each type of connection: VGA, DVI, HDMI
Essentially, what you get, how much hassle you go through to understand and make a choice, is based on what you expect from the connection. VGA is low-res, dependable, and has been around the longest of the three types.
Decide Between VGA, DVI, and HDMI for Your Monitor Connection
I have not had any problems with any monitor when trying to connect it to Windows 8 -- the underpinings to Windows 8 are built from Windows 7. My experience: If the Monitor will connect to one, it should work on the other.
Some issues I have had with monitor connections include:
Nvidia graphics on a Win7 machine that had to be down-reved to work with one monitor (circa 2010?)
Irritating issues with the screen aspect ratio on a monitor that is forced to be connected to a system with a different native resolution than that of the monitor -- Do-able, just ps-ant irritating
Switching from one system to another when the monitor is connected to two separate notebooks that are up and running at the same time -- the "switch" is more seemless on some monitors than with others
Note that none of these issues are "show stoppers" for my purposes: I am not a gamer.
=====================================================================================
3 matches found for Envy 15t-j000
Select the model of your system below. You will find webpages for Software and Drivers, How-to information, manuals, and helpful advice on how to use your system and how to solve issues when they arise.
Please select one below:
HP ENVY 15-j000 Select Edition Notebook PC series
HP ENVY 15t-j000 Select Edition CTO Notebook PC
HP ENVY TouchSmart 15-j000 Select Edition Notebook PC series
HP ENVY TouchSmart 15t-j000 Select Edition CTO Notebook PC
HP ENVY 15-j000 Quad Edition Notebook PC series
HP ENVY 15t-j000 Quad Edition CTO Notebook PC
Happy Computing!
Kind Regards,
Dragon-Fur

Secondary monitor on 20"iMac, How to set portrait orientation when running

How do you set the display rotation in Windows XP?
I have a secondary monitor (wall-mounted at 90 degrees to normal) that OS X handles just fine (the display preference window provides a rotate function). However, when running Windows XP, the secondary monitor is still available, but I can not find a setting that will rotate the display. I downloaded the Apple Boot Camp ATI driver from AMD's site and the driver version went from 8.39 to 8.43. Still no visible way to rotate the secondary display. I then upgraded Boot Camp to 2.1 after which the ATI driver version went to 8.45. Still no rotate functionality.
I have tried using the ALT-OPTION-ARROW key with no success (recommended on some obscure Windows XP forum). I also downloaded the Apple Boot Camp Crystal Control Center from the AMD site, but it would not execute after installation (this upon yet another obscure recommendation).
I also have Windows XP on my MacBook. It uses an NVIDIA driver and it will allow display rotation.
Any help or advice is appreciated.

Updating my original post:
I have resolved the issue. The ATI Catalyst Control Center app (I meant Catalyst, not Crystal in my original post) needs Microsoft's .NET Framework 2.0, which was not included in my original Windows XP installation.
After downloading and installing the .NET Framework 2.0 package and reinstalling the Catalyst Control Center app, I am now able to rotate the secondary monitor display to the portrait orientation.
I use the secondary monitor primarily viewing on-line documentation while working with an application on the primary screen. The portrait orientation provides a much better environment for reading documentation as I can view 2+ pages at the same time.

Lenovo 3000 and a secondary monitor

I have a Lenovo 3000 V100 Laptop. I want to use a secondary monitor/display. I see the display on both the primary and secondary monitors until windows finishes booting and then the secondary monitor goes blank. I try FN F7 to no avail. I am using windows XP. I assume this is a setup problem.
Please advise.
David

Not having your exact model, try this.
Go to your desktop display.
Position your pointer over part of the display without any icons, open windows, or tasks.
Right click.
A menu should appear, click on "Properties" or "Graphics Properties" whichever is on the menu. This should open another menu, one tab on which can be selected to allow you to display the same thing on the internal and an external monitor. The graphics adapter software on my Lenovo displays its menu this way. I'm not sure if going through the Control Panel selection will get you to the same point.

GDM and Gnome graphical issues with Nvidia card

Hi !
I want to install archlinux with cinnamon as desktop environment on the computer of a friend, but I have some issue with it, and especially with (I think) the graphic card, it's a Nvidia GeForce FX 5200LE.
I tried installing nvidia-173xx from the aur first. I installed gdm, but it's extremly slow, as a result that I can't log in (nevertheless the mouse is fluid..) the cpu is not so much used yet, and it's the same thing in the cinnamon session or the gnome session (I tried installing lightdm to log in which works fine). Moreover, in the session I've got some strange graphical things, such as some missing white pixels, or a blue window when I launch nautilus, ... (here are some screenshots : http://i49.tinypic.com/2efhm6s.png and a with a window : http://i46.tinypic.com/116m05k.png)
I tried to install the nouveau driver instead, and now gdm don't freeze, I can log in, but there is always these strange graphical issues.
Is the graphic card too old for gnome ? Or did I forget something ?
Thank you in advance for your help !! And sorry for my english ..
Here are some log with the nouveau driver :
- Xorg.log :
[ 9.026]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 9.026] X Protocol Version 11, Revision 0
[ 9.026] Build Operating System: Linux 3.4.8-1-ARCH i686
[ 9.026] Current Operating System: Linux famille-workstation 3.5.3-1-ARCH #1 SMP PREEMPT Sun Aug 26 08:15:06 UTC 2012 i686
[ 9.026] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=83840f06-da6c-4558-a8ef-8ed779442ff3 ro quiet pci=nomsi
[ 9.026] Build Date: 27 August 2012 08:08:29AM
[ 9.026]
[ 9.026] Current version of pixman: 0.26.2
[ 9.026] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 9.026] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 9.027] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 5 13:26:01 2012
[ 9.053] (==) Using config file: "/etc/X11/xorg.conf"
[ 9.053] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 9.072] (==) No Layout section. Using the first Screen section.
[ 9.072] (==) No screen section available. Using defaults.
[ 9.072] (**) |-->Screen "Default Screen Section" (0)
[ 9.072] (**) | |-->Monitor "<default monitor>"
[ 9.074] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 9.074] (**) Option "AIGLX" "off"
[ 9.074] (==) Automatically adding devices
[ 9.074] (==) Automatically enabling devices
[ 9.127] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
[ 9.127] Entry deleted from font path.
[ 9.128] (Run 'mkfontdir' on "/usr/share/fonts/OTF/").
[ 9.128] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/Type1/".
[ 9.128] Entry deleted from font path.
[ 9.128] (Run 'mkfontdir' on "/usr/share/fonts/Type1/").
[ 9.128] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 9.128] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 9.128] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 9.128] (II) Loader magic: 0x82225a0
[ 9.128] (II) Module ABI versions:
[ 9.128] X.Org ANSI C Emulation: 0.4
[ 9.128] X.Org Video Driver: 12.1
[ 9.128] X.Org XInput driver : 16.0
[ 9.128] X.Org Server Extension : 6.0
[ 9.129] (--) PCI:*(0:1:0:0) 10de:0323:107d:1334 rev 161, Mem @ 0xe0000000/16777216, 0xd8000000/134217728, BIOS @ 0x????????/131072
[ 9.129] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 9.129] (II) LoadModule: "extmod"
[ 9.145] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 9.156] (II) Module extmod: vendor="X.Org Foundation"
[ 9.156] compiled for 1.12.4, module version = 1.0.0
[ 9.156] Module class: X.Org Server Extension
[ 9.156] ABI class: X.Org Server Extension, version 6.0
[ 9.156] (II) Loading extension MIT-SCREEN-SAVER
[ 9.156] (II) Loading extension XFree86-VidModeExtension
[ 9.156] (II) Loading extension XFree86-DGA
[ 9.156] (II) Loading extension DPMS
[ 9.156] (II) Loading extension XVideo
[ 9.156] (II) Loading extension XVideo-MotionCompensation
[ 9.156] (II) Loading extension X-Resource
[ 9.156] (II) LoadModule: "dbe"
[ 9.157] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 9.157] (II) Module dbe: vendor="X.Org Foundation"
[ 9.157] compiled for 1.12.4, module version = 1.0.0
[ 9.157] Module class: X.Org Server Extension
[ 9.157] ABI class: X.Org Server Extension, version 6.0
[ 9.157] (II) Loading extension DOUBLE-BUFFER
[ 9.157] (II) LoadModule: "glx"
[ 9.157] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 9.164] (II) Module glx: vendor="X.Org Foundation"
[ 9.164] compiled for 1.12.4, module version = 1.0.0
[ 9.164] ABI class: X.Org Server Extension, version 6.0
[ 9.164] (**) AIGLX disabled
[ 9.165] (II) Loading extension GLX
[ 9.165] (II) LoadModule: "record"
[ 9.165] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 9.166] (II) Module record: vendor="X.Org Foundation"
[ 9.166] compiled for 1.12.4, module version = 1.13.0
[ 9.166] Module class: X.Org Server Extension
[ 9.166] ABI class: X.Org Server Extension, version 6.0
[ 9.166] (II) Loading extension RECORD
[ 9.166] (II) LoadModule: "dri"
[ 9.166] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 9.172] (II) Module dri: vendor="X.Org Foundation"
[ 9.172] compiled for 1.12.4, module version = 1.0.0
[ 9.172] ABI class: X.Org Server Extension, version 6.0
[ 9.172] (II) Loading extension XFree86-DRI
[ 9.172] (II) LoadModule: "dri2"
[ 9.172] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 9.173] (II) Module dri2: vendor="X.Org Foundation"
[ 9.173] compiled for 1.12.4, module version = 1.2.0
[ 9.173] ABI class: X.Org Server Extension, version 6.0
[ 9.173] (II) Loading extension DRI2
[ 9.173] (==) Matched nouveau as autoconfigured driver 0
[ 9.173] (==) Matched nvidia as autoconfigured driver 1
[ 9.173] (==) Matched nv as autoconfigured driver 2
[ 9.173] (==) Matched vesa as autoconfigured driver 3
[ 9.173] (==) Matched fbdev as autoconfigured driver 4
[ 9.173] (==) Assigned the driver to the xf86ConfigLayout
[ 9.173] (II) LoadModule: "nouveau"
[ 9.180] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 9.191] (II) Module nouveau: vendor="X.Org Foundation"
[ 9.191] compiled for 1.12.2, module version = 1.0.1
[ 9.191] Module class: X.Org Video Driver
[ 9.191] ABI class: X.Org Video Driver, version 12.0
[ 9.191] (II) LoadModule: "nvidia"
[ 9.191] (WW) Warning, couldn't open module nvidia
[ 9.191] (II) UnloadModule: "nvidia"
[ 9.191] (II) Unloading nvidia
[ 9.192] (EE) Failed to load module "nvidia" (module does not exist, 0)
[ 9.192] (II) LoadModule: "nv"
[ 9.192] (WW) Warning, couldn't open module nv
[ 9.192] (II) UnloadModule: "nv"
[ 9.192] (II) Unloading nv
[ 9.192] (EE) Failed to load module "nv" (module does not exist, 0)
[ 9.192] (II) LoadModule: "vesa"
[ 9.192] (WW) Warning, couldn't open module vesa
[ 9.192] (II) UnloadModule: "vesa"
[ 9.192] (II) Unloading vesa
[ 9.192] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 9.192] (II) LoadModule: "fbdev"
[ 9.193] (WW) Warning, couldn't open module fbdev
[ 9.193] (II) UnloadModule: "fbdev"
[ 9.193] (II) Unloading fbdev
[ 9.193] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 9.193] (II) NOUVEAU driver
[ 9.193] (II) NOUVEAU driver for NVIDIA chipset families :
[ 9.193] RIVA TNT (NV04)
[ 9.193] RIVA TNT2 (NV05)
[ 9.193] GeForce 256 (NV10)
[ 9.193] GeForce 2 (NV11, NV15)
[ 9.193] GeForce 4MX (NV17, NV18)
[ 9.193] GeForce 3 (NV20)
[ 9.193] GeForce 4Ti (NV25, NV28)
[ 9.193] GeForce FX (NV3x)
[ 9.193] GeForce 6 (NV4x)
[ 9.193] GeForce 7 (G7x)
[ 9.193] GeForce 8 (G8x)
[ 9.193] GeForce GTX 200 (NVA0)
[ 9.193] GeForce GTX 400 (NVC0)
[ 9.193] (++) using VT number 7
[ 9.196] drmOpenDevice: node name is /dev/dri/card0
[ 9.196] drmOpenDevice: open result is 7, (OK)
[ 9.196] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 9.196] drmOpenDevice: node name is /dev/dri/card0
[ 9.196] drmOpenDevice: open result is 7, (OK)
[ 9.196] drmOpenByBusid: drmOpenMinor returns 7
[ 9.196] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 9.196] (II) [drm] nouveau interface version: 1.0.0
[ 9.196] (II) Loading sub module "dri"
[ 9.196] (II) LoadModule: "dri"
[ 9.197] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 9.197] (II) Module dri: vendor="X.Org Foundation"
[ 9.197] compiled for 1.12.4, module version = 1.0.0
[ 9.197] ABI class: X.Org Server Extension, version 6.0
[ 9.197] (II) NOUVEAU(0): Loaded DRI module
[ 9.197] drmOpenDevice: node name is /dev/dri/card0
[ 9.197] drmOpenDevice: open result is 8, (OK)
[ 9.197] drmOpenDevice: node name is /dev/dri/card0
[ 9.197] drmOpenDevice: open result is 8, (OK)
[ 9.197] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 9.197] drmOpenDevice: node name is /dev/dri/card0
[ 9.197] drmOpenDevice: open result is 8, (OK)
[ 9.197] drmOpenByBusid: drmOpenMinor returns 8
[ 9.197] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 9.197] (II) [drm] DRM interface version 1.4
[ 9.197] (II) [drm] DRM open master succeeded.
[ 9.197] (--) NOUVEAU(0): Chipset: "NVIDIA NV34"
[ 9.197] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 9.197] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 9.197] (==) NOUVEAU(0): RGB weight 888
[ 9.197] (==) NOUVEAU(0): Default visual is TrueColor
[ 9.197] (==) NOUVEAU(0): Using HW cursor
[ 9.197] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[ 9.197] (==) NOUVEAU(0): Page flipping enabled
[ 9.197] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[ 9.227] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[ 9.280] (II) NOUVEAU(0): Output TV-1 has no monitor section
[ 9.309] (II) NOUVEAU(0): EDID for output VGA-1
[ 9.309] (II) NOUVEAU(0): Manufacturer: SAM Model: 1b Serial#: 1195913527
[ 9.309] (II) NOUVEAU(0): Year: 2003 Week: 16
[ 9.309] (II) NOUVEAU(0): EDID Version: 1.3
[ 9.309] (II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 9.309] (II) NOUVEAU(0): Sync: Separate Composite SyncOnGreenSerration on. V.Sync Pulse req. if CompSync or SyncOnGreen
[ 9.309] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 34 vert.: 27
[ 9.309] (II) NOUVEAU(0): Gamma: 2.40
[ 9.309] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 9.309] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 9.309] (II) NOUVEAU(0): redX: 0.634 redY: 0.354 greenX: 0.304 greenY: 0.581
[ 9.309] (II) NOUVEAU(0): blueX: 0.143 blueY: 0.102 whiteX: 0.318 whiteY: 0.339
[ 9.309] (II) NOUVEAU(0): Supported established timings:
[ 9.309] (II) NOUVEAU(0): 720x400@70Hz
[ 9.309] (II) NOUVEAU(0): 640x480@60Hz
[ 9.309] (II) NOUVEAU(0): 640x480@67Hz
[ 9.309] (II) NOUVEAU(0): 640x480@72Hz
[ 9.310] (II) NOUVEAU(0): 640x480@75Hz
[ 9.310] (II) NOUVEAU(0): 800x600@56Hz
[ 9.310] (II) NOUVEAU(0): 800x600@60Hz
[ 9.310] (II) NOUVEAU(0): 800x600@72Hz
[ 9.310] (II) NOUVEAU(0): 800x600@75Hz
[ 9.310] (II) NOUVEAU(0): 832x624@75Hz
[ 9.310] (II) NOUVEAU(0): 1024x768@60Hz
[ 9.310] (II) NOUVEAU(0): 1024x768@70Hz
[ 9.310] (II) NOUVEAU(0): 1024x768@75Hz
[ 9.310] (II) NOUVEAU(0): 1280x1024@75Hz
[ 9.310] (II) NOUVEAU(0): 1152x864@75Hz
[ 9.310] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 9.310] (II) NOUVEAU(0): Supported standard timings:
[ 9.310] (II) NOUVEAU(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 9.310] (II) NOUVEAU(0): #1: hsize: 1024 vsize 768 refresh: 60 vid: 16481
[ 9.310] (II) NOUVEAU(0): #2: hsize: 800 vsize 600 refresh: 60 vid: 16453
[ 9.310] (II) NOUVEAU(0): #3: hsize: 640 vsize 480 refresh: 60 vid: 16433
[ 9.310] (II) NOUVEAU(0): Supported detailed timing:
[ 9.310] (II) NOUVEAU(0): clock: 108.0 MHz Image Size: 338 x 270 mm
[ 9.310] (II) NOUVEAU(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 9.310] (II) NOUVEAU(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 9.310] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 81 kHz, PixClock max 145 MHz
[ 9.310] (II) NOUVEAU(0): Monitor name: SyncMaster
[ 9.310] (II) NOUVEAU(0): Serial No: HJGW403719
[ 9.310] (II) NOUVEAU(0): EDID (in hex):
[ 9.310] (II) NOUVEAU(0): 00ffffffffffff004c2d1b0037314847
[ 9.310] (II) NOUVEAU(0): 100d01030f221b8cea6f8ba25a4d9424
[ 9.310] (II) NOUVEAU(0): 1a5156bfef8081806140454031400101
[ 9.310] (II) NOUVEAU(0): 010101010101302a009851002a403070
[ 9.310] (II) NOUVEAU(0): 1300520e1100001e000000fd00384c1e
[ 9.310] (II) NOUVEAU(0): 510e000a202020202020000000fc0053
[ 9.310] (II) NOUVEAU(0): 796e634d61737465720a2020000000ff
[ 9.310] (II) NOUVEAU(0): 00484a47573430333731390a20200057
[ 9.310] (II) NOUVEAU(0): EDID vendor "SAM", prod id 27
[ 9.310] (II) NOUVEAU(0): Using EDID range info for horizontal sync
[ 9.310] (II) NOUVEAU(0): Using EDID range info for vertical refresh
[ 9.310] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 9.310] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 9.310] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 9.310] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 9.310] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 9.310] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 9.310] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 9.310] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 9.311] (II) NOUVEAU(0): Printing probed modes for output VGA-1
[ 9.311] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 9.311] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "1280x800"x74.9 106.50 1280 1360 1488 1696 800 803 809 838 -hsync +vsync (62.8 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "1280x768"x74.9 102.25 1280 1360 1488 1696 768 771 778 805 +hsync -vsync (60.3 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "1024x576"x60.0 46.97 1024 1064 1168 1312 576 577 580 597 -hsync +vsync (35.8 kHz)
[ 9.311] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 9.311] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 9.363] (II) NOUVEAU(0): EDID for output TV-1
[ 9.363] (II) NOUVEAU(0): Output VGA-1 connected
[ 9.363] (II) NOUVEAU(0): Output TV-1 disconnected
[ 9.363] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 9.363] (II) NOUVEAU(0): Output VGA-1 using initial mode 1280x1024
[ 9.363] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 9.363] (--) NOUVEAU(0): Virtual size is 1280x1024 (pitch 0)
[ 9.363] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[ 9.363] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 9.363] (**) NOUVEAU(0): Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
[ 9.363] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 9.363] (**) NOUVEAU(0): Driver mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
[ 9.363] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 9.363] (**) NOUVEAU(0): Driver mode "1280x800": 106.5 MHz (scaled from 0.0 MHz), 62.8 kHz, 74.9 Hz
[ 9.363] (II) NOUVEAU(0): Modeline "1280x800"x74.9 106.50 1280 1360 1488 1696 800 803 809 838 -hsync +vsync (62.8 kHz e)
[ 9.363] (**) NOUVEAU(0): Driver mode "1280x800": 83.5 MHz (scaled from 0.0 MHz), 49.7 kHz, 59.8 Hz
[ 9.363] (II) NOUVEAU(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e)
[ 9.363] (**) NOUVEAU(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
[ 9.363] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 9.363] (**) NOUVEAU(0): Driver mode "1280x768": 102.2 MHz (scaled from 0.0 MHz), 60.3 kHz, 74.9 Hz
[ 9.363] (II) NOUVEAU(0): Modeline "1280x768"x74.9 102.25 1280 1360 1488 1696 768 771 778 805 +hsync -vsync (60.3 kHz e)
[ 9.363] (**) NOUVEAU(0): Driver mode "1280x768": 79.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 59.9 Hz
[ 9.363] (II) NOUVEAU(0): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e)
[ 9.363] (**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
[ 9.363] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 9.363] (**) NOUVEAU(0): Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
[ 9.363] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 9.363] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 9.364] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 9.364] (**) NOUVEAU(0): Mode "1024x576": 47.0 MHz (scaled from 0.0 MHz), 35.8 kHz, 60.0 Hz
[ 9.364] (II) NOUVEAU(0): Modeline "1024x576"x60.0 46.97 1024 1064 1168 1312 576 577 580 597 -hsync +vsync (35.8 kHz)
[ 9.364] (**) NOUVEAU(0): Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
[ 9.364] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 9.364] (**) NOUVEAU(0): Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
[ 9.364] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 9.364] (**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[ 9.364] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 9.364] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 9.364] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 9.364] (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 9.364] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 9.364] (**) NOUVEAU(0): Driver mode "848x480": 33.8 MHz (scaled from 0.0 MHz), 31.0 kHz, 60.0 Hz
[ 9.364] (II) NOUVEAU(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 9.364] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
[ 9.364] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 9.364] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[ 9.364] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 9.364] (**) NOUVEAU(0): Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
[ 9.364] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 9.364] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[ 9.364] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 9.364] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[ 9.364] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 9.364] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[ 9.364] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 9.364] (**) NOUVEAU(0): Display dimensions: (340, 270) mm
[ 9.364] (**) NOUVEAU(0): DPI set to (95, 96)
[ 9.364] (II) Loading sub module "fb"
[ 9.364] (II) LoadModule: "fb"
[ 9.364] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 9.375] (II) Module fb: vendor="X.Org Foundation"
[ 9.375] compiled for 1.12.4, module version = 1.0.0
[ 9.375] ABI class: X.Org ANSI C Emulation, version 0.4
[ 9.375] (II) Loading sub module "exa"
[ 9.375] (II) LoadModule: "exa"
[ 9.376] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 9.380] (II) Module exa: vendor="X.Org Foundation"
[ 9.380] compiled for 1.12.4, module version = 2.5.0
[ 9.380] ABI class: X.Org Video Driver, version 12.1
[ 9.380] (II) Loading sub module "shadowfb"
[ 9.380] (II) LoadModule: "shadowfb"
[ 9.380] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 9.382] (II) Module shadowfb: vendor="X.Org Foundation"
[ 9.382] compiled for 1.12.4, module version = 1.0.0
[ 9.382] ABI class: X.Org ANSI C Emulation, version 0.4
[ 9.382] (--) Depth 24 pixmap format is 32 bpp
[ 9.382] (II) NOUVEAU(0): Opened GPU channel 1
[ 9.384] (II) NOUVEAU(0): [DRI2] Setup complete
[ 9.384] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 9.384] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 9.399] (II) EXA(0): Driver allocated offscreen pixmaps
[ 9.399] (II) EXA(0): Driver registered support for the following operations:
[ 9.399] (II) Solid
[ 9.399] (II) Copy
[ 9.399] (II) Composite (RENDER acceleration)
[ 9.399] (II) UploadToScreen
[ 9.399] (II) DownloadFromScreen
[ 9.399] (==) NOUVEAU(0): Backing store disabled
[ 9.399] (==) NOUVEAU(0): Silken mouse enabled
[ 9.399] (II) NOUVEAU(0): [XvMC] Associated with NV30 texture adapter.
[ 9.399] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 9.399] (==) NOUVEAU(0): DPMS enabled
[ 9.399] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 9.399] (--) RandR disabled
[ 9.399] (II) Initializing built-in extension Generic Event Extension
[ 9.399] (II) Initializing built-in extension SHAPE
[ 9.399] (II) Initializing built-in extension MIT-SHM
[ 9.400] (II) Initializing built-in extension XInputExtension
[ 9.400] (II) Initializing built-in extension XTEST
[ 9.400] (II) Initializing built-in extension BIG-REQUESTS
[ 9.400] (II) Initializing built-in extension SYNC
[ 9.400] (II) Initializing built-in extension XKEYBOARD
[ 9.400] (II) Initializing built-in extension XC-MISC
[ 9.400] (II) Initializing built-in extension SECURITY
[ 9.400] (II) Initializing built-in extension XINERAMA
[ 9.400] (II) Initializing built-in extension XFIXES
[ 9.400] (II) Initializing built-in extension RENDER
[ 9.400] (II) Initializing built-in extension RANDR
[ 9.400] (II) Initializing built-in extension COMPOSITE
[ 9.400] (II) Initializing built-in extension DAMAGE
[ 9.800] (II) AIGLX: Loaded and initialized swrast
[ 9.800] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 9.807] (II) NOUVEAU(0): NVEnterVT is called.
[ 9.807] (II) NOUVEAU(0): Setting screen physical size to 338 x 270
[ 9.807] resize called 1280 1024
[ 10.066] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 10.066] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 10.066] (II) LoadModule: "evdev"
[ 10.066] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 10.075] (II) Module evdev: vendor="X.Org Foundation"
[ 10.075] compiled for 1.12.3.901, module version = 2.7.3
[ 10.075] Module class: X.Org XInput Driver
[ 10.075] ABI class: X.Org XInput driver, version 16.0
[ 10.075] (II) Using input driver 'evdev' for 'Power Button'
[ 10.076] (**) Power Button: always reports core events
[ 10.076] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 10.076] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 10.076] (--) evdev: Power Button: Found keys
[ 10.076] (II) evdev: Power Button: Configuring as keyboard
[ 10.076] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 10.076] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 10.076] (**) Option "xkb_rules" "evdev"
[ 10.076] (**) Option "xkb_model" "evdev"
[ 10.076] (**) Option "xkb_layout" "us"
[ 10.117] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 10.117] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 10.117] (II) Using input driver 'evdev' for 'Power Button'
[ 10.117] (**) Power Button: always reports core events
[ 10.117] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 10.118] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 10.118] (--) evdev: Power Button: Found keys
[ 10.118] (II) evdev: Power Button: Configuring as keyboard
[ 10.118] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[ 10.118] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 10.118] (**) Option "xkb_rules" "evdev"
[ 10.118] (**) Option "xkb_model" "evdev"
[ 10.118] (**) Option "xkb_layout" "us"
[ 10.118] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 10.118] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 10.118] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 10.119] (**) AT Translated Set 2 keyboard: always reports core events
[ 10.119] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 10.119] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 10.119] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 10.119] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 10.119] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 10.119] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 8)
[ 10.119] (**) Option "xkb_rules" "evdev"
[ 10.119] (**) Option "xkb_model" "evdev"
[ 10.119] (**) Option "xkb_layout" "us"
[ 10.120] (II) config/udev: Adding input device ImPS/2 Logitech Wheel Mouse (/dev/input/event4)
[ 10.120] (**) ImPS/2 Logitech Wheel Mouse: Applying InputClass "evdev pointer catchall"
[ 10.120] (II) Using input driver 'evdev' for 'ImPS/2 Logitech Wheel Mouse'
[ 10.120] (**) ImPS/2 Logitech Wheel Mouse: always reports core events
[ 10.120] (**) evdev: ImPS/2 Logitech Wheel Mouse: Device: "/dev/input/event4"
[ 10.120] (--) evdev: ImPS/2 Logitech Wheel Mouse: Vendor 0x2 Product 0x5
[ 10.120] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found 3 mouse buttons
[ 10.120] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found scroll wheel(s)
[ 10.120] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found relative axes
[ 10.120] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found x and y relative axes
[ 10.120] (II) evdev: ImPS/2 Logitech Wheel Mouse: Configuring as mouse
[ 10.120] (II) evdev: ImPS/2 Logitech Wheel Mouse: Adding scrollwheel support
[ 10.120] (**) evdev: ImPS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5
[ 10.120] (**) evdev: ImPS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 10.120] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input4/event4"
[ 10.120] (II) XINPUT: Adding extended input device "ImPS/2 Logitech Wheel Mouse" (type: MOUSE, id 9)
[ 10.120] (II) evdev: ImPS/2 Logitech Wheel Mouse: initialized for relative axes.
[ 10.120] (**) ImPS/2 Logitech Wheel Mouse: (accel) keeping acceleration scheme 1
[ 10.120] (**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration profile 0
[ 10.120] (**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration factor: 2.000
[ 10.120] (**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration threshold: 4
[ 10.121] (II) config/udev: Adding input device ImPS/2 Logitech Wheel Mouse (/dev/input/mouse0)
[ 10.121] (II) No input driver specified, ignoring this device.
[ 10.121] (II) This device may have been added with another device file.
[ 10.121] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[ 10.121] (II) No input driver specified, ignoring this device.
[ 10.121] (II) This device may have been added with another device file.
[ 10.174] (II) NOUVEAU(0): EDID vendor "SAM", prod id 27
[ 10.174] (II) NOUVEAU(0): Using hsync ranges from config file
[ 10.174] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 10.174] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 10.174] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 10.174] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 10.174] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 10.174] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 10.174] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 10.174] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 10.174] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 10.174] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 10.174] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 10.174] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 10.174] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 10.174] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 10.174] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 10.174] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 10.174] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 10.174] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 14.960] (II) NOUVEAU(0): EDID vendor "SAM", prod id 27
[ 14.960] (II) NOUVEAU(0): Using hsync ranges from config file
[ 14.960] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 14.960] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 14.960] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 14.961] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 14.961] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 14.961] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 14.961] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 14.961] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 14.961] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 14.961] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 14.961] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 14.961] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 14.961] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 14.961] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 14.961] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 14.961] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 14.961] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 14.961] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 84.256] (II) NOUVEAU(0): NVLeaveVT is called.
[ 111.559] (II) NOUVEAU(0): NVEnterVT is called.
[ 111.601] (II) NOUVEAU(0): EDID vendor "SAM", prod id 27
[ 111.601] (II) NOUVEAU(0): Using hsync ranges from config file
[ 111.601] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 111.601] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 111.601] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 111.601] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 111.601] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 111.601] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 111.601] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 111.601] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 111.601] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 111.602] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 111.602] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 111.602] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 111.602] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 111.602] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 111.602] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 111.602] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 111.602] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 111.602] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 119.891] (II) NOUVEAU(0): EDID vendor "SAM", prod id 27
[ 119.891] (II) NOUVEAU(0): Using hsync ranges from config file
[ 119.891] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 119.891] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 119.891] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 119.891] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 119.891] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 119.891] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 119.891] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 119.891] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 119.891] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 119.891] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 119.891] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 119.891] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 119.891] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 119.891] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 119.891] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 119.891] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 119.892] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 119.892] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 121.162] (II) NOUVEAU(0): EDID vendor "SAM", prod id 27
[ 121.162] (II) NOUVEAU(0): Using hsync ranges from config file
[ 121.162] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 121.162] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 121.162] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 121.162] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 121.162] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 121.162] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 121.162] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 121.162] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 121.162] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 121.162] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 121.162] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 121.162] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 121.162] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 121.162] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 121.162] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 121.162] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 121.163] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 121.163] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 122.743] (II) NOUVEAU(0): EDID vendor "SAM", prod id 27
[ 122.743] (II) NOUVEAU(0): Using hsync ranges from config file
[ 122.743] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 122.743] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 122.743] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 122.743] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 122.743] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 122.743] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 122.743] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 122.743] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 122.743] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 122.743] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 122.743] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 122.743] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 122.743] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 122.743] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 122.743] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 122.743] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 122.744] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 122.744] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 138.896] (II) NOUVEAU(0): NVLeaveVT is called.
[ 167.669] (II) NOUVEAU(0): NVEnterVT is called.
[ 167.720] (II) NOUVEAU(0): EDID vendor "SAM", prod id 27
[ 167.720] (II) NOUVEAU(0): Using hsync ranges from config file
[ 167.720] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 167.720] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 167.720] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 167.720] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 167.720] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 167.720] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 167.720] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 167.720] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 167.720] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 167.720] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 167.720] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 167.720] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 167.720] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 167.720] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 167.720] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 167.720] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 167.720] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 167.720] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 186.390] (II) NOUVEAU(0): NVLeaveVT is called.
- .xsession-errors in gnome session :
GNOME_KEYRING_CONTROL=/home/olivier/.cache/keyring-D3uSoF
GNOME_KEYRING_CONTROL=/home/olivier/.cache/keyring-D3uSoF
GPG_AGENT_INFO=/home/olivier/.cache/keyring-D3uSoF/gpg:0:1
GNOME_KEYRING_CONTROL=/home/olivier/.cache/keyring-D3uSoF
GPG_AGENT_INFO=/home/olivier/.cache/keyring-D3uSoF/gpg:0:1
SSH_AUTH_SOCK=/home/olivier/.cache/keyring-D3uSoF/ssh
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 30
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 30
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 55
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 56
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 59
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 58
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 30
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 30
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 30
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 55
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 56
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 59
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 58
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 30
Failed to play sound: File or data not found
** Message: applet now removed from the notification area
** Message: applet now embedded in the notification area
Avertissement du gestionnaire de fenêtres : CurrentTime used to choose focus window; focus window may not be correct.
Avertissement du gestionnaire de fenêtres : Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 30
(gnome-shell:700): folks-WARNING **: Failed to find primary PersonaStore with type ID 'eds' and ID 'system'.
Individuals will not be linked properly and creating new links between Personas will not work.
The configured primary PersonaStore's backend may not be installed. If you are unsure, check with your distribution.
(gnome-shell:700): GLib-GIO-WARNING **: Dropping signal ActiveSessionChanged of type (s) since the type from the expected interface is (o)
(gnome-settings-daemon:657): color-plugin-WARNING **: Done switch to new account, reload devices
(gnome-shell:700): GLib-GIO-WARNING **: Dropping signal ActiveSessionChanged of type (s) since the type from the expected interface is (o)
(gnome-shell:700): GLib-GIO-WARNING **: Dropping signal ActiveSessionChanged of type (s) since the type from the expected interface is (o)
Last edited by Jejel59 (2012-09-06 11:34:53)

I'm no expert on reading the xsession errors, but I had all sorts of problems running gnome3 with my machine of the same vintage. Cinamon is based on gnome3. I switched to Mate which is a re-packaging of the old gnome2 along with Compiz for the window manager and all works well.
I strongly suspect that they are using the newer OpenGL 4 API. The Nvidia FX5200 is stuck at OpenGL 2.1.

Is there a way to place the Dock on the bottom of a secondary monitor?

I use my iMac as primary monitor and a secondary display on the right. Is there a way to place the dock on the bottom of the secondary monitor(in a way that the display arrangment actually match the monitor position on my desk)?
I want something like this, with the red marker as the dock(the display arrangment match how the monitors are in my desk):
The solution I'm working with is:
I could turn the monitor attached to the iMac as primary(and set the dock there), but I got some problems with programs opening in wrong positions all the time and some issues with full screen programs as well(also I think the iMac didn't handle well setting the primary display in another monitor).
If there isn't a way to do it in Mountain Lion, will Maverick do any better?

Don't know of a way to get the Dock on the top.
But, to keep it out of the way but available, in the Dock prefs pane in System Preferences you can set it to "automatically hide and show". Choosing that setting means the Dock will normally be hidden; to gain access to it, all you need do is brush the bottom of the screen (or the side you have Doc set to) with the cursor, and it will appear, staying visible only until you move the cursor away.
You can also use the keyboard combo Command-Option-D to invoke/revoke Dock Hiding, which in effect means you can use that keyboard command to toggle the Dock's visibility.

Detect displays seems to have quit working? The secondary monitor is bleeding into the MacBook Pro monitor. How can I fix this?

I am using a MacBook Pro 2009, Snow Leopard (OSX 10.6.8). All of a sudden last night after a long day of work, my monitor resolution changed without warning and the secondary monitor display started bleeding into my laptop monitor. When I go to detect displays, it doesn't fix the problem. It looks like I need to switch to a larger display setting and the largest setting has disappeared.(The display seems to default to this setting where my screen bleeds into the laptop monitor.) When this started happening last night, I immediately shutdown and restarted to see if this would fix the problem. So far, it's still not looking too good.
I also tried shutting the laptop and using the external monitor only. When I do this, the monitor freaks out and keeps flashing on long enough for me to input a password. Then it flashes off, the computer and dipslay goes to sleep and I have to re enter my password to exit sleep mode and the process starts all over again.
Here are screen shots of the two monitors side by side:
http://danisco.files.wordpress.com/2013/07/monitors.png
(Notice the weird overlap - it's not keeping me from working, but it's super annoying!)
Any ideas on how I can try and fix this? OR do I need to get help from Apple directly. Thank you in advance for any suggestions on this!

Okay - this issue seems to have resolved on it's own. Yea!
I did find a thread that suggested resetting the PRAM/NVRAM so I did this, restored the external monitor to factory settings and went into Disk Utility and repaired disk permissions and verified disk permissions.
Here is a link to reset the PRAM/NVRAM: http://support.apple.com/kb/HT1379
These things may have helped resolve this issue. I can't tell what worked because it was hours after I did all these things that my monitor and computer decided they liked each other again. If you have a similar issue, maybe these steps will help you resolve your problem too.
Hope this is helpful!

All my Adobe Reader (PDF) files are opening only in the secondary monitor by default, as I am workin

I am using Adobe 8 Professional and working on Windows XP. I have been facing an issue lately with opening files in a dual-monitor environment. All my Adobe Reader (PDF) files are opening only in the secondary monitor by default. There are times when I work only in one monitor and when I open a PDF file and want to have a look at it, I have to connect another monitor to view that file, since this file is open in the secondary monitor. It is very disappointing with such instances happening with Adobe (a leading organization). Can you please help so that the Adobe Reader files open in the primary monitor by default?

On a Windows system disable the preview of Windows Explorer.

Windows gets rearranged in Windows 8.1 and secondary monitor when computer goes to sleep

I have a MacBook Air 2013 with a secondary monitor installed through a mini-display port-HDMI cable. I also have bootcamp installed in Windows 8.1 64 bits with all the latest drivers installed. The problem that I have is that when the computer wakes after it goes to sleep, all the windows in the non-primary monitor moves to the primary monitor and I have to re-arranged them all over every time.
What I tried so far:
1. Installed the latests drivers from Microsoft and Intel HD Graphics 5000.
2. Look for the DMMEnableDDCPolling in the registry. (not found only available for ATI cards)
3. Change the mini-displayport-HDMI cable for a new one that doesn't transmit the "power" so that computer do not detect that the monitor was shutdown.
4. Change the resolution on boths monitors to native resolution
5. Change the primary display from external monitor to laptop monitor
6. Changer HKLM\Software\Microsoft\TMM\UseIViewHelper from 1 to 0
7. Try to get an answer from Apple, Intel and microsoft support.
Similar threads where I found this info:
Link 1
Link 2
Link 3
PLEASE HELP! I Don't know what else to do!
This do not happend on MacOS, is happends only in Windows.
Thanks, Andres Rormoser.

The only solution that I found so far was to install Actual Window Manager, separate the secondary monitor in tiles, assign each window to each tile, add a shortcut to start/stop ActualWindowManager and every time the computer wakes up with the windows re-arranged I press the shoutcut and everything goes back to my predifined layout.
http://www.actualtools.com/?ref=aim814_prg

Windows 7 In Place Upgrade Pre-Windows boot and Graphics issue Alienware M17x

So I'm having multiple issues here. The first issue surfaced immediately after I removed and reinserted my graphics card. For reference The computer in question is an Alienware M17XR3 with an AMD 6870m. Anyhow, The issue I had then was
that my built in display showed a black screen (would see a quick flicker of what was supposed to be on it when changing display settings but then a black screen) after Windows botted up. I could use an external monitor with no problem, and safe mode
or Windows without graphics drivers allowed everything to run normally. The on screen display also works normally on boot screens or boot disks such as the windows install disk and Hyrens boot CD. I am assuming my graphics card is shot. Either
that or my motherboard. Input on this is greatly appreciated. I do intend to upgrade it myself to a 6970m, but I won't have the money until another 1 or 2 paychecks roll around, and I woulld like to be able to use the on-screen display sooner than
that.
Anyhow, to ensure that it is a hardware issue, rather than a software issue, I cleaned old drivers then installed drivers I knew were fully functional. I did this several times with several driver versions. Nothing yielded any results. I
do not wish to do aclean install unless absolutely necessary or at least not until after the weekend, when I will have time to reinstall my 300+programs, games, themes, mods, etc. I am not opposed to doing this but I need the computer tonight and
do not have time to do all that before then. I'll be using it with an external display tonight, so the graphics issue can wait, however, to test with a clean install, I was using Aomei Partition Assistant to break off some free space as a second partition
on which I could install a second Windows 7 installation for testing purposes. I have done this multiple times before. Unfortunatly, on 4.5 hours of sleep and having been up for about 18 hours straight I wasn't thinking and forgot to plug my laptop
in. It lost power during the process and the Windows installation is now totally glitched. I've tried several fixes all to no avail and would prefer to avoid a clean install until after the weekend.
In Windows XP, I could boot from the install disk and perform a repair install, similar to the Windows 7 upgrade/in place upgrade. I would like to do this, but seeing as I cannot access the Windows environment, I'm in a bit of a jam. I could
run that program again from mini Windows XP (Hyren's Boot CD) I believe and create the second partition and dual boot. My question is, can I drop the new Windows folder over the old one or do something similar to avoid losing my programs and files? Thanks

Hi,
Based on my knowledge, we cannot just copy the windows folder to make programs work in the new operating system.
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

Secondary monitor graphical issues

Similar Messages

Maybe you are looking for