Secuential field
Hi experts!
I'm making a new Z table and I need a secuential field in it. Do u know if is there any kind of element in SAP to define a field as auto secuential?
It would be somtething like this:
1
2
3
4
5
6
7
Or I have to calculate the value of the field when I want to insert a register?.
Thanks.
Hi Jorge,
You can use the number ranges for the field for which you want to have a sequential number range. But remember you will have to ensure while inserting records in this table, you actually should use the function Module 'NUMBER_GET_NEXT'.
The transaction where you need to create a number range object is SNRO. Here you create a number range object refering to the dataelement and then you can define number range values as well. And while populating this table all that you need to do is call the number_get_next function module to get the next sequential number and pass it to the field.
If you are looking to do it automatically without using the SNRO and without coding it, then the answer is no.
Hope this helps.
Regards,
Srikanth
Similar Messages
-
Hi,
i´m developing a ZTABLE. In this ztable there are two key fields. One of them (
ZNUMDE) must be the result of concatenating sy-uname(3) sy-datum+2(2) and a secuential
number of 2 digits the moment the entry is created.
This key field must distinguish the number of entries in the table by user.
e.g. user PETER has 2 entries -> 1st ZNUMDE = PET0501
2nd ZNUMDE = PET0502
for user JOHN (1 entry) -> ZNUMDE = JOH0501.
In order to achieve this i´ve created a maintenance view of the table and within the event '01' BEFORE SAVING IN THE DATABASE i´ve created a routine within which i´ve added the following code: DATA: v_max(2) TYPE i,
v_numde(7) TYPE c,
v_conta(2) TYPE c.
CLEAR: v_max, v_numde, v_conta.
Here i check the number of entries of a the user
SELECT COUNT( DISTINCT usuar ) INTO v_max
FROM ZTABLE WHERE usuar = sy-uname.
IF v_max GT 0.
v_max = v_max + 1.
v_conta = v_max.
ELSE.
v_max = 1.
v_conta = v_max.
ENDIF.
SHIFT v_conta RIGHT.
REPLACE '' WITH '0' INTO v_conta.
CONCATENATE sy-uname(3) sy-datum+2(2) v_conta
INTO z_v_devolucion-numde.
z_v_devolucion-usuar = sy-uname.
The question is that thus i´m not able to get ZDEVNUM as desired.
Any suggestion?
Best regards.Hi!
It would be easier, if you had described your current (wrong) result.
But my guess is, your not counting existing entries correctly.
Your key znumde has three parts: user, year and counter. In your select, you define just user, but not year.
But when you have already second field usuar (why not user?) for user-id, why not split your key into three separate fields? This would make your selection easier:
select count( * ) into v_max
from ztable
where user = sy-uname
and year = sy-datum+2(2)
and (other key except counter).
By the way: you create a year 2100-problem!
Use v_max type i instead of v_max(2).
with v_conta(2) type n you might get correct format without additional conversion. Otherwise FM CONVERSION_EXIT_ALPHA_INPUT will do the job, too.
Or do you struggle with the event?
Regards,
Christian -
Hi experts,
I have the field 0fiscyear in my dso and also in the cube. But
when creating transformation the field 0fiscyear is present in
the dso but not in the cube. So that i am unable to create
transformation for 0fiscyear.Anyone please explain me what
should i do to make the field visible in the cube.
And one more question. How can we select or hide the fields
of 0fi_ar_3.This data source is not visible in LBWE.
Full points will be assigned.
Thanks & Regards,
V N.Hi VN,
Goto SBIW->Application Specific>Logistics>manage extract struvctures>initialization->appl specific setup of statistical dat -->select inventory mangement perform setup>
in the select materil movement/Setup: Invoice Verification, Revaluation as per your choice to load.
direct transaction OLI1BW for material movement
OLIZBW for invoice verification
once you gets into statistical setup give name of the run and termination time and date to setup then gofor excution
once setup tables start loading gotoRSA3 which is extrac chekor to chk u r datasource data
before all this make sure your data source as active.
i hope this is clear na
mahesh
Edited by: Mahesh Kumar on May 19, 2008 7:00 AM
Edited by: Mahesh Kumar on May 19, 2008 7:01 AM -
Fields in Creation of free goods VBN1
hi everybody,
Can somebody expalin in detail the fields in creation of free goods(T-vbn1) like free goods quantity,additional quantity,documnet quantity and calculation rule....
<b>Please dont copy paste anything form SAP help....I read that one......</b>
I would appreciate if u explain with your sentence..
Will reward point if it helps.
GhassanHi Gafoor,
Material
Material, for which free goods is to be
granted
Minimum quantity
Minimum quantity for which free
goods can be granted
From
Quantity of sales material
FGQ--- Quantity unit of free goods material
Free goods -- Quantity of free goods with reference to the quantity and quantity unit of the sales material.
AQU - Quantity unit of the free goods additional quantity
Rule - Calculation rule
Prorata
whole units
unit related
D -- Delivery controlling - it tells how you can manage the delivery of free goods with respect to the main item ordered.
Additional material - Additional material (only available for entry in exclusive free goods)
Hope it helps. Please reward if helpful.
Thanks & Regards
Sadhu Kishore -
Hi all,
i have to develop a ALV report.
In that report i have to put a open quantity column , so that the user can enter values in that, and that value should get updated in the database.
So please suggest me how to develop such report with open field.
Thanks in advance,
Regards,
PawanHi,
Try executing the below code
REPORT YMS_EDITBLOCKALV.
TABLES : rmmg1,MCHB, mkpf.
DATA: BEGIN OF t_mseg OCCURS 0,
zeile LIKE mseg-zeile,
menge LIKE mseg-menge,
meins LIKE mseg-meins,
matnr LIKE mseg-matnr,
werks LIKE mseg-werks,
charg LIKE mseg-charg,
bwart LIKE mseg-bwart,
END OF t_mseg.
DATA:BEGIN OF t_mchb OCCURS 0.
INCLUDE STRUCTURE mchb.
data flag type c.
matnr LIKE mchb-matnr,
charg LIKE mchb-charg,
werks LIKE mchb-werks,
clabs LIKE mchb-clabs,
DATA END OF t_mchb.
TYPE-POOLS slis.
data: progname like sy-repid,
fieldcattab TYPE slis_t_fieldcat_alv WITH HEADER LINE.
data tabindex type i.
data wa_matnr LIKE mchb-matnr.
progname = sy-repid.
SELECTION-SCREEN BEGIN OF BLOCK b_b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS s_docno FOR mkpf-mblnr. " OBLIGATORY.
PARAMETERS p_docyr LIKE mkpf-mjahr. " OBLIGATORY.
SELECTION-SCREEN END OF BLOCK b_b1.
START-OF-SELECTION.
SELECT zeile
menge
meins
matnr
werks
charg
bwart
FROM mseg
INTO TABLE t_mseg
WHERE mblnr IN s_docno AND mjahr = p_docyr.
CLEAR fieldcattab.
fieldcattab-col_pos = 1.
fieldcattab-fieldname = 'ZEILE'.
fieldcattab-tabname = 'T_MSEG'.
fieldcattab-fix_column = 'X'.
fieldcattab-seltext_l = 'Item'.
APPEND fieldcattab.
CLEAR fieldcattab.
fieldcattab-col_pos = 2.
fieldcattab-fieldname = 'MENGE'.
fieldcattab-tabname = 'T_MSEG'.
fieldcattab-seltext_l = 'Quantity'.
APPEND fieldcattab.
CLEAR fieldcattab.
fieldcattab-col_pos = 3.
fieldcattab-fieldname = 'MEINS'.
fieldcattab-tabname = 'T_MSEG'.
fieldcattab-seltext_l = 'Unit'.
APPEND fieldcattab.
CLEAR fieldcattab.
fieldcattab-col_pos = 4.
fieldcattab-fieldname = 'MATNR'.
fieldcattab-tabname = 'T_MSEG'.
fieldcattab-seltext_l = 'Material'.
APPEND fieldcattab.
CLEAR fieldcattab.
fieldcattab-col_pos = 5.
fieldcattab-fieldname = 'WERKS'.
fieldcattab-tabname = 'T_MSEG'.
fieldcattab-seltext_l = 'Plant'.
APPEND fieldcattab.
CLEAR fieldcattab.
fieldcattab-col_pos = 6.
fieldcattab-fieldname = 'CHARG'.
fieldcattab-tabname = 'T_MSEG'.
fieldcattab-seltext_l = 'Batch No'.
APPEND fieldcattab.
CLEAR fieldcattab.
fieldcattab-col_pos = 7.
fieldcattab-fieldname = 'BWART'.
fieldcattab-tabname = 'T_MSEG'.
fieldcattab-seltext_l = 'Inventory'.
fieldcattab-hotspot = 'X'.
APPEND fieldcattab.
end-of-selection.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = PROGNAME
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'USERCOMMAND1'
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT =
IT_FIELDCAT = fieldcattab[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IT_ALV_GRAPHICS =
IT_ADD_FIELDCAT = fieldcattab
IT_HYPERLINK =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = t_mseg
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
FORM usercommand1 USING r_ucomm LIKE sy-ucomm rs_selfield TYPE
slis_selfield.
CASE r_ucomm.
WHEN '&IC1'.
tabindex = rs_selfield-tabindex.
read table t_mseg INDEX tabindex.
select * from mchb into table t_mchb where matnr = t_mseg-matnr.
clear fieldcattab.
CLEAR fieldcattab[].
fieldcattab-col_pos = 1.
fieldcattab-fieldname = 'FLAG'.
fieldcattab-tabname = 'T_MCHB'.
fieldcattab-fix_column = 'X'.
fieldcattab-seltext_l = 'Check Box'.
fieldcattab-input = 'X'.
fieldcattab-edit = 'X'.
fieldcattab-checkbox = 'X'.
APPEND fieldcattab.
clear fieldcattab.
fieldcattab-col_pos = 2.
fieldcattab-fieldname = 'MATNR'.
fieldcattab-tabname = 'T_MCHB'.
fieldcattab-fix_column = 'X'.
fieldcattab-seltext_l = 'Material'.
fieldcattab-emphasize = 'C1'.
fieldcattab-input = 'X'.
fieldcattab-edit = 'X'.
fieldcattab-checkbox = 'X'.
APPEND fieldcattab.
clear fieldcattab.
fieldcattab-col_pos = 3.
fieldcattab-fieldname = 'CHARG'.
fieldcattab-tabname = 'T_MCHB'.
fieldcattab-seltext_l = 'Batch No'.
fieldcattab-emphasize = 'C2'.
fieldcattab-input = 'X'.
fieldcattab-edit = 'X'.
APPEND fieldcattab.
clear fieldcattab.
fieldcattab-col_pos = 4.
fieldcattab-fieldname = 'WERKS'.
fieldcattab-tabname = 'T_MCHB'.
fieldcattab-seltext_l = 'Plant'.
fieldcattab-emphasize = 'C30'.
fieldcattab-input = 'X'.
fieldcattab-edit = 'X'.
APPEND fieldcattab.
clear fieldcattab.
fieldcattab-col_pos = 5.
fieldcattab-fieldname = 'CLABS'.
fieldcattab-tabname = 'T_MCHB'.
fieldcattab-seltext_l = 'Stock'.
fieldcattab-emphasize = 'C601'.
fieldcattab-input = 'X'.
fieldcattab-edit = 'X'.
APPEND fieldcattab.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = PROGNAME
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'USERCOMMAND2'
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT =
IT_FIELDCAT = FIELDCATTAB[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IT_ALV_GRAPHICS =
IT_ADD_FIELDCAT =
IT_HYPERLINK =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = t_mchb
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endcase.
endform.
FORM usercommand2 USING r_ucomm LIKE sy-ucomm rs_selfield TYPE
slis_selfield.
CASE r_ucomm.
WHEN '&IC1'.
IF rs_selfield-sel_tab_field = 'T_MCHB-MATNR'.
CALL FUNCTION 'ZALV2'
EXPORTING
CTU = 'X'
MODE = 'E'
UPDATE = 'A'
GROUP =
USER =
KEEP =
HOLDDATE =
NODATA = '/'
MATNR_001 = '200-200'
KZSEL_01_002 = 'X'
IMPORTING
SUBRC =
TABLES
MESSTAB =
SET PARAMETER ID 'RID' FIELD RMMG1-MATNR.
CALL TRANSACTION 'MM03' and skip first screen.
ENDIF.
ENDCASE.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = progname
i_callback_user_command = 'USERCOMMAND3'
it_fieldcat = fieldcattab[]
TABLES
t_outtab = t_mchb
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
endcase.
ENDFORM.
Regards,
chandru -
Necessary Fields For Creation of Service PO of Order Type Relaese Order.
Dear Guru,
I have encountered an issue which i am trying to resolve...
My this requirment will seem little okward the way i am asking but i have no way...
The issue is I have to create a Service PO of Order type Release order (RO) using BAPI Function Module .BAPI_PO_CREATE1.
The service PO should be of multiple Item and services for particular line item should be multiple.
When I am creating this using ME21 or ME21N i am facing no issue.
But when i am using BAPI Function Module .BAPI_PO_CREATE1
i am getting following errors ;; The error which i am getting as below
T ID NUM MESSAGE
E BAPI 001 No instance of object type PurchaseOrder has been created. External reference:
E MEPO 000 Purchase order still contains faulty items
E SE 029 Please maintain services or limits
E SE 140 Service HIRING OF LCD: please specify unit of measure
But I am failing to findout in which field services or limits and unit of measurement have to maintain.
What are the necessary fields have to pass in Bapi import parameter and the table i am unable to findout.
Please show some way how to resolve this or give me some guideline to resolve this
Dear Moderator request your kind intervane to move this qurry into correct forum if i have asked this in wrong forum
Thanks and regards
saifur rahamanHi Saifur
Can you please elaborate how did you resolve the issue we are also facing same problem when we are trying to create the PO for service items through SRM it is throwing same error while creating the PO in SAP.
Email Id : [email protected]
Thank you in advance!!
Regards
Deepika -
Issue in Creation of new Value Field in CO-PA
Hi,
I have a query in CO-PA Value Field Linking.
In my Development Client,
1. Created a New Value Field (No Transport Request Generated)
2. Linked to the above to new Conditon type created in SD. (Tranport request was generated) i.e. in Flow of Actual Values->Transfer of Billing Documents->Assign Value Fields
However then i try creating a new Value Field in my Production Client it throws a message 'You have no authorization to change Fields".
Is this an issue with authorization or i need to transport the Value field too from Development to Production client.
Please Advise.
Thanks in Advance,
SafiThanks Phaneendra for the response.
The creation of Value field did not create any tranportation request. Will this too be transported if i transport the Operating Concern.
Please Advise.
Thanks,
Safi -
What are the mandatory fields while creation of material master in differen
what are the mandatory fields while creation of material master in different views?
Hi Gopi,
This is purely depends on the function configuration, which would be done MM consultants. Kindly check with them.
thanks & regards
Kishore Kumar Maram -
BADI for changing fields during Creation of BP in CRM
Hello to everyone,
I need to find a BADI (or other way) to default several fields during BP creation in CRM (4.0 SR1 SP9). The fields I will like to set are TAX TYPE, TAX NUMBER, TAX CATEGORY, etc.. I have found the BADI BUPA_TAX_UPDATE but i dont see any suitable parameters (structures) to changes these fields. Please advice and thanks in advance.Hi
If you use function BUPA_NUMBERS_GET then your BP number will already be buffered and you can avoid a DB read. It may also be that the BP is not in the DB yet anyway.
You can only pass one GUID in at a time - loop through IT_CHANGED_INSTANCES into a variable of type BU_PARTNER_GUID and pass that into the function as input parameter IV_PARTNER_GUID.
Cheers
Dom -
Fields for creation of BP in cProjects front-end are read-only
Hi everyone,
I'm a beginner in SAP-Development/Customizing so I hope this question isn't too easy
I can't create a Business Partner using the cProjects front-end (Ressources > Staffing) because the necessary fields and buttons are read-only... (> web-Dynpro Component: DPR_ROL_STAFF; View-Info: VI_SEARCH_CREATE)
I'm using CPRXRPM 450_700 patch 0006
The field-control is standard-SAP (0SAP).
My user-account has all cProject-roles + SAP-ALL
I assume i can change the behaviour of these fields in the Field Control but I can't identify which is the corresponding Object Category to apply the changes.
- Is there a documentation which field belongs to which Object Category in Field Control?
- Or can somebody tell me a procedure to find it out on my own?
Thanks in advanceHi,
generally it is recommended to use transaction BP or ALE distribution to get the business partner be created.
If you would like to create the BP in web UI directly, the user must have the Structural Authorization, see customizing path:
Collaboration Projects -> Resource Management -> Organizational Management.
It is very HR related topic, you may contact a HR consultant to know more details about it.
Kind regard,
Zhenbo -
Error while selecting the fields in creation of Look-Up
Hi Experts,
I am getting following error message when writing a lookup.
Unknown column name "/BIC/XXXXXX" until runtime, you cannot specify a field list.
Would like to know whats the cause and how to solve it.
Regards
Shubh KaranI think you dont have a field named /BIC/XXXXXX in the table from which you are trying to fetch the data. Chech the spelling of the field name and table name.
-
Can not see two fields in Crystal 2008 Developer explorer/designer view
I am currently developing crystal 2008 reports against the salesforce.com database using version 12.0.0.683 CR Developer Full version. I am using an updated driver that was provided in July or Aug 08 in order to view self referencing fields. The problem is that when I try and report against one of the tables (lead history) I cannot view two of the fields (New Value and Old Value)? I can see these two field (New Value and Old Value) in the database expert as the last two fields in the actual table, but the two fields are missing when I go into the explorer/designer view. In Salesforce, these two fields can not be filtered on, but I can export all the values in this table using Salesforece Apex data loader.
Please re-post if this is still an issue to the OnDemand Forum or purchase a case and have a dedicated support engineer work with you directly
-
Query help needed for Sales order panel user field query.
I have a user defined form field on sales order row level called = U_DEPFEEAMT
1, I would like this field to get the value from a field on this sales order row level multiplied by what is in point 2 below. The details of field in point 1 is :
Form=139, item=38, pane=1, column=10002117, and row=1
2. The contents in field 1 should be multiplied by a value coming from another user field linked to OITM master item.
The details of user field attached to OITM is :
OITM.U_DepositFeeON
Appreciate your help.
Thank you.Try this one:
SELECT T0.U_DepositFeeON*$[$38.10002117.number\]
FROM dbo.OITM T0
WHERE T0.ItemCode = $[$38.1.0\]
Thanks,
Gordon -
Unable to capture field values in Master agreement Line Items
I am trying to get the field values from master agreement line items page. I have written the following code to get the line item details which is working fine to capture part number and quantity->
agreementBean = doc.getRootParentIBean();
lineItemCollection = agreementBean.getLineItems();
collectionsize = lineItemCollection.size();
for(i=0;i<collectionsize;i++){
collectionbean = lineItemCollection.get(i);
partNum = ""+collectionbean.getPartNumber() ;
Quantity = ""+collectionbean.getQuantity();
throw doc.createApplicationException(null,partNum + " , " + Quantity );
Now, my problem is that I am unable to capture the following field item values in the master agreement > line items page.
1. Price Unit
2. Unit Price
3. Product Category
4. Plant
Please help me to find the values.
Thankx in Advance.
Su
Edited by: subrataindra on Aug 10, 2010 11:11 AMThis will return the name of the plant.
.getExtensionField("PLANT").get().getDisplayName(session);
Check if this returns the product category
collectionbean.getExtensionField("ITEM_CAT").get().getDisplayName();
This will Return the Price
collectionbean.getExtensionField("PRICE").get().getPrice();
(return type :BigDecimal)
This will return the currency
collectionbean.getExtensionField("PRICE").get().getCurrency;
(Return type:String)
Similarly to retrieve other fields for which there are no standard functions, use .getExtensionField("Field ID")
Hope this helps
Regards,
Immanuel -
Unable to capture Input field value on BSP page
Hi
I have copied ROS (SRM) standard application ROS_PRESCREEN3 into custom and added one input field .
Now when user enters some value in it , i am not able to get that value in my back-hand code.
I have treid the availble code on Fourm , its not working .
Regards
RaulHi ,
I am getting the input field values in my back hand using MVC .
Regards
Raul
Maybe you are looking for
-
I am a very old and experienced Ps/Br professional, but can't get around this. My Bridge CC (on a very nice and fast quad core Windows 7 PC), at some point became very slow. Even in the Essentials layout, just going through the thumbnails (already 10
-
Direct materials in classic scenario - any restriction in backend?
Dear SAP gurus, I have read that when we use classic scenario, procurement for direct materials actually using extended classic. But as per SRM 7 EHP 2 the true classic PO (leading PO in ECC) now possible. I just want to confirm is there any restrict
-
Attachment in a case - CRM 5.0
Hello all, I work with the version CRM 5.0. I would like to attach a document to a case without using knowledge search document. Please advice. Thanks in advance. Best Regards, Elsa.
-
Extending a None Apple Network.
I have 2 airport Express Connected to my Wireless network (D-Link Router). When I try to extend the network each express only finds the other one and not my router and so it is not actually extending it?? Any ideas?
-
Reference report column from another page?
I have a work order report with column link. Upon clicking link, control goes from page 2 to page 3 where I want to show details about components in work order. How do I reference the work order ID (report column on page2) from the query in page 3? I