Secondary Server MP is not working after primary server database up gradation.

Hi All,
Required your Help for MP Issue.
we had migrated the SQL data base in one of our Primary server, where there is 10 secondary servers are available.
7 secondary servers are working fine and remain 3 servers MP has down after the migration.
PFB the MPcontroal log.
NetBIOS_AddName(): LocalName: MP_XXX LanaNumber: 2
SMS_MP_CONTROL_MANAGER 7/8/2014 1:23:49 PM
4480 (0x1180)
RegisterWithWINS: NetBIOS_AddName(LANA=2) returned 0x0
SMS_MP_CONTROL_MANAGER 7/8/2014 1:23:52 PM
4480 (0x1180)
NetBIOS_AddName(): LocalName: MP_XXX LanaNumber: 7
SMS_MP_CONTROL_MANAGER 7/8/2014 1:23:52 PM
4480 (0x1180)
RegisterWithWINS: NetBIOS_AddName(LANA=7) returned 0x0
SMS_MP_CONTROL_MANAGER 7/8/2014 1:24:04 PM
4480 (0x1180)
MPStart(): RegisterWithWINS() returned 0x0 SMS_MP_CONTROL_MANAGER
7/8/2014 1:24:04 PM 4480 (0x1180)
MPStart(): PublishInDNS() returned 0x0 SMS_MP_CONTROL_MANAGER
7/8/2014 1:24:04 PM 4480 (0x1180)
Successfully Registered for IP Address Change notifications.
SMS_MP_CONTROL_MANAGER 7/8/2014 1:24:04 PM
4480 (0x1180)
MPStart(): RegisterForIPAddressChangeNotification() returned 0x0
SMS_MP_CONTROL_MANAGER 7/8/2014 1:24:04 PM
4480 (0x1180)
Attempting to register the SQL connection type for the configured SQL database.
SMS_MP_CONTROL_MANAGER 7/8/2014 1:24:04 PM
4480 (0x1180)
Registered connection type for SQL Server 'XXX.com' and database 'SMS_XXX'.
SMS_MP_CONTROL_MANAGER 7/8/2014 1:24:04 PM
4480 (0x1180)
MPStart(): RegisterSqlDatabaseConnectionType() returned 0x0
SMS_MP_CONTROL_MANAGER 7/8/2014 1:24:04 PM
4480 (0x1180)
Checking the current CLR Enabled configuration setting for the configured SQL Server hosting the database.
SMS_MP_CONTROL_MANAGER 7/8/2014 1:24:04 PM
4480 (0x1180)
Getting the CLR Enabled value from the configured SQL database.
SMS_MP_CONTROL_MANAGER 7/8/2014 1:24:04 PM
4480 (0x1180)
Attempting to connect to the configured SQL database.
SMS_MP_CONTROL_MANAGER 7/8/2014 1:24:04 PM
4480 (0x1180)
*** [08001][18][Microsoft][ODBC SQL Server Driver][DBNETLIB]SSL Security error
SMS_MP_CONTROL_MANAGER 7/8/2014 1:29:06 PM
4480 (0x1180)
*** [01000][772][Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (SECDoClientHandshake()).
SMS_MP_CONTROL_MANAGER 7/8/2014 1:29:06 PM
4480 (0x1180)
*** Failed to connect to the SQL Server. SMS_MP_CONTROL_MANAGER
7/8/2014 1:29:06 PM 4480 (0x1180)
Failed to get connection to the configured SQL database.
SMS_MP_CONTROL_MANAGER 7/8/2014 1:29:06 PM
4480 (0x1180)
Failed to connect to the configured SQL database.
SMS_MP_CONTROL_MANAGER 7/8/2014 1:29:06 PM
4480 (0x1180)
Failed to get the current CLR Enabled configuration setting for the configured SQL Server hosting the database.
SMS_MP_CONTROL_MANAGER 7/8/2014 1:29:06 PM
4480 (0x1180)
MPStart(): CheckSqlDatabaseClrEnabled() returned 0x800720d9
SMS_MP_CONTROL_MANAGER 7/8/2014 1:29:06 PM
4480 (0x1180)
Waiting up to 300 seconds for the SMS Agent Host service to be running.
SMS_MP_CONTROL_MANAGER 7/8/2014 1:29:06 PM
4480 (0x1180)
Stopped waiting for the SMS Agent Host service to be running; error = 0x0.
SMS_MP_CONTROL_MANAGER 7/8/2014 1:29:06 PM
4480 (0x1180)
MPStart(): WaitOnSmsAgentHostRunning() returned 0x0
SMS_MP_CONTROL_MANAGER 7/8/2014 1:29:06 PM
4480 (0x1180)
MPStart(): CreateThread() succeeded with id 0xc94.
SMS_MP_CONTROL_MANAGER 7/8/2014 1:29:06 PM
4480 (0x1180)
SMS_MP_CONTROL_MANAGER successfully STARTED.
SMS_MP_CONTROL_MANAGER 7/8/2014 1:29:06 PM
4480 (0x1180)
Configuration and Availability Monitor thread started.
SMS_MP_CONTROL_MANAGER 7/8/2014 1:29:06 PM
3220 (0x0C94)
Initialized 'SMS Server Availability' performance instance => SMS Management Point.
SMS_MP_CONTROL_MANAGER 7/8/2014 1:29:06 PM
3220 (0x0C94)
Call to HttpSendRequestSync failed for port 80 with status code 500, text: Internal Server Error
Thanks in Advance.
Regards,
Raj.

Yes, I know this is an old post, but I’m trying to clean them up.
Based on your log file the problem appears to be a permission issue. “Failed to connect to the configured SQL database.”
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Similar Messages

TS2621 why my outgoing mail server not working after ios 6 upgraded

why my outgoing mail server not working after ios 6 upgraded

Ask your carrier to send you the settings over wifi and then install them that way.
I'm on giffgaff and I used the giffgaff app from the store to sort this out.
Overall though I must say Apple has let itself down on this as why isn't something written in the ios script that keeps the original settings??
Very Poor indeed and I held off using Apple products for years for this very reason!!

Sql is not working after changing from MsAccess into sql server

Following Sql is not working after changing from MsAccess into sql server.
sum(trn.sales) as sales,
sum(trn.cost) as cost,
sales - cost as profit // Here is not working . can we not use sales a column. Please advise
from trn
Kind Regards
pol
polachan

It will not work if use two different column from the table or column from two different table
Example
sum(trn.sales * trn.rate) as salesAmount,
sum(trn.cost) as cost,
sum(trn.salesAmount)-sum(trn.cost) as profit ----- Here is not working . can we not use sales a column. Please advise
from trn
Regards
polachan

My outgoing mail is not working after the upgrade OS to mavericks. my mail client version is 7.1 . please help me resolve this issue

My outgoing mail is not working after the upgrade OS to the mavericks. my mail client version is 7.1 . please help me out resolve this issue

Please let me know , How we can reinstall apple mail ? .
1 . We updated OS to mavericks few machine in last december and still does't works SMTP (Out going mail) on those MAC.
2. After that most recently we updated OS to mavericks few machine those are working will with SMTP server .
a)Not showing any SMTP connection in TCP trace ,
b) Connection docter every time Says "Connecting to the server "
3, Then we have installed thunderberd (another mail) client on maverick os, which OS related to apple mail client not woking . It seems other mail client is working well with SMTP server .
Please help me .
Thanks,
Ranesh..

Content query web part is not working after chaning the DNS entry

Hi all,
We have a content query web part in the sharepoint site but it is not working after changing the DNS Entry for the web site ipaddress from one server to other . But it is working fine on the server, if we try to access the site from other system content
quey server its not working fine and its giving error message as bellow.
Unable to display this Web Part. To troubleshoot the problem, open this Web page in a Microsoft SharePoint Foundation-compatible HTML editor such as Microsoft SharePoint Designer. If the problem persists, contact your Web server administrator.
Can anyone help me to fix this issue please.

I have custom XSLT . But it is working fine before changing the dns entry as soon as we change the DNS entry the content quey web part is not working. I tried to delete the content query web part and add it once again to the page, As soon as content query
web part is added to the page the fallowing error message is displayed.
Unable to display this Web Part. To troubleshoot the problem, open this Web page in a Microsoft SharePoint Foundation-compatible HTML editor such as Microsoft SharePoint Designer. If the problem persists, contact your Web server administrator.
Can anyone help me to fix this issue please.

"F11 System Recovery" during boot does not work after Cloning hard drive.

Problem: “F11 System Recovery” during boot does not work after Cloning hard drive.
HP Envy m6-1125dx UEFI Notebook Computer with GPT hard drive.
Original Seagate Hard Disk GPT 700GB with Window 8.0_64 upgraded to Windows 8.1_64
Startup Menu (F11 System Menu works properly) only on original hard drive.
Following obtained from Disk Management & diskpart in Command Prompt.
GPT Disk <700GB>
Partition 1 WINRE NTFS Primary 235MB/400MB [Recovery]
Partition 2 EFI System FAT32 (LBA) Primary 108MB/260MB [System]
Partition 3 (NONE) Unformatted Primary 128MB/128MB [Reserve]
Partition 4 Main NTFS Primary 90GB/195GB [Primary “C”]
Partition 5 (NONE) NTFS Primary 372MB/450MB [Recovery]
Partition 6 Data NTFS Primary 7GB/475GB [Primary “E”]
Partition 7 NTFS Primary 26MB/350MB [Recovery]
Partition 8 Recovery NTFS Primary 24GB/26GB [Recovery “D”]
I have Cloned the original hard drive to a new HGST 1TB Hard Drive using four different methods (sector by sector):
Acronis True Image 2015
Acronis Backup for PC
AOMEI Backupper Professional
Macrium Reflect
Each time the cloning process completes successfully and has the same original partition arrangement. The computer works properly except when trying to use the “F11 System Menu” key during boot. It gives the following error message:
“Recovery
Your PC needs to be repaired
A required device isn’t connected or can’t be accessed.
Error code: 0xc0000225
You need to use the recovery tools on your installation media. If you don’t have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer. “
Any suggestions why the F11 System Recovery does not work during boot and how to fix the problem would be appreciated. I have does various disk checking and file checking on both the original and new hard drive with no errors.
Thank you in advanced.

Hi,
How did you clone the HDD ? One-for-one or different method ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Security and privacy system preferences not working after Lion install. What to do?

Security and privacy system preference not working after Lion install. Not sure if it happen with Lion installer or after updating. What to do?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” (without the quotes) and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

Internet not working after installing "StarTech Thunderbolt Docking Station" driver

My Internet is not working after installing "StarTech Thunderbolt Docking Station" driver although "Ethernet" and "wireless" say they're connected, still there is no internet.
I have bought a "StarTech Thunderbolt Docking Station" as I need to use 2 thunderbolt based pieces of equipment on my "MacBook Pro"; which are a 2nd monitor as well as a Thunderbolt driven Audio Interface.
When I first plugged all my equipment to the "StarTech Thunderbolt Docking Station" everything was working fine, all pieces of equipment worked as well as Ethernet from both the computer and the docking station were working perfectly.
However, when I inserted the "StarTech Thunderbolt Docking Station driver CD" and installed the drivers, the internet on my computer has stopped working. Although the Ethernet says it is "connected" (same goes for "Thunderbolt Ethernet" when cable is connected to it) still the internet does not work. Even my wireless internet is not working anymore. Furthermore, also after installing the Docking Station drivers, my iTunes is crashing whenever started.
Please help, this is really urgent.
I've been looking for answers all around but can't seem to find any.
I'm using OSX Mavericks 10.9.2
I've tried fixing stuff with Network preferences, like changing IP address, renewing DHCP leace.
I also tried typing IP address, Subnet Mask, Router and DNS Sever manually... Nothing seems to be working.
Note: I know someone could suggest to "uninstall" the Thunderbolt Station driver, however, I can't find an "uninstallation file", even the CD that came with the docking station does not have it.

I had exactly the same problem today, and I was lucky enough to solve it.
Here's what helped me:
First, I found a hint to Suspicious Package in this thread.
With Suspicious Package installed, I was able to identify the script in StarTech's installer pkg. It' called "postflight".
Amongst other things, postflight runs this command:
sudo mv usr/share/sandbox/mDNSResponder.sb usr/share/sandbox/_mDNSResponder.sb
A quick check in Apple's knowledge base revealed, that the mDNSResponder is essential to use DNS (i.e. to resolve server names like www.apple.com) and bonjour.
I moved th mDNSResponder back to where it belongs:
sudo mv usr/share/sandbox/_mDNSResponder.sb usr/share/sandbox/mDNSResponder.sb
After a reboot, everything worked fine again.
I have no idea, why StarTeck disables an essential tool. Let's assume it's an error ...
But after this experience, I didn't want the StarTech ethernet driver on my machine (I had installed it just for curiosity, anyway - yes, I know, I shouldn't have ...), so I removed the kext the installer had copied to my system:
sudo mv /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleIntel8 2580.kext /Users/myusername
(You see I didn't delete the kext directly, I just moved it away and tried another reboot. Now everything works fine, so I'm going to delete the kext entirely and paint a big red cross on StarTech's installer disk.
Hope this helps.

Xcode 3.2.3 is not working after installing on Mac 10.6.3?As when I start Xcode it is giving error"An unknown installation error occurred"

Xcode 3.2.3 is not working after installing on Mac 10.6.3?As when I start Xcode it is giving error"An unknown installation error occurred"
provide solution.

Well I didn't enter a hostname from my ISP, but I did need to enter as a Host Domain the sub-domain (CNAME) that we use for our server. Don't know all the proper terminology, but I hope that's clear enough to someone to help. As soon as I did that, it worked again.
Thanks for the tip,
W

RDP does not work after disabling TLS 1.0

RDP does not work after disabling TLS 1.0
Had to re-enable it .... what can i do to make it work with TLS 1.2 ??

Hi,
Disabling TLS 1.0 will break RDP under default settings. Did the security scan say specifically to disable TLS 1.0? Normally you should be able to disable use of certain ciphers or prioritize ciphers. You may want to try IISCrypto, on
it you click the PCI button, then Apply button, then restart your server.
Additionally there are still a substantial number of web browsers in use that do not support TLS 1.1/1.2.
If you would like to continue with TLS 1.0 disabled you may change the RDP Security Layer. To do this please open Terminal Services Configuration (tsconfig.msc), double-click RDP-Tcp, change Security Layer to RDP Security Layer.
IMPORTANT: You are vulnerable to MITM attack when using RDP Security Layer because there is no Server Authentication. If you are running RDP over a VPN connection and there is no risk for interception then this may be okay. I recommend
you re-enable TLS 1.0 and have a ssl certificate from a public authority set on your RDP-Tcp listener.
Quoted from this thread answered
by TP, for more information you can go through that thread.
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Satellite A110-228 LAN does not work after hibernate

Well, subject says it all, really. The LAN (wired) network does not work after hibernate.
It seems it cannot find the DHCP server, so after a while it gets a 169.* address.
After a reboot, the network functions as usual (gets a IP address from the DHCP server)
Tried the usual things, disconnecting the cable, disabling the LAN device, battery or AC adapter, the behavior is reproducible.
The wireless network will be restored after a hibernate.
It needs a little help though (right click on the icon and "recover" or whatever it is called in English)
Any suggestions?
Wilm Boerhout

Hi guys
In the Toshiba HW setup which is placed in the control panel the options Wake-up on LAN and Built-in LAN should be enabled.
I think the options are disabled by default.
Furthermore the default setting for Wake on Settings is OS controlled. To use the Wake-up on LAN function under power off mode, in the device driver for the network card under the menu point Wake On Settings the Value Wake on Magic & Directed must be set.
Please check this how to enable WOL (first time use):
1. Go to [Start] -> [Control Panel] -> [Toshiba HWSetup] -> [LAN] tab
2. Enable Wake-up on LAN
3. Click [Apply]. System will request to reboot.
4. After the reboot go to [Start] -> [Control Panel] -> select [System]
5. On system properties dialog box select [Hardware] tab -> click [Device manager]
6. On Device manager dialog box select [Networking adapters] -> double click [Intel(R) PRO/100 VE Network Connection]
7. Go to [Advanced] tab -> select [Wake On Settings] property -> Select [Wake on Magic & Directed]
8. Press [OK] to close the dialog box.

Internet not working after turning Airport on

Hello,
All of a sudden, I can not connect to the internet when I turn the Airport on. The signal looks strong. But when I open my browser, it gives an error page. On a cafe where there is a free wireless internet that I go to often and had no problems connecting, gave me this message recently.
IP Configuration
192.168.1.46 in use by 00:18:39:88:81:fc, DHCP Server 192.168.1.1
Is there anything that I need to update in my Airport settings? If so, where? I have been trying to look for that and don't seem to have any luck.
Thanks for any help.
Rich
G4 Mac OS X (10.4.8)

See your other thread " Internet not working after turning Airport on".

Tecra M7: Tablet does not work after lid closing

Has anyone had problems with the tablet not working after closing the lid on a Tecra M7? Bios is 3.20
Doesn't seem to happen on hibernate or sleep.
I have the lid set to do nothing on close.

Hi
What do you mean with tablet not working after closing the lid?
Does the notebook freezes or what?? What happens exactly???
The close the lid settings can be set to hibernation mode or standby mode or no action.
These settings can be set in the power saver setup actions.
If you have some problems with some installed Toshiba applications I would recommend reinstalling the TOSHIBA Common Modules and the program which doesnt run correctly!
Best regards

My new iPad sound is not working after updating to ios 6.1

My new iPad sound not working after updating to ios 6.1. Headphones are working fine. I tried all the troubleshoot. can anyone know the answer, plz share with me

Hi,
I have exactly the same issue as everyone above. I only get sound through the slider on the ringtone in settings and through my headphones. I do not get any sound anywhere else at all.
I Have tried:
- Updating to iOS 6.1.3
-re starting the device
-checking that the device is not muted. My slider switch is set to mute rather than lock and is unmuted.
-going into general settings and reset all settings
-the device reset several times (waiting until I saw the all important apple logo)
-removing the last few apps I installed.
Nothing at all has worked, please help!
New iPadiPad

IPhone 5s not working after voice over turned on

iPhone 5s not working after voice over turned on

Hello ss1997,
Thanks for using Apple Support Communities.
To troubleshoot this issue where your iPhone will not boot past the Apple logo please follow the steps in the article below.
iOS: Not responding or does not turn on
Take care,
Alex H.

Secondary Server MP is not working after primary server database up gradation.

Similar Messages

Maybe you are looking for