Secure Communication between SAP R/3 and SAP portal(WAS Java)
Hi All,
We have a requirement where client says ,there needs to be a SSL tunnel established between SAP R/3 and Portal(through ITS) to access R/3 through portal
Do we have to use SSL for that or SNC?I heard SNC is a mechanism which have to be used here since it uses DIAG protocol to connect but not Http.Is it true?Kindly give some more ideas on this.
Other thing is to do this they need to open a port between for using Firewall.Can you guide which SAP port has to be open for this connection?
Thanks In Advance
Regards
Rani A
Hi Rani,
what the ITS Admin is, is explained in the docs to the <a href="http://help.sap.com/saphelp_nw04/helpdata/en/44/28611e0bd26493e10000000a1553f7/frameset.htm">ITS Admin Tool</a>. This also includes how to access it.
Usually specifiying the ABAP backend is done by maintaining the <a href="http://help.sap.com/saphelp_nw04/helpdata/en/44/2b67fe369b060ae10000000a155369/frameset.htm">Global Service File Parameters</a>.
The <a href="http://help.sap.com/saphelp_nw04/helpdata/en/44/2aa8081a3a060ae10000000a155369/frameset.htm">SNC configuration</a> is part of the <a href="http://help.sap.com/saphelp_nw04/helpdata/en/44/2a95a61a3a060ae10000000a155369/frameset.htm">Security Configuration</a> and also done in the ADM instance of the ITS.
Regards,
Patrick
Similar Messages
-
Secure Communication between Weblogic 5.1 and IIS
I have WL5.1 and IIS running on two separate machines. I've installed
SSL certificates on IIS. So the traffic between the browser and IIS is
encrypted.
When the "iisforward" filter is used to forward servlet execute to
Weblogic I get a message on the browser which says "You're about to be
redirected to a connection which is not secure. The information you're
sending to the current site might be retransmitted to a non-secure site. Do
you wish to continue?"
This makes sense as IIS does not know where the filter is forwarding this
data. But how do I get rid of that message? There does not seem to be a way
in 5.1 for the plugin/filter on IIS to communicate securely over SSL to the
Weblogic server.
Thanks,
- AyushCan you give more details on how you configured credentials on jboss end.
post this on jboss forumn as the solution lies in jboss configuration not that of wls. -
Connectivity between SAP ECC system and SAP BI
Connectivity between SAP ECC system and SAP BI
Hi BI-experts!
I would like to load e.g. transaction data from SAP ECC system into SAP BI system.
The Loading process is hanging in processing step u201CSERVICE APIu201D.
The process in hanging in status "yellow" and then changed after a while to status u201Credu201D.
[0FI_AR_4 |http://www.file-upload.net/view-1447743/0FI_AR_4.jpg.html ]
The following steps within Load process are yellow and then red:
Extraction (messages): Missing messages
Missing message: Request received
Missing message: Number of sent records
Missing message: Selection completed
Transfer (IDocs and TRFC): Missing messages or warnings
Request IDoc : Application document posted (is green)
Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished
Info IDoc 1 : sent, not arrived ; Data passed to port OK
Info IDoc 2 : sent, not arrived ; Data passed to port OK
Info IDoc 3 : sent, not arrived ; Data passed to port OK
Info IDoc 4 : sent, not arrived ; Data passed to port OK
Subseq. processing (messages) : Missing messages
Missing message: Subseq. processing completed
DataStore Activation (Change Log) : not yet activated
Question:
Can some one tell me whether my distribution model or other settings are wrong?
I created 2 distribution model (BD64), one from SAP BW system and other from SAP BI system with message types RSRQST, RSINFO, RSSEND
Thank you very much!Hi Holger.
this issue is related to the RFC but not the one which is communicating from BI to R/3 rather the one which is communicating from R/3 to BI follow these steps.
1. check your BI system logical name from the myself source system.
2. go the ECC and run the transaction sm59
3. go the ABAP Connection folder and search for your RFC which name would be by default as per your BI logical system name.
4. double click it and edit it now check whether the Target hostname or ip is OK.
5. In the logon tab check the client number User and password settings.
Save it and test it with both Connection Test and Remote Logon.
if every thing work fine i hope your problem will be solved.
kind regards,
Zeeshan -
Connection between SAP R/3 and SAP XI with RFC
Hi Experts,
I am beginner in SAP XI.
We are using SAP XI 3.0 SP 9 and SAP R/3 4.6 C
I am trying to validate a connection between SAP R/3 and SAP XI with RFC.
I followed all the weblogs ,and i did exactly the same way, but I am unsucessful...
Schema not available Exception
com.sap.aii.af.service.cpa.CPAException: Schema not available for RFC|3b787a8035c111d6bbe0efe50a1145a5|http://sap.com/xi/XI/System.
at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryDataSAXHandler.endElement(DirectoryDataSAXHandler.java:262)
at com.sap.engine.lib.xml.parser.handlers.SAXDocHandler.endElement(SAXDocHandler.java:154)
at com.sap.engine.lib.xml.parser.XMLParser.scanEndTag(XMLParser.java:1826)
at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1722)
at com.sap.engine.lib.xml.parser.XMLParser.scanContent(XMLParser.java:2298)
at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1719)
at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2701)
at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:162)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:126)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:136)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:209)
at com.sap.engine.lib.xml.parser.Parser.parseWithoutSchemaValidationProcessing(Parser.java:270)
at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:331)
at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:125)
at javax.xml.parsers.SAXParser.parse(SAXParser.java:345)
at javax.xml.parsers.SAXParser.parse(SAXParser.java:143)
at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryDataParser.updateCentralCache(DirectoryDataParser.java:54)
at com.sap.aii.af.service.cpa.impl.cache.CacheManager.updateCacheWithDirectoryData(CacheManager.java:713)
at com.sap.aii.af.service.cpa.impl.cache.CacheManager.performCacheUpdate(CacheManager.java:595)
at com.sap.aii.af.service.cpa.impl.cache.CacheManager$CacheUpdateRunnable.run(CacheManager.java:440)
at com.sap.engine.frame.core.thread.Task.run(Task.java:60)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:73)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:145)
Please help me out on this
Thanks in advance
Rajuhi,
try refreshing you CAP cache:
741214 (check this note)
and check if the refresh was successful
(CPA history)
Regards,
michal -
Differences between Product Version SAP ERP 2005 and SAP ECC 6.0
Hello Guys,
I have to setup an new XI interface between two R/3 system. During Integration Scenario setup you have to select under Application Component Type the Product version for the R/3 systems.
Now, i am able to select SAP ERP 2005 or SAP ECC 6.0 from menu
Could someone tell me the differences between SAP ERP 2005 and SAP ECC 6.0. Both are listed as Product Versions.
Thanks in advance!
JochenSAP ECC 6.0 is latest version 2005 is last year version . as you are intergatin between 2 . you need select accordingly our source and target.
let me know you still require any doubt
Thanks
Sreeram
Message was edited by:
Sreeram Reddy -
Difference between SAP 4.7EE and SAP ECC 6.0 in terms of ABAP
Hi all,
I would like to know the differences between the SAP-4.7EE and SAP ECC 6.0 in terms of ABAP?
can any body Please Help me?Hi Vijay,
In terms of ABAP some function modules are obsolete in 4.7.
e.g WS_UPLOAD, WS_DOWNLOAD etc.
You can find the list of obsolete FMs in the table RODIR.
These need to be replaced in the ECC System.
Also ECC is very strict in case of EPC Errors. You need to check the EPC and remove the call function interface errors where it says SLIN observes catching of a runtime error. These might work with no issues in 4.7 but will shortdump in ECC.
If you are doing to a unicode conversion also. you need to check the transaction UCCHECK for unicode errors.
You also need to replace obsolete statements like >< and => , =< etc.
Please let me know if you need any further info on this.
Thanks,
Sai -
How to Reconcile Data Between SAP Source Systems and SAP NetWeaver BI
Hi,
I just read "How to Reconcile Data Between SAP Source Systems and SAP NetWeaver BI". While I'm waiting for more authorisation to r/3 to carry it out and test this functionality.
I'd like to ask a question to anyone who has implemented this type solution. On page 10 it talks about creating a view then setting up the datasource. The solution talks about runnig a query. I suspect when we run a query I would run it for only a period(using variable) to reconcile.
My question is this. Will the datasource extractor on /r3 only select the period in our variable or will it do a full selection of the data which would then be passed to BW for filtering?
RegardsDEar Mark,
There are several avenues where you can see and reconcile your data with source system, u can see data in by tcode RSA3 for a datasource, and compare the values with actual document posted into the R/3 system. Respective fuctional consultant canhelp you a lot to confirm the data.
On BW side u can see the data in PSA and then check tranformations which subsequent change/update/reject data records based on the selective conditions.
hope this helps.
Kindly assign the points if it works.
Revert back if u need futher help/information. -
Verify the data between SAP R/3 and SAP BW
Hi Experts,
How to verify the data between SAP R/3 and SAP BW at the time of data mismatches in reports.
give me the proper solution.
Thanks,
SyamHello,
You must know what is the infoprovider source of the data shown in the report.
Once you know it, check the content filtering by same restrictions as in the mismatch report. Now you have the data in BW.
Then you have to know the proper transation or table in R/3, from where the extractor retrieves the data to populate the infoprovider; make same restrictions and compare it with data in BW.
Regards -
*what is the difference between web flow engine and sap business workflow?*
Hi,
Can any please guide me by telling what is the difference between web flow engine and sap business workflow?>
Arghadip Kar wrote:
> Check this link
>
> http://www.workflowing.com/id35.htm#1__what_is_the_difference_between
... which is exactly where the FAQ item came from! -
Diffrences Between SAP HR workflow and SAP Logistics workflow
Hello All,
Do we need to do any specific configuration settings to be done in the system to work on SAP HR workflow in ECC 6.0?
I am using SWU3 for automatic workflow customizing? But I am getting error indicator for u201CCheck Entries from HR Control Tablesu201D in the Maintain Definition Environment Node.
Are there any major differences between SAP HR workflow and SAP Logistics Workflow?
Regards
VenkatHi Mike,
what can be the impact if Check Entries from HR Control Tables setting are not maintain in the System. caz my workflow is going in waiting status and when i have chacked the container for that element then there in _Workitem.ExecuteByUser-ID is coming as <NOT SET>.
So can you please put some light on this.. that what can be the resion behind this ...?
Is this a Check Entries from HR Control Tables Problem or any other reason..
Thanks & regards
Dev -
Difference Between SAP R/3 and SAP CRM
hi firends,
Iam new to the SAP world.What is the difference between
SAP R/3 and SAP CRM.
What are the additional services provided by the SAP CRM?
How it does differs from R/3?
Can any one guide me.
Thanks in Advance
Ganga PrasadHello,
I think the best start is to look at the:
- <a href="http://www.sap.com/solutions/business-suite/crm/featuresfunctions/index.epx">mySAP Customer Relationship Management: Features & Functions</a>
- <a href="http://www.sap.com/solutions/business-suite/erp/featuresfunctions/index.epx">mySAP ERP: Features & Functions</a>
also the help at http://help.sap.com/ could be very valuable:
- <a href="http://help.sap.com/saphelp_crm40sr1/helpdata/en/1a/023d63b8387c4a8dfea6592f3a23a7/frameset.htm">mySAP Customer Relationship Management</a>
- <a href="http://help.sap.com/saphelp_erp2004/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm">SAP ERP Central Component, Release 5.0, SR1</a>
Regards
Gregor -
Secure Communication between SharePoint and SQL
What are the options of securing the communication between the SharePoint Server and SQL Server?
Is the Kerberos one of the options? Any instructions on how to set it up?Kerberos isn't a way of securing communication. It is a way to authenticate.
If you want to communicate securely then you need to use something like IPSec, see here for a guide:
http://technet.microsoft.com/en-us/library/ms189067%28v=sql.105%29.aspx
Have a look here for guidance on how to harden SQL for SharePoint:
http://technet.microsoft.com/en-us/library/ff607733%28v=office.15%29.aspx -
Difference Between SAP Netweaver 2004 and SAP Netweaver 2004s (7.0)
Dear All,
Could you please list out the differences between SAP Netweaver 2004 and SAP Netweaver 2004s (7.0)?
Thanks,
Rahul BhatHi Rahul,
These threads can give you some insight:
What's it gonna be: NW2004S?
NW2004 vs. NW2004s
Need help on Netweaver 2004 and Netweaver 2004s
/thread/196931 [original link is broken]
difference between 2004 and 2004s?
NetWeaver version question
Bye
Ankur -
Difference between SAP Add on and SAP Plug-in
Dears:
If there any difference between SAP Add on and SAP Plug-in? If the t-code is the same?SAINT?
Edited by: Neeraj Chang on Jan 28, 2009 3:25 PMRead,
http://help.sap.com/saphelp_em51/helpdata/en/4e/6152653359c6478edd0b5b27b64d9c/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/EN/26/5a8c38e3494231e10000009b38f8cf/frameset.htm
Yes, you use SAINT to install both and SPAM to patch them
Regards
Juan -
Difference between SAP 4.6C and SAP ECC6.0
hi ,
Can any one give me the difference between SAP 4.6C and SAP ECC6.0 .
in respect to following points..
Assertions and Breakpoints
New Debugger
New Editor
Run Time Type Services (RTTS)
UnicodeHI Neha ,
ECC->enterprise central component.ECC 6.0 is the advanced version.if we consider in technical point of view then i can give u one example.
In the new version we have enhancement points and enhancement sections along with enhancemnts and BADI'S.SAP has provided these ,so that without going for access keys we can write our code in the enhancement points along with Standard SAP code.So now SAP has provided more user friendly environment.Also a new DEBUGGER also arrived with the new version.Now we can see more things in the new er version of DEBUGGER.
Thanks ,
Ashish Gupta -
Difference between SAP BC ABAP and SAP ABAP Training
What is the basic difference between SAP BC ABAP and SAP ABAP Training ?
Can any one answer these? I am little confused about the learning material I searched on internet and the course provided. It has similar topics but different name. I have course like SAP ABAP ECC 6.0 (TAW10 and TAW12) but on search I also found SAP BC ABAP beside this.Hello
SAP BC means SAP Business Connector
http://help.sap.com/saphelp_nw04/helpdata/en/6f/1bd5c2a85b11d6b28500508b5d5211/content.htm
http://en.wikipedia.org/wiki/SAP_Business_Connector
So you can know SAP BC ABAP is ABAP for SAP BC
SAP ABAP/4 is a program lanuague
https://en.wikipedia.org/wiki/ABAP
For ABAP certification
TAW10 and 12 are the right materials.
Regards
Maybe you are looking for
-
I need to retrieve two recordset from database using two query.....so how do I do that? Whether I need to create two database connection or ....? Anyone pls help....urgent... Thanks in advance
-
Hi guys, Here is my problem, I need to get 200 or so photos off of an old Imac G3. It is the first model so there are some limitations. No cd burner, no firewire, OS 9.2, and only usb 1.1, it was in an electrical accident so the ethernet port is frie
-
How to use Crystal Report with Java - need help
Dear everyone, i am completely new to Crystal report , please can anyone help me to creat a very simple Report using the Crystal report, the report will show some records from oracle DB. How can i make it by a simple example and with code please? do
-
Hi , I have Several Programs Created in ABAP (with Associated TCodes)which i am calling in Portal Using SAP Transation iView. Now i want to convert them in to BSP. Instead of Rewriting the Code , Is there any Tool , Program ,TCode available which wil
-
OAM 11gR1 resource issue.
OAM 11.1.1.5 Webgate: Deny on Not protected is unchecked. So any resource not present in Policy should be accessible. We have following resource protected :- /ResourceRoot/xml/.../* OAM is also protecting resources: /ResourceRoot/xmldef/.../* There m