Secondary zone stopped resolving from named

I have AD as secondary zone in Netware 6.5.8 named
Suddenly the secondary zone stopped resolving causing havoc
Any ideas what can be done?
Seb

Had to delete the zone, re-create, and do named -zi
and after a while all came back to resolving normally
Seb
"Sebastian Cerazy" <sebastian.cerazy@(nospam)spgs.org> wrote in message
news:OT6Ms.1090$[email protected]..
>I have AD as secondary zone in Netware 6.5.8 named
>
> Suddenly the secondary zone stopped resolving causing havoc
>
> Any ideas what can be done?
>
> Seb
>
>

Similar Messages

  • OD replica, DNS secondary zone, server will not resolve itself

    We are testing an OD replica to run in a separate location from our OD master. Master OD and DNS is all set and working as expected. Separate location network user connections and DNS all work as expected when calling the OD master and DNS primary zone. The OD replication works fine. I want to use the same machine as a DNS secondary zone getting its records from the DNS on the OD master. DNS secondary zone seems to pull the records from the primary without trouble.
    In testing the secondary DNS without forwarders or backup DNS systems, known internal addresses are resolved by the clients correctly. The issue that I am trying to resolve is that server will not resolve itself. I have the System Preferences / Network / DNS pointed to 127.0.0.1. The DNS is resolving for the clients. Running changeip -checkhostname gives
    "The DNS hostname is not available, please repair DNS and re-run this tool."
    If I ask a client to browse to the server's web site it resolves fine and I get the default page as expected.
    With all of the above in mind, binding a local client to the OD replica and pointing the clients' DNS at the DNS secondary zone results in failure of the bind and the client saying that the server is not responding. If the DNS on the client is pointed to the DNS primary zone, the bind works fine and everything behaves as expected. Pointing the Server to the DNS primary zone resolves the problem as well and it is able to resolve itself.
    The problem is that if our connection to our primary site goes down, I want everything to function independently at the second location. If the primary DNS zone is gone the OD replica server cannot resolve itself and authenticaion then does not happen making the OD replica pointless.
    Any ideas?
    Thanks.

    Found it. I did not copy the reverse mappings from the primary DNS zone.
    On the primary zone
    - In Server.app/DNS/ select show all records in the gear
    - double click reverse header for each subnet and indicate to allow zone transfer for the reverse records
    On the secondary zone
    - Add additional secondary zones for the exact title of each reverse record zone
    - example main records are FQDN.com
    - reverse records are 2.81.10.in-addr.arpa for the items in the 10.81.2.0 subnet
    OD replica now resolves itself.

  • [SOLVED] How Can I Stop DHCPCD from Overwriting my /etc/resolv.conf...

    Hey guys,
    For some unknown reason /etc/dhcpcd.conf continually overwrites my /etc/resolv.conf file, eventhough I set the "nohook resolv.conf" hook in /etc/dhcpcd.conf.
    This is screwing up my DNS and intermittently creating connection problems. Any of you guys know why the hook is not taking effect or how I can stop dhcpcd from overwritting this file?
    Thanks
    Last edited by w201 (2013-03-18 19:05:15)

    drcouzelis wrote:
    w201 wrote:I set the "nohook resolv.conf" hook in /etc/dhcpcd.conf.
    kaszak696 wrote:
    dhcpcd's configuration file may be edited to prevent the dhcpcd daemon from overwriting /etc/resolv.conf. To do this, add the following to the last section of /etc/dhcpcd.conf:
    nohook resolv.conf
    I don't think that information will help w201...
    I changed my DNS to the Google one (8.8.8.8 or something). That's in "resolv.conf", isn't it? I remember editing some OTHER configuration file, which is then read to create the "resolve.conf" file. There it is, in that link to the wiki, under "Use resolv.conf.head". Does that help you do what you want to do?
    There's three techniques at the wiki link, the nohook one, the resolv.conf.head one and the write-protection attribute. 

  • Sync calendar puts appt in 2 times, why? I want to stop it from happening.

    When I add appointments to my Outlook email calendar or in my iPhone 3gS, and sync again...it puts the scheduled appointment on my calendar twice. If I only display one calendar, it shows the appointment one time. This "double appointment happens when both calendars are displayed...my iphone shows that I have two accounts, "work email (Exchange)" on my puter, and "From my PC".
    Can I delete one off the calendars off my iphone? Can you tell me how to do that? I checked out "Settings" but I don't see how you can stop this from happening.
    Any recommendations? I put appointments into my iPhone and want those to update into my calendar in outlook when I sync the phone to my puter. I also add appointments at work (in the same outlook account) and want those appointments to be put into my phone. I just want ONE appointment to be in my phone, not two of the same thing!

    PHIemspilot, you get the credit for guiding me to find a solution. For those that might read this thread later, here is a brief explination of how I fixed this concern;
    As for multiple (identicle) phone number listings...
    1. in my iPhone 3gS, I went to "settings', then opend "Mail, contacts, calendar". In that page, I scrolled to the bottom and under 'contacts', I set 'Default Account' to my work email (you will have named your email account something else, just pick one (1) account as the default account...NOT "from my PC". I believe that took the second copy of contacts away from my list!
    As for identicle calendar reminders, I used the same page in my iPhone (Mail, Contacts, Calendar) and under the 'Calendars' section, I chose my 'Default Calendar' to be my Exchange Account.
    Ultimately, I believe if you have "from my PC" selected for either your calendar or your contacts list...you will have double postings for everything. If you change your settings to a specific account...it will only show the list one time. As long as your iPhone is synced with your computer (for calendar as well as contacts...this should resolve your issues.

  • How can I stop Firefox from opening (to "File Not Found") when opening my Opera browser?

    Ever since I installed Opera 10.61 on my new computer (Windows 7 Ultimate operating system), whenever I open Opera, Firefox opens one second later with the following error message:
    '''File not found '''
    Firefox can't find the file at /C:/Users/Nasheed/AppData/Local/Opera/Opera/temporary_downloads/client-en.xml.
    * Check the file name for capitalization or other typing errors.
    * Check to see if the file was moved, renamed or deleted.
    TRY AGAIN.
    <nowiki>****************************************************</nowiki><br />
    This happens EVERY TIME I OPEN THE OPERA BROWSER. How can I stop this from happening? I'm stumped.
    [EXTRA INFO - I was unable to enable Firefox to access my previous profile on the new computer (despite putting the old profile in the appropriate Mozilla Firefox folder. So, there are now two profiles in that location.
    After reading the answer to another forum member's question, I attempted to resolve the problem using Profile Manager, but I was unable to locate the Profile Manager. The Windows "Search" feature is not enabled on my new computer (nor can it be enabled from the Customize Start Menu options).]

    Thank you for your response, Cor-el.
    I had Opera set as my default browser since this began happening. I changed my default browser back to Firefox mainly because having Firefox open one or two seconds every time I open Opera was/is such a nuisance.
    I believe this problem began because I attempted to manually transfer the files from my old computer to the new one (via the backed up files in my external drive). I was unfamiliar with Windows 7 when I did this. Microsoft changed the file set up from what I had been used to in Windows XP. I used XP for six years before being exposed to Windows 7 (I never had Vista).
    I'm almost sure this problem has something to do with where I placed the application data when I was trying to reestablish the program set up on the new computer.

  • I clicked on iMessage on my Macbook Pro today for the first time, and now NOTES keeps opening up every 5 seconds, with a new note.  I cannot stop it from opening. If I close it or force close, it opens again in 5 seconds.  I can't get rid of it.  I have

    I clicked on iMessage on my Macbook Pro today for the first time, and now NOTES keeps opening up every 5 seconds, with a new note.  I cannot stop it from opening. If I close it or force close, it opens again in 5 seconds.  I can't get rid of it.  I have tried to clear out the iMessage settings I had put in, and I've tried to adjust the Accounts to not include notes to synch.  But, Notes will not stop.  It opens a new note, and even if you ignore it, it assumes preference every 5 seconds, and the Mac is impossible to use.

    Do you have any Boot Camp or other secondary partitions set up on your system? If so then try running a disk verification routine (chkdsk, etc.) in Windows to repair the disk. While I've not heard of it happening recently, in the past errors in these partitions have resulted in stubborn ghost files appearing in OS X.

  • How do I stop iCal from changing my appointment times when traveling?

    Once again I missed an important meeting as I had entered it into my iPhone so that event is to start at 10 AM. Last night I flew to this city which is two hours ahead of my town. So what again happened is that iCal just decided to change the time of my appointment to 12 AM.
    Why on earth would iCal asume that I would eneter the event into it in my hometowns time? I mean, when agreeing on the phone with a client, you do not say I'll be there 10 AM my time. You obviously say "ok let us meet at 10 AM".
    So how do I stop this from happening.

    I was having the same problem and spent some time on the phone with apple today.(new computer is under apple care). Tried a ton of stuff with different folks and ultimately I (well, me and 3 apple specialists) was able to solve this issue.
    Here's the break down:
    1. Quit Mail, Calendar and Messages.
    2. Open: System Preference -> Mail, Contacts & Calendars
    3. Delete all your google accounts (using the little minus button below your account list)
    4. Restart your computer.
    5. Re-add your google accounts. (Obviously, keep the calendar box checked).
    6. Open calendar and wait for your google info to populate.
    7. Attempt to add an event with correct time zone.
    IMPORTANT NOTE:
    Events I created while I was having the problem still had the problem.
    I simply deleted those broken events and recreated them with refreshed settings.
    I've only had this working for a few hours so I'm not certain it will stay working forever.
    But for now it is a relief.
    I realize deleting and re-adding the accounts is annoying but it's a lot less frustrating than seeing UTC every time you add an event.
    Hope that helps everyone else having this problem.

  • How do I stop iMac from going to sleep automatically after 15minutes of inactivity

    How do I stop imac from shutting down automatically after 15minutes of inactivity, trying to play music but the imac keeps going to sleep, tried changing power saving preferences to never shut down, never go to sleep, unticked put the hard disks to sleep, automatically reduce brightness, but still goes to sleep.

    Try a PRAM/NVRAM reset.
    Resetting NVRAM / PRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    After resetting NVRAM or PRAM, you may need to reconfigure your settings for speaker volume, screen resolution, startup disk selection, and time zone information. If issues persist, your Mac's logic board battery may need to be replaced. The logic board battery helps retain NVRAM/PRAM settings when your computer is shut down. You can take your Mac to a Mac Genius or Apple Authorized Service Provider to replace the battery on the logic board.

  • How to stop iTunes from looking in old media folder location?

    Several years ago, I moved my iTunes media onto an external drive attached to my Airport Extreme, because I was  running out of room on the internal drive.
    I had all the usual problems with iTunes looking on the internal drive, but it mostly worked okay, as long as I didn't mind only being able to access my music at home.
    A few months ago, I got a 2TB internal drive, and told iTunes to use the default media folder location on the internal drive again. I also check to keep iTunes media folder organized, and to copy files to the iTunes media folder when adding them to the library. I had already manually copied the folder structure over from the external drive.
    I noticed that when I would start iTunes, I would see the activity light on the external drive, and it would be mounted on my Desktop. I checked, and the location for the media folder was still correct in preferences. I checked a file or two and (this seems to be gone in iTunes 12.1) it was still showing the file location on the other drive.
    I tried to manually "cut the cord" by renaming the folder on the external drive, but iTunes was cleverer than that.
    What do I need to do to stop iTunes from looking for files in the old location? I'd like to reclaim that space, but I'm afraid to remove anything over there, in case iTunes has been putting things over there instead of the new, correct location.
    This is a MacBook Pro 8,2 i7, with 10.10.3 and iTunes 12.1.x.
    Thanks,
    Sean

    Manually moving files yourself and telling iTunes where to store media in preferences does not do what oh so many people who come here with issues think it does. Changing iTunes' media storage preferences only tells iTunes where to store new media.  iTunes still looks for old media where it last saw it, namely on your external drive.  You have to let iTunes do the relocating of the old media files by consolidating to the internal drive.  It will cheerfully ignore any changes you do in Finder yourself.
    iTunes 12 for Mac: Change where your iTunes files are stored - http://support.apple.com/kb/PH19507 - more information at: https://discussions.apple.com/message/22026652#22026652 - and steps 5-8 in https://discussions.apple.com/message/24491967#24491967

  • How can I stop safari from auto completing url's on my iphone 4 and ipad2?

    How can I stop safari from auto completing url's on my iphone 4 and ipad2?  On both devices I have cleared history, I have gone into settings-safari-and cleared history and cleared cookies & data, tried turning my devices on and off and I also have private browsing turned on. Both devices are operating on iOS 5.  When I type in a url I don't want anything to show and auto complete.  Any suggestions?

    This indicates corrupt files.
    A restore should resolve.

  • How do I stop itunes from downloading a very large apps that I downloaded direct to my iphone?

    To get around my 5GB limit for internet service, I download a very large (350MB) dictionary app directly to my iphone using a wireless website run by a merchant in town. Now every time I run itunes, it wants to download the app. Is there any way I can stop itunes from attempting the download?

    Some types of issues, such as that one, can't be resolved by the volunteer support here. If I think a request can be answered in the boards but was posted in the wrong part of them, I'll just ignore the fact it's in the wrong place.
    (65827)

  • Premiere Elements 11 stops importing from DV

    Premiere Elements 11, Windows 8 32, External USB-HD
    Hi,
    I am trying to convert my friends' MiniDV videos. I work with a borrowed laptop that has Elements on it but I am not familiar with it. The import always stops after about 18:30 and I get an error message about filesize. The filesize is about 4GB. I vaguely remember some Windows restriction (from the old days). Could that be the reason? And how and where do I change that?
    Another question: Is there a way to stop Elements from breaking the video into scenes? All my friends what is to transfer the videos to the harddisk. No fancy transitions, themes etc.
    Thanks.

    Hans
    The good news is that you were able to capture your DV data with Windows Movie Maker if not Premiere Elements.
    Since that is the case, I do not know if you have any more time or want to do any further troubleshooting on DV data capture firewire into Premiere Elements Capture Window.
    If you should, we might revisit a lot of what we did and then more.
    a. Scratch Disks. Especially the Captured Video and Audio, but also any preview files or conformed video and audio files pile ups. Have you checked the Adobe Premiere Elements Preview Files Folder and Media Cache Folder? Has your computer been defragmented lately.
    b. General computer optimization with a product such as ccleaner (regular and registry components).
    c. In general for runtime error
    http://helpx.adobe.com/x-productkb/global/troubleshoot-c-runtime-errors-products.html
    There is a Premiere Elements 11 preference file named Adobe Premiere Elements Prefs. On Windows 7, 8, and 8.1 64 bit it can be found in the path
    Local Disc C
    Users
    Owner
    AppData
    Roaming
    Adobe
    Premiere Elements
    11.0
    and in the 11.0 Folder is the Adobe Premiere Elements Prefs file that you delete. Work with Folder Option Show Hidden Files, Folders, and Drives active so that you can see the path.
    But, if you are working in Windows 8 32 bit, I am not sure where that would be...guess is
    Local Disc C
    Documents and Settings
    Owner
    Application Data
    Adobe
    Premiere Elements
    11.0
    and in the 11.0 Folder would be the Adobe Premiere Elements Prefs file that you delete. Again, work with Folder Option Show Hidden Files, Folders, and Drives active so that you can see the path....just in case.
    Thanks you for all your follow ups. Continued success with your projects.
    ATR

  • How can we stop iPrint from pushing out printers?

    Is there a global way to stop iPrint Client Management from pushing out printers? Or, is there a way to report on all group objects that have a printer assignment? We are trying to stop printers from being pushed, but we have 100+ group assignments, as well as some printers that are specifically assigned to users. Trying to find them all and then change them all is going to be a difficult task. We're hoping there's a setting in the Driver Store or Print Manager that we missed.
    Thanks,
    Joe

    jmarshallfcc,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://forums.novell.com/

  • Verizon is using the Elipsis tablets to steal data from their customers.  The only way to stop data from registering as cellular data is to pull the SIM card.  This occurs with wifi enabled and cellular,dara disabled.  If,you take your tablet to a Verizon

    Verizon is using the Elipsis tablets to steal data from their customers.  The only way to stop data from registering as cellular data is to pull the SIM card.  This occurs with wifi enabled and cellular,dara disabled.  If,you take your tablet to a Verizonstore they will upgrade your data plan to cover the overage and credit the upgrade.  You will then have to remember to downgrade your plan or continue to pay for more data.  Verizon, how would you feel if I walked into one of your stores and started filling my pockets with merchandise?  If cought can I just give the product back and say "oops, sorry"

    Today, my FCC complaint hit the same person working on the BBB complaint.  Jimmie has been very nice and seems willing to work with this problem.  We have been able to come to an agreement.  I paid the purchase price for the phone and he returned my upgrade and unlimited data plan.  This is what would have occurred if Verizon had given me correct information to begin with.  I am happy with this result.  He also brought quite a few instances concerning the handling of my transfer and upgrade that did not follow proper procedure.  I am also confident that I would not have resolved this without complaining to BBB and or FCC.  Verizon had no interest in solving the problem nor did they show any propensity to keeping a 20 year client.  Even though this last CSR was very polite and helpful, his sole job is to respond to formal Federal and State complaints.  He is required by law to address every complaint and report the reporting agency the agreed upon results - good or bad.  Again, I suggest - If you are not getting the proper customer service, complain to someone outside of Verizon.  Jimmie had not received any complaints registered with Verizon directly and I still have not had any contact with any other management representative that I was told would call.

  • How to stop Lightroom from auto-adjusting RAW files

    Is there a way to stop Lightroom from automatically "fixing" my RAW files? When I first load them in they look perfect (like they do on the back of my camera), but then LR auto-adjusts them to make them dull and desaturated and not at all contrasty. Is there a way that I can set LR to not do anything to the files and let me decide what I want the original to look like?

    I totally understand where II is coming from. I too find it bothersome that in some images, the pre-processed preview is a more pleasing image than the unprocessed RAW. At the same time, it is the unprocessed nature of the RAW image that is the whole attraction and point to shooting RAW. An obvious workaround (if one is willing of course) is to shoot RAW+JPEG so as to either have the JPEG as a "target" reference or final image when suitable. And that is an option I used to employ until I got tired of dealing with the issues of essentially doubling the number of images I was working with.
    I do disagree with II's thought that the preview showing up is slowing down any processing of the RAW image. It would seem to me that the whole reason the preview is showing up is that it is a prerendered aspect of the file that pops up while the actual preview rendering is taking place. While I don't claim to have technical knowledge as to how this all works, I would think that LR is simply showing the initial rendering of what the RAW file is telling LR it looks like until LR can actually make it's OWN interpretation. Either way, the process is fast enough that it isn't a huge issue to me on my system. In fact, those images where I see a vast difference between the inital preview image and the LR rendered resolve no slower than the rest.
    It is interesting to know that there are applications/utilities out there that will extract that inital preview though. I thionk it would be very cool if LR made use of such a capability more directly as an option.
    Anyway, while the frequency of my use of LR so far pales in comparison to that of PS and Bridge, so far I can say that such discrepency between nice looking inital preview and less than so RAW is far less common than it is working with PS and Bridge CS2.

Maybe you are looking for