Sections of report not being displayed on some systems

Post Author: jlutz
CA Forum: General
Hello... strange issue... We have these Crystal 11 reports deployed that are being called via a VS .NET 2005 application. The reports display fine on most systems, but on some systems (Dells, a few years old, 512mb of ram), sections of the report are not being displayed. For example, on one report parts of the header are not displayed, nor is some of the subtotal sections etc.However, if they zoom to 75%, they can view the subtotal section but the header part disappears. Additionally, if they export or print the report, it comes out just fine! Any idea what could be going on here? Thanks!

Post Author: PeterLiebich
CA Forum: General
I have issues in ReportDesigner when I have my hardware acceleration set at maximum try reducing it. Goto
ControlPanel-> Display Properties (settings Tab) -> Advanced Button -> troubleShoot tab. I had to set my down by 4 notches before it worked. - Try setting it to none to see if it fixes your issue

Similar Messages

EWA Report not being sent for two systems

Hi Experts,
We are having one issue in EWA Report in solution manager. Searched hard but could not find solution.
Our solution manager is configured to provide EWA for 4 systems- ECC, BW, PI and Solution manager itself.
The configurations are in place to the extend that we are able to view the weekly reports in Solution manager.
Issue is -
1. We are able to recieve mail notification for Solution Manager and ECC but not able to get for BW and PI.
2. The ECC report is coming ok, but Solution manager report is blank.
The places I checked the configuration -
1. SDCCN for all systems.
2. SOLMAN_EWA_ADMIN - all systems active and chcked for EWA
3. Background Jobs for all systems -Maintenance Package, Refresh Session, Earlywatch Alert for Solution Manager
4. Background Jobs related to the task including SM:EXEC SERVICES
Later on I deleted and rescheduled the job SM:EXEC SERVICES to make sure it covers all systems.
Data is visible in Solution Manager but report is not being sent over mail for two systems- BW and PI.
Solution manager report is being sent but empty.
Please suggest.
Regards,
Sabita

Hi,
what is your ST verison? check this note applicable or not
[https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1496931|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1496931]
and chek the version of your service updated ST_SER too, patch this also solve the issue
refer this [Note 1482818 - Service updates ST-SER 701_2010_1|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=0001482818&nlang=E]
Jansi

Album art not being displayed for some songs.

I've recently imported some MP3 files and used the "Get Album Artwork" option to get the cover art. I've noticed for all of these songs the album artwork will not display in Front Row on a remote machine using the sharing feature. Same in iTunes if I try to play these songs via sharing. If I add the cover art myself, I don't have this issue.
Anyone else running into this? Does anyone know a fix or workaround (other than removing the artwork and manually readding it)?
All my machines have the latest versions of all software.
Thanks
Curt

Thanks! You are right. There's an Album Artwork folder and I scp'd one of my "affected" mp3s to another machine and the artwork was absent. Seems like Apple should've just added the artwork to the mp3 file as if it was manually added. Perhaps they had a reason not to, though.

Crystal Reports 2010 SP1 on IIS 7.0 - Report is not being displayed

Hi,
Finally, the keycode assembly, BusinessObjects.Licensing.KeycodeDecoder.dll error is gone, after I installed Crystal Runtime 2010 SP1. Also, I tested Crystal Report 2010 SP1 on my Windows 32 application and I can tell that I do not have this error anymore and report is being displayed properly.
But Crystal Report is not being displayed on ASP.NET page on MS Server 2008 standard edition SP2 with IIS 7.0. Database resides on iSeries remote machine.
The MS Server 2008 is virtual machine.
OS system has:
Crystal Report Basic Runtime for Visual Studio 2008
SAP Crystal Reports Runtime engine for .NET Framework 4 (32-bit)
Simply the report is not being displayed at all. No errors are being recorded in the Event Viewer.
Nothing happens; excerpt the page is Loadingu2026 and Waiting for u2018website nameu2019 in the left lower corner of Firefox web browser.
Here is the code behind aspx page with a command button - very simple:
using CrystalDecisions.CrystalReports.Engine;
using CrystalDecisions.Shared;
protected void Button1_Click(object sender, EventArgs e)
ReportDocument crReportDocument;
Database crDatabase;
Tables crTables;
// CrystalDecisions.CrystalReports.Engine.Table crTable;
TableLogOnInfo crTableLogOnInfo;
ConnectionInfo crConnectionInfo;
crConnectionInfo = new ConnectionInfo();
//Set server name
crConnectionInfo.ServerName = this._strServerName;
//set database name
crConnectionInfo.DatabaseName = this._strDatabaseName;
crConnectionInfo.UserID = this._strUserID;
crConnectionInfo.Password = this._strUserPassword;
//Set integrated security
crConnectionInfo.IntegratedSecurity = false;
crReportDocument = new ReportDocument();
crReportDocument.Load(Server.MapPath("~/crystal-reports/TransformerLoad/TransLoadMonthlyMax.rpt"));
crDatabase = crReportDocument.Database;
//Set all tables from current report file
crTables = crReportDocument.Database.Tables;
//crTableLogOnInfo.ConnectionInfo = crConnectionInfo;
//Apply schema name to the table's location
foreach (CrystalDecisions.CrystalReports.Engine.Table _crTable in crTables)
crTableLogOnInfo = _crTable.LogOnInfo;
crTableLogOnInfo.ConnectionInfo = crConnectionInfo;
_crTable.ApplyLogOnInfo(crTableLogOnInfo);
//Check if database table name starts
if (_crTable.Location.StartsWith("XFMRSMAX", StringComparison.CurrentCulture) ||
_crTable.Location.StartsWith("XFMRSMIN", StringComparison.CurrentCulture))
//_crTable.Location = this._strSchemaName + "." + _crTable.Location.Remove(8) + Convert.ToInt32(Request.QueryString\"ReportYear\");
_crTable.Location = "XFMRSMAX09";
else
_crTable.Location = _crTable.Location;
this.CrystalReportViewer1.ReportSource = crReportDocument;
This code runs on my development machine Win XP SP3
OS system has:
Crystal Report Basic Runtime for Visual Studio 2008
SAP Crystal Reports Runtime engine for .NET Framework 4 (32-bit)
This code also runs on another development server - Windows XP SP3 (IIS 5.1)
OS system has:
Crystal Report Basic Runtime for Visual Studio 2008
SAP Crystal Reports Runtime engine for .NET Framework 4 (32-bit)
ispnet_client folder has IUSR user and this user has read permissions to this folder. I even tried to change the permissions to Read & Execute.
I am developing my reports using Crystal Reports 2008 SP2.
Any help would be greatly appreciated.
Serghei

Hi Ludek,
Thank you for your response.
I checked the web.config file, all http handlers are there. I think the handlers are required to render the images on crystal report viewer but in my case the report viewer is not being rendered.
I have to questions:
1. What exact folders should be under aspnet_client\system_web?
In my case I have structure like this
aspnet_client\system_web\2_0_50727\crystalreportviewers13
aspnet_client\system_web\4_0_30319\crystalreportviewers13
Should I have folders something like this
aspnet_client\system_web\2_0_50727\crystalreportviewers13_1
aspnet_client\system_web\4_0_30319\crystalreportviewers13_1
after I installed Crystal Reports 2010 SP1
Also, in C:\Program Files\SAP BusinessObjects\Crystal Reports for .NET 4.0\Common\Crystal Reports 2011\ there is no folder named as crystalreportviewers13 but instead crystalreportviewers
a.     Should I copy all files from this folder to aspnet_client\system_web\2_0_50727\crystalreportviewers13, or
b.     Should I copy all files from this folder to aspnet_client\system_web\2_0_50727\crystalreportviewers13 and rename this folder to
crystalreportviewers
2. Can you explain how to get a data report?
This is the quote from your previous answer
I'd be interested to see this simplified to a saved data report - no DB logon code - as a test...
Thank you Serghei

PDF files not being displayed correctly, instead I get a blank screen with some sort of small pinned icon in the centre. It was working fine until today HELP!

PDF files not being displayed correctly, instead I get a blank screen with some sort of small pinned icon in the centre. It was working fine until today HELP!

What is your operating system? Reader version? Are these local or online PDFs? If online, in what browser?
Can you post a screenshot: https://forums.adobe.com/thread/1070933

[svn] 1978: Bug: vendors. properties file which is used in vendor specific login commands was not being read properly and as a result some login related error messages were not being displayed correctly .

Revision: 1978
Author: [email protected]
Date: 2008-06-06 08:05:34 -0700 (Fri, 06 Jun 2008)
Log Message:
Bug: vendors.properties file which is used in vendor specific login commands was not being read properly and as a result some login related error messages were not being displayed correctly.
QA: Yes - we need automated tests to make sure that errors.properties and vendors.properties in BlazeDS/LCDS are loaded properly.
Doc: No
Modified Paths:
blazeds/branches/3.0.x/modules/common/src/java/flex/messaging/util/PropertyStringResource Loader.java
blazeds/branches/3.0.x/modules/opt/src/jrun/flex/messaging/security/JRunLoginCommand.java
blazeds/branches/3.0.x/modules/opt/src/tomcat/flex/messaging/security/TomcatLoginCommand. java

I have a lot of grief with this version of Windows Media Player.
It is very buggy and frustrating to use.
I have my Music library on a QNAP NAS, which is as reliable as they come.
System notifications make it not save changes. It also does not do a good job of interpreting albums and artists from folders. Changes to track names are not saved, nor are tracks moved to other albums, renamed albums, changes to genre, artist
or date. It separates and merges albums/tracks without sense or reason. Some changes I've made up to 4 times, then closed WMP and re-started my machine to check if it has/hasn't saved the changes. Often it has not.
This is the first time I've used WMP in this capacity, and I do not recommend it.
New service pack please.

All day calendar events not being displayed in the notification centre for iphone 5 post ios 7 upgrade. Please help. Is it a bug?

All day calendar events not being displayed in the notification centre for iphone 5 post ios 7 upgrade. Please help. Is it a bug?
With iOS 6, the all day events showed up in the notification centre but it lacks in the upgrade iOS 7.

Same problem here. Some people pointed out that all-day events do show up in their notification center, but that seems only to be the case for birthdays (and only as text like the weather). I've tried it myself on my iPhone and iPad and it did work for birthdays but not for any other all-day events. I already sent this to Apple as a product feedback as well, as should everyone of you. The more people mention it, the faster Apple's going to fix this issue. In its current state, notification center is not a very helpful feature in my opinion. There's absolutely no point in not showing all-day events in the 'today' calendar overview.
Here's a link to the product feedback page: http://www.apple.com/feedback/
I posted my message in the iPhone section since I couldn't find a page specifically dedicated to iOS 7.
I really love the look & feel of iOS 7 but it's kinda sad to see notification center not tapping its full potential.
Cheers!

Coulmn values is not being displayed in obiee 11g

Hi All,
Below is the sample xml generated from data structure.
++
+<DATA_DS>+
+<G_1>+
+<LOCATION_NAME>ABCD</LOCATION_NAME>+
+<PRODUCT_ID>1012331403</PRODUCT_ID>+
+<PRODUCT_SUBID>101233140302</PRODUCT_SUBID>+
+<PRODUCT_NAME>ABCD1</PRODUCT_NAME>+
+<REVENUE>3924973.97</REVENUE>+
+</G_1>+
+<G_1>+
+<LOCATION_NAME>ABCD</LOCATION_NAME>+
+<PRODUCT_ID>1012331401</PRODUCT_ID>+
+<PRODUCT_SUBID>101233140104</PRODUCT_SUBID>+
+<PRODUCT_NAME>ABCD2</PRODUCT_NAME>+
+<REVENUE>688244.58</REVENUE>+
+</G_1>+
+<G_1><LOCATION_NAME>EFGH</LOCATION_NAME>+
+<PRODUCT_ID>1011165401</PRODUCT_ID>+
+<PRODUCT_SUBID>101116540101</PRODUCT_SUBID>+
+<PRODUCT_NAME>EFGH1</PRODUCT_NAME>+
+<REVENUE>3763099.99</REVENUE>+
+</G_1>+
+</DATA_DS>+
We were unable to see the REVENUE column values in the report. We were able to see the values while creating layout, but unable to see the values in report. Report is not having any filters or parameters. This is build on two tables. Revenue in one table and details in another table.
Thanks.

Hi,
Just noticed that, able to see column values in HTML, pdf views but unable to see in interactive view.
While creating the layout checked in Interactive view, at that time able to get column values, but in the report column values are not being displayed in interactive view.
But in HTML, list option , Repeating Section is not working, so have to see in interactive view only.
I can say, in Interactive vew Aggregate functions are not working properly. We need tro use Repeating Section and List option in report. so we need interactive view only.
Any ideas..
Thanks.

Dynamic image is not being displayed in Adobe Reader 8.1

Hi,
In interactive form, we have followed below required steps to show a dynamic image.
For the left image, drag and drop an Image Field element from the standard Library tab to the Body Pages pane. Select this image field and edit the following properties:
Click on the Layout tab and choose None for the Caption position.
Click on the Object, then the Binding tab and choose None for Default Binding.
Click on the Field tab, enter $record.SapOnlineShopUrl for the URL entry, and select Use Image Size for the Sizing field.
Click on the script editor and enter the following FormCalc script statement, which enables the dynamic integration of the image. Show: initialize Script: this.value.image.href = xfa.resolveNode(this.value.image.href).value;
Language: FormCalc Run At: Client
Image is displayed properly in Adobe reader 7.1 but it's not being displayed in Adobe reader 8.1.
I was going through some forums and understand that Adobe 8.1 blocks href URL. If this is indeed true, what's the alternative way to show a dynamic image?
Regards
Chandra
Edited by: Chandrashekhar Singh on Apr 24, 2008 7:28 AM

Soory, I thought its static image....
Regards,
Vaibhav Tiwari.
Edited by: Vaibhav Tiwari on Apr 24, 2008 11:45 AM

Images not being displayed in metro apps

OS: Windows 8.1 enterprise
Images are not being displayed (a small cross mark shown on the left) when I open metro apps that I download from Store. The store as well doesn't show images. I am able to see images in some built in metro apps like travel and weather.
What's the fix. I guess the company network is blocking it. What is the work around?
Thanks.
NOTE: This is WINDOWS 8.1 METRO UI issue. It doesn't have anything to do with VISIO. The only option that I had to choose when i selected Windows 8.1 is VISIO. This site appears to be broken and not user friendly.

Hi,
Which metro app did you download and occur the issue? As you post the question in Visio forum, did you use Visio 2013 preview? As far as I know, the version had been off the store after the official version released.
If I misunderstand, please give me more information (Such as App name) or images about your question.
Regards,
George Zhao
TechNet Community Support

Check boxes are not being displayed in any list applets

Issue: The check boxes are not being displayed in any list applets in the system. A check box can be marked in the system, but as soon as the user clicks anywhere outside of the box the check box 'visibly' disappears. If you hover the mouse over the check box it displays a 'Y'. However, check boxes are working fine for the form applet, the issue is only with the list applet.
I verified the checkboxes work fine in the thick client and in production. However, it is the testing environment, which belongs to client, that is showing the above behavior. I think there is some setting that is missing for them. But I am unable to figure it. I would really appreciate if someone could help !!
Thanks in advance

One way that you could make it work (just tried it out again) is to use the windings font
and use the checkboxes from there. However, you need to register the font with xml publisher. In the template builder for Word, you can put a configuration file under:
C:\Program Files\Oracle\XML Publisher Desktop\Template Builder for Word\config
(depnding on your installation). The file should have the name xdo.cfg or xdoconfig.xml.
There is an example file: xdo example.cfg that you rename and change accoringly.
The font is there setup for windows 2000 as an example. Select the correct font
path - for my XP it is:
<font family="Wingdings" style="normal" weight="normal">
<truetype path="C:\WINDOWS\fonts\wingding.ttf" />
</font>
Then you can put the symbols into your RTF template and it will be rendered.
At least it worked for me - with 5.6.2. (Availbable on Wednesday or Thursday), but
I am pretty sure I tried it before with 5.5.
Didn't have the 5.5 manual with me - so I have to check what that says again..
Hope it helps,
Klaus

Special characters are not being displayed normally after recent update.

FF messed up with that recent update. Special characters are now not being displayed properly - they somehow stretch the whole line where they are posted. It was fine before
I.E.:
http://www.discogs.com/artist/%E2%84%91%E2%8A%87%E2%89%A5%E2%97%8A%E2%89%A4%E2%8A%86%E2%84%9C
ℑ⊇≥◊≤⊆ℜ
Here you can see what I mean (Opera & FF screenshots), Opera has no problems with them, see highlighted:
http://img525.imageshack.us/img525/3897/image16m.jpg
Thanks

Which version were you using before?
Some font issues may be caused by graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You can disable it, but you might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
orange Firefox button ''or'' classic Tools menu > Options > Advanced
On the "General" mini-tab, uncheck the box for "Use hardware acceleration when available"
Does that make any difference?

Images are not being display in people search for few users - why ?

Hello,
In my farm, users having profile picture in UPSA and they are able to see in My Profile page as well.
However when I find user in People search - images are not being display for few users while for others it works.
I have checked picture property which is indexed and then I run full crawl still its same issue.
Following are the settings for Picture Property - would you please let me know why its still not being display in people search ?
Dipti Chhatrapati

Dipti,
Hope below urls will help you,
https://littletalk.wordpress.com/2010/12/10/people-search-result-doesnt-have-images-in-sharepoint-2010/
https://social.technet.microsoft.com/Forums/office/en-US/eea8aa10-4565-41bf-98ec-dc93fb600021/some-users-pictures-are-not-showing-in-people-and-groups-but-are-viewable-in-the-thumbnail-and-my?forum=sharepointgeneralprevious
http://westerdale.biz/sharepoint-2010/display-active-directory-profile-thumbnail-photo-and-other-attributes-in-sharepoint-2010?doing_wp_cron=1421939809.4895009994506835937500
Sudip
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

ISE CSR not being displayed

I have an ISE Primary Monitor node that the Server Certificate has expired. I generated a new CSR and it reported that it was created and could be viewed under the Certificate Signing Requests tab but it never showed up. Tried to re-generate but it now states that it already exists. Rebooted the device to see if that would fix the issue but the CSR is still not showing. For a test I created another CSR using the ip address of the device as the CN; and again it reported that it could be viewed but is not being displayed under the CSR tab. These are the log items when I created the initial CSR and what it shows when I tried to create another using the same CN. The version of ISE is 1.1.3.124. I was able to create CSR and update Certificates on the Administration/Policy nodes.
237 INFO 2014-09-22 11:43:07,237 [http-443-29][] cpm.admin.infra.action.LocalCertAddAction- Certificate Signing Request DC-ISE-2_int_fhfa_gov#PID$_NAC3315-SVR_______$_VID$_V01$_SN$_KQ586M0____ was created successfully. 2014-09-22 11:43:16,
174 ERROR 2014-09-22 11:44:33,174 [http-443-29][] cpm.admin.infra.action.LocalCertAddAction- Unable to import certificate : com.cisco.cpm.infrastructure.certmgmt.api.CertMgmtException: Resource Name 'NAC Group:NAC:CertificateRequests:DC-ISE-2_int_fhfa_gov#PID$_NAC3315-SVR_______$_VID$_V01$_SN$_KQ586M0____' already exists. 2014-09-22 11:44:36,
Thanks

Tried generating another CSR from a different app but no success.
Opened a TAC case and was told that this is a bug CSCuh91639, Worked with TAC engineer to have them go into the DB with root access on this node and the primary node to delete the CSR. Also had de-register the ISE from the deployment and then reset the ISE to default setting to have it create a new self signed cert to allow re-registering the device into the deployment. After this I was able to create a CSR and generate a cert from our CA.
Will look into updating to 1.2 since this bug is fixed in that version.

Excelicon is not being displayed in the alv output

Hi,
iam using the standard tool bar, yet the excel icon is not being displayed in alv ouput.and also in the menubar list export the spreadsheet option is gr

OSS# 1140542?
or you may search other.
Edited by: Amit Gujargoud on Nov 3, 2008 3:10 AM

Sections of report not being displayed on some systems

Similar Messages

Maybe you are looking for