Section header with portrait and landscape view

My iBook project is being created so that it is available in both portrait and landscape view. This has been a tricky process since alot of content was distored when I created the layout using landscape and then attempted to adjust the portrait view after that. Currently, after many adjustments, I am attempting to remove the small "section number header" throughout the book at the very top of each chapter header in portrait mode. I was able to remove the the section number from the landscape mode, but can't seem to figure out how to do so with portrait mode (or if it is even possible?)
Help and suggestions are greatly appreciated.

Remember....layout in landscape - edit content in portrait.
Did you try to select the section number header in the style drawer and remove it from the master layout?

Similar Messages

PDF with portrait and landscape pages

I have a pdf with following composition:
- first page include a dynamic table where users can click a button to add rows (portrait orientation)
- second page include static content (portrait orientation)
- third page include static content (landscape orientation)
- fourth page include static content (portrait orientation)
The problem is that when the table grows, the second page takes the landscape orientation,
the third page takes the portrait orientation...
It's possible keep the settings defined for that all pages generated from dynamic table takes
portrait orientation, and the next page (initially the third page) keeps the landscape orientation.
Thanks in advance.

Don't works correctly.
Attached a pdf test.
https://www.yousendit.com/directDownload?phi_action=app/directDownload&fl=SWhZekZuTkFuSlR2 WnBSYTA4bnVnVE9yVEh2Z0g0R2oxeStBYWNnMnpwZDBFT0FjRlZrSW9acXREaGJNUWRGeC95VVhBWnlVQndJaks5d3 JPb3F4VXprMEhnb2hUbFlaMFlDWmNBPT0&experience=bas
Thanks!!

HT201412 My ipad does not turn off...i tried pressing the Sleep/Wake button and Home button for 10 secs but no response. Also, the screen is not rotating on portrait or landscape view...any suggestions?

My ipad does not turn off...i tried pressing the slep/wake button and home button for more than 10 secs but nothing hapened. Also, the screen is not rotating on portrait and landscape views...

While this could potentially be a hardwar issue:
Try a rest: Simultaneously hold down the Home and On buttons until the iPad shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the iPad back on using the On button. In some cases it also helps to double click the Home button and close all apps from the tray before doing the reset.
If the reset doesn't work, you may need to consider restoring the iPad to factory settings

How do I adjust the page orientation in Pages? I want to keep the pages above the section break as portrait, and the ones below I want to change into landscape. Is this possible? I can only get it to be one or the other but not both.

I want to keep the pages above the section break as portrait, and the ones below I want to change into landscape. Is this possible? I can only get it to be one or the other but not both.

The work around is to do two documents, one in portrait format and one in landscape format. When finished export to Pdf. open in Preview by select both files and use Cmd + O or doubleclick. You can now in Previews thumbnail column the pages from one document into the other and then save.
If you have created only one with i.e. all pages in portrait format but with the content for the landscape pages rotated on the pages, you can rotate the pages in Preview. Two ways to get the same result.

Word 2007 mail merge : problem with mixed portrait and landscape orientations

Hi there,
I have a 3 pages document Word 2007 file
This is a mail merge I want to export in PDF using Adobe Acrobat Printer,
then send "big" PDF to printing.
page 1 is PORTRAIT
page 2 is PORTRAIT
page 3 is LANDSCAPE
In PDF pages 1 and 2 are perfectly fine, inside an A4 format (width=210 height=297mm or something)
but for page 3, system changed to a "double" sized page (A3 width=297 height=420) and printed my stuff at the 1st top middle of big page.
So I have a big "double" sheet, oriented PORTRAIT, with my stuff in 1st half, and a blank in 2nd half.
It seems that system did not rotate the page... and just put the stuff into a bigger sheet to "solve" at best.
I would like the same size of paper (A4) but in landscape : width=297 height=210
I have already seen many PDF with mixed portrait and landscape orientations, so what's the thing ?
With my advanced thanks,
And greetings from Paris, France !
Vince

Some questions:
Which version of office were you using before? 2003?
Are the data files on a network, or on your local machine? If they are on a network, can you make a copy of one of them on your local machine and try again?
Can you open the files directly in Excel? What extension do they have (.xls, or something else?) I am wondering whether access to other file types has been left blocked on your machine but is allowed on your colleague's machine.
Are you just opening the mail merge main document and seeing this message? If so, do you see the same thing if you start with a new document and try to connect to one of these data sources?
Can you confirm that the message is about Access even though you are trying to connect to an Excel file?
(Also, office 2007 has some new stuff - that let's you specify that certain folders are "trusted" . I don't think that ever affected MailMerge but it may be as well to make sure that your documents and data sources are in trusted locations).
Also worth trying to start Word in "Safe mode" - see, e.g. http://office.microsoft.com/en-gb/word-help/work-with-office-safe-modes-HP010140792.aspx
Peter Jamieson

Can all Acrobat Readers open files with mixed orientation pages (portrait and landscape)?

Can all Acrobat Readers open files with mixed orientation pages (portrait and landscape)? If not, which versions can? Thanks!

Hi Sami,
You can open files with mixed page orientations in all Adobe Readers There is no such constraint on opening files with different page orientations in Adobe Readers.
In case if you have any other query please let us know. We will be happy to assist you.
Regards,
Aadesh

Multi-folio app with both portrait and landscape orientation

Can we create a multi-folio app that contains both portrait and landscape orientation folios?

A multi-folio app can have any mix of portrait, landscape, or dual-orientation folios in it. The only requirement is that for a specific folio all articles in it share the same orientation setting.
Neil

Images in portrait and landscape positioning

In portrait mode all my images are situated perfectly with text before the image and then text after the image. In one section I only have 4 images.
When I switch to landscape mode the images are situated in different positions - not radically different but different enough so that the text does not 'fit' with the flow of the image-supported narrative.
When I move the image one overlays on top of another :-/
Or hides behind a page if I move along to the required position.
I have deleted and re-added, moved text, created different sections so that only one image per section occurs (though this is stupidly inefficient!!) but a mess!
How do I add images within text so that both in portrait and landscape they (the images) are positioned correctly?
Thank you.

Mine are currently working when set to "Inline (moves with text)" and each takes a little adjustment. This is not satisfactory for me either. - Fabe

A single report can't combine portrait and landscape oriented pages

Post Author: joelo2
CA Forum: Crystal Reports
Hi,
Can a single report in Crystal report XI (version 11.5.8.826) combine portriat and landscape oriented pages like Crystal report 2008? For example, I have one main report with several subreports in the main report. I want one subreport be in portrait page orientation and the other subreports in landscape. Can I do something like that in Crystal report XI version? I even tried writing a small .net program to do this, but it doesn't seem to allow me to do that programmatically either. Please help

Post Author: ngra
CA Forum: Crystal Reports
I'd like to elevate this issue with Crystal Reports XI. There is a critical application which we developed in-house which needs both portrait and landscape orientation in each of the 30,000 plus documents we are sending out every month.If developers in Business Objects are picking this thread up - we need a patch for this limitation - quick. Right now, we are toying with the possibility of exporting the documents into a text format with markers indicating if a page is portrait or landscape. This is to be loaded into a Xerox machine (which costs hundreds of thousands of dollars), where it is mapped automatically to portrait or landscape. Note to Business Objects: This will provide us and countless others with much value. Think 80/20 rule - most bang for your development bucks and value for your customers!

Printing Document w/ both portrait and landscape pages

After some searching, I was able to create PDF forms with LiveCycle that had a mix of portrait and landscape content.
However, when I go to print the document from Acrobat Professional 8.0, it prints the landscape pages in portrait mode, thus cutting off the right side of the page.
When printing on computers with only Acrobat Reader, the pages all print properly. Is there a way to fix this?

If you just want a page the same size as the rest of the report but with the text printed sideways, you can do that in Pages.
If you want a fold out page (2 sheets wide) then you will have to make a second document for the wider sheet and, after skipping a page in the original, manually insert it after printing.
Alternatively the material can be scaled down to fit.
Hopefully in Pages '10 we will get spreads.
…as well as real color management, crop marks, spot color, slugs, direct selection tool, ability to select objects under other objects, a usable drawing tool, object library, user created shapes, convert text to outline…

How to create a single action for adding a border and signature for portrait AND landscape images???

i would love to be able to create a single photoshop action for adding a border, plus a signature in the bottom right corner, that works for both portrait and landscape images.
need i say more?!
i already have an action that adds a signature in the centre of the border at the bottom of the image e.g. the image below. what i want though is for that signature to be on the RHS and for the same action to work for portrait images as well.
supplementary info: reason for this is that I want to be able to export 300 wedding images (mix of landscape and portrait images) from lightroom in my pre-selected order (meaning the files are labelled from 001 to 300, ordered according to how the wedding day unfolded) and then use PS to add the border and the signature, in the same place, and for it to work for both orientations.
i need this to work for full sized exported jpeg images, i.e. i want the files that i give on CD to my clients to include my signature in this manner. so I don't want to copy the initial layer and then reduce the second layer size to leave a border around the second layer.
i hope i've been clear and that someone can help me here. I think that this sort of presentation makes such a difference to final printed image, and I DONT want to have to go to all 300 images picking out the landscape from portrait ones (although this may be what I have to do and wouldn't really take that long but surely there's a better way!!!!).
Thanks in advance photoshoppers ...

It is actually quite easy to do if you have a good understanding of how Photoshop works. To be able to handle any size Landscape and Portrait you need to scale the document to a known width or height. Once the document is resized to the width or height it easy. When yot resize the document you use Image size with resample NOT checked. Not a single image pixels is changed all the happens is the documents DPI is set to the proper DPI resolution to print that size. This lets you add a border sized for and document. You can use Canvas Size check relative and leatve the anchor point centered and set width and height to 2" this will add 1"on all sides. Use Canvas size a second time move the anchor point to the top center check relative and set height 1" the will add an additional 1" border on the bottom. You then record a text layer with your Name title or what ever to the top left of the image. Select all ant the align the text layer to the selection to move it to the bottom right.
Adding a couple of scripts to the action you can make sure there is a background layer so the added canvas will be filled with pixels. You can restore the document to its original DPI resolution to retain the images print size. Down load my crafting actions package it contains a dozen scripts to be used within actions. There are text file with tips and guidelines additionaly there is one on dealing with document size and includes a sample action set with a watermarking action the can watermark and size image. The Action set is also saved as a text file with additional comments I added my downloads can be found here http://mouseprints.net/Photoshop.html

Smartfroms for portrait and landscape format

Hi Experts,
can we able to create a form in two different format (Portrait and landscape) in a smartform. If any one have idea, Please assist me on the issue? if we can, can we able to extend secondary window for next page or not?
Appreciate your aid in advance.
Ram.

Hi Sharin,
Thank you for your response.
yes, you right we can use both formats (portrait and land scape) in one smartform. But, here my probelm is when i use two main windows with difrerent main window size (width), the SAP system is not accepting. and even the page break also not working in secondary window.
I want to display some number of forms with different format (say portrait and land scape). In this case the main window size is different. so how we can achieve solution for this issue.
if you have any idea, please share with me.
Thanks for your reply in advance.
Ram.

My Portrait and Landscape is lock. icon in status bar double tap home button to unlock there no multi-task bar how do i unlock this

My Portrait and Landscape is lock, icon in the status bar. Tried the double tap home button. there no multi-task bar to unlock

dg8wood wrote:
THANK YOU... This was driving me CRAZY.. how do I do the green check
You seem to have succeeded with the green check. Glad you got everything figured out!

Images in Portrait and landscape

I am trying aperture 3 on trial, I moved some images across from iphoto and now I have every image in portrait and landscape, how can I change this?

Mine are currently working when set to "Inline (moves with text)" and each takes a little adjustment. This is not satisfactory for me either. - Fabe

How to design an iPhone app that uses both Portrait and Landscape in Flash CS6

So I have created an App that has a different menu when it is held portrait, but changes when held landscape. I can get the navigation to work, However I am unsure how to design landscape pages inside Flash?
My stage is set to the standard 640x960 air for iOS, which gives me perfect portrait pages, But when I tilt my phone to landscape the screen obviously changes, and it looks weird. Im hoping someone can tell me how i can get this view inside Flash, while still having the portrait screens too?
I want to have both Portrait and Landscape in the same app, and am currently so confused how I can design this inside flash?
I hope this makes sense, and that someone could throw some help my way!

you can change the display depending on stage orientation but it doesn't make sense to "..swap the stage orientation between screens".
to change the display, use a StageOrientationEvent.ORIENTATION_CHANGE event and listener:
stage.addEventListener("orientationChange", orientationChangeF);
function orientationChangeFr(e:StageOrientationEvent):void{
trace(e.afterOrientation.toString());

Section header with portrait and landscape view

Similar Messages

Maybe you are looking for