Secure link to iTunes unsuccessfull on only one user account ?

I keep recieving the message in  the iTunes store diagnostics that  " secure link to iTunes unsuccessfull " , but only on one user account.
Other connections are O.K.
Help ?

Scorpion Sting, however, when I change user account on my machine, it's back to its normal fast speed.
Here's the whole litany for thoroughly checking your home folder.
1. Navigate to ~(YourHome/Library/Fonts - drag this folder to the desktop.
• Restart and test your applications.
• If they work start adding the fonts back few at a time.
( Likely suspects are Times RO & Helvetica Fractions, also if you do not use Classic you can trash the classic fonts.)
2. Check Preferences Thoroughly;
• Navigate to ~(YourHome/Library/Preferences drag this folder to the desktop.
• Restart and test your applications.
• If this works, save the old preferences folder somewhere else or on disk, name it "old prefs" .
** Note: A very important file is the "com.apple.Mail.plist" preference file located in the Preferences folder which contains all email account settings and general mail preferences (hold this one and replace if your problem is not with Mail).
You'll have to go through some of your System Preferences and apps to set the preferences back to how you like them. (Or if you have the time and inclination, "cherry pick" through until you find the problem one or two.)
3. Check Permissions Inside Home Folder
• Navigate to YourHome/Library.
• Get Info (Command - i) on folders for apps you are having problems with.
• Open the "Ownership & permissions" disclosure triangle.
• Make sure you are the owner, with "read and write" access.
• Click on "apply to all"
• If this is correct, open the "Applications Support" folder and do the same procedure (Command+I) for the folders with the names of the applications you are having trouble with.
Note:
The reason to check this is because repairing permissions with Disk Utility doesn't touch permissions inside your home folder.
4. Navigate to YourHome/Library/Caches and drag this folder to the trash, then log out and back or restart. There is no need to replace this folder.
-mj
[email protected]

Similar Messages

  • Itunes not working in one user account

    I'm running OSX 10.6.8 and the latest iTunes software. My iTunes has stopped working on one user account only, the menu is completely greyed out and will not function when launched. To quit iTunes I have to use force quit. I've tried deleting the plist preferences, re-installing iTunes from a back up and also re-installing from new, but the same fault persists. Any suggestions or help would be greatly appreciated.

    Delete all gnome config files before (the .gnome* directories) and also caches and session config (somewhere in .config directory). You will lost all application config, but I do it from time to time and it solves even some application bugs.

  • Limiting iTunes and QuickTime to one User Account in WinXP

    I'm the Dad and the admin on my XP machine.
    I have 3 non-admin accounts for the kids.
    Only 1 kid has an iPod and uses iTunes.
    No one else uses or needs iTunesHelper, iPodService, or QTTASK.EXE.
    I know that I can kill each service inidividually from Task Manager, but the non-admin accounts can't. They suffer the slowdown caused by these services running from the background and constantly going out to the web for un-needed and unwanted activities such as checking the Apple Store, etc.
    I don't want this behavior.
    I want to prevent these services from loading and running for all User Accounts except the one.
    Please give me steps to limit these services!!!
      Windows XP  

    As far as I can tell, this is NOT a solution.
    As I try to allow the one User Account to load and run the services, ALL accounts are forced to load and run them.
    As I try to disable the services from loading and running on other accounts, they won't load and run on the one User Account that I want them to.
    Does ANYone know of a way to disable iTunes, iPodHelper, and qttask from loading on selected User Accounts?
      Windows XP  

  • App lags/crashes in only one user account

    No test repos enabled,  Gnome desktop.
    Nautilus file browser is slow and will crash while opening some folders.
    Same issues with GTK pacman.  (only used for looking at packages. all package manipulation with pacman cl)
    This problem started over a month ago and only recently I'm trying to troubleshoot it.
    If I log in as test user or root, everything runs as it should.
    Would switching between the following  64bit packages to lib32 and  back to 64bit  possible create application problems in one user account?
    gnutls gcc-libs glib glibc glibgtk gtk gtk2 etc
    I have tried reinstalling packages including nautilus and even gnome desktop and gnome extras, removed any ~/ .nautilus files I could find etc.
    Any suggestions would be more than welcome other that creating a new user account.....that would be easy but I wouldn't learn a thing...
    I have searched and found many similar nautilus issues dating back several years, but the fix was usually package updates or reinstall nautilus.
    I have filed a bug at bugzilla gnome, but still trying to find a solution in the meantime.
    gdb nautilus <PID>
    (gdb) thread apply all bt
    Thread 2 (Thread 0x7f9965771700 (LWP 1994)):
    #0 0x00007f996ee6c3e3 in poll () from /lib/libc.so.6
    #1 0x00007f99701a7134 in g_main_context_poll (context=0x14c8a10, block=1,
    dispatch=1, self=<value optimized out>) at gmain.c:3093
    #2 g_main_context_iterate (context=0x14c8a10, block=1, dispatch=1,
    self=<value optimized out>) at gmain.c:2775
    #3 0x00007f99701a7a42 in g_main_loop_run (loop=0x14c8af0) at gmain.c:2988
    #4 0x00007f997149e144 in gdbus_shared_thread_func (data=<value optimized out>)
    at gdbusprivate.c:277
    #5 0x00007f99701cdf56 in g_thread_create_proxy (data=0x14c8b10)
    at gthread.c:1897
    #6 0x00007f996f108c60 in start_thread () from /lib/libpthread.so.0
    #7 0x00007f996ee747ed in clone () from /lib/libc.so.6
    #8 0x0000000000000000 in ?? ()
    Thread 1 (Thread 0x7f997325b760 (LWP 1954)):
    #0 g_atomic_pointer_get (atomic=0x14752b8) at gatomic-gcc.c:78
    #1 0x00007f9970ac1e23 in lookup_iface_entry_I (
    instance_class=<value optimized out>, iface_type=<value optimized out>)
    at gtype.c:561
    #2 type_lookup_iface_vtable_I (instance_class=<value optimized out>,
    iface_type=<value optimized out>) at gtype.c:616
    ---Type <return> to continue, or q <return> to quit---
    #3 g_type_interface_peek (instance_class=<value optimized out>,
    iface_type=<value optimized out>) at gtype.c:3099
    #4 0x00007f9971deecb0 in IA__gtk_tree_model_iter_has_child (
    tree_model=0x188a930, iter=0x7fff08de6360) at gtktreemodel.c:1251
    #5 0x00007f99696d02ff in count_rows (model=0x188a930,
    iter=<value optimized out>, end_path=0x1ae4390, count=0x7fff08de643c,
    level=2, depth=3) at gailtreeview.c:4436
    #6 0x00007f99696d031c in count_rows (model=0x188a930,
    iter=<value optimized out>, end_path=0x1ae4390, count=0x7fff08de643c,
    level=1, depth=3) at gailtreeview.c:4437
    #7 0x00007f99696d0558 in get_index (tree_view=0x1640760,
    path=<value optimized out>, actual_column=0) at gailtreeview.c:4374
    #8 0x00007f99696d3e4a in cell_info_get_index (tree_view=0x1640760,
    index=0x7fff08de6538, info=<value optimized out>) at gailtreeview.c:4142
    #9 0x00007f99696d4430 in find_cell (obj=0x184e200, i=103)
    at gailtreeview.c:4193
    #10 gail_tree_view_ref_child (obj=0x184e200, i=103) at gailtreeview.c:835
    #11 0x00007f996949d030 in ?? () from /usr/lib/gtk-2.0/modules/libatk-bridge.so
    #12 0x00007f9970ab1151 in signal_emit_unlocked_R (node=<value optimized out>,
    detail=434, instance=0x184e200, emission_return=0x0,
    instance_and_params=0x7f994c1aa770) at gsignal.c:3218
    #13 0x00007f9970abac85 in g_signal_emit_valist (
    instance=<value optimized out>, signal_id=<value optimized out>,
    ---Type <return> to continue, or q <return> to quit---
    detail=<value optimized out>, var_args=<value optimized out>)
    at gsignal.c:2983
    #14 0x00007f9970abb012 in g_signal_emit_by_name (
    instance=<value optimized out>,
    detailed_signal=0x7f99696dc055 "children_changed::add") at gsignal.c:3077
    #15 0x00007f99696d332d in model_row_inserted (
    tree_model=<value optimized out>, path=<value optimized out>,
    iter=<value optimized out>, user_data=<value optimized out>)
    at gailtreeview.c:2903
    #16 0x00007f9970a9febe in g_closure_invoke (closure=0x7f994c08a660,
    return_value=0x0, n_param_values=3, param_values=0x7f994c1aa6d0,
    invocation_hint=0x7fff08de6c10) at gclosure.c:766
    #17 0x00007f9970ab1a12 in signal_emit_unlocked_R (node=<value optimized out>,
    detail=0, instance=0x188a930, emission_return=0x0,
    instance_and_params=0x7f994c1aa6d0) at gsignal.c:3322
    #18 0x00007f9970abac85 in g_signal_emit_valist (
    instance=<value optimized out>, signal_id=<value optimized out>,
    detail=<value optimized out>, var_args=<value optimized out>)
    at gsignal.c:2983
    #19 0x00007f9970abae53 in g_signal_emit (instance=<value optimized out>,
    signal_id=<value optimized out>, detail=<value optimized out>)
    at gsignal.c:3040
    #20 0x00007f9971df92a1 in gtk_tree_model_sort_row_inserted (
    ---Type <return> to continue, or q <return> to quit---
    s_model=<value optimized out>, s_path=0x7f994c17c580,
    s_iter=<value optimized out>, data=0x188a930) at gtktreemodelsort.c:691
    #21 0x00007f9970a9febe in g_closure_invoke (closure=0x7f994c03fd50,
    return_value=0x0, n_param_values=3, param_values=0x7f994c1aa680,
    invocation_hint=0x7fff08de7110) at gclosure.c:766
    #22 0x00007f9970ab1837 in signal_emit_unlocked_R (node=<value optimized out>,
    detail=0, instance=0x17b96e0, emission_return=0x0,
    instance_and_params=0x7f994c1aa680) at gsignal.c:3252
    #23 0x00007f9970abac85 in g_signal_emit_valist (
    instance=<value optimized out>, signal_id=<value optimized out>,
    detail=<value optimized out>, var_args=<value optimized out>)
    at gsignal.c:2983
    #24 0x00007f9970abae53 in g_signal_emit (instance=<value optimized out>,
    signal_id=<value optimized out>, detail=<value optimized out>)
    at gsignal.c:3040
    #25 0x00000000004a1338 in report_row_inserted (model=0x17b96e0,
    iter=0x7fff08de7430) at fm-tree-model.c:622
    #26 0x00000000004a147d in report_node_inserted (model=0x17b96e0,
    node=0x7f994c1b0140) at fm-tree-model.c:689
    #27 0x00000000004a2591 in insert_node (model=0x17b96e0, parent=0x1bac790,
    node=0x7f994c1b0140) at fm-tree-model.c:880
    #28 0x00000000004a294e in process_file_change (
    directory=<value optimized out>, changed_files=<value optimized out>,
    ---Type <return> to continue, or q <return> to quit---
    callback_data=0x7f994c03fd80) at fm-tree-model.c:1015
    #29 files_changed_callback (directory=<value optimized out>,
    changed_files=<value optimized out>, callback_data=0x7f994c03fd80)
    at fm-tree-model.c:1029
    #30 0x00000000004b742e in nautilus_directory_monitor_add_internal (
    directory=0x16281e0, file=0x0, client=<value optimized out>,
    monitor_hidden_files=0, monitor_backup_files=0, file_attributes=259,
    callback=0x4a28a0 <files_changed_callback>, callback_data=0x7f994c03fd80)
    at nautilus-directory-async.c:778
    #31 0x0000000000505b49 in vfs_file_monitor_add (directory=0x16281e0,
    client=0x17b96e0, monitor_hidden_files=0, monitor_backup_files=0,
    file_attributes=259, callback=0x4a28a0 <files_changed_callback>,
    callback_data=0x7f994c03fd80) at nautilus-vfs-directory.c:106
    #32 0x00000000004a212e in start_monitoring_directory (model=0x17b96e0,
    node=0x1bac790) at fm-tree-model.c:1133
    #33 update_monitoring (model=0x17b96e0, node=0x1bac790) at fm-tree-model.c:1476
    #34 0x00000000004a2053 in update_monitoring (model=0x17b96e0, node=0x1a59fc0)
    at fm-tree-model.c:1474
    #35 0x00000000004a2053 in update_monitoring (model=0x17b96e0,
    node=0x7f994c08aba0) at fm-tree-model.c:1474
    #36 0x00000000004a2a7b in update_monitoring_idle_callback (
    callback_data=<value optimized out>) at fm-tree-model.c:1489
    #37 0x00007f99701a6bf3 in g_main_dispatch (context=0x14373f0) at gmain.c:2149
    ---Type <return> to continue, or q <return> to quit---
    #38 g_main_context_dispatch (context=0x14373f0) at gmain.c:2702
    #39 0x00007f99701a73d0 in g_main_context_iterate (context=0x14373f0, block=1,
    dispatch=1, self=<value optimized out>) at gmain.c:2780
    #40 0x00007f99701a7a42 in g_main_loop_run (loop=0x162a0d0) at gmain.c:2988
    #41 0x00007f9971d0f8f7 in IA__gtk_main () at gtkmain.c:1237
    #42 0x0000000000441867 in main (argc=1, argv=0x7fff08de7b78)
    at nautilus-main.c:544
    (gdb)
    Last edited by jeff story (2011-01-17 00:04:01)

    Same issue described in another topic: https://discussions.apple.com/message/20368268#20368268
    Confirming this is still issue with 10.8.2 (MacBook Pro Retina 15"), network disk connected to AirPort Extreme.

  • Sharing iTunes library/playlist, only one user can run iTunes

    Greetings everyone
    Just got a new aluminum iMac, setting it up for the wife and kids. From the descriptions here, I have set up several accounts to share a single iTunes library, by creating aliases in each user's iTunes folder that point to the shared library. It seems to work great: I only have to import music ONCE (instead of once for each user), and if one user creates or changes a new playlist, everyone sees it, which is exactly what I wanted.
    However, I have run into a small problem, and it is this. Under this setup, with everyone sharing the same library, *only one person can be running iTunes at a time.* If user A is running iTunes and doesn't quit the app when the computer is switched to User B or C, they get the message
    ----- +"The iTunes Library is locked, on a locked disk, or you do not have write permission for this file."+
    ----- Switch back to User A, quit iTunes, and then the others can launch iTunes fine (though again, just ONE of them). Same behavior regardless of whether the user is admin or not.
    So, is there any way to enable more than one user to run iTunes at once under this shared scenario? I'm thinking iTunes may not allow multiple users to access the library file at once, so it may be necessary to have users quit iTunes or log out before switching accounts. Let me know if there is a workaround or if anyone has gotten this to work....
    Thanks in advance!
    sno-man

    Hi, I just read your post here - I'd like to do exactly what you were able to do, that is, sharing one iTunes library with multiple user accounts on my iMac so that we can both use/add to the same library (I also want to do this with iPhoto, so I'm assuming it's the same process); would you mind quickly telling me how you were able to do this? I've been checking around and can't find a reliable answer. I'd appreciate it - thanks!

  • Multiple user folders, only one user account

    Hello everyone,
    I recently had to reformat my Macbook and reinstall. In the Macintosh HD/users folder are three folders: one with an icon of a little house with my computer's short name, another called Shared and another with my first and last name.
    In System Preferences/Accounts, I only have one user. Whenever I use the finder to drag and drop a file into, say, Movies, it drags it into the second user folder ie. not the one with the little house icon. Consequently, Front Row cannot find my avi's and iTunes cannot find my music.
    While I can (and have) simply transfer all my files from one folder to another, it doesn't explain where this extra user came from and why it seems to have control over the Pictures, Movies and Music folders on the left hand side in Finder while the account that I'm logged in on is somehow secondary.
    I really don't want to have to reformat my machine again. How do I delete this second user safely? Where did it come from?
    Any help would be greatly appreciated.
    Thanks a million
    Dave

    Some ways that you can end up with extra user folders are:
    You migrated data from an older computer using the migration assistant or target disk mode.
    If that is not the case then what has happened is that you done an archive and install not preserving user and network settings but then that folder should be located in a previous system folder.
    The most likely scenario, is however, that you somehow managed to rename your home folder.
    When that happens and you restart your computer the system will look for a folder with your username, that name on your computer, is the name on the folder that has the home icon.
    If a folder with that name is not found a new user folder will be created, it will however, not contain any of your current data files.
    Open the folder which does not have the home icon and check for your user data.
    If it contains your user data you need to rename it back to the name of the home folder with the icon.
    It is not that simple though since you can't have 2 folders with the same name.
    So move the folder with the home icon into shared.
    Now rename the other folder to its proper name.
    Then log out and when you log back in you will be logged into the other user folder with your data.
    If you created any files under the new user folder you can retrieve them from the folder you dragged into Shared and you will note that it no longer has the home icon.

  • Only One User Account Per Client Computer

    I am definitely a newbie, so please excuse my lack of knowledge.  I am the principal (unfortunately, also the head of the tech department) of a small international school in Indonesia.  We are trying to set up a network using a MacMini using Mavericks 10.9.5 running server 3.1.2.  We have created an Open Directory and when the computers (iMacs running Mavericks 10.9.5) first turn on each client will successfully log-in the first user account of the day.  When the user logs out of the client and another user tries to log-in, they receive a message that says that the "home folder for user "xxxxx" isn't located in the usual place or can't be accessed".  The user cannot open any apps, but they can connect to the server and see their home folder.  Restarting the computer allows the new user to log-in successfully.  This forum has been immensely helpful on our journey, but I can't seem to find a similar problem.  I feel the solution will be as easy as checking a box, but I cannot figure it out.  Thanks in advance for your advice.

    Sorry no one responded to you; don't know why.
    But for future reference, you wouldn't need to deauthorize anything. All you need to do is go to the iTunes Gift Card link on the main iTunes Music Store page (in iTunes), enter in the code for the card, and when offered the opportunity, create a new account (assuming you haven't already created one for yourself with a credit card).
    Then you just need to make sure that the appropriate person is logged in to the iTMS. The login link is that the upper-right of the ITMS window. If the wrong person's ID is shown, log that user out and log in with the appropriate person's info.
    And there's no authorization at all on music you've imported from CDs. So nothing you do with the iTMS will have any effect on such tracks.
    Anyway, sorry no one responded, but now you know, at least.

  • I have three user accounts on one computer. On only one account when I when I check Help - About fire fox only one user account says apply update and won't apply. The other two work fine.

    One of three user accounts on the same computer appears to not be updating to 8.0.1 correctly. One admin and one none admin user account says it is up-to-date. The other non-admin user account, under Help About Firefox says apply update, but won't.

    As long as you installed MS Office into its default location (the top level /Applications folder) it will be available to all user accounts on the Mac.
    As far as licensing is concerned you only have to enter the license code once, which you should do right after installing MS Office, in the same admin account you installed it from, by opening any one of the MS Office applications.  There is no additional licensing required for additional user accounts on the same Mac.
    Each user account is able to run the Office apps.  The only thing you will have to do is go through an initial setup screen in each user account (but this setup does NOT involve entering any additional license codes).
    You may have problems if you installed MS Office in a particular user account (i.e. NOT in the top level /Applications folder).

  • Unable to install iTunes for more than one user account on same PC

    My sister and I have different user accounts on our PC. I recently just got an iPod nano, while she has owned one for a few months. After I installed iTunes on my account, it erased iTunes on her account and deleted all of her iTunes playlists. Why is this happening and how can I install iTunes on both our accounts without deleting the other?
      Windows XP  
      Windows XP  

    Hello,
    I am having the exact same problem. I was hoping to find this problem before starting a new forum. My problem is a little bit different (Widows XP). I have my account with my Nano, then my wife has a shuffle. I want to find out how to get two libraries or programs for the same use, but for two completely different iPods. Can you help? Any information will greatly make my life easier. Please keep me in the loop. Thank you!

  • LogicExpress 9.1.8 crashes in only one user account

    LogicExpress 9.1.8 crashes when loading in just one of three user accounts.  Already tried deleting the preferences file.  Works fine in the other two accounts.  I'm still using OSX 10.6.8.

    Thanks. Well vs 3.6.8 is the latest FF. There is no Flash Player at all for any 64bit system. You must use the 32bit browser when Uninstalling/Installing and viewing Flash Content.
    For that to happen so suddenly sounds like some update of a program, Windows update, an Anti-Virus update had taken place. Any new program Installed or Uninstalled? Anything you can think of prior to that happening? It just sounds like a major conflict.
    You may want to take a look at your Flash files, perhaps some Flash file didn't get Installed properly.
    Go to C:\Windows\SysWOW64\Macromed\Flash  Open Flash and post back the files listed there. The NPSWF file(s) need a right click and then click on Properties to obtain the version number(s)
    Also go to Tools, manage add ons with IE and find Shockwave Flash Object..ActiveX Control..Flash10h.ocx and make sure it is Enabled.
    Using FF find the SWF vs 10.1.53.64 plug-in and make sure it is Enabled.
    Perhaps when FP crashed it caused something to change in both of the add ons.
    I had that happen to me a few months ago; Uninstalled an Anti-Virus/Installed a new version. Then couldn't see images on a website, and went to an Adobe website to check something and it told me I needed Flash Player to view it!!! Imagine my surprise:-) So that was the problem.
    Thanks,
    eidnolb

  • No Sound in Flash Player under only one User Account

    Hi I searched the forums and could not find the answer to this.
    I have a Freshly Installed Windows 7 Ultimate (64 bit) version with the latest Flash Player (10.1).
    The browser doesn't matter, both Firefox and IE have the same behavior.
    No sound comes from flash at all under the admin account. Under other user accounts, the sound is fine.
    The sound WAS working fine until one time it said that Flash Player had crashed. I uninstalled, rebooted, re-installed with no luck.
    So I'm either gonna just make another user account... or just wipe the computer and start over unless anyone has any ideas.
    -Marc

    Thanks. Well vs 3.6.8 is the latest FF. There is no Flash Player at all for any 64bit system. You must use the 32bit browser when Uninstalling/Installing and viewing Flash Content.
    For that to happen so suddenly sounds like some update of a program, Windows update, an Anti-Virus update had taken place. Any new program Installed or Uninstalled? Anything you can think of prior to that happening? It just sounds like a major conflict.
    You may want to take a look at your Flash files, perhaps some Flash file didn't get Installed properly.
    Go to C:\Windows\SysWOW64\Macromed\Flash  Open Flash and post back the files listed there. The NPSWF file(s) need a right click and then click on Properties to obtain the version number(s)
    Also go to Tools, manage add ons with IE and find Shockwave Flash Object..ActiveX Control..Flash10h.ocx and make sure it is Enabled.
    Using FF find the SWF vs 10.1.53.64 plug-in and make sure it is Enabled.
    Perhaps when FP crashed it caused something to change in both of the add ons.
    I had that happen to me a few months ago; Uninstalled an Anti-Virus/Installed a new version. Then couldn't see images on a website, and went to an Adobe website to check something and it told me I needed Flash Player to view it!!! Imagine my surprise:-) So that was the problem.
    Thanks,
    eidnolb

  • Mac Mini display is too large for screen on only one user account

    Okay, so I left my two year olds alone for a minute playing the "alphabet game" on my Mac Mini. They only had the keyboard, no mouse but managed to muck up my display leaving me a bit frustrated.  The screen is now too large for my Samsung display. The only way to see everything (dock, top bar, etc) is to move my mouse arrow to the end of my display and see it roll back onto the page.  I've checked the settings there and they are fine. The MacBook Pro plugs right in and is proper resolution. So I then wondered if another account on the Mac Mini would do the same thing. I logged out of my Admin account and into another and everything looks just dandy. I log back into my Admin account and it's too large and blurry again. The resolution is set correct at 1920x1080 at 60 Hz.
    What button did they push on my keyboard that would do this and how do I get it back?? Aargh! Thanks all!

    Ha, figured it out myself from another discussion forum finally. Thoght I'd share in case anyone else runs into this. They must have hit "Zoom" by htting the "Control" and scroll buttons at the same time..
    Resolution:
    You can zoom out by holding down the Option and Command buttons on the keyboard and, while you hold them down, pressing the - key. 

  • Only one user at a time

    I'm looking for help.
    I have two user accounts on my iMac. Both have their own iTunes library file but these both reference to a shared store of music files (to avoid duplicates). I would now like to move this shared music to an external HDD attached to my TC.
    My problem is this. If user 1 first accesses the external HDD then when user 2 tries to do so there is a little red icon on the folder and permission is denied. If I disconnect all users from the TC and then retry with user 2 the problem is reversed. It seems to me that only one user account is allowed to access a TC external HDD at a time. Is there any way around this?
    In case anybody asks, my reason for moving the files is that I am hoping to buy a Sonos music system, which can read iTunes music from the TC as though it were an NAS, even if the computer is off.

    I think you're being misled a bit by the interface: the checkbox labelled "Strict locking" doesn't just allow strict locking, it requires it (and thus disallows byte-range locking). That is, with strict locking enabled, any client that tries to lock any part of the file actually locks the entire file. Access normally depends on byte-range locking to allow different clients to share the database (as long as they aren't trying to modify the same part of it at the same time), but with strict locking the first client locks all others out.

  • Tacacs authentication fails for one user account for only one switch

    Hi,
    I am having an scenario, where as Tacacs authentication fails for one user account for only one switch.
    The same user account works well for other devices.
    The AAA configs are same on every devices in the network.
    Heres the show tacacs output from the switch where only one user account fails;
                  Socket opens:        157
                 Socket closes:        156
                 Socket aborts:        303
                 Socket errors:          1
               Socket Timeouts:          2
       Failed Connect Attempts:          0
            Total Packets Sent:       1703
            Total Packets Recv:       1243
              Expected Replies:          0
    What could be the reason ?
    No errors on ACS server; same rights had been given to the user account.
    Thanks to advise.
    Prasey

    Hi there,
    Does the user get authenticated in the ACS logs?
    reports and activity----> failed attempts
    ro
    reports and activity----->  passed authentications
    That will help narrow it down.
    Brad

  • Keyboard is not working on one user account

    Only one user account on my iMac cannot use the keyboard. All other accounts including the admin works fine. But after my daughter signs in to her account (using the keyboard to type her password) the keyboard is no longer detected by bluetooth. The mouse works fine and it seems as though the keyboard actually loses power too because the caps lock button does not even light up anymore. Please help!

    Hello ChristinaM004,
    After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning bluetooth issues:
    Troubleshooting wireless mouse and keyboard issues
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

Maybe you are looking for

  • Why is ISDN so much down lately?

    Hi, I encounter lately difficulties accessing SDN. Last week I got stuff like Internal Server Error 500! java.lang.NullPointerException when simply posting a forum message. Yesterday and this morning I got messages that it was down for approx an hour

  • Payment terms in Rebates

    Hi Can any body tell what is the use of the Payment tems in Rebates partial settlement screen? I have a requirement, to pay the customers Cash discount (quantity base) based on the payment terms. Ex. If customer buys 100 Qty @ Rs 100 his total invoic

  • Selection Screen for Cubes - defaulting Max. no. of hits

    Good morning all, i hope someone has run into this before, i am trying to default the max. no. of hits field to something larger than 200, which is the current default. i am have used se16 forever and there is a default screen for setting the max. no

  • I-Mac is on, but the screen is blank

    I turned on my mac today, the initial white screen came on as usual, the start up tone went off, and then the screen went completely blank. I can hear it is still on, and when I press keys, such as volume, they all sound but I can't see anything? I'v

  • Appfuse(jsf) project in jdevelop1013,error in login.xml (xml-20100)

    hi, i now study the appfuse(jsf) example,and view it in jdevelop1013 ide. but when compile the login.jsp,it makes a error. Error occurs in login.xml,and says "final error,xml-20100" when i run in tomcat5.0 with eclipse,non error occurs. why?and how t