Secondry Resource confirmation

Dear All.
We are using Process Order, for some phases we have assigned secondry resources. If my yield quantity is 100 Kg then i require 10 Hr in phase & also in secondry resources while confirmation of phase if i do partial confirmation for 50 Kg system automatically calculate activity of 5 Hr like same if i confirm secodry resource there is no option of yield quantity so that it always consider as 10 Hr so please suggest is it possibel to active yield field in confirmation of secondry resources for calculating activity???
Regards..

Dear Dev123,
If my understanding is correct, then this secondary resources are the additonal resources that are required for processing an
activity when an operation /phase is carried.The system only helps in capturing the cost for performing additonal activities and
not any yield against the secondary resources.
If my understanding is correct then the system does not considers the secondary resources even during order scheduling.You
can check the same in the time calculations during order scheduling.
You can check the same behaviour in the T.code COR6N/COR6.
Regards
Mangalraj.S

Similar Messages

  • Interested in PLM

    Hi All,
    I am BW consultant.Interested in PLM .Could you please tell about PLM and if I want learn PLM what shall i do? This module comes under functional or technical?
    Thanks,
    Rakesh

    Hi Rakesh,
    There are different tracktion for PLM in SAP
    1. <b>Product Data Management</b>
    which covers Material Management, Bill of Material, Document Managment System, Classification System, Variant Configurations, CAD Interfaces. etc.
    Most of the Industries will be using these cross application components for their Engineering Departments.
    2. <b>Program Management</b>
    Where Entire Program is capture i.e. From Customer Enquirry to the Order execution and till Dispatch.
    Here again Project System, CFolder, CProjects, DMS, MM, BOM, Workflow etc can be a part of the PLM
    3. <b>Asset LifeCylce Management</b>
    This is used in different Scenarios where companies wants to trace there assets
    or lifecycle of their assets.
    Project Systems and DMS will be mostly involved.
    4.<b> Quality Managment</b>
    Strictly Speaking PLM Products are used in R& D Department, Engineering Department, Design & Drafting Departments of the Companies/organizations,
    Where they try to modify their existing Products, try to Design as per the customer requirements, Try to launch new Product by doing R & D works.
    PLM is Mostly used in these Departments of the Organizations
    SAP Material Material Details:-
    http://help.sap.com/saphelp_ppm400/helpdata/en/index.htm
    http://help.sap.com/saphelp_cpro31/helpdata/en/home.htm
    For Certification on SAP PLM follow the below link:
    https://websmp203.sap-ag.de/certification
    (Note you need Service ID to access this link)
    Certification - Solution Consultant
    Certificate Name Exam Topics Duration (h)/
    No. of questions Software
    Components Curriculum Booking Code
    (SAP internal)
    mySAP PLM – Quality Management (2005) German/English 3 / 80 mySAP ERP2005 (ECC 6.0) C_TPLM40_05
    PLM - Maintenance & Repair with mySAP ERP 2005 German/English 3 / 80 SAP ECC 6.0 C_TPLM30_05
    PLM - Project Management with mySAP ERP 2005 German/English 3 / 80 SAP ERP Central Component 6.0 English/German C_TPLM22_05
    mySAP PLM – Quality Management (2003) German/English 3 / 80 SAP R/3 Enterprise English/German C_TPLM40_03
    mySAP PLM - Project Management (2003) German/English 3 / 80 SAP R/3 Enterprise German/English C_TPLM22_03
    mySAP PLM - Asset Life Cycle Management - Plant Maintenance (2003) German/English 3 / 80 SAP R/3 Enterprise German/English C_TPLM30_03
    mySAP PLM - Asset Life Cycle Management - Customer Service (2003) German/English 3 / 80 SAP R/3 Enterprise German/English C_CS47_03
    SAP Consultant Certification
    Solution Consultant PLM - Project Management with mySAP ERP 2005
    Software components: SAP ERP Central Component 6.0
    Certification exam is included in course TPLM22 and is also offered in separate certification events at many SAP locations.
    Certification ID (Booking code): C_TPLM22_05
    Certification duration: 3 hours
    Number of certification questions: 30
    Required certificates for participation in this certification test: None
    Consultant Academy courses for certification preparation: TPLM20 (Project Management I), TPLM22 (Project Management II (Case Study))
    Alternative Project Team Training courses for certification preparation: PLM200 (Project Management), PLM210 (Project Management - Structuring), PLM 220 (Project Management – Logistic), PLM230 (Project Management – Controlling), PLM240 (Project Management – Reporting)
    Please note that you are not allowed to use any reference materials during the certification test (no access to online documentation or to any SAP system).
    The certification test Solution Consultant PLM – Project Management with mySAP ERP 2005 verifies the knowledge in the area of the mySAP Product Lifecycle Management for the consultant profile Project Management. This certificate proves that the candidate has a basic understanding within this consultant profile, and can implement this knowledge practically in projects.
    The certification test consists of questions from the areas specified below:
    Topic Areas
    1. Project Structuring (+++)
    Basic data in PS: work breakdown structure, network and activities, milestones, PS texts, documents
    Project Builder and project planning board
    Project simulation
    Standard work breakdown structure, standard network
    Assembly processing
    2. Dates
    Time scheduling and scheduling (network scheduling, project scheduling, overall network scheduling)
    Actual dates
    3. Resources
    Work center
    Capacity planning and capacity evaluation
    Workforce planning to HR resource
    Confirmation and working time sheet
    Internet scenarios
    Workflows in PS
    4. Material
    Work breakdown structure BOM
    BOM PS interface
    Component assignment in the network
    Material procurement through in-house production or external procurement
    Collective stock and project stock
    Requirements grouping
    Progress tracking
    ProMan
    Delivery from the project
    5. Costs and Budget (++)
    Cost planning in the work breakdown structure
    Network costing
    Assigning orders to the project
    Budgeting and availability control
    Commitment and actual costs through account assignment and order assignment
    6. Revenue and Payments
    Revenue and payment planning in the project
    Sales pricing and quotation creation
    Resource-related billing
    Milestone billing and down payment processing
    7. Period-End Closing
    Template allocation
    Application of overhead
    Interest calculation
    Progress analysis and Progress Analysis Workbench.
    Results analysis
    Incoming orders
    Settlement
    8 Miscellaneous
    Exernal service and service activities
    Organizational units in SAP ERP
    Info systems in project management
    Field selection
    OpenPS
    Amount of questions by topic (as percentage of test):
    + = 1 - 10%
    ++ = 11 - 20%
    +++ = over 20%
    SAP Consultant Certification
    Solution Consultant mySAP PLM – Quality Management (2003)
    Software components: R/3 Enterprise (SAR R/3 Enterprise Core 4.70/SAP R/3 Enterprise Extension Set 1.10)
    Certification duration: 3 hours
    Number of certification questions: 80 multiple choice questions
    Required certificates for participation in this certification test: None
    Courses for certification preparation:
    PLM400 (Quality Management) or LO170 (Quality Management)
    PLM405 (Quality Inspections) or LO705 (Quality Inspections)
    PLM410 (Quality Notifications) or LO710 (Quality Notifications)
    PLM415 (QM in Procurement) or LO715 (QM in Procurement)
    PLM420 (QM in Discrete Manufacturing) or LO720 (QM in Discrete and Repetitive Manufacturing)
    PLM421 (QM in the Process Industry) or LO721 (QM in the Process Industry)
    PLM425 (QM in Sales and Distribution/Quality Certificates) or LO725 (QM in Sales and Distribution/Quality Certificates)
    Participants who have attended the prerequisite courses in SAP R/3 4.6C, can learn about the new developments for SAP R/3 Enterprise by attending the delta course D47QM.
    TPLM40 Quality Management (Case Study)
    Please note that you are not allowed to use any reference materials during the certification test (no access to online documentation or to any SAP system).
    The certification test Solution Consultant mySAP PLM – Quality Management (2003) verifies the knowledge in the area of the mySAP Product Lifecycle Management for the consultant profile Quality Management. This certificate proves that the candidate has a basic understanding within this consultant profile, and can implement this knowledge practically in projects.
    The certification test consists of questions from the areas specified below:
    Topic Areas
    1. Integration of QM and MM (++)
    Material master
    Quality info record: Procurement
    Source inspection, GR inspection
    Vendor evaluation, vendor release, vendor selection
    Manufacturer part number
    Handling Unit Management
    Warehouse Management
    2. QM in Discrete Manufacturing (++)
    Integrated inspection planning
    Routing, reference operation set, rate routing
    Inspection during production
    Inspection at end of production
    Inspection for external processing
    Inspection during repetitive manufacturing
    Statistical Process Control (SPC)
    3. QM in the Process Industry
    Integrated inspection planning
    Master recipe
    Integrated inspection processing
    Inspection during production
    Inspection at end of production
    Batch valuation
    Recurring inspections
    Statistical process control (SPC)
    Engineering change management
    Digital signature
    Batch record
    4. Integration of QM in the areas Service and Sales and Distribution
    Inspections for delivery
    Quality info. record: Sales and Distribution
    Make-to-order production
    Make-to-stock production
    Repairs and returns processing
    5. Quality Planning (++)
    Basic data
    Inspection planning
    Logistics master data
    6. Quality Inspections (++)
    Inspection lot
    Defects recording
    Results recording
    Usage decision
    7. Quality Certificates
    Certificate planning
    Certificate creation
    Quality certificates on the Web
    Quality data interchange
    8. Quality Notifications
    Notification systems
    Customer complaint
    Complaints against vendors
    Internal problem notification
    Simplified notification
    ISR
    SAP Support Desk
    Solution database
    9. Quality Control (++)
    Dynamic modification
    Statistical Process Control (SPC)
    Quality key figures, results history
    Quality-related costs
    Standard analyses, flexible analyses, early warning system
    Business Information Warehouse
    Interfaces to subsystems (QM-STI)
    10. Test Equipment Management
    Test equipment
    Calibration planning
    Calibration inspection
    Test equipment tracking
    11. Sample Management
    Physical samples
    Physical-sample categories
    Confirmation requirement
    Sample-drawing procedure
    12. Stability Studies
    Creating a stability study
    Initial test
    Stability planning
    Stability tests
    Completing a stability study
    13. Configuration and Organization
    Customizing
    Enhancements
    BAPIs
    BAdIs
    Field selection
    Lists
    Status management
    User roles
    Analysis tools
    Interfaces
    Follow-up actions
    SAPScript Forms
    Authorization concept
    Amount of questions by topic (as percentage of test):
    + = 1 - 10%
    ++ = 11 - 20%
    +++ = over 20%
    SAP Consultant Certification
    Solution Consultant PLM - Maintenance & Repair with mySAP ERP 2005
    Software components: SAP ECC 6.0 ( SAP ERP Central Component 6.0)
    Certification exam is included in course TPLM30 and is also offered in separate certification events at many SAP locations.
    Certification ID (Booking code): C_TPLM30_05
    Certification duration: 3 hours
    Number of certification questions: 80 multiple choice questions
    Required certificates for participation in this certification test: none
    Courses for certification preparation: PLM300 (Business Processes in Plant Maintenance), PLM305 (Structuring and Managing Technical Objects), PLM310 (Preventive Maintenance and Service), PLM315 (Maintenance Processing: Operational Functions), PLM318 (Analytics in Enterprise Asset Management), TPLM30 (Asset Life-Cycle Management - Plant Maintenance (Case Study))
    Please note that you are not allowed to use any reference materials during the certification test (no access to online documentation or to any SAP system).
    The certification test Solution Consultant PLM - Maintenance & Repair with mySAP ERP 2005 verifies the knowledge in the area of solution mySAP Product Lifecycle Management for the consultant profile Maintenance & Repair. This certificate proves that the candidate has a basic understanding within this consultant profile, and can implement this knowledge practically in projects.
    The certification test consists of questions from the areas specified below:
    Topic Areas
    1. Organizational Units and Master Data in Plant Maintenance (++)
    Organizational Units
    Maintenance Plant and Planning Plant
    Work Centers
    Functional Locations
    Structure Indicator
    Reference Location and Functional Location
    Creation Options
    Data Transfer
    Equipment
    Installation/Dismantling at Functional Locations
    Equipment Hierarchy
    Change Documentation
    Equipment Category
    Synchronization of material/construction type
    Synchronization of equipment/serial number
    Material and Serial Numbers
    Serial Number Profile
    Goods Movement and Warehouse Stock
    Valuation Batches
    Bills of Material (BOM)
    Assemblies
    BOM Categories
    Item Categories
    Change Documentation
    Additional Functions
    Classification
    Measuring Points and Counters
    Partners and Addresses
    Document Link
    Status Management
    2. Maintenance Processing (+++)
    Corrective Maintenance
    Notification Types
    Objects and Object Information
    Catalogs and Catalog Profiles
    Integration Notification/Order
    List Viewer for Notifications and Orders
    Order Type
    Object List
    Operation List
    Relationships
    Material List
    Availability Check
    Order Release and Printing
    Material Withdrawal
    Completion Confirmation in Time
    Technical Completion Confirmation
    Technical Completion
    Action Log and Document Flow
    Processing External Services
    External Services as Individual Purchase Order
    External Services with External Work Centers
    External Services with Service Entry Sheets
    Processing Refurbishment Tasks
    Valuation Type and Valuation Category in the Material Master
    Refurbishment Without Serial Numbers
    Refurbishment with Serial Numbers
    Inventory Management and Controlling
    Processing Maintenance Projects
    Planning and Executing Maintenance Projects
    Completion, Settlement, and Monitoring of Maintenance Projects
    Capacity Planning
    Scheduling
    Work Center and Available Capacity
    3. Controlling Functions in Plant Maintenance (++)
    Plant Maintenance in the Organizational Structures of Accounting
    Cost Estimation
    Planned/Actual Cost Determination
    Order Settlement
    Logistics Information System (LIS)
    Plant Maintenance Information System (PMIS)
    4. Preventive Maintenance (+++)
    Task List Management
    Task List Types
    Profile and User Fields
    Component Assignment
    Task List and Order
    Single Cycle Plan
    Structure
    Scheduling Indicator
    Deadline Monitoring
    Change Documentation
    Strategy Plan
    Maintenance Strategy
    Task List and Maintenance Strategy
    Change Documentation
    Performance-Based Maintenance Planning
    Counters and Measurement Documents
    Maintenance Plan Scheduling
    Deadline Monitoring
    Maintenance Planning with Multi-Counter Plans
    Cycle Sets
    Link Type
    Weighting Key in the Test:
    + = 1 - 10%
    ++ = 11 - 20%
    +++ = over 20%
    Regards
    Rehman
    Reward Your Points If Useful

  • SAP PLM

    Hi Guys
    I am have working on PDM(Team center), VPM(Enovia DPM) and Catia V5 since 2 years now and I am planning to change to SAP PLM. Can any one help me Do i need to Have knowledge in any other things other then PDM, VPM to start up with SAP PLM.
    If I want to take p my certification in SAP PLM where can i get it,( Do i need to contact Siemens for it or i can try with some other place)
    Your help will be Appreciated
    Pradeep

    Hi Pradeep,
    1.As you have worked in PDM (Team Center), and other CAD packages, you will be knowing the Functional processes/activities involved in the PLM which is very much required to learn and give solutions in SAP PLM.
    2. As you must have worked with BOM, Documents, workflows, Organizational hierarchies, Roles & Responsibilities (Draftsmen, Junior/Assist Design Engineer, Design Engineer, Project Manager etc  etc) and their authorizations.
    3. So with these things it is very easy to learn & work with SAP PLM, if you are currently working in non-sap or any functional domain, you can join any SAP implementation company as a Trainee or Fresher and get trained on SAP
    or there are many training institutes which train SAP even for 25-30K without certification. (You will get a fare idea about what SAP is )
    Even SAP PLM starts with PDM Objects like, Material Master, Document Managment System, Engineering Change Managment (Versioning/Revisioning for BOM, MM, DIR), Bill of Materials, Classification System (Classes, Characteristics, Object Dependencies etc) all this are PDM Objects in SAP.
    And there is Collaboration Projects, Collabortion Folders and CAD Integrations. etc these all together constitutes a SAP PLM
    For Certification on SAP PLM below mentioned are details. and follow the link as well
    https://websmp203.sap-ag.de/certification
    SAP Consultant Certification
    Solution Consultant PLM - Project Management with mySAP ERP 2005
    Software components: SAP ERP Central Component 6.0
    Certification exam is included in course TPLM22 and is also offered in separate certification events at many SAP locations.
    Certification ID (Booking code):
    C_TPLM22_05
    Certification duration: 3 hours
    Number of certification questions: 30
    Required certificates for participation in this certification test: None
    Consultant Academy courses for certification preparation: TPLM20 (Project Management I), TPLM22 (Project Management II (Case Study))
    Alternative Project Team Training courses for certification preparation:
    PLM
    200 (Project Management), PLM210 (Project Management - Structuring), PLM 220 (Project Management – Logistic), PLM230 (Project Management – Controlling), PLM240 (Project Management – Reporting)
    Please note that you are not allowed to use any reference materials during the certification test (no access to online documentation or to any SAP system).
    The certification test Solution Consultant PLM – Project Management with mySAP ERP 2005 verifies the knowledge in the area of the mySAP Product Lifecycle Management for the consultant profile Project Management. This certificate proves that the candidate has a basic understanding within this consultant profile, and can implement this knowledge practically in projects.
    The certification test consists of questions from the areas specified below:
    Topic Areas
    1. Project Structuring (+++)
    Basic data in PS: work breakdown structure, network and activities, milestones, PS texts, documents
    Project Builder and project planning board
    Project simulation
    Standard work breakdown structure, standard network
    Assembly processing
    2. Dates (+)
    Time scheduling and scheduling (network scheduling, project scheduling, overall network scheduling)
    Actual dates
    3. Resources (+)
    Work center
    Capacity planning and capacity evaluation
    Workforce planning to HR resource
    Confirmation and working time sheet
    Internet scenarios
    Workflows in PS
    4. Material (+)
    Work breakdown structure BOM
    BOM PS interface
    Component assignment in the network
    Material procurement through in-house production or external procurement
    Collective stock and project stock
    Requirements grouping
    Progress tracking
    ProMan
    Delivery from the project
    5. Costs and Budget (++)
    Cost planning in the work breakdown structure
    Network costing
    Assigning orders to the project
    Budgeting and availability control
    Commitment and actual costs through account assignment and order assignment
    6. Revenue and Payments (+)
    Revenue and payment planning in the project
    Sales pricing and quotation creation
    Resource-related billing
    Milestone billing and down payment processing
    7. Period-End Closing (+)
    Template allocation
    Application of overhead
    Interest calculation
    Progress analysis and Progress Analysis Workbench.
    Results analysis
    Incoming orders
    Settlement
    8 Miscellaneous (+)
    Exernal service and service activities
    Organizational units in SAP ERP
    Info systems in project management
    Field selection
    OpenPS
    Amount of questions by topic (as percentage of test):
    + = 1 - 10%
    ++ = 11 - 20%
    +++ = over 20%
    No responsibility is taken for the correctness of this information. Copyright © SAP AG 2006.
    Very Important:
    http://mysapbi.blogspot.com/2007/01/sap-help-in-pdf-files.html
    Regards
    Rehman
    Reward Points if Useful

  • E52 Advanced Communication Manager Lost!

    Hello Everyone
    Although I am a very very happy person with my E52, I had to reset my phone [using the *#7370# command] ](to refresh it after 2 yrs of continuous usage) and format my microsd (due to file corruption) in order to fix some problems I created on the phone.
    Everything is working excellent again , but I have completely lost the Advanced Communication Manager programme!
    From what I read it is built in the firmware so how can it be lost and how do I get it back?
    I have downloaded the programme from Nokia but it says it is limited version (???)
    Any ideas anyone
    Thank you all

    This resource confirms that Advanced Communication Manager was installed upon memory card in case of E52:http://melonmobile.com/CompanyMenu/News.aspx?news_id=43
    Did you download this version http://store.ovi.com/content/60614 rather than this one http://store.ovi.com/content/1353 ?
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • Advanced Communication Manager bug!

    Hi all,
    New day, new bugs. This time i found an irritating problem in Adv. Com. Mgr. version 1.00 (37) which is built-in my E55's latest firmware. The problem is, if you try to create a blacklist by adding numbers manually (not from contacts or logs), you WON'T be able to define same number with 'different' area codes.
    I mean, let's assume you defined a blacklist entry like this:
    Name: A1
    Number: +907851234567
    Action: Block
    ...choose 'option' and 'add' to append list with new entry like this:
    Name: A2
    Number: +905901234567
    Action: Block
    ...will result in a case that area (region) difference will be dismissed! A1 will be overwritten by A2 because main number '1234567' is the same though area codes are different(590 and 785)! That's not good!
    You can try to reproduce the same!
    Comments are appreciated.
    Thanks!

    This resource confirms that Advanced Communication Manager was installed upon memory card in case of E52:http://melonmobile.com/CompanyMenu/News.aspx?news_id=43
    Did you download this version http://store.ovi.com/content/60614 rather than this one http://store.ovi.com/content/1353 ?
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • Task and resource management - Task confirmation from supervisor

    Hello,
    we are implementing TRM. We would to like give to th supervisor the possibility to confirm task using monitor. This can be useful in case of downtime of mobile devices.
    Currently it's possibile to confirm from the alert monitor only the tasks with status force confirmation (status = 7). In this case from a WM pont of view the picking is already cofirmed and through monitor it's possibile to confirm the task and so the putaway from WM point view
    So we need to develop a functionality that confirm task indipendently from the TRM status and WM status..
    I found the function LTSK_TASK_CONFIRM but it seems that doesn't work.
    Have you any suggestions for the functionality or sample code to launch the function module LTSK_TASK_CONFIRM?
    i think it's very strange that SAP hasn't developed a method in order to confirm a task and then TO without using mobile device.
    Regards,
    Andrea

    Hi Andrea,
    Why don't you just use tcode LP00? You will log on to your device/resource element as if you are logging on to a scanner. This tcode then simulates the scanner screens on your SAP terminal and you can confirm all tasks as per correct scanning functionality.
    Cheers,
    Hein

  • Network resource wise confirmation

    Dear All
    Is it possible to confirm production on resource network? Such as I have a plant that contains three parallel resources producing same product. I want to create a single process order and enter Goods movement for individual work centers production.
    Please let me know if is it possible and how to do it?
    regards

    Goods movements are done for the order; there's no way to distinguish between the individual WCs. The only way would be to have the manufactured material batch managed and enter the WC info in the classification of the batch. Not recommended, if you have other options.

  • Change in resource in Confirmation

    Dear All,
                   Scenerion is at the time of Confirmation actual operation is done on diffrent resource that planned resource in Process order. If i confirm the process order using  the actual resource(A) which is diffrent from resourcer (B) in process order,  system is booking cost for the resource (b). I couldn ot getting correct cost .How can correct this.
                  And is this the right procedure?
    regards
    ACP

    I have oracle resource connected to IDM.
    The users are created directly on Oracle.
    These users already exist in IDM.
    When running the recon need to link them to IDM.
    the linking is fine, I need to also push the password in IDM to the oracle database.
    I used change password workflow
    <Variable name='accountId' input='true'>
    <Comments>&#xA; The name of the Lighthouse user to reprovision.&#xA; &#xA; </Comments>
    <ref>accountID</ref>
    </Variable>
    The schema map for IDM to oracle is. assountID - user_name

  • How to load the resource bundle message on confirmation popup

    hi every one
    i am using java script confirmation message on my delete button.
    this is my sample for that one
    <h:commandButton action="#{createCurrency.removeCurrency}"
             onclick="if (!confirm('Are you sure to delete this value?')) return false" value="#{messages.Delete}"/>    i need to load the "Are you sure to delete this value?" from resource bundle.
    is there any way to load above message from resource bundle.
    thiagu.m

    If you're using JSF 1.2, you can add the bundle config in your faces-config.xml file like this:
    <resource-bundle>
       <base-name>mypackage.i18n.MessageResources</base-name> // i18n is shorthand for internationalization
       <var>msg</var>
    </resource-bundle>     
    <locale-config>           
       <default-locale>en</default-locale>  // or whatever locale you preferred 
       <supported-locale>...</supported-locale> // other locale defined here if you need them
    </locale-config>Then create a property file called "MessageResources_en.properties. In this file, you can define something like:
    {code}
    MSG_CONFIRM=Do you wish to delete this value?
    // add other messages here. Syntax is: key=value
    {code}
    Then reference the bundle's message in your form as per normal:
    {code}
    !confirm(#{msg.MSG_CONFIRM}))
    {code}
    I haven't tried the above codes but it should help you get started.
    Edited by: icepax on 13/11/2009 19:44

  • The adobe CC purchase fails at Confirm Membership phase (getting: No 'Access-Control-Allow-Origin' header is present on the requested resource)

    I'm trying to purchase adobe CC and get this error (in my chrome console) -
    XMLHttpRequest cannot load http://shop.adobe.com/store?Action=QuickBuyCheckoutPlaceRequisition&Env=BASE&Locale=en_GB& SiteID=adbehil. No 'Access-Control-Allow-Origin' header is present on the requested resource. Origin 'https://shop.adobe.com' is therefore not allowed access.
    how can I purchase adobe cc?
    Thanks,
    Idan

    Please try a different browser, if you are in a company network then you can contact the IT department to get it checked.

  • MRS (Multi Resource Scheduling) - Show operation status in Planning Board

    Because the current MRS thread is some long and complicated I chose to move this question into a seperate thread:
    Initial question:
    Like many companies, it is not unusual at my customer for their Planners to create orders with multiple operations, particularly since many orders require different crafts to perform the work. When the Planning Board is launched and Planners lok at work scheduled for the past week they want to be able to see at a glance which operations have been completed and which operations, perhaps from the same order, have not and may need to be rescheduled. Their preference is to select "final confirmation" when using transaction IW41 and thereby set the operation system status to CNF when the work on an operation has been completed. They then want to somehow use this CNF operation status to drive something visual in the graphical Demand layout display and Resource layout display to enable the Planner to see at a glance that the operation has been completed. I've tried several approaches with configuration of abstract statuses and the user interface profile without success. My customer's interest in being able to see the completion status of an operation in the MRS Planning Board makes a lot of sense to me. I'm hoping someone can help me with a technique for modifying the Planning Board so that it displays the completion status of an operation in a visual way.
    Response from Varun Verma:
    Hi Mark,
    The problem at your customers end is nothing new.
    What you can do ( many other customers have done it in similar way ) is:
    1) you integrate the status CNF into MRS.
    Check the customizing: Basic Settings -> Assign ERP Objects -> Status
    2) configure in MRS that for status CNF, the assignments and demands (only in item work list or Hotlist) is colored to GREEN (or any other color)
    Check customizing: Set Up Scheduler Workplace -> Workplace Profiles -> Define User Interface Profiles
    Thus the users will know visually, that the green colored assignments are already completed.
    By the way, in your work list you can also filter the demands based on their status
    Regards
    Varun.
    Followup question:
    Varun,
    Thanks for the response.  I thought I had tried this but perhaps it's because in the UI profile I had not entered something in both the status groups for assignments and the status groups for demands.  I have a bit more testing to do but it appears that the demand status now gets updated from the operation status of PCNF (linked to abstract status WORK_START) and CNF (linked to abstract status WORK_STOP).  I also get a red bar (C4) for PCNF and a green bar (C1) for CNF.  Do you have a better status group I should be using in place of C1 and C4?  Status groups C1 and C4 give me a bar but it doesn't look like the demand bar with a outline and alphanumeric description of the demand, it's just a colored bar.
    I know the work list can be filtered based on their MRS "planning" status, however, it doesn't appear to permit filtering by the status of the operation unless I add the operation status as an additional field in the worklist.  Is there something I'm missing here?  And even if it did, my customer wants to be able to see the CNF status indication in the Demand layout and schedule using the work centers so the worklist is not being shown like it is in the Resource layout.
    Mark
    Edited by: Mark Scott on Aug 10, 2009 3:35 PM

    Hi Mark,
    Well I assumed that you have confirmations integration active !! But I guess not because you say that the status is not integrated always.
    What you need to do:
    1) I assume you have SP05 or later.
    2) Implement the user exit: CONFPM05. In the implementation of this exit you need to call FM: /MRSS/RSG_PM_ORDER_CONFIRM
    3) Go to customizing: Basic Settings --> Assign ERP Objects --> Status
      -- Here, define an abstract status (MRS Status) for confirmed and partially confirmed
      -- map it to R3 status CNF and PCNF.
    After this, whenever you enter confirmation for PM order from transaction IW41, the status will be integrated.
    Now you can use the MRS statuses defined in step 3 to configure the colors.
    Implementing the user exit CONFPM05 might require some technical input. But it is easy. Just a few double clicks and copy paste.
    Contact an ABAP developer for the same.
    This should solve your issue.
    Regards
    Varun

  • Problems rebooting: "couldn't lock for reboot: Resource busy"

    Hi there,
    I'm having trouble rebooting my Xserve G4. The server has been up for 128 days, and a previous admin had installed some software updates, and I recently applied several new ones including 'Java for Mac OS X 10.5 Update 5', QuickTime 7.6.6 and Safari 4.0.5.
    It appears it's been trying to reboot ever since the first set of updates, but is not able to. What is strange is that even after having applied the updates mentioned, Server Admin still lists these same software updates as new, uninstalled updates, and asks me to install them.
    Also, the CPU usage is running at around 60%, and diskarbitrationd and kextcache seem to be the main CPU hogs.
    I have tried asking the machine to reboot through Server Monitor, and it fails, stating:
    14/05/2010 10:32:42: Starting remote hardware monitoring for ‘laramie.gcal.ac.uk’
    14/05/2010 10:32:43: Server contacted successfully
    14/05/2010 10:32:43: Connection to server established
    14/05/2010 10:33:01: Restart request sent, waiting for confirmation…
    14/05/2010 10:33:01: Server restarting
    14/05/2010 10:33:12: Failed to contact server
    14/05/2010 10:38:46: Restart request sent, waiting for confirmation…
    14/05/2010 10:39:10: Server restarting
    14/05/2010 10:49:18: Configuration sent, waiting for confirmation…
    14/05/2010 10:49:19: Configuration sent, waiting for confirmation…
    14/05/2010 10:49:24: Configuration received by server and now active
    14/05/2010 10:49:24: Configuration received by server and now active
    But the server never actually reboots.
    I've also tried 'sudo reboot' at the shell, and this generates:
    laramie:~ swadmin$ sudo reboot
    reboot: / is busy updating; waiting for lock
    reboot: couldn't lock for reboot: Resource busy
    Here's what's in /var/log/system.log, on a continuous loop:
    May 14 11:04:36 laramie servermgrd[55638]: --Module servermgr_xserve's response has retain count of 1.
    May 14 11:04:37 laramie kextd[24]: 0x17ad40 exited without unlocking '/'
    May 14 11:04:37 laramie kextd[24]: / is still busy, delaying reboot
    May 14 11:04:38 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter[39316]): Exited with exit code: 1
    May 14 11:04:38 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter): Throttling respawn: Will start in 9 seconds
    May 14 11:04:40 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter): Throttling respawn: Will start in 7 seconds
    May 14 11:04:41 laramie kextd[24]: 0x17ad40 exited without unlocking '/'
    May 14 11:04:41 laramie kextd[24]: / is still busy, delaying reboot
    May 14 11:04:42 laramie com.apple.launchd[353] ([0x0-0x1540c3f7].com.apple.finder[39326]): Exited with exit code: 1
    May 14 11:04:44 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter): Throttling respawn: Will start in 3 seconds
    May 14 11:04:45 laramie kextd[24]: 0x17ad40 exited without unlocking '/'
    May 14 11:04:45 laramie kextd[24]: / is still busy, delaying reboot
    May 14 11:04:48 laramie servermgrd[55638]: --Module servermgr_xserve's response has retain count of 1.
    May 14 11:04:48 laramie kextd[24]: 0x17ad40 exited without unlocking '/'
    May 14 11:04:48 laramie kextd[24]: / is still busy, delaying reboot
    May 14 11:04:49 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter[39346]): Exited with exit code: 1
    May 14 11:04:49 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter): Throttling respawn: Will start in 8 seconds
    May 14 11:04:50 laramie com.apple.launchd[353] ([0x0-0x1540e3f9].com.apple.finder[39347]): Exited with exit code: 1
    May 14 11:04:51 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter): Throttling respawn: Will start in 7 seconds
    May 14 11:04:52 laramie kextd[24]: 0x17ad40 exited without unlocking '/'
    May 14 11:04:52 laramie kextd[24]: / is still busy, delaying reboot
    May 14 11:04:54 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter): Throttling respawn: Will start in 4 seconds
    May 14 11:04:55 laramie kextd[24]: 0x17ad40 exited without unlocking '/'
    May 14 11:04:55 laramie kextd[24]: / is still busy, delaying reboot
    May 14 11:04:57 laramie com.apple.launchd[353] ([0x0-0x154113fc].com.apple.finder[39370]): Exited with exit code: 1
    May 14 11:04:57 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter): Throttling respawn: Will start in 1 seconds
    May 14 11:04:58 laramie kextd[24]: 0x17ad40 exited without unlocking '/'
    May 14 11:04:58 laramie kextd[24]: / is still busy, delaying reboot
    May 14 11:04:59 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter[39378]): Exited with exit code: 1
    May 14 11:04:59 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter): Throttling respawn: Will start in 9 seconds
    May 14 11:05:00 laramie servermgrd[55638]: --Module servermgr_xserve's response has retain count of 1.
    May 14 11:05:00 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter): Throttling respawn: Will start in 8 seconds
    May 14 11:05:01 laramie kextd[24]: 0x17ad40 exited without unlocking '/'
    May 14 11:05:01 laramie kextd[24]: / is still busy, delaying reboot
    May 14 11:05:03 laramie com.apple.launchd[353] ([0x0-0x154143ff].com.apple.finder[39392]): Exited with exit code: 1
    May 14 11:05:04 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter): Throttling respawn: Will start in 4 seconds
    May 14 11:05:04 laramie kextd[24]: 0x17ad40 exited without unlocking '/'
    May 14 11:05:04 laramie kextd[24]: / is still busy, delaying reboot
    May 14 11:05:06 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter): Throttling respawn: Will start in 2 seconds
    May 14 11:05:07 laramie kextd[24]: 0x17ad40 exited without unlocking '/'
    May 14 11:05:07 laramie kextd[24]: / is still busy, delaying reboot
    May 14 11:05:10 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter[39413]): Exited with exit code: 1
    May 14 11:05:10 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter): Throttling respawn: Will start in 9 seconds
    May 14 11:05:10 laramie com.apple.launchd[353] ([0x0-0x15416401].com.apple.finder[39415]): Exited with exit code: 1
    May 14 11:05:10 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter): Throttling respawn: Will start in 8 seconds
    May 14 11:05:11 laramie kextd[24]: 0x17ad40 exited without unlocking '/'
    May 14 11:05:11 laramie kextd[24]: / is still busy, delaying reboot
    May 14 11:05:14 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter): Throttling respawn: Will start in 4 seconds
    May 14 11:05:15 laramie kextd[24]: 0x17ad40 exited without unlocking '/'
    May 14 11:05:15 laramie kextd[24]: / is still busy, delaying reboot
    May 14 11:05:17 laramie com.apple.launchd[353] ([0x0-0x15419404].com.apple.finder[39433]): Exited with exit code: 1
    May 14 11:05:18 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter): Throttling respawn: Will start in 1 seconds
    May 14 11:05:18 laramie kextd[24]: 0x17ad40 exited without unlocking '/'
    May 14 11:05:18 laramie kextd[24]: / is still busy, delaying reboot
    May 14 11:05:21 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter[39445]): Exited with exit code: 1
    May 14 11:05:21 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter): Throttling respawn: Will start in 9 seconds
    May 14 11:05:22: --- last message repeated 1 time ---
    May 14 11:05:22 laramie kextd[24]: 0x17ad40 exited without unlocking '/'
    May 14 11:05:22 laramie kextd[24]: / is still busy, delaying reboot
    May 14 11:05:24 laramie com.apple.launchd[353] ([0x0-0x1541c407].com.apple.finder[39454]): Exited with exit code: 1
    May 14 11:05:24 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter): Throttling respawn: Will start in 5 seconds
    May 14 11:05:25 laramie kextd[24]: 0x17ad40 exited without unlocking '/'
    May 14 11:05:25 laramie kextd[24]: / is still busy, delaying reboot
    May 14 11:05:27 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter): Throttling respawn: Will start in 3 seconds
    May 14 11:05:28 laramie kextd[24]: 0x17ad40 exited without unlocking '/'
    May 14 11:05:28 laramie kextd[24]: / is still busy, delaying reboot
    May 14 11:05:30 laramie com.apple.launchd[353] ([0x0-0x1541e409].com.apple.finder[39477]): Exited with exit code: 1
    May 14 11:05:31 laramie kextd[24]: 0x17ad40 exited without unlocking '/'
    May 14 11:05:31 laramie kextd[24]: / is still busy, delaying reboot
    May 14 11:05:31 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter[39480]): Exited with exit code: 1
    May 14 11:05:31 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter): Throttling respawn: Will start in 9 seconds
    May 14 11:05:33 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter): Throttling respawn: Will start in 7 seconds
    May 14 11:05:34 laramie kextd[24]: 0x17ad40 exited without unlocking '/'
    May 14 11:05:34 laramie kextd[24]: / is still busy, delaying reboot
    May 14 11:05:37 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter): Throttling respawn: Will start in 3 seconds
    May 14 11:05:37 laramie com.apple.launchd[353] ([0x0-0x1542140c].com.apple.finder[39498]): Exited with exit code: 1
    May 14 11:05:37 laramie kextd[24]: 0x17ad40 exited without unlocking '/'
    May 14 11:05:37 laramie kextd[24]: / is still busy, delaying reboot
    May 14 11:05:03 laramie com.apple.launchd[353] ([0x0-0x154143ff].com.apple.finder[39392]): Exited with exit code: 1
    May 14 11:05:04 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter): Throttling respawn: Will start in 4 seconds
    May 14 11:05:04 laramie kextd[24]: 0x17ad40 exited without unlocking '/'
    May 14 11:05:04 laramie kextd[24]: / is still busy, delaying reboot
    May 14 11:05:06 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter): Throttling respawn: Will start in 2 seconds
    May 14 11:05:07 laramie kextd[24]: 0x17ad40 exited without unlocking '/'
    May 14 11:05:07 laramie kextd[24]: / is still busy, delaying reboot
    May 14 11:05:10 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter[39413]): Exited with exit code: 1
    May 14 11:05:10 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter): Throttling respawn: Will start in 9 seconds
    May 14 11:05:10 laramie com.apple.launchd[353] ([0x0-0x15416401].com.apple.finder[39415]): Exited with exit code: 1
    May 14 11:05:10 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter): Throttling respawn: Will start in 8 seconds
    May 14 11:05:11 laramie kextd[24]: 0x17ad40 exited without unlocking '/'
    May 14 11:05:11 laramie kextd[24]: / is still busy, delaying reboot
    May 14 11:05:14 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter): Throttling respawn: Will start in 4 seconds
    Here's the output of 'kextstat':
    kextstat
    Index Refs Address Size Wired Name (Version) <Linked Against>
    1 1 0x0 0x0 0x0 com.apple.kernel (9.8.0)
    2 26 0x0 0x0 0x0 com.apple.kpi.bsd (9.8.0)
    3 3 0x0 0x0 0x0 com.apple.kpi.dsep (9.8.0)
    4 33 0x0 0x0 0x0 com.apple.kpi.iokit (9.8.0)
    5 35 0x0 0x0 0x0 com.apple.kpi.libkern (9.8.0)
    6 34 0x0 0x0 0x0 com.apple.kpi.mach (9.8.0)
    7 18 0x0 0x0 0x0 com.apple.kpi.unsupported (9.8.0)
    8 1 0x0 0x0 0x0 com.apple.iokit.IONVRAMFamily (9.8.0)
    9 1 0x0 0x0 0x0 com.apple.driver.AppleNMI (9.8.0)
    10 1 0x0 0x0 0x0 com.apple.iokit.IOSystemManagementFamily (9.8.0)
    11 1 0x0 0x0 0x0 com.apple.iokit.ApplePlatformFamily (9.8.0)
    12 29 0x0 0x0 0x0 com.apple.kernel.6.0 (7.9.9)
    13 1 0x0 0x0 0x0 com.apple.kernel.bsd (7.9.9)
    14 1 0x0 0x0 0x0 com.apple.kernel.iokit (7.9.9)
    15 1 0x0 0x0 0x0 com.apple.kernel.libkern (7.9.9)
    16 1 0x0 0x0 0x0 com.apple.kernel.mach (7.9.9)
    17 14 0x35594000 0x14000 0x13000 com.apple.iokit.IOPCIFamily (2.6) <7 6 5 4>
    18 4 0x355ae000 0x5000 0x4000 com.apple.driver.IOPlatformFunction (1.8.7d5) <12>
    19 0 0x355c5000 0x10000 0xf000 com.apple.driver.AppleMacRISC2PE (1.8.7d5) <18 17 12 7 5 4>
    20 0 0x35688000 0x6000 0x5000 com.apple.BootCache (30.4) <7 6 5 4 2>
    21 1 0x3578e000 0x4c000 0x4b000 com.apple.iokit.IOHIDFamily (1.5.5) <7 6 5 4 2>
    22 0 0x357e2000 0x4000 0x3000 com.apple.security.TMSafetyNet (3) <7 6 5 3 2>
    23 0 0x35806000 0xb000 0xa000 com.apple.nke.applicationfirewall (1.6.77) <7 6 5 4 2>
    24 0 0x35860000 0x1e000 0x1d000 com.apple.security.seatbelt (107.12) <7 6 5 3 2>
    25 0 0x3a2f0000 0x4000 0x3000 com.apple.driver.AppleFlashNVRAM (1.0.5) <12>
    27 0 0x3a376000 0xa000 0x9000 com.apple.driver.AppleMacRiscPCI (3.4.0) <17 12>
    28 0 0x3b39b000 0x8000 0x7000 com.apple.driver.AppleI2C (4.0.0d2) <12>
    29 0 0x3b3b3000 0x4000 0x3000 com.apple.driver.AppleCPUThermo (2.0.0a0) <12>
    30 0 0x3b44f000 0x6000 0x5000 com.apple.driver.AppleKiwiRoot (1.0.5f1) <17 12>
    31 2 0x3b673000 0x5b000 0x5a000 com.apple.iokit.IOFireWireFamily (3.4.9) <6 5 4 2>
    32 0 0x3b712000 0x2f000 0x2e000 com.apple.driver.AppleFWOHCI (3.9.7) <31 17 7 6 5 4 2>
    33 1 0x3b7e3000 0x5000 0x4000 com.apple.iokit.IOKeyLargo (1.7.2f1) <12>
    34 0 0x3b7fc000 0x7000 0x6000 com.apple.driver.AppleKeyLargo (1.7.2f1) <33 18 17 12>
    35 3 0x3b966000 0x37000 0x36000 com.apple.iokit.IOUSBFamily (3.4.9) <7 6 5 4 2>
    36 0 0x3ba59000 0xe000 0xd000 com.apple.driver.AppleUSBOHCI (3.4.6) <35 17 6 5 4>
    37 0 0x3ba76000 0x3000 0x2000 com.apple.driver.AppleBlower (2.0.0) <12>
    38 0 0x3ba87000 0x4000 0x3000 com.apple.driver.MacIOGPIO (1.3.0d0) <12>
    39 0 0x3ba9c000 0x5000 0x4000 com.apple.driver.I2CGPIO (1.3.0d0) <12>
    40 2 0x3bb84000 0x22000 0x21000 com.apple.iokit.IOSCSIArchitectureModelFamily (2.1.1) <6 5 4 2>
    41 1 0x3bbb7000 0xc000 0xb000 com.apple.iokit.IOSCSIParallelFamily (1.5.2) <40 6 5 4 2>
    42 0 0x3bbfb000 0x18000 0x17000 com.apple.driver.AppleLSIFusionMPT (2.0.3) <41 17 6 5 4 2>
    43 0 0x3bc27000 0x3000 0x2000 com.apple.driver.AppleKeyswitch (1.0.4d1) <12>
    44 0 0x3bc86000 0x4000 0x3000 com.apple.driver.AppleMPIC (1.5.3) <17 12>
    45 2 0x3bd0e000 0x12000 0x11000 com.apple.iokit.IOATAFamily (2.0.1) <6 5 4 2>
    48 0 0x3bd4e000 0x4000 0x3000 com.apple.driver.AppleVIA (1.5.1d1) <12>
    49 0 0x3bd6a000 0x4000 0x3000 com.apple.driver.AppleGPIO (1.3.0d0) <18 12>
    50 0 0x3be74000 0x16000 0x15000 com.apple.driver.ApplePMU (2.5.6d2) <21 12 7 6 5 4>
    51 0 0x3bee6000 0x3000 0x2000 com.apple.iokit.IOUSBUserClient (3.4.9) <35 6 5 4>
    52 0 0x3bf9b000 0x10000 0xf000 com.apple.driver.AppleUSBHub (3.4.9) <35 6 5 4>
    53 0 0x3c029000 0x4000 0x3000 com.apple.driver.AppleKiwiATA (1.0.2f1) <45 17 12>
    55 5 0x3c13f000 0x21000 0x20000 com.apple.iokit.IOStorageFamily (1.5.6) <7 6 5 4 2>
    56 0 0x3c19c000 0x13000 0x12000 com.apple.iokit.IOATABlockStorage (2.0.6) <55 45 6 5 4 2>
    58 0 0x3c2f5000 0x6000 0x5000 com.apple.driver.XsanFilter (2.7.91) <55 12>
    60 0 0x3c4f4000 0x24000 0x23000 com.apple.driver.AppleRAID (3.0.19) <55 6 5 4>
    61 2 0x356c5000 0x26000 0x25000 com.apple.iokit.IOGraphicsFamily (1.7.3) <17 7 6 5 4>
    62 1 0x356eb000 0x18000 0x17000 com.apple.iokit.IONDRVSupport (1.7.3) <61 17 7 6 5 4>
    63 0 0x3567d000 0x3000 0x2000 com.apple.driver.AppleI2S (1.0.1f1) <12>
    64 1 0x35703000 0xc000 0xb000 com.apple.iokit.IOSerialFamily (9.4) <7 6 5 4 2>
    65 0 0x3570f000 0x9000 0x8000 com.apple.driver.AppleRS574Serial (1.3b7) <64 12>
    66 0 0x35718000 0x4000 0x3000 com.apple.driver.AppleLED (2.0.0a2) <12>
    67 0 0x3571c000 0x4000 0x3000 com.apple.driver.AppleLM87 (2.0.0) <12>
    69 0 0x357e6000 0xf000 0xe000 com.apple.driver.AppleVSP (2.2.2) <12>
    70 3 0x35811000 0x1f000 0x1e000 com.apple.iokit.IONetworkingFamily (1.6.1) <7 6 5 4 2>
    71 0 0x35830000 0xb000 0xa000 com.apple.iokit.IOFireWireIP (1.7.7) <70 31 6 5 4 2>
    72 1 0x35723000 0x4000 0x3000 com.apple.kext.OSvKernDSPLib (1.1) <6 5>
    73 2 0x3b49d000 0x20000 0x1f000 com.apple.iokit.IOAudioFamily (1.6.9fc5) <72 6 5 4 2>
    74 0 0x35727000 0x5000 0x4000 com.apple.driver.VirtualAudioDriver (2.5.8f1) <73 12>
    79 0 0x3b4bd000 0x17000 0x16000 com.apple.iokit.AppleBCM5701Ethernet (2.2.3b1) <70 17 6 5 4 2>
    80 0 0x3b3f5000 0xb000 0xa000 com.apple.iokit.AppleGMACEthernet (1.5.9f1) <70 17 6 5 4 2>
    82 0 0x3a2f8000 0x3000 0x2000 com.apple.driver.AppleFPButton (1.0.5a1) <12>
    83 0 0x3a31a000 0x3000 0x2000 com.apple.driver.AppleHWClock (1.5.2d0) <18 12>
    84 0 0x3b4df000 0x44000 0x43000 com.apple.ATIRadeon (5.4.8) <62 61 17 12 4 2>
    86 0 0x3b400000 0x5000 0x4000 com.apple.driver.AudioIPCDriver (1.0.6) <73 6 5 4 2>
    90 0 0x3b57b000 0x16000 0x15000 com.apple.driver.DiskImages (199) <55 7 6 5 4 2>
    91 0 0x3bd9a000 0xd000 0xc000 com.apple.filesystems.autofs (2.0.2) <7 6 5 4 2>
    92 1 0x22c9d000 0xe000 0xe000 com.apple.driver.ndrv.ATY,BlueStar.0x22ca6248 (1.0.0f251)
    93 0 0x3b555000 0x1b000 0x1a000 com.apple.iokit.IOSCSIBlockCommandsDevice (2.1.1) <55 40 6 5 4 2>
    I'd be grateful for any help or advice in clari
    Message was edited by: gregariousfruit

    I got sick of the error so hard-rebooted the server manually. Seems to be fine now, and software updates work as normal.

  • Schedule lines - Confirmed quantity issue

    Hi
    I have a make to order material which is purchased from a vendor. A purchase requistion is automatically created every time it is quoted in a sales order.
    In a particular case, I had 1 such material which was not in inventory and  which could be used while delivering a particular sales order. I posted goods reciept using movement type 501 - E and received it as a part of sales order stock.
    Now when I go to the schedule lines screen in the sales order, it shows confirmed quantity as '0' (See screen shot below) and therefore I am not able to deliver this sales order.
    [http://i41.tinypic.com/wwgjt4.jpg]
    Availability check is configured as in the following screen shot
    [http://i44.tinypic.com/290swwg.jpg]
    How can I get a confirmed quantity of 1 in the schedule line. Why is not SAP recognizing 1 in sales order stock?
    Please help me with this issue.
    Regards,
    Ketan

    Ketan,
    The config is acceptable. 
    SAP generally does not let you enter confirmation quantities manually.
    This issue is that you have said you have RELEVANT (sales order relevant) stock on hand, and you cannot get a confirmation.
    Now you are saying when you do the ATP check, it does 'nothing'. I am going to assume that you have already checked that the item of the sales order is not rejected.
    Normally, during an ATP check, you should have gotten a proposal screen, which will show that 0 or more pieces are available for confirmation.  If only zero is available, the system only will give you an icon on this proposal screen which says 'Continue'.  You still should get this screen! Since you haven't gotten this screen, There is probably one of three things wrong.  Either you have something missing in ATP config, or you have an authorization issue, or you have a userexit that is interfering with the ATP check.
    SD ATP settings and config is not simple, and neither is debugging a userexit.  This is not an MM issue, this is SD.  Consult with your SD team to determine your next step.  Or, if you have no SD resource, you should probably repost this message on an SD forum.
    Regards,
    DB49

  • Deploying Office 2003/2007/2010/2013 with App-V Resources and Solutions

    Please do not respond to this thread with sequencing issues - please start a new thread.
    The following articles and resources are available for virtualizing various versions of Office with App-V 4.6 and 5.0:
    Microsoft Guidance
    Important: Supported scenarios for deploying Microsoft Office as a sequenced App-V Package
    Prescriptive Guidance for Sequencing Office 2010 in App-V 4.6 SP1
    Prescriptive guidance for sequencing Office 2010 in Microsoft App-V
    Known issues and limitations when using virtualized Office 2010 applications on App-V 4.6 and App-V 4.5 SP2 clients
    Deploy Office 2010 by using Microsoft Application Virtualization
    How to use System Center Configuration Manager 2007 to confirm that the Microsoft Office 2010 Deployment Kit for App-V is installed
    Everything You Need to Know for a Successful Microsoft Office 2013 App-V Deployment
    Microsoft Resources
    Microsoft Office 2010 Deployment Kit for App-V
    Microsoft Application Virtualization 4.5 Service Pack 2
    Microsoft Application Virtualization 4.6 Service Pack 1
    Building a Technical Proof of Concept for the Joint Deployment of Windows 7 and Microsoft Office 2010
    App-V Package Accelerator for Microsoft Office Professional Plus 2010 -Windows 7
    App-V Package Accelerator for Microsoft Office Professional Plus 2010 (Windows XP)
    App-V Package Accelerator for Microsoft Project Professional 2010 (Windows 7)
    App-V Package Accelerator for Microsoft Project Professional 2010 (Windows XP)
    Microsoft Official Blogs
    Sequencing Office 2010 for App-V - Part 1: Considerations
    Sequencing Office 2010 for App-V, Part 2 – Preparing the Sequencing Workstation
    Sequencing Office 2010 for App-V, Part 3 – The Actual Sequencing Part
    Sequencing Office 2010 for App-V, Part 4 – Getting it to your users
    Solution: Possible Side-by-Side error when sequencing Office 2010 on Windows Vista
    When to sequence Office 2010 from scratch and when to use the Package Accelerator
    App-V MVP Resources
    White paper - The Definitive Guide to Delivering Microsoft Office with App-V
    softgridblog.com: Microsoft Office 2010, more integration in App-V 4.6
    Delivering Office with App-V – Sequencer Recommendations & Best Practices
    Threads with solutions:
    Cannot Open Office Documents from SharePoint with virtualized Office 2010
    KMS Key problem sequencing Office 2010
    Office 2010 Adding Additional Proxies
    Outlook 2010 Virtual Search Issues
    Office 2010 Searching
    Office 2010 Excel Documents will not open from Explorer
    sequencing project 2010 successfull, but features (icons) missing / greyed out
    Technet License Key problem with Microsoft Office 2010 Deployment Kit for App-V
    Outlook mailto FTA
    Sequencing Office 2010 x32 on App-V 4.6 x64

    Don't forget these helpful lists either!!! :)
    http://blogs.technet.com/b/gladiatormsft/archive/2013/01/26/must-have-app-v5-0-migration-resources.aspx
    http://blogs.technet.com/b/gladiatormsft/archive/2013/02/02/office-2013-deployment-and-migration-resources.aspx
    Steve Thomas, Senior Consultant, Microsoft
    App-V/MED-V/SCVMM/Server App-V/MDOP/AppCompat
    http://blogs.technet.com/gladiatormsft/
    The App-V Team blog: http://blogs.technet.com/appv/
    The MED-V Team Blog: http://blogs.technet.com/medv
    The SCVMM Team blog: http://blogs.technet.com/scvmm/
    “This posting is provided "AS IS" with no warranties, and confers no rights. User assumes all risks.”

  • Resource Center - Need to change a Local Resource to an Enterprise Resource

    The Resource Record for a resource was accidently deleted.  This resource was still assigned to active project tasks at the time of the delete.  A new Resource Record was created but it has the resource as a Local Resource.  How can I move
    this resource back to the Enterprise Resource Pool?
    As a Local Resource the Assignment Owner field on his assigned tasks are not populating, so he cannot see any tasks on his timesheets.  Also, the resource cannot be assigned to any new project tasks because he cannot be added to the Project Enterprise
    Pool.
    Attempted to remove the Resource Record that was created using Delete Enterprise Objects -> Resources and Users but since the resource is Local and not Enterprise his record is not showing to select it for delete.
    Would the Admin Restore->Enterprise Resource Pool and Calendars functionality put his original record back in place?  I understand only one version of this backup is kept but that should be the version we currently have.  What data might be
    lost using this functionality?  Any chance other users would be adversely impacted?
    We are using Project Pro 2010

    Hi Dennykat,
    As mentionned in your previous post, restoring the resource pool should work, since it is restoring resources with their metadata and with the exact same UID. Thus the deleted and restored enterprise resource should have everything back (assignments, timesheets...).
    Since I never tested such as process, I strongly advice to test it in the dev environment on a simple test case.
    I remember that if also adviced you to recreate the enterprise resource and type in the resource sheet on one of the resource's project the exact enterprise resource name (exact same syntax), so Project should ask you when saving if you want to replace the
    local resource by the enterprise one. Can you confirm that it didn't work?
    Hope this helps.
    Guillaume Rouyre - MBA, MCP, MCTS

Maybe you are looking for

  • WORD doc missing text from yesterday and goes missing on backup drive

    Another mystery from the WORD kingdom. I just opened the WORD doc I work on each day (it's a blog) and noticed that last night's entry is completely GONE. I do saves as I go along and know that when I put it to bed for the night it was intact. So, I

  • Queue Block : Action OPEN_PSA_DATAPACKAGE/2 IS NOT SUPPORTED

    I am getting EDI data from XI system to my BI. These days, I am seeing many entires getting stuck in SMQ2. On checking, the first line always has SYSFAIL error. and the statusText shows as Action OPEN_PSA_DATAPACKAGE/2 is not supported in RED color.

  • File Adapter Question in SOA 11g

    Hello, just started with this soa stuff and looks like it can be very useful, i have a question: i am doing a SyncRead within a bpel process and want the file is not necessarily there as soon as that process runs, so if it doesnt find it i want it to

  • Cracked Screen & Earphone part doesnt work

    I dont know what to do, I'm in Canada and one day at work I dropped my phone and totally messed the screen up, the touch screen still works, but the screen is cracked to ****. What do I need to do to fix this? and as you will kinda be able to see is

  • IChat options are all completely greyed out

    iChat, for whatever reason, is totally and completely greyed out.  The only menu options I can choose are "Show Fonts," "Show Colors," and "Spelling and Grammar" - every other option or sub-option is greyed out.  iChat is completely unusable.  I trie