Secret key for the OpenPGP?????

What am I getting the message "enter passphrase to unlock the secret key for the OpenPGP certificate:..." when I try to send email via AOL on my Mac? My gmail account is fine. I can't send email via my AOL account from my computer any longer because it is requiring a passphrase which I do not have nor ever set up. My gmail account is fine. Help!

Uninstall GPGTools by following the developer's instructions.
How can I uninstall your software? / FAQ / Knowledge Base - GPGTools Support

Similar Messages

How to find out what is the lock key for the computer

How to find out what is the lock key for the computer?

You don't.
If you forgot or lost the password, all you can practically do is reset it.
The manner in which you do so depends on what version of OS X you are running. The older versions utilize the reset password utility on your recovery/re-installation disk/drive.
On Lion, you use the following technique to reset the Administrators password:
Boot to your Lion Recovery Partition, by holding down the Option key while starting, and then selecting the Recovery HD as the boot choice.
Once booted, at the top of the screen is a menu ..., select Utilities / Terminal from the menu bar.
In the Terminal window, type “resetpassword” (without the quotes) and press return. A “Reset Password” window will open. Select your boot volume (your SSD drive) if it is not already selected. Select your administrators username from the menu labeled “Select the user account” if it is not already selected. Follow the prompts to reset the password. Restart the computer from the apple menu.

To set the short cut key for the menu when using CommandDesign pattern

Hi All
I have a menu File which has two menu items Load and save.
Here for implementing the actionperformed iam using the command design pattern.
Now iam not able to set the short cut key for the menu item......
Please help me..............
Thanks
Arch

The Java Tutorials: [How to Use Menus|http://java.sun.com/docs/books/tutorial/uiswing/components/menu.html]
db

I have a new mac and want my old photoshop on it , how get i the old serial key for the new ?

I have a new mac and want my old photoshop on it , how get i the old serial key for the new ? My old mac is deleted ...

We would need to know the version of Mac OS you are running and the version of Photoshop you want to install.
The serial number is the tricky part. If you have no idea where you placed it and did not register your product with Adobe, your chances are very low of retrieving it.

I have logic pro studio 8 and the upgrade, however it will not upload on my mac book pro. It says i need a product key for the logic 9 and it come with one.

I have logic pro studio 8 and the upgrade (logic pro 9) and it will not load up to my new mac book pro. Its asking for a product key for the logic pro 9 upgrade and there wasn't one in the box. i need some help

Contact AppleCare... Explain you are a Logic User and you should be transfered to a Product Specialist to assist you with your Issue.

Keys for the Standard Messages

In the tutorials we find the example to Customizing a Standard Validator Message, and we can see a table of Keys for the Standard Messages, my question is, where can i find a table with all messages displayed including the Message Alert?, especifically one like this:
System Messages
Error Invalid cursor position

rename defaulttheme.jar > defaulttheme.zip
copy messages.properties file to a directory
copy and rename this file eg: messages_hu_HU.properties
after that you can open and edit this files in Creator
finaly copy back this files to the defaulttheme.zip and rename > defaulttheme.jar

How to generate keys for the records

Hi Gurus,
can anybody explain me how to create keys for the recors while working with keymapping.
Regards
Ravikumar

Hi Yugandher,
Is your Question pertaining to Key generation in MDM or using the Remote key for importing and syndication in MDM?
Remote Keys are system specific uniques maintained in MDM while importing source records from different source system.You need to Enable key mapping in Console and then map the <Remote key> field to the unique key in Import manager and do similar mapping in syndicator as well.
You can view the key mapping for differnt records under the Edit key mapping (context menu) right clicking on any record.
To know more on this refer the below link:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7051c376-f939-2b10-7da1-c4f8f9eecc8c (Key mapping)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30843106-5539-2b10-75a9-da483911b0d9 (Key mapping)
For Key generation in MDM you can use the Qualified range property of Remote system in Console for Key genearation.However these keys will be genearted only after syndication and are created and assigned within MDM and not maintained from any source remote system.
Hope It Helped
Thanks & Regards
Simona Pinto

I'm trying to download what's app chatting application and the massage given (need your secret answers for the below questions to proceed your purchase request ) but the problem is I forgot my answers :((( how can I reset the questions and the answer ????

I'm trying to download what's app chatting application and the massage given (need your secret answers for the below questions to proceed your purchase request ) but the problem is I forgot my answers :((( how can I reset the questions and the answer ????

Visit this site: http://support.apple.com/kb/HT5312

I need a domain key for the icrop app. Any ideas on how to find this?

I need a domain key for the icrop app. Any ideas on how to find this?

Can you open the Preview program without loading a file, like by itself?
If it doesn't load then I suspect a corrupt Preview preference file.
Deleting the System Preference or other .plist file
Can you open other files with Preview, like jpg's and images?
How about other PDFs? or is it just that one you have downloaded?
Run through this list of fixes
Step by Step to fix your Mac

HT201272 Where do I get the serial number and product key for the version of AutoCAD LT for Mac that I bought from the ITunes store?

Where do I get the serial number and product key for the version of AutoCAD LT for Mac that I bought from the ITunes store?

The iTunes Store doesn't sell software for the Mac. I presume you mean the Mac App Store. To the best of my knowledge, no software sold in the Mac App Store has serial numbers nor product keys. For what reason do you think you need them?
Regards.

The 'c' XUSER key for the DBM user does not exist or could not be identified

Hello members,
I am getting this message 'The 'c' XUSER key for the DBM user does not exist or could not be identified' in SUM preparation phase while upgrading SOLMAN from 7.01 to 7.1
Does anyone has any idea on this. What steps need to be followed for this.
My DB is MaxDB.
Thanks,
Srikanth

Hello,
Figured out the problem. Actually SAP System was moved from actual server to Virtual machine on the server. In this process some of the DB configuration got corrupted. And this activity was done by one of our previous employee.
Since this was a standalone system, I took backup of all current configuration and uninstalled SAP and installed new Solman 7.1 SPS12. Issue is resolved now.
Best Regards,
Srikanth
Solman Upgrade from 7.01 to 7.1 stuck in Extraction-PREP_EXTRACT/BEGIN_PRE phase

Invalid Layout Key for the specified Integrator

I have created a new Integrator, designed the layout and created a form function. Whe I click on the form function from the responsibility, I am getting the below error.
20009: <layout key> is invalid Layout Key for the specified Integrator
Please help me resolving this error.

Please see if (Creating Lines Using BEE Spreadsheet Interface Errors With '801:PAY_BATCH_LINES_CRT is an invalid Layout Key for the specified Integrator' [ID 1176075.1]) is applicable.
Thanks,
Hussein

How to save secret key in the NSS certDB and then retrieve it through Java?

Hi,
I 'm pretty new trying to handle keying material for NSS fips mode.
After following the guidelines from http://java.sun.com/javase/6/docs/technotes/guides/security/p11guide.html#NSS I need my code to use SecretKeyFactory method generateSecret with DESedeKeySpec parameter in the following way:
Provider nss = new sun.security.pkcs11.SunPKCS11(configFileName);
Security.addProvider(nss);
SecretKeyFactory keyFactory = SecretKeyFactory.getInstance("DESede", nss);
DESedeKeySpec keySpec = new DESedeKeySpec(new String("abcdefghijklmnopqrstuvw").getBytes("UTF-8"));
SecretKey key = keyFactory.generateSecret(keySpec);
The question is: what are the steps needed to save secret key "abcdefghijklmnopqrstuvw" in NSS certDB in the fips mode (nssModule = fips in pkcs#11 conf. file) and how should it be retrieved in the Java code?
Any help will be appreciated...

OK...I didn't test this in FIPS mode, but it works in keystore mode (which says persistent storage of keys)
KeyGenerator kg = KeyGenerator.getInstance("DESede",nss);
kg.init(192); //yields 168-bit key
SecretKey tripleDesKey = kg.generateKey();
KeyStore.SecretKeyEntry skEntry = new KeyStore.SecretKeyEntry(tripleDesKey);
ks.setEntry(randAlias, skEntry, new KeyStore.PasswordProtection(password));I was generating some random bytes and base64'ing them to get a random alias on each execution of the program. I'd also loop through and print out the aliases before I generated another key to ensure it was storing the key in between runs which it was.
Command-line proof the keys are in db:
symkeyutil -L -d .
Enter Password or Pin for "NSS Certificate DB":
     Name            Len Strength     Type    Data
NSS Certificate DB:
7i/XoKcaLhU=          24    168         des3 <restricted>
Yzjt7W+AIgc=          24    168         des3 <restricted>
RkOTZssCEQM=          24    168         des3 <restricted>
S2BHRcFUyAA=          24    168         des3 <restricted>
secretKeyAlias        24    168         des3 <restricted>
R/DaVy1z1MM=          24    168         des3 <restricted>
IdpdnIDzOYs=          24    168         des3 <restricted>
SeVASW8PrOc=          24    168         des3 <restricted>
c6Ml/9I7thQ=          24    168         des3 <restricted>Edited by: dstutz on May 15, 2008 12:28 PM
Edit again:
I changed the mode in the cfg file to fips and used modutil to change module to fips mode and it still works...all the keys I created in keystore mode are still there and I can add new ones.
C:\nss>symkeyutil -L -d .
Enter Password or Pin for "NSS FIPS 140-2 Certificate DB":
     Name            Len Strength     Type    Data
NSS FIPS 140-2 Certificate DB:
LmsZDBaaCw8=          24    168         des3 <restricted>
EQaX3wdJ1cY=          24    168         des3 <restricted>
7i/XoKcaLhU=          24    168         des3 <restricted>
Yzjt7W+AIgc=          24    168         des3 <restricted>
RkOTZssCEQM=          24    168         des3 <restricted>
S2BHRcFUyAA=          24    168         des3 <restricted>
secretKeyAlias        24    168         des3 <restricted>
UsY23mwSzEM=          24    168         des3 <restricted>
B/auMw2OTvE=          24    168         des3 <restricted>
coqyCAAJpsk=          24    168         des3 <restricted>
vVBHLg1r3cY=          24    168         des3 <restricted>
R/DaVy1z1MM=          24    168         des3 <restricted>
IdpdnIDzOYs=          24    168         des3 <restricted>
SeVASW8PrOc=          24    168         des3 <restricted>
c6Ml/9I7thQ=          24    168         des3 <restricted>Edited by: dstutz on May 15, 2008 12:56 PM

How to create a foreign key for the table from two different tables?

Hi All,
I have a three table like below. In the below table SAMPLE_CONS_CHECK and SAMPLE_CONS2_CHECK will be having the primary key for NAME column. The same SAMPLE_CONS3_CHECK table also having the primary key for NAME column and forieign key for SAMPLE_CONS_CHECK and SAMPLE_CONS2_CHECK tables. See the below code 2
code 1:
CREATE TABLE SAMPLE_CONS_CHECK
        (NAME VARCHAR2(10),
        SERIES VARCHAR2(5)
CREATE TABLE SAMPLE_CONS2_CHECK
        (NAME VARCHAR2(5),
         MODEL NUMBER
CREATE TABLE SAMPLE_CONS3_CHECK
        (NAME VARCHAR2(5),
         MODEL_NO NUMBER
        )code 2
alter table SAMPLE_CONS_CHECK
add constraint SAMPLE_CONS_CHECK_pk primary key (NAME)
alter table SAMPLE_CONS2_CHECK
add constraint SAMPLE_CONS2_CHECK_pk primary key (NAME)
alter table SAMPLE_CONS3_CHECK
add constraint SAMPLE_CONS3_CHECK_pk primary key (NAME)
ALTER TABLE SAMPLE_CONS3_CHECK ADD
CONSTRAINT SAMPLE_CONS3_CHECK_FK1 FOREIGN KEY
     NAME
) REFERENCES SAMPLE_CONS_CHECK
    NAME
) ON DELETE CASCADE;
ALTER TABLE SAMPLE_CONS3_CHECK ADD
CONSTRAINT SAMPLE_CONS3_CHECK_FK2 FOREIGN KEY
     NAME
) REFERENCES SAMPLE_CONS2_CHECK
    NAME
) ON DELETE CASCADE;From the above schenario i am able to insert the data to SAMPLE_CONS3_CHECK table. But the parent data is already available in the parent table. The problem is here two different constarints from two different tables. While inserting, it is checking from both the tables whether the parent is exist or not.
How can i solve this problem? Can anyone halp me about this?
Thanks
Edited by: orasuriya on Aug 8, 2009 2:02 AM

Actually the design is completely incorrect.
What you say is
I have
'foo', 'foo series'
'foo','foo model'
'foo',666
By virtue of table3 referring to both table1 and table2.
This means you actually need to have 1 (one) table:
'foo','foo series','foo model', 666
And the 'problem' disappears.
Sybrand Bakker
Senior Oracle DBA

Ip sla operations with different keys for the same destination

Hi all,
the customer wants to use different ip sla operations for the same destination (ip sla responder). From the first source router he uses key key1 and from the second source router he uses key key2. The ip sla responder responds only for the first router which uses the key key1.:-( Is it a normal behaviour? Can I use different keys for different ip sla operations for the same ip sla responder?
See the configuration on the responder:
key chain test
key 1
key-string 7 *key1*
key 2
key-string 7 *key2*
ip sla key-chain test
ip sla responder
He tried to use ip sla responders on:
Ciscu 2911
Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.2(4)M3, RELEASE SOFTWARE (fc2)
Cisco 881
Cisco IOS Software, C880 Software (C880DATA-UNIVERSALK9-M), Version 15.1(4)M4, RELEASE SOFTWARE (fc1)
Thank you.
Roman

Thomas,
Have a look at:
http://www.cisco.com/en/US/docs/ios-xml/ios/sec_conn_dmvpn/configuration/15-2mt/sec-conn-dmvpn-share-ipsec-w-tun-protect.html#GUID-2B448241-FD10-4F3B-BFF8-DFD44982D235
If you're using one tunnel source you need to use one ipsec profile, unless you're running (a) p2p tunnel which you're not in this case.
While you MAY have some luck with sharing/unsharing among different interface I'm afarid it will not be ever mentioned as supported.
The situation will change with upcomfing 3.10 and 3.11 IOS XE releases (and corresponding IOS releases).
M.

Secret key for the OpenPGP?????

Similar Messages

Maybe you are looking for