Secure files on macbook Mavericks

How can I password secure individual data files on a MBP running Mavericks ?

Amrmortagy
You really should start your own thread - nevertheless, see -> http://www.apple.com/support/appleid/.
Clinton
MacBook Pro (15-inch Late 2011), OS Mavericks 10.9.4, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display

Similar Messages

How can I uninstall adobe media encoder cc at macbook (Mavericks)?

How do I uninstall adobe media encoder cc on macbook (Mavericks)? I have installed two versions (AME AME CC and CC 2014), AME CC 2014 has unistall file, but the application AME CC has unistall file or i can not find it. The situation is similar in the application ADOBE EDGE CODE CC and ADOBE EDGE CC Reflow CC.

Because I have installed two versions, CC and CC (2014) I have a small ssd drive, I want to uninstall unnecessary applications and replace them with new ones from the 2014 edition. I have a problem with applications: Media encoder CC, EDGE CODE CC, Rreflow CC, Lightroom 5, these applications just do not have the files "uninstall". CC Photoshop, Illustrator CC, InDesign CC, Media Encoder CC (2014) - with these applications I do not have a problem, I can uninstall these applications because have files "uninstall".

Security Update 2014-002 Mavericks problem.

I need help. After getting an update notice (Security Update 2014-002 Mavericks. ) I decided to update. It asked me to restart my mac so I clicked yes. And then left it to run. I came back to the mac and it was turned off. I then pressed the power button. Boot up tone came on screen lit up and then a gray apple sign comes up followed by the gear load symbol and after that followed by a load bar. The load bar starts then after like 5% it stops and then Turns off. This happens every time. I've tried opening it in safe mode it still does the same thing. Can anyone explain what the **** is going on.
I have no access to my mac at all.
Please help.

Joebaker00,
boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Is it able to get to the login screen now?

Nas can not access secure parts from Macbook pro

Black Armor 220 nas can not access secure parts from Macbook pro, although access sucess Public parts (no password), is any setting in Lion or else needed setup?
Late 2006 model , 15'

is any network sharing files Setting for secure files sharing in a NAS(wifi with mac via internet gateway), or to be able access Public files (but not secure), the password must be the problem?

How can I access files from a flash drive that were previously saved using a Windows computer? When I attempt to open the file on MacBook Pro, it is asking to "convert file to"; I also have Microsoft Word installed on the Mac as well.

How can I access files from a flash drive that were previously saved using a Windows computer? When I attempt to open the file on MacBook Pro, it is asking to "convert file to"; none of the options I choose work. I also have Microsoft Office (with Word) installed on the Mac as well.

Format the external drive as FAT32 or ExFAT. Both computers will then be able to read and write to it.

Lookout 6.6 - Logon Error: Security file does not exist

I'm trying to run Lookout 6.6 evaluation. It loads fine, I get a message saying that it's running evaluation version. I press OK to clear that box and a logon window opens. It's filled in with the default settings, Administator, local doman, no password. I click Log On and it gives me the error which is in the subject line, security file does not exist.
I've read on here that the lookout.sec file doesn't exist in the System32 folder. In this case, I've found it and it's there.
I've trying different user names, I took the .sec file and copied it in various locations: windows folder, and the programs root folder - obviously there was no effect. I tried editing the lookout.ini file to remove the log on information to see if that clears it up (even deleted the file to see if that work), but to no avail. I also tried re-installing the program, but there is no uninstall button - windows program removal tool cannot even remove, modify, or repair the program. I ran the install a couple of times as well.
Does anyone know what I can do?
Here's what I'm running:
(I bought this computer today)
Windows 7 x64-bit Home Premium
4gb ram
500gb hard drive
It's very minimal, since all the computer is meant to do is run this program and replace the computer Lookout 5.0 was running on (mobo got fried).
- Please - let me know if you have any suggestions.
Solved!
Go to Solution.

Hi Mike! Thanks for replying!
I've just tried it in admin mode and it hasn't worked. I've also tried using compatability mode, but to no avail.
I downloaded the lookout 6.2 version to try and it gives me the same error as well.
Another thing to note, I tried uninstalling it (either lookout 6.6 or 6.2 doesn't matter), but all options it gives (modify, repair, and uninstall) are all greyed out.
Any thoughts/ideas?

Solaris 8, 9 and 10 Security Files

Good Morning:
I am hoping that someone out there can confirm the following scenario:
I want to use a standardized set of security files for all my operating systems Solaris 8, 9, and 10. The files from Solaris 10 and are listed below:
/etc/default/passwd
/etc/default/login
/etc/security/policy.conf
The questions I have are as follows:
1. With the understanding that some of the security features may not work in Solaris 8 or Solaris 9, is there a problem in using these files across the all Operating systems?
2. Are there any known issues with this approach?
Mark K.

Lars,
Use ldmp2v to convert existing physical server to VM and
Convert Solaris 8 and 9 physical servers to container in Solaris 10 VM?
Is that what you are saying?
Major constraint I have is, applications running in the current physical servers have no vendor support, vendor doesn't exist any more. Application has been locked to run only on the same OS version. What I am worried is, while running ldmp2v should not prevent the application coming up in the new virtualized environment. Keeping that in mind, I gave a thought like
1. Install and configure the CDOM (control domain)
2. configure and Install LDOMs with Solaris 10 OS
3. Run flar on the existing Solaris 10 physical server
4. Transfer the flar created to Solaris 10 LDOM and configure it as a zone
5. For Solaris 8 and 9, create LDOMs with Solaris 10 OS
6. Install additional patches and packages needed for supporting Solaris 8 and 9 zones
6. create flar images on the existing Solaris 8 and 9 physical servers
7. transfer the images to newly created LDOM and configure the zone.
8. Current servers sun4u which has to be converted to sun4v.

How to transfer a 8GB .MOV file from MacBook Air (late 2013) via external HD (Samsung S2 Portable) to a Dell laptop ?

Hi guys and galls,
How can I transfer a 8GB .MOV file from MacBook Air (mid 2013) via external HD (Samsung S2 Portable) to a Dell laptop ? The mentioned file currently will not let me transfer it to my ext HD. I want to upload it afterwards to a Dell laptop with Windows software installed.
Reformatting the drive doesn't seem to be the sollution, since this will erase all the data stored on the ext HD, and it will only allow me to use the drive with either Apple or Microsoft equipment.
Please HELP, running out of options here... Thnx, "Apple-Dummy"

Apple-Dummy wrote:
How can I tell whether my External HD is formatted NTFS?
Attach the HDD to your MBP. Click on the icon on the desktop COMMAND+I. It will produce a display such as this and look what it says by FORMAT.
How do I format my External HD: FAT or ExFAT?
Do this on a PC. You will have to use the Windows equivalent of Disk Utility. I am not a Windows user so I cannot give you detailed information regarding this. I have seen on these forums that there are at times compatibility problems if formatted on a Mac.
Which one is preferred, FAT or ExFAT? And why?
Use ExFAT. FAT has a file size limitation of 4 GB.
Ciao.

Internet security for my macbook pro

need some advice do i need internet security for my macbook pro it has been sugested that apple devices dont get virises? if so thats the best one to buy

You don't need any.

How to transfer files from MacBook Pro pages app to iPad mini pages app?

How to transfer files from MacBook Pro pages app to iPad mini pages app?

The above assumes you are running current software.
Mac - OX X 10.9.2, Pages 5.1.
iPad - iOS 7.0.6, Pages 2.1.

Error when loading security file .sec

Hi
I am getting error when tried to load security file
Below is extract of security file
!FILE_FORMAT=2.0
!VERSION=11.12
!USERS_AND_GROUPS
Praveen@Native Directory
admin@Native Directory
!SECURITY_CLASSES
[Default]
123
!ROLE_ACCESS
Provisioning Manager;Praveen@Native Directory
Journals Administrator;Praveen@Native Directory
Advanced User;Praveen@Native Directory
Data Form Write Back from Excel;Praveen@Native Directory
Inter-Company Transaction Admin;Praveen@Native Directory
Provisioning Manager;admin@Native Directory
Application Administrator;admin@Native Directory
!SECURITY_CLASS_ACCESS
123;Praveen@Native Directory;All;N
i want to add a user and wan to give provision in the above security file .sec (without doing it in Sharedservices )
for the above security file i have added balaji and loaded it to HFM its not working.
!FILE_FORMAT=2.0
!VERSION=11.12
!USERS_AND_GROUPS
Praveen@Native Directory
balaji@Native Directory
admin@Native Directory
!SECURITY_CLASSES
[Default]
123
!ROLE_ACCESS
Provisioning Manager;Praveen@Native Directory
Journals Administrator;Praveen@Native Directory
Advanced User;Praveen@Native Directory
Data Form Write Back from Excel;Praveen@Native Directory
Inter-Company Transaction Admin;Praveen@Native Directory
Provisioning Manager;balaji@Native Directory
Journals Administrator;balaji@Native Directory
Advanced User;balaji@Native Directory
Data Form Write Back from Excel;balaji@Native Directory
Inter-Company Transaction Admin;balaji@Native Directory
Provisioning Manager;admin@Native Directory
Application Administrator;admin@Native Directory
!SECURITY_CLASS_ACCESS
123;Praveen@Native Directory;All;N
123;balaji@Native Directory;All;N
Can we add users and give provision in security file without creating user in shared services ?
Thanks

If you have your application built using MSAD, then you an load the file the way you built it above, however because you're using the NativeDirectory, you need to create the user in the Directory(HSS) first. Once the user is created, you can then go through and use the .sec method to assign access/roles, but the actual user creation can't be done through a load file.
One of the easiest reasons to understand why this can't be done is that when you load the .sec file, you're not setting up a password for the user.

How can i remove secure files from the trash? I tried click away the secure notification in info, but still i cann't remove them. Is there a buttoncombination to use?

How can i remove secure files from the trash? I tried click away the secure notification in info, but still i cann't remove them. Is there a buttoncombination to use?

If you are unable to empty the trash, try holding the Option key while selecting Empty Trash.
Otherwise, some steps in the following link may help you.
http://support.apple.com/kb/ht1526

How to configure java.security file to run j2ee programs

Hi,
I am using Sun one application server to run my j2ee programs.
plz tell me how to configure java.security file inside my appserver so that i can run my servlet program that is using jsse API to create SSL sockets.
I am not able to follow whats there in java.security file.Kindly tell how to configure it.
Waiting for ur replies!
Thanks,
Akshatha

Hi,
I am using Sun one application server to run my j2ee programs.
plz tell me how to configure java.security file inside my appserver so that i can run my servlet program that is using jsse API to create SSL sockets.
I am not able to follow whats there in java.security file.Kindly tell how to configure it.
Waiting for ur replies!
Thanks,
Akshatha

Is it possible to override Java.security file

Hi,
Is there some property which we can pass with -D argument to JVM to specify a custom java.security file, similar to the way we can specify a custom policy file using "java -Djava.security.policy".
My actual requirement is to insert a new Provider which I do not want to do by adding add/insertProvider in my code, nor do I want to change the file
Any workarounds??

Yes:
java -Djava.security.properties=<url> ...
If you use a double equals (==) then you just get the specified property file. If you use a single equals (=) then it appends to the default property file (overwriting duplicate entries with the values in the specified property file).

Downloaded firefox 4 yesterday...everytime i start it...it says something about unable to initialize security file or something to that effect...i have recently uninstalled....what is problem

when i try to open firefox 4,it wont open but a window opens up saying it couldnt initiate security file....then opens to a blank page and doesnt work...would also freeze up when it worked the very few times

This link should help - https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component

Secure files on macbook Mavericks

Similar Messages

Maybe you are looking for