Secondary site installation error: CONFIGMGRSEC instance is used by another secondary site,installing secondary site by choosing option automatically install Express SQL not selecting Lower option

Getting Error as :
INFO: Attempting to load resource DLL...   Configuration Manager Setup   23/Mar/15
3:11:26 PM   5020 (0x139C)
ERROR: Connection strings not initialized   Configuration Manager Setup   23/Mar/15
3:11:26 PM   8752 (0x2230)
CSql Error: Cannot find data for connection type: , cannot get a connection.   Configuration
Manager Setup   23/Mar/15 3:11:26 PM   8752 (0x2230)
ERROR: Failed to connect to SQL Server 'master' db.   Configuration Manager Setup
23/Mar/15 3:11:26 PM   8752 (0x2230)
INFO: Prerequisite rules for secondary site fresh installation are being run.   Configuration
Manager Setup   23/Mar/15 3:11:26 PM   8752 (0x2230)
INFO: File C:\Windows\smstsvc_test_1.exe does not exist. No zapping needed.   Configuration
Manager Setup   23/Mar/15 3:11:26 PM   8752 (0x2230)
INFO: test loop count:0.   Configuration Manager Setup   23/Mar/15 3:11:33
PM   8752 (0x2230)
INFO: smstsvc_test_1 Return result <0>   Configuration Manager Setup   23/Mar/15
3:11:33 PM   8752 (0x2230)
CWmiRegistry::WmiOpen: Failed to read key SOFTWARE\Microsoft\Microsoft SQL Server\Instance Names\SQL on
Configuration Manager Setup   23/Mar/15 3:11:36 PM   8752 (0x2230)
CWmiRegistry::WmiOpen: Failed to read key SOFTWARE\Microsoft\Microsoft SQL Server\Instance Names\SQL on
Configuration Manager Setup   23/Mar/15 3:11:36 PM   8752 (0x2230)
CWmiRegistry::GetValues: Failed to get values from SOFTWARE\Microsoft\Microsoft SQL Server\Instance Names\SQL
Configuration Manager Setup   23/Mar/15 3:11:36 PM   8752 (0x2230)
CWmiRegistry::GetValues: Failed to connect to registry on machine Error code: 2   Configuration
Manager Setup   23/Mar/15 3:11:36 PM   8752 (0x2230)
AND IN SHOW INSTALL STATUS I am getting Following Error:
1) ERROR:
1) Error:
[Failed]:A SQL Server instance is already installed on the secondary site server using the instance name CONFIGMGRSEC, or the specified TCP port is being used by another SQL Server instance, or OS version is not Windows Server 2008 sp2, Windows Server 2008
R2 sp1 or higher. Setup is unable to install SQL Server Express on the secondary site.
Note: I can find file in the C: programs file of Microsoft SQL which cannot be delete as it shows it is being used by some Window internal Database
2)Warning
permissions to the System Management container in its Active Directory domain. You can ignore this warning if you have manually verified these permissions. For more information about your options to configure required permissions, see http://go.microsoft.com/fwlink/p/?LinkId=233190.

"Note: I can find file in the C: programs file of Microsoft SQL which cannot be delete as it shows it is being used by some Window internal Database"
You answered your own question here didn't you. Why not remove the Windows Internal Database role from the server and try again?
Jason | http://blog.configmgrftw.com | @jasonsandys

Similar Messages

Need a shortcut to "Allow pages to choose their own colors, instead of my selections above option preference" I know where it is and how to use it but I have to go through 7 mouse clicks to change it, then a few minutes later change it back. I also k

Need a shortcut to "Allow pages to choose their own colors, instead of my selections above option preference" I know where it is and how to use it but I have to go through 7 mouse clicks to change it, then a few minutes later change it back. I also know the sequnce is alt t, alt o, alt c, alt a, then ok, ok. Got to be a way to make a one key short cut for this. I use a black background to reduce eye strain, but about 10% of the webpage I go to can't be send with black so I have to go into tools and hit 6 or 7 things to chnage it then after through with webpage have to do it all over at Not allow webpages to have own color. Very very cumbersome.
== This happened ==
A few times a week
== made that way

https://addons.mozilla.org/en-US/firefox/addon/toggledocumentcolors-198916/
The above addon will solve your problem.
Shortcut to toggle user color/page color :- Ctr+Shift+C

Error message: The preset used by one or more sequences in this project requires third-party components that could not be located. These sequences will be modified to use a custom sequence setting instead. To continue editing using the original preset, qu

Hello all,
I can't open a PP project without this error message appearing:
"The preset used by one or more sequences in this project requires third-party components that could not be located. These sequences will be modified to use a custom sequence setting instead. To continue editing using the original preset, quit the application without saving the project, reinstall any third-party components that are required and reopen the project".
What I had been doing before this occurred was editing a PP project using ProRes sequences and multi-camera editing. Multi-camera was not working very well and after a few attempts to fix that I gave up and finished the job cutting 3 layers of video instead. AME refused to render the three finished sequences of over 1hr duration so rendered final videos from the PP sequences.
I tried deleting plists for AME, PP and QT, repairing disc permissions and rebooting but there was no improvement.
Client is satisfied for now but will want to come back to this job at a later date so decided to uninstall and re-install AME and PP in the hope both would be ready to work properly when needed again. AME works fine in conjunction with a different PP project but now I can't open the PP project in question without the above error message appearing.
Having searched the net it would seem that the problem may be caused by ProRes but I haven't been able to find a definitive solution for the problem. Does anyone know either:
1. How to fix this?
2. If I chose the "modified using a custom sequence setting", can I be sure that my sequences will look the same even if they don't use ProRes? The final deliverable format will be mp4 so as long as the overall look doesn't change then I can afford a change in the edit codec. It's just that with three sequences over an hour long, I don't want days of work to be ruined.
Other older PP projects of mine open and work fine.
Premiere Pro CC 8.2.0
Media Encoder CC 8.2.0.54
OSX 10.10.2
Any help would be greatly appreciated.
Duncan.

Adobe web chat come up with a solution.
Open the PP project.
Export your sequence or project as a Final Cut Pro XML file.
Set up a new PP project.
Import the Final Cut Pro XML file.
This will get you back up an running.
Since getting back to editing this project I have found that some things will be lost or change in using XML:
You will lose position key framing, black video clips, dissolve fx, audio levels, audio dynamic fx, the ability to open a multi camera clip and change the camera view.
You will keep cut points, crop fx.
Not perfect but only took a couple of hours to save 3 days work.

Error: Burner is in use by another application

Hi everyone!
I just tried to burn a CD for the first time in a while and receive an error stating that the "burner is in use by another application." I have no other applications running at this time and am running iTunes 11.01.
Is there something that I am doing wrong or can anyone help?
Thanks!

Feel free to purchase Toast at roxio.com.
I asked the question as in the Toast setup there is a dialog if you want to use Toast as your default burning program. If chosen it could possibly stop iTunes from burning. I am not sure if that is 100% correct but was offering ideas of where to look. Your update to 7.7.1 as you noted has cured the problem.
MJ

Ichat3 error message camera in use by another application

when i try and open ichat3 the video will not preview it tells me the camera is in use by another application which as far as i can see its not anyone got any ideas, thanks

Your last email was returned with a technical Error
Copy here
Ok,
My misunderstanding about which one was not working.
Go to your Home Folder/Library/Preferences and delete com.apple.ichat.plist as this will hold on to references to iUSBCam
Also check there is no com.ecamm.iUSBCam.plist hanging about.
Also check these two folders
System/Library/Input managers
and Library/Input managers
You are looking for anything that says iUSBCam and also for SIMBL which is a folder and may have more iUSBCam things in it.
(I can't remember which folder it is exactly)
10:21 PM Saturday; February 28, 2009

Workplace Installation Error: DB instance not found

Hello all,
While installing our Developer Workplace SR2 on our workstation, we encountered an error indicating that the database instance is not found.
FYI, we were able to successfully install two without the problem . It appears that during the installation, it was able to access the database - dropping the said instance - but failed in creating the database instance afterward.
Will reward points for helpful answers.
The log is located below:
> Subprocess starts at 20080729165754
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n BASP-BMZMT1S-D -d J2E -u control,********
Execute Session Command : sql_connect superdba,********
Execute Session Command : sql_execute SELECT USERNAME FROM USERS
Execute Session Command : exit
> Subprocess stops at 20080729165754
OK
OK
END
'CONTROL'
'DBSERVICE'
'SUPERDBA'
> Subprocess starts at 20080729170435
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n BASP-BMZMT1S-D -d J2E -u CONTROL,******** db_state
Execute Session Command : exit
> Subprocess stops at 20080729170436
OK
State
ONLINE
> Subprocess starts at 20080729170436
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n BASP-BMZMT1S-D -d J2E -u CONTROL,******** db_offline
Execute Session Command : exit
> Subprocess stops at 20080729170440
OK
> Subprocess starts at 20080729170441
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -s -d J2E -u CONTROL,********
Execute Session Command : db_offline
Execute Session Command : db_drop
Execute Session Command : exit
> Subprocess stops at 20080729170442
OK
OK
> Subprocess starts at 20080729170444
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n BASP-BMZMT1S-D -d J2E -u CONTROL,********
Execute Session Command : param_startsession
> Subprocess stops at 20080729170444
> Subprocess call failed
Error! Connection failed to node BASP-BMZMT1S-D for database J2E: database instance not found

Hello Juan,
Thanks for the prompt response.
As I reviewed the sequence of the installation, it appears that this could be an installation bug. The sequence does not make sense at all - it drops the database instance and starts a session after that - thus, resulting into the error.
The option I chose during installation is to recreate the default DB instance which is "J2E" that is made available during the MaxDB installation. Thus, it should recreate the "J2E" instance after the dropping of which -- this appears to be missing in the entire sequence.
The Resoultion/Workaround
Well, nothing amazing - but I just chose to make a different DB instance instead of using the existing J2E instance from MaxDB (i.e. DB1). In this approach, it does not have to drop the instance but instead create a NEW instance.
Not a definitive solution but a mere, common sense workaround. But I hope this helps those who has encountered the same issue through the same installation scenario.
Regards,
Jan

NW70 Installation Error - Central Instance

Hi All
I am trying to install the EP & BI and successfully finished Central Services Instance and and Database Instance, and when I started installing the Central Instance on App Server, after I entered the path of Oracle Client and click on next its throwing the error, Please see few lines of error:
        at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.<init>(PersistenceHandler.java:38)
        at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.<init>(ConfigurationCache.java:149)
        at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:236)
        at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:49)
        at com.sap.inst.jsourcecheck.TaskProcessor.process(TaskProcessor.java:69)
        at com.sap.inst.jsourcecheck.SourceChecker.doRun(SourceChecker.java:217)
        at com.sap.inst.jsourcecheck.SourceChecker.run(SourceChecker.java:146)
        at com.sap.inst.jsourcecheck.JSourceCheck.startAppJob(JSourceCheck.java:231)
        at com.sap.inst.lib.app.CommandLineApp.doMain(CommandLineApp.java:111)
        at com.sap.inst.jsourcecheck.JSourceCheck.main(JSourceCheck.java:252)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
        at java.lang.reflect.Method.invoke(Method.java:391)
        at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Caused by: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
        at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
        at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:146)
        at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:255)
        at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:387)
        at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:420)
        at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:165)
        at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:35)
        at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:801)
        at com.sap.sql.jdbc.NativeConnectionFactory.createNativeConnection(NativeConnectionFactory.java:215)
        at com.sap.sql.connect.OpenSQLDataSourceImpl.createPooledConnection(OpenSQLDataSourceImpl.java:608)
        at com.sap.sql.connect.OpenSQLDataSourceImpl.getPooledConnection(OpenSQLDataSourceImpl.java:285)
        at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:302)
        ... 17 more
Can you please check this and give your suggestions to solve this
Thanks
Sri

Hi Ruchit I was just checking some other log files, actually the APP server is trying to call the DB server name with the hostname, but we have not included the IP's in DNS, so we need to change the hostname to IP address. See the below error in system.log file:
#1.5^H# #1221844546278#/System/Database/sql/jdbc##com.sap.sql.jdbc.NativeConnectionFactory#######Thread[main,5,main]##0#0#Error#1#com.sap.sql.jdbc.NativeConnectionFactory#Java#com.sap.sql_0002#com.sap.sql.log.OpenSQLResourceBundle#SQL error occurred on connection : code={0,number,integer}, state="", message="".#5#17002#<null>#Io exception: The Network Adapter could not establish the connection#jdbc:oracle:thin:@omtr-sap-ddbp:1527:DBP#<null>#
Is there anything that we need to change the jdbc:oracle:thin string ?
Thanks
Sri

IP Configuration Error - IP address in use by another device

My parents' have set up a wirless netwrok in their home but are experiencing a IP configuration error.
They have Cable Broadband going into a cable modem. The modem is connected to a DLINK router via ethernet. The router has an ethernet connection to one computer (PC running Windows 2000) and an ethernet connection to a NETGEAR Wall-Plugged Ethernet Bridge XE102 which provides a wireless connection for an iMac G5 in another room.
The PC and the iMac are able to connect to the Internet without any problems. However, my PowerBook can see the NETGEAR network but it can access the Internet through it. The following error message keeps popping up:
IP Configuration Error
192.168.0.100 in use by 00:13:46:6d:26:11, DHCP SErver 192.168.0.1.
I read some previous posts that indicated it may be a problem with an IP address being assigned to a printer (and they do have an HP PSC connected by USB to the PC).
I can't seem to figure out how to free up the IP address. I checked the router settings and it is configured to assign more than just two or three.
Any ideas? Thanks in advanced.

Have you tried resetting your router and reseting your cable modem this should Asign all new IP address to all of the Computers on the network.
To reset your modem unplug it and leave it out for about 3 min and then replug it and the router should either have a reset button on it or from your computer you should be able to reset it.
I think your going to need to change your IP address but try resetting everything first.
see here.
http://forums.livingwithstyle.com/archive/index.php/how-change-your-static-t1847 50p1.html
Also this site will help if you change the PC's Address
http://support.microsoft.com/default.aspx?scid=kb;en-us;308199&sd=tech

Unable to open iPhoto - message states 'your photo library is either in use by another application or has become unreadable' Gone to 'Photo Library First Aid' but unsure of safest option as haven't backed up photos.

Can not open iPhoto in order to access pictures in library. I haven't backed up all my photos so I am concerned about loosing my pictures. what is the safest action to solve this problem?

Start by backing up now:
Most Simple Back Up:
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store
Then try restart your Mac.

Installation error - Error in invoking target 'ntcontab.o'

OS: RHEL 5 64bit
Oracle 10g (10.2.0.1.0)
Error in invoking target 'ntcontab.o' of makefile '/u01/app/oracle/product/10.2.0/db_1/network/lib/ins_net_client.mk'. See '/u01/app/oracle/oraInventory/logs/installActions2010-07-27_07-58-23AM.log' for details.
INFO: Start output from spawned process:
INFO: ----------------------------------
INFO:
INFO: rm -f ntcontab.*
INFO: (if [ "compile" = "compile" ] ; then \
     /u01/app/oracle/product/10.2.0/db_1/bin/gennttab > ntcontab.c ;\
     gcc -c ntcontab.c ;\
     rm -f /u01/app/oracle/product/10.2.0/db_1/lib/ntcontab.o ;\
     mv ntcontab.o /u01/app/oracle/product/10.2.0/db_1/lib/ ;\
/usr/bin/ar rv /u01/app/oracle/product/10.2.0/db_1/lib/libn10.a /u01/app/oracle/product/10.2.0/db_1/lib/ntcontab.o ; fi)
INFO: /bin/sh: line 2: /usr/bin/gcc: Permission denied
INFO: mv: cannot stat `ntcontab.o'
INFO: : No such file or directory
INFO: /usr/bin/ar: /u01/app/oracle/product/10.2.0/db_1/lib/ntcontab.o: No such file or directory
INFO: make: *** [ntcontab.o] Error 1
INFO: End output from spawned process.
INFO: ----------------------------------
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'ntcontab.o' of makefile '/u01/app/oracle/product/10.2.0/db_1/network/lib/ins_net_client.mk'. See '/u01/app/oracle/oraInventory/logs/installActions2010-07-27_07-58-23AM.log' for details.
Exception Severity: 1

Checking Packages (RPMs)
You will need some RPM development packages for the Oracle installer to build the Oracle modules, otherwise you will get error messages similar to this one:
Error in invoking target ntcontab.o of makefile
/u01/app/oracle/product/9.2.0/network/lib/ins_net_client.mk
NOTE: Always ensure to use the latest RPM versions!
Packages (RPMs) for RH 7.1, 7.2, and RH AS 2.1:
To see if these development packages are installed on your server, run the following command:
rpm -q gcc cpp compat-libstdc++ glibc-devel kernel-headers binutils
For instance, most of these packages will be missing when you installed RedHat 2.1 Advanced Server and if you did not select the "Software Development" package. For the RedHat 2.1 Advanced Server I executed the following commands to install the missing RPMs from the two CDs:
su - root
rpm -ivh cpp-2.96-108.1.i386.rpm \
glibc-devel-2.2.4-26.i386.rpm \
kernel-headers-2.4.9-e.3.i386.rpm \
gcc-2.96-108.1.i386.rpm \
binutils-2.11.90.0.8-12.i386.rpm

XI Installation Error - J2EE_ADMIN Password Mismatch

Hello all,
I am doing an XI 3.0 SR1 64 bit installation on SUSE Linux/Oracle. I have successfully installed the SAP WebAS 640 Unicode ABAP + J2EE system. The J2EE was installed against client 300, which was a USCV
system copy from client 000. All prequisites as described in SAP XI 3.0 SR1 Installation Guide - Doc Version 1 December 15 were followed.
The J2EE engine worked BEFORE starting the XI Installation. However, the XI installation crashed in phase 11 of 17 while trying to start the J2EE engine. It looked like the reason for the crash was becasue the number of the opened files at the time the engine was starting was too high and this caused ZipExceptions when trying to open the jar files for the services and libraries of the J2EE Engine. The error from the log was: 'ERROR:java.io.IOException: Too many open files'
It looked to be some sort of ulimit issue, which we corrected this. We updated the ulimit settings and tried re-running the XI installation from the beginning.
Now, at the start of the XI installation, when it prompts us for the J2EE_ADMIN password it says that we are entering the incorrect password. Yet, when I login to the ABAP stack to verify the J2EE_ADMIN password it is correct there. I know I am entering the correct password. Why is there a mismatch? Does SAP temporarily change the password when doing the XI installation? What can we do to reset the password?
Thanks for any help!
]eff Dubois

We just installed three XI systems on Linux/Oracle with SP 16.
The main thing to note is which client your J2EE engine reads the users/roles from. Did you try checking for the j2ee_admin user in both client 000 and 300?
Also, there are setting for the J2EE engine that show you which client it's reading the user/role information from.
Regards,
Jay Malla
Licensed To Code
Here is some information from OSS:
We received this info from SAP OSS.
I think you may have selected the incorrect user persistence during installation.
Please check the value of the property :-
ume.persistence.data_source_configuration
from the J2EE Visual Administrator
--> Cluster --> server0 --> services --> UME Provider
The value should be :-
dataSourceConfiguration_r3_roles_db.xml
Please refer to the attached note :-
#718383 NW04: Supported UME Data Sources and Change Options
and page 15 of the XI 3.0 SR1 Installation Guide, i.e.,
"During the install of the J2EE Engine you should choose the XI specificinstallation option for the J2EE Engine in UME User Group management (Use SAPGUI Transaction PFCG) "
If you did not select this option then unfortunately you will have to reinstall the system. Changing the value now will not resolve the issue as user roles have already been generated and mapped incorrectly
Please see the attached screenshot of the correct UME option to select during installation.
If you did select the correct option during installation and you have encountered this problem then please provide remote access to the Integration Server and J2EE Engine Visual Administrator as per the attached note :-
#769478 remote connections to XI systems
The problem that we're now facing is that our J2EE engine does not start. So we're chasing another SAP OSS note
-SAP Note Number: 810434
NW'04: J2EE does not start after switching UME persistence
We just restarted the system - the dispatcher starts:
503 Service Unavailable
6.40
Dispatcher running but no server connected!
SAP Note Number: 810434
NW'04: J2EE does not start after switching UME persistence
Version: 1, Note Language: EN, Released on: 01/19/2005
Symptom
After having changed the user persistence (datasource configuration file) to ABAP, the J2EE does not start.
Reason and Prerequisites
You have installed NW'04 SP3 with dataSourceConfiguration_database_only. You have switched to dataSourceConfiguration_r3.xml or dataSourceConfiguration_r3_rw.xml. After the change, the J2EE does not start. In the default trace, you get the following error messages:
Core service security failed. J2EE Engine cannot be started.
Caused by: com.sap.security.api.UMException: USER_AUTH_FAILED: Logonid "Guest" is not unique!
Solution
In the connected ABAP System, a user with logon id GUEST exists. Delete (or rename) the user GUEST on the ABAP System, and restart the J2EE.
SAP recommends to user the configuration file dataSourceConfiguration_r3_rw.xml for ABAP user store in the scenario described under Reason and Prerequisites.
In case you have installed >= SR1, you have already chosen the ABAP user repository during the installation. Thus, this error cannot appear. See note 718383 for the possible installation options

Why are programs released with so many bugs? Photoshop & Premiere Elements 12 installation errors

Microsoft windows 8 was buggy, but win 8.1 has even more program bugs. I cannot install either Adobe Photoshop Elements 12 or Adobe Premiere Elements 12. I get various errors - eg invalid serial number (when it isn't), general unspecified installation errors, roll back problems, 9 times I've uninstalled and reinstalled and rebooted. The Adobe Trouble-shooter does not help eg delete the swf file etc.
Why do you release programs with so many bugs?
How can I get my money back?
But Adobe Photoshop Elements 11 used to work fine...
Adobe is not the only company with Windows 8 problems....

A few days ago I bought the Photoshop elements 12 and with the help of the customer service chat I finally register and received the serial number, but accidentally closed the chat before obtain the link to download it. I 've tried in different ways with not results. Can anyone please help me to download and setup the software that I purchased? I'm new around here and have found it very difficult this new system, I think it was better when the program was purchased on disk and only the installation steps were followed, Sorry my insistence but took a few days on this and start to get frustrated by not receiving any response from the customer service and finally referred me to this forum. Should I return the prepaid card to the store?. Please help.

SCSM 2012 - Self Service Portal installation Error

Hi Everyone,
I am trying to update SCSM 2010 with 2012. So far I have successfully installed Database Server and Warehouse server, and now I am trying to install the self service portal but it is giving me an error saying "Setup has failed because of an unexpected
error. Please review C:\..\SCSMSertupWizard01.log for more details.
Here are some extra information in relation to this upgrade.
I have got 3 separate servers for my SCSM 2010 application. One act as a warehouse database server. second server holds the Service Manger Database and the third one has got Self-service portal on it.
Now as I said earlier, I did not face any issue upgrading the first two servers (warehouse and Database) but the last one is proving very difficult to just even start with.
Here is some interesting thing that is happening while I am trying to install my self service portal.
When I run the SCSM 2012 setup on my web portal server (Server 3) I get a setup screen with following option
and as I said earlier when I click this Upgrade option it starts the "requirements check" and fails just there with an error message.
Now here is the interesting thing, when I run the SCSM 2012 setup on my server 2 ( which has now got Database Server 2012 installed in it) gives me following option screen.
So when I select this option it starts to install Web content server and Sharepoint site server on my Database server. I do not want that. I want to have my web content server on Server 3 which already has SSP 2010 on it. I have also installed Sharepoint
2010 on my third server.
What is the solution here?
Do I have to merge my Database and Web content server? is it some sort of untold requirement of SCSM 2012 upgrade?
Please help me here.
Svapnil

Hi there,
thanks for the reply..
here is the screenshots of the log files.
Sorry all my 3 servers are on DMZ environment so it is bit hard for me to move files from virtual to live servers (Do not have enough permission level to do so!!)
Image No 2:
I hope this helps!!

I have using I phone 5c after connected with my HP elite book 6930p laptop, Automatic software driver is not deducting, and display Windows found driver software for your device (MTP USD Device) but encountered an error while attempting to install it.

I am using I phone 5c after connected with my HP elite book 6930p laptop, (Installed Window 7 32 bit). automatic software driver is not deducting, and display Windows found driver software for your device (MTP USD Device) but encountered an error while attempting to install it.
I did install itunes and update also. but the above problem still same.
Kindly give me solution of it. awaiting.
Regards
Abbas Kader

try it with another computer to check if it shows up
if so
uninstall all apple software
reboot
use regedit to search and remove all itunes keys
reboot
resinstall apple software
if non of that helps then try another cable
if that don't help could be your phones connector is damaged

Discoverer Admin installation error

Hi,
I am getting this error when installing Discoverer Admin (Business Intelligence Tools 10g 10.1.2.0.0) on my win XP sp1 workstation. It says that it cannot install onto an existing oracle home where oracle database 9.0 or higher database is installed. I do have 9i client and 10g client installed on my workstation. Is there anyway around this without having to uninstall everything?
Thanks,

Hey.
I finally solved my own problem. It's not exactly the most elegant way, but I had to trick the installer into thinking this was a fresh install. under c:\program files\oracle\inventory there is a install.platform file. I changed the value in it to some other version from 912. The oui then complained that the inventory could not be found and would not move forward. I then went back and changed the value back to 912 and then clicked next in the oui again. This time it thought this was a fresh installation and I was able to specify another inventory directory. which I did. After that, the install went through. But I did not exit the oui when I modified the file.
Hope this helps others.
Thanks,
Piyush

Secondary site installation error: CONFIGMGRSEC instance is used by another secondary site,installing secondary site by choosing option automatically install Express SQL not selecting Lower option

Similar Messages

Maybe you are looking for