Secure Login Client 2.0 SP04 Silent Installtion

Hi Experts,
I would like to seek assistance with mass roll-out of the secure login client. Is it possible to perform silent installation of the secure login client?
Thank you.
Regards,
Tom

Hi Thomas,
you may start SapSetupSLC.exe with parameter "/silent".
This installs SecureLoginClient (SLC) with it's default settings (all components except "Secure Login Server Support").
For a customized installation it's required to use the SAP Installation Server.
If your company is using SAP GUI there is possibly an Installation Server in place. SAPGUI and SLC are "SAPSetup"-packages hence it's possibly to integrate SLC into the SAPGUI package and distribute them together.
The Installation Server is also part of the SecureLoginClient package.
After extracting SapSetupSLC.exe with command line:C:\> SapSetupSLC.exe /x:C:\slc
you find SAP Setup Guide.pdf which describes ho to setup and configure the installation server.
You also find useful hints in the Secure Login Implementation Guide
chapter 2.1.1 Unattended Installation with SAPSetup Installation Server
Grüße / Kind regards,
Frank

Similar Messages

  • Secure login client is not working in VPN

    Hi,
    We have scenario where users connect to office network though VPN and access SSO. When users connect through VPN, users are not able to login in SLC and hence not receiving X.509 user certificate. It shows the following error when try to login in SLC.
    "There are currently no logon servers available to service the logon request"
    But the same SLC is working when users connect directly (ex LAN or WI-FI) to the network.
    We have enabled secure login client trace and found the below errors in the trace when user is connected through VPN.
    SLC trace file
    [2014.04.23 14:23:24.531][ERROR][sbus.exe            ][BASE        ][  6060] ERROR(0xA0100017) in CRYPT->sec_crypt_cipher_get_cipher_len(): An attribute is missing
    [2014.04.23 14:23:39.578][WARN ][sbus.exe            ][Kerberos    ][  6056] Getting kerberos ticket for 'HTTP/ssodev' with algorithm 23 returned error
    [2014.04.23 14:23:39.578][WARN ][sbus.exe            ][Kerberos    ][  6056]     0/C000005E There are currently no logon servers available to service the logon request.
    [2014.04.23 14:23:39.578][WARN ][sbus.exe            ][Kerberos    ][  6056] Getting kerberos ticket for 'HTTP/ssodev' with algorithm  3 returned error
    [2014.04.23 14:23:39.578][WARN ][sbus.exe            ][Kerberos    ][  6056]     0/C000005E There are currently no logon servers available to service the logon request.
    [2014.04.23 14:23:39.578][WARN ][sbus.exe            ][Kerberos    ][  6056] Getting kerberos ticket for 'HTTP/ssodev' failed (user name is [email protected])
    [2014.04.23 14:23:39.578][ERROR][sbus.exe            ][Kerberos    ][  6056] ERROR(0xA2600202) in KERBEROS->sec_kerberos_clientGetTicket(): No Kerberos ticket for the requested service
    [2014.04.23 14:23:39.578][ERROR][sbus.exe            ][Kerberos    ][  6056] ERROR(0xA2600202) in KERBEROS->sec_kerberos_spnego_CreateToken(): No Kerberos ticket for the requested service
    [2014.04.23 14:23:39.578][WARN ][sbus.exe            ][Kerberos    ][  6056] Getting kerberos ticket for 'HTTP/[email protected]' with algorithm 23 returned error
    [2014.04.23 14:23:39.578][WARN ][sbus.exe            ][Kerberos    ][  6056]     0/C000005E There are currently no logon servers available to service the logon request.
    [2014.04.23 14:23:39.578][WARN ][sbus.exe            ][Kerberos    ][  6056] Getting kerberos ticket for 'HTTP/[email protected]' with algorithm  3 returned error
    [2014.04.23 14:23:39.578][WARN ][sbus.exe            ][Kerberos    ][  6056]     0/C000005E There are currently no logon servers available to service the logon request.
    [2014.04.23 14:23:39.578][WARN ][sbus.exe            ][Kerberos    ][  6056] Getting kerberos ticket for 'HTTP/[email protected]' failed (user name is [email protected])
    [2014.04.23 14:23:39.578][ERROR][sbus.exe            ][Kerberos    ][  6056] ERROR(0xA2600202) in KERBEROS->sec_kerberos_clientGetTicket(): No Kerberos ticket for the requested service
    [2014.04.23 14:23:39.578][ERROR][sbus.exe            ][Kerberos    ][  6056] ERROR(0xA2600202) in KERBEROS->sec_kerberos_spnego_CreateToken(): No Kerberos ticket for the requested service
    [2014.04.23 14:28:38.171][TRACE][sbus.exe            ][sbusslogin.d][  6056] { CSecureLogin_Protocol_2_0::Send_DeleteSession
    Anyone suggest us to fix this issue.
    Regards,
    Yogesh Kumar D

    Hello,
    which kind of VPN do you use?
    Does this guarantee full network access to the domain servers?
    Is the VPN network IPv4 or IPv6 based?
    thanks for the information
    best regards
    Alexander Gimbel

  • Secure Login Client and Java

    Hi All,
    We are having a project to implement NW SSO for NWBC for HTML, Citrix XenApp will be used as the desktop environment. The requirement is that no Java allowed to be installed on the web browser.
    According to PAM, Secure Login Client is not support Microsoft Application Virtualization (App-V), so how can we deploy the Secure Login Client to Citrix environment?
    If we want to use Secure Login Web Client instead of Secure Login Client, does Secure Login Web Client requires Java installed on users' web browsers? In the latest Secure Login implementation guide (SSO 2.0), it does not mentioned anything about Java runtime. However, because as far as I understand, Secure Login Web Client is a feature of Secure Login Server, while Secure Login Server is pure Java application, I suspect that Secure Login Web Client also require Java runtime to run. Is that true?
    Best regards,
    Duy

    Hello Duy,
    The Product Availability Matrix states that Secure Login Web Client needs a Java runtime in the browser. See the footer of the Secure Login Web Client pages for Windows and Linux/MAC OS browser platform support. It says the following:
    For Windows: SupportedJava Runtime: Oracle (Sun) JSE 6, 7 and8, 32bit
    For Linux/MAC OS: Supported Java Runtime: Oracle (Sun) JSE 6.0 and7.0, 32bit/64bit depending on browser
    Best regards,
    Martin

  • Secure Login and trust between BO/BW

    Hi.
    We configured server-side trust between BO and BW using libsapcrypto library. All works fine.
    Now we installing Secure Login (SAP NetWeaver Single Sign-On) for SSO from SAP GUI based on Kerberos token. To configure Secure Login we need to modify profile parameters like
      snc/identity/as=p:CN=QBW, OU=Surgutasuneft, O=Surgutneftegas, C=RU
      snc/gssapi_lib=/sapmnt/QBW/exe/libsapcrypto.so
    which were in use by server-side trust between BO and BW. So when we modify them like in installation guide for Secure Login to this:
      snc/identity/as=p:CN=SAP/[email protected]
      snc/gssapi_lib=/usr/sap/QBW/DVEBMGS20/SLL/libsecgss.sl
    we can use SAP GUI SSO to BW but can't run reports from BO since we broke server-side trust.
    We tried many different variations of using these two libraries (including fully regenerating certificates both on BW and BO for server-side trust) but they all failed.
    Any suggestions of how we can activate SAP NetWeaver Single Sign-On on our BW systems, without breaking server-side trust between BW and BO?
    Thanks in advance
    wbr
    Stanislav

    Thanks, but this problem was resolved. Frane was very helpfull in solving this problem, but it was beyond the forum.
    He described the possibility of Secure Login Client that I did not know.
    Another possibility is implemented in Secure Login Client 1.0 SP02 Patch 03 and higher (current version is 1.0 SP03 Patch 02).
    Secure Login Client is able to “rebuild” the required SPN Name (in your example p:CN=SAP/[email protected]).
    This means if the X.509 certificate SNC name is p:CN=KerberosSSO à Secure Login Client will rebuild p:CN=SAP/[email protected]
    This works also if the X.509 certificate name is p:CN=KerberosSSO, OU=SAP Security, C=RU
    Maybe this solution integration is easier for You? You can use the transaction STRUST to create a self-signed certificate.
    Thanks again, Frane.

  • Secure Login library

    Hi All,
    I want to implement single sign on using secure login. Secure login provides 3 components: secure login server,secure login library and secure login client.
    In installation guide it says that it is not necessary to install all components.This depends upon the use case scenarios.
    In my case it will be active directory using kerberos technology. So I have to install login library and login client. or any one of them.
    Please let me know.
    Regards,
    Josh

    Hi,
    please do the below steps
    Step1: Install SAP library on your local P.C.
    Step 2: Configure the sapdoc.ini
    Configure file sapdoc.ini with the entry as shown. This file exists on C:\Windows. If it is not found, create it using your favorite text editor.
    HtmlHelpFilePath-EN=<C:\Program Files\SAP\SAP ERP Central Component 5.0 English\HELPDATA\EN> : Path of SAP help where you installed it on your P.C.
    u2014-
    Step3: logon to sap dev system
                u2013> Execute the tcode SR13
                u2013> Click on the tab HtmlHelp file
                u2013 >Click on New entries Enter variant name (ECC5 if u r using SAP ECC5)
                -->Platform =Win32 if you are using xp
                -->Area =IWBHELP
                -->Path = http://help.sap.com Or path of the your server where SAP library is installed.
                 Save it. Request Dialog prompts you to create request. Create Request.
                Transport the request to Quality & Production.
    Note: Entries in the file sapdoc.ini overwrites the settings present in SR13, if SAP library is not available on your local
    system, it starts from central location.
    Do you  want more details for this issue please find  below link
    http://www.scribd.com/doc/6213550/How-to-Setup-Sap-Library
    Regards,
    K.Ramamoorthy

  • AnyConnect Secure Mobility Client with Oracle ESSO 11.1.1.5

    Hello,
    we are about to implement Oracle SSO for our client whose employees use Cisco AnyConnect Secure Mobility Client 3.0.5080 to access their internal network. The VPN access requires having the correct certificate installed on the client computers and users are required to enter their credentials (the same credentials that are stored in MS AD). All the client computers run Win 7.
    Now - what we want to achieve is following: A client's employee logs into a domain, using domain account and starts the Cisco AnyConnect. The best option would be that the Oracle SSO would take it from here and do the rest in setting up the VPN connection - confirming the pre-selected profile, clicking the connect button, then filling the user credentials (from Oracle SSO database) in and confirming the dialog. Or, which is probably more viable way - the user will start AnyConnect, selecting which network to login in and the SSO will only enter the credentials and submit them to establish the connection.
    So far we have been able to create templates for Oracle SSO to automatically enter the credentials for various applications, including SAP, but we are not able to create working template for AnyConnect. We are able to catch all the fields in the login window - Username, Password, Ok/Submit - when creating the template in ESSO-LM Admin Console but once the template is published to the repository and added to the test user in ESSO-PG, the SSO does not fill the credentials in. We also tried to "bypass this" using SendKeys with no result as well. All other applikcatios work.
    Do you have any experience with such situation or have any hints what can we try?
    Thank you for any answers,
    Ondrej
    PS: I have found https://supportforums.cisco.com/message/3852541. Is it really that the AnyConnect does not allow any application any input?

    Here is a link to an example of configuring AnyConnect to use IKEv2. According to this ASA 8.4 and AnyConnect 3.1 should be ok.
    http://www.cisco.com/c/en/us/support/docs/security/anyconnect-secure-mobility-client/113692-ac-ikev2-ca-00.html
    HTH
    Rick

  • Secure Login from Internet

    Hi, We are looking to make the Portal available to our clients over the internet with a secure login.  Is there any way to allow us to allow login in any of the following ways?:  What would be required?
    1. User Logs in with User Name/Password, but only if they have a Certificate we issued to them or they have on their pc.
    2. Allow the Portal to automatically log them in if they have a certificate?
    Thanks

    Hi,
    if I understand you correctly, you want to have a mutual authentication, meaning:
    1. You'll have a SSL secured connection to your portal from the Internet
    2. The users do have a client certificate that your organization (CA, PKI) has issued.
    The EP supports client certificates. You'll have to enable this feature on the portal server.
    SAP Help: http://help.sap.com/saphelp_nw70/helpdata/en/b1/07dd3aeedb7445e10000000a114084/frameset.htm
    br,
    Tobias

  • Windows 8 64 bit issues with Cisco AnyConnect Secure Mobility Client version 3.1.04072

    I am having an issue with the Cisco AnyConnect Secure Mobility Client version 3.1.04072 on a Windows 8 64 bit laptop.
    I am able to create the VPN connection but the connection will not allow data to be transferred.
    Stats from a manual connection:
    Cisco AnyConnect Secure Mobility Client Version 3.1.04072
    VPN Stats
        Bytes Received:  14375
        Bytes Sent:  0
        Compressed Bytes Received:  0
        Compressed Bytes Sent:  0
        Compressed Packets Received:  0
        Compressed Packets Sent:  0
        Control Bytes Received:  0
        Control Bytes Sent:  0
        Control Packets Received:  0
        Control Packets Sent:  0
        Encrypted Bytes Received:  7820
        Encrypted Bytes Sent:  1207
        Encrypted Packets Received:  9
        Encrypted Packets Sent:  3
        Inbound Bypassed Packets:  0
        Inbound Discarded Packets:  0
        Outbound Bypassed Packets:  0
        Outbound Discarded Packets:  0
        Packets Received:  4
        Packets Sent:  0
        Time Connected:  00:03:01
    Protocol Info
        Inactive Protocol
            Protocol Cipher:  RSA_3DES_168_SHA1
            Protocol Compression:  None
            Protocol State:  Disconnected
            Protocol:  DTLS
        Active Protocol
            Protocol Cipher:  RSA_3DES_168_SHA1
            Protocol Compression:  Deflate
            Protocol State:  Connected
            Protocol:  TLS
    OS Version
        Windows 8 : WinNT 6.2.9200
    Log from the data transmission software:
    24/12/2013 12:51:13 - Application version = 1.11.28.0
    24/12/2013 12:51:13 - Lodgement Library Version =  1.11.28.0
    24/12/2013 12:51:13 - Connection Method =  INTERNET
    24/12/2013 12:51:13 - DIS Connection Type = Automatic
    24/12/2013 12:51:13 - VPN Client =  ACTIVE
    24/12/2013 12:51:13 - Check Available Connections =  NOT ACTIVE
    24/12/2013 12:51:13 - Windows 8 (6.2.9200 SP )
    24/12/2013 12:51:13 - Language: English (Australia)
    24/12/2013 12:51:13 -
    24/12/2013 12:51:13 - Connected to ISP via LAN
    24/12/2013 12:51:13 - Checking for presence of VPN client.
    24/12/2013 12:51:13 - VPN client found. (C:\Program Files (x86)\Cisco\Cisco AnyConnect Secure Mobility Client\vpncli.exe)
    24/12/2013 12:51:13 - The Cisco AnyConnect Secure Mobility Client application is in use.
    24/12/2013 12:51:18 - Terminating Cisco AnyConnect Secure Mobility Client in progress ...
    24/12/2013 12:51:18 -
    24/12/2013 12:51:18 - Checking Cisco AnyConnect  version.
    24/12/2013 12:51:19 - Cisco AnyConnect Secure Mobility Client (version 3.1.04072) .
    24/12/2013 12:51:19 - Copyright (c) 2004 - 2013 Cisco Systems, Inc.  All Rights Reserved.
    24/12/2013 12:51:19 - Config file directory:C:\Program Files (x86)\Cisco\Cisco AnyConnect Secure Mobility Client\
    24/12/2013 12:51:19 -
    24/12/2013 12:51:19 - Loading profile:C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile\ELS-IMelAde-TCP.xml
    24/12/2013 12:51:19 -
    24/12/2013 12:51:19 - Initializing the VPN connection.
    24/12/2013 12:51:19 - Ready to connect.
    24/12/2013 12:51:19 - Ready to connect.
    24/12/2013 12:51:19 - Contacting ELS-IMelAde-TCP.
    24/12/2013 12:51:23 - Authenticating user.
    24/12/2013 12:51:23 - Connected to VPN concentrator.
    24/12/2013 12:51:23 - Establishing VPN session...
    24/12/2013 12:51:23 - Checking for profile updates...
    24/12/2013 12:51:23 - Checking for product updates...
    24/12/2013 12:51:23 - Checking for customization updates...
    24/12/2013 12:51:23 - Performing any required updates...
    24/12/2013 12:51:23 - Establishing VPN session...
    24/12/2013 12:51:23 - Establishing VPN - Initiating connection...
    24/12/2013 12:51:24 - Establishing VPN - Examining system...
    24/12/2013 12:51:24 - Establishing VPN - Activating VPN adapter...
    24/12/2013 12:51:24 - Establishing VPN - Configuring system...
    24/12/2013 12:51:24 - Establishing VPN...
    24/12/2013 12:51:24 - Connected to VPN concentrator.
    24/12/2013 12:51:24 - Connected to ELS-IMelAde-TCP.
    24/12/2013 12:51:24 - Connected to VPN concentrator.
    24/12/2013 12:51:24 - Connection to VPN client return code = 0.
    24/12/2013 12:51:24 - Connected to VPN concentrator.
    24/12/2013 12:51:24 - Connecting : Connecting to 203.202.43.2.
    24/12/2013 12:51:45 - Error in ConnectToDIS - Socket Error # 10060
    Connection timed out.
    24/12/2013 12:51:46 -
    24/12/2013 12:51:46 - Disconnecting from the VPN concentrator.
    24/12/2013 12:51:46 - Disconnect in progress, please wait...
    24/12/2013 12:51:46 - Detaching AnyConnect, please wait...
    24/12/2013 12:51:47 - Detached.
    24/12/2013 12:51:47 - Disconnected from VPN concentrator.
    24/12/2013 12:51:47 - *****************************************************
    24/12/2013 12:51:47 -               END OF LODGEMENT PROCESS
    24/12/2013 12:51:47 - *****************************************************
    Issue history:
    - Previously running Cisco VPN client on Windows 8 64 bit laptop (VPN working and able to transmit data over VPN)
    - Upgrade to Windows 8.1 stopped the VPN client working
    - Refreshed system back to Windows 8 and reinstalled all software
    - Cisco VPN client would not install on system
    - Cisco AnyConnect Secure Mobility Client installs and is able to connect to VPN host
    - Cisco AnyConnect Secure Mobility Client downloads and installs software from VPN host
    - Data transmission software returns error code #10060
    Any assistance would be greatly appreciated.

    anyone found the fix for this?

  • AnyConnect Secure Mobility Client v3.1.04066 "The VPN client driver encountered an error"

    Hello, I am a software engineer and have been trying to connect to my client's VPN using the AnyConnect Secure Mobility Client (version 3.1.04066) and keep receiving the error "The VPN client driver encountered an error. Please try again or restart your system."
    I am on a Windows 7 system with an intel i7-2670QM cpu. My computer model is an HP Pavilion dv7.
    I have tried uninstalling the software, re-installing it. I've tried restarting my system multiple times through the process. I've checked the registry and made sure the name was setup correctly. I have checked and made sure that the correct services are not enabled. I have also tried what was suggested on the support page and checked the integrity of catroot2 as well as renaming it and regenerating the folder. None of these have been able to fix my problem.
    For information, this is the message history when I try to connect:
    [12/8/2014 8:55:49 AM] Ready to connect.
    [12/8/2014 9:27:19 AM] Contacting vpn.[hostaddressremoved].com.
    [12/8/2014 9:27:22 AM] Please enter your username and password.
    [12/8/2014 9:27:29 AM] User credentials entered.
    [12/8/2014 9:27:30 AM] Please respond to banner.
    [12/8/2014 9:27:31 AM] User accepted banner.
    [12/8/2014 9:27:31 AM] Establishing VPN session...
    [12/8/2014 9:27:32 AM] Checking for profile updates...
    [12/8/2014 9:27:32 AM] Checking for product updates...
    [12/8/2014 9:27:32 AM] Checking for customization updates...
    [12/8/2014 9:27:32 AM] Performing any required updates...
    [12/8/2014 9:27:32 AM] Establishing VPN session...
    [12/8/2014 9:27:32 AM] Establishing VPN - Initiating connection...
    [12/8/2014 9:27:33 AM] Establishing VPN - Examining system...
    [12/8/2014 9:27:33 AM] Establishing VPN - Activating VPN adapter...
    [12/8/2014 9:27:33 AM] Establishing VPN - Attempting to repair VPN adapter...
    [12/8/2014 9:27:33 AM] Disconnect in progress, please wait...
    [12/8/2014 9:28:22 AM] Connection attempt has failed.
    [12/8/2014 9:28:24 AM] Ready to connect.
    I have tried every kind of search I can think of to find any other solutions to try, and I cannot find anything else. Does anyone have any other recommendations of what to try in order to be able to connect to my client?
    -TheJayDude

    Yes, I am sorry to say that several people have seen the same issue.  It seems like the issue is specific to Yosemite and Anyconnect. My very technical staff and I have tried many things.  The default route is missing and the file /var/run/resolv.conf is also missing which means that both the route and DNS server are messed up.  We re-added the default route manually which allows us to ping the servers and even access them via the IP address
    Run the command below before starting the VPN to get the default route
    netstat -nr | grep default
    Then run the following to re-add the default route.
    route add default xxx.xxx.xxx.xxx
    BUT there is no way that I can find to fix the DNS entry. 
    We tried re-adding the DNS entries in the /var/run/resolv.conf  and then restarting the DNS service
    $ sudo launchctl unload -w /System/Library/LaunchDaemons/com.apple.discoveryd.plist                                                                              
    Password:
    $ sudo launchctl load -w /System/Library/LaunchDaemons/com.apple.discoveryd.plist 
    BUT THIS DOES NOT WORK!
    If anyone can help us solve the DNS issue, at least we have a work-around for our technical people until Cisco and/or Apple can resolve it.
    Here is a link to the same issue at Cisco.
    https://supportforums.cisco.com/discussion/12334071/cisco-anyconnect-secure-mobi lity-client-os-x-yosemite-vpn-not-working-if-mac

  • Cisco Anyconnect Secure Mobility Client crashes on Mac 10.8.5

    Hi,
    I have a Macbook Pro with Mountain Lion 10.8.5 OS installed. I am using Cisco Anyconnect Secure Mobility Client as a VPN to access my company's network (Intranet). Had been using this software for more than 2 Months and all of a sudden now when I use this Secure Mobility Client, the application is crashing and I get the following error message:
    Process:         Cisco AnyConnect Secure Mobility Client [1340]
    Path: /Applications/Cisco/Cisco AnyConnect Secure Mobility Client.app/Contents/MacOS/Cisco AnyConnect Secure Mobility Client
    Identifier: com.cisco.vpn
    Version:         3.0.10055
    Code Type:       X86 (Native)
    Parent Process: launchd [152]
    Date/Time: 2013-11-10 11:18:57.739 +0530
    OS Version:      Mac OS X 10.8.5 (12F45)
    Report Version:  10
    Interval Since Last Report:          6277 sec
    Crashes Since Last Report:           2
    Per-App Crashes Since Last Report:   2
    Crashed Thread:  6
    Exception Type: EXC_BAD_ACCESS (SIGBUS)
    Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000004
    VM Regions Near 0x4:
    --> __PAGEZERO 0000000000000000-0000000000001000 [ 4K] ---/--- SM=NUL /Applications/Cisco/Cisco AnyConnect Secure Mobility Client.app/Contents/MacOS/Cisco AnyConnect Secure Mobility Client
        __TEXT                 0000000000001000-0000000000025000 [  144K] r-x/rwx SM=COW  /Applications/Cisco/Cisco AnyConnect Secure Mobility Client.app/Contents/MacOS/Cisco AnyConnect Secure Mobility Client
    Thread 0:: Dispatch queue: com.apple.main-thread
    0   libsystem_kernel.dylib                 0x96fcf7ce mach_msg_trap + 10
    1 libsystem_kernel.dylib                 0x96fcecac mach_msg + 68
    2 com.apple.CoreFoundation         0x990e1f79 __CFRunLoopServiceMachPort + 185
    3 com.apple.CoreFoundation         0x990e795f __CFRunLoopRun + 1247
    4 com.apple.CoreFoundation         0x990e701a CFRunLoopRunSpecific + 378
    5 com.apple.CoreFoundation         0x990e6e8b CFRunLoopRunInMode + 123
    6 com.apple.HIToolbox                   0x97821f5a RunCurrentEventLoopInMode + 242
    7 com.apple.HIToolbox                   0x97821cc9 ReceiveNextEventCommon + 374
    8 com.apple.HIToolbox                   0x97821b44 BlockUntilNextEventMatchingListInMode + 88
    9 com.apple.AppKit                         0x91d9193a _DPSNextEvent + 724
    10 com.apple.AppKit                       0x91d9116c -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 119
    11 com.apple.AppKit                       0x91d875cc -[NSApplication run] + 855

    I have identical problem on 10.7.5 OS and AnyConnect 3.1.04074
    Just started happening yesterday.
    Please post if you find a solution.

  • CTRANSPORT_ERROR_TIMEOUT with Cisco AnyConnect Secure Mobility Client 3.1.05170

    Hi,
    I use Cisco AnyConnect Secure Mobility Client 3.1.05170 to connect to my company network and it has been working successfully for a while and until Sunday evening Feb 8.
    Today, this solution is no longer working and I've reproduced the same issue on 3 different Mac's which have 10.10.2 (on 2 Mac's) and 10.9.5 (on 1 Mac).
    I can navigate on internet without any problem but when I launch the connection in Cisco AnyConnect Secure Mobility Client, it time outs and I get the following errors:
    Feb 10 10:37:31 nicolass-macbook-pro-2-2.home acvpnui[7926]: Message type information sent to the user: Contacting <company server name removed for security reasons>.
    Feb 10 10:37:31 nicolass-macbook-pro-2-2.home acvpnui[7926]: Initiating VPN connection to the secure gateway https://<company server name removed for security reasons>
    Feb 10 10:37:31 nicolass-macbook-pro-2-2.home acvpnagent[2013]: Function: processConnectNotification File: ../../vpn/Agent/MainThread.cpp Line: 11572 Received connect notification (host <company server name removed for security reasons>, profile myaccess1.xml)
    Feb 10 10:37:31 nicolass-macbook-pro-2-2.home acvpnagent[2013]: Function: resolveHostName File: ../../vpn/Common/Utility/HostLocator.cpp Line: 718 Invoked Function: CHostLocator::resolveHostNameAlt Return Code: -29294571 (0xFE410015) Description: DNSREQUEST_ERROR_EMPTY_RESPONSE
    Feb 10 10:37:32 nicolass-macbook-pro-2-2.home acvpnagent[2013]: Function: getHostIPAddrByName File: ../../vpn/Common/IPC/SocketSupport.cpp Line: 322 Invoked Function: ::getaddrinfo Return Code: 35 (0x00000023) Description: unknown
    Feb 10 10:37:32 nicolass-macbook-pro-2-2.home acvpnagent[2013]: Function: resolveHostName File: ../../vpn/Common/Utility/HostLocator.cpp Line: 730 Invoked Function: CSocketSupport::getHostIPAddrByName Return Code: -31195124 (0xFE24000C) Description: SOCKETSUPPORT_ERROR_GETADDRINFO
    Feb 10 10:37:32 nicolass-macbook-pro-2-2.home acvpnagent[2013]: Function: ResolveHostname File: ../../vpn/Common/Utility/HostLocator.cpp Line: 839 Invoked Function: CHostLocator::resolveHostName Return Code: -31195124 (0xFE24000C) Description: SOCKETSUPPORT_ERROR_GETADDRINFO failed to resolve host name <company server name removed for security reasons> to IPv6 address
    Feb 10 10:37:32 nicolass-macbook-pro-2-2.home acvpnagent[2013]: Function: logResolutionResult File: ../../vpn/Common/Utility/HostLocator.cpp Line: 913 Host <company server name removed for security reasons> has been resolved to IP address 144.24.19.20
    Feb 10 10:37:32 nicolass-macbook-pro-2-2.home acvpnagent[2013]: Writing to hosts file:  144.24.19.20    <company server name removed for security reasons> ###Cisco AnyConnect VPN client modified this file. Please do not modify contents until this comment is removed.
    Feb 10 10:37:32 nicolass-macbook-pro-2-2.home acvpnagent[2013]: Function: respondToConnectNotification File: ../../vpn/Agent/MainThread.cpp Line: 4893 The requested VPN connection to <company server name removed for security reasons> will target the following IP protocols and addresses: primary - IPv4 (address 144.24.19.20), secondary - N/A.
    Feb 10 10:37:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Function: getUserName File: ../../vpn/Api/CTransportCurlStatic.cpp Line: 1939 PasswordEntry username is nwipfli
    Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Function: PeerCertVerifyCB File: ../../vpn/Api/CTransportCurlStatic.cpp Line: 857 Return success from VerifyServerCertificate
    Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Function: SendRequest File: ../../vpn/Api/CTransportCurlStatic.cpp Line: 1422 Invoked Function: curl_easy_perform Return Code: -30015442 (0xFE36002E) Description: CTRANSPORT_ERROR_TIMEOUT 28 : Error
    Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Function: sendRequest File: ../../vpn/Api/ConnectIfc.cpp Line: 3191 Invoked Function: CTransport::SendRequest Return Code: -30015442 (0xFE36002E) Description: CTRANSPORT_ERROR_TIMEOUT
    Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Function: connect File: ../../vpn/Api/ConnectIfc.cpp Line: 481 Invoked Function: ConnectIfc::sendRequest Return Code: -30015442 (0xFE36002E) Description: CTRANSPORT_ERROR_TIMEOUT
    Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Function: TranslateStatusCode File: ../../vpn/Api/ConnectIfc.cpp Line: 3008 Invoked Function: TranslateStatusCode Return Code: -30015442 (0xFE36002E) Description: CTRANSPORT_ERROR_TIMEOUT Connection attempt has timed out.  Please verify Internet connectivity.
    Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Function: doConnectIfcConnect File: ../../vpn/Api/ConnectMgr.cpp Line: 1963 Invoked Function: ConnectIfc::connect Return Code: -30015442 (0xFE36002E) Description: CTRANSPORT_ERROR_TIMEOUT
    Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Message type warning sent to the user: Connection attempt has failed.
    Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Function: processIfcData File: ../../vpn/Api/ConnectMgr.cpp Line: 2614 Content type (unknown) received. Response type (host unreachable) from <company server name removed for security reasons>:
    Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Message type warning sent to the user: Unable to contact <company server name removed for security reasons>.
    Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Function: processIfcData File: ../../vpn/Api/ConnectMgr.cpp Line: 2724 Unable to contact <company server name removed for security reasons>
    Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Message type error sent to the user: Connection attempt has timed out.  Please verify Internet connectivity.
    Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Function: connect File: ../../vpn/Api/ConnectMgr.cpp Line: 2050 ConnectMgr::processIfcData failed
    Feb 10 10:38:32 nicolass-macbook-pro-2-2.home acvpnui[7926]: Function: initiateConnect File: ../../vpn/Api/ConnectMgr.cpp Line: 1181 Connection failed.
    Any idea about a solution ?
    Thanks in advance
    Nicolas

    There seem to be much more problems with 3.1.04049
    Especially with certificate authentication.
    I opened some TAC cases.
    Try 3.1.04063 that came out at 07-24-13.
    TAC said that there are some fixes in it...

  • Problems with Cisco AnyConnect Secure Mobility Client 3.1

    Since I upgraded to Cisco AnyConnect Secure Mobility Client 3.1, I am unable to start my VPN.
    The service does not start correctly anymore. I tried reinstabut no help.
    Could anyone help me please?
    Here my logs.
    Thank you very much.
    Date        : 07/23/2013
    Time        : 08:49:37
    Type        : Error
    Source      : acvpninstall
    Description : Function: FileMoveFiles
    File: ..\Common\Utility\NativeSysFileCopy.cpp
    Line: 388
    Invoked Function: ::FindFirstFile
    Return Code: 3 (0x00000003)
    Description: The system cannot find the path specified.
    Date        : 07/23/2013
    Time        : 08:49:37
    Type        : Error
    Source      : acvpninstall
    Description : Function: wWinMain
    File: .\InstallHelper.cpp
    Line: 354
    Invoked Function: FileMoveFiles
    Return Code: -33554423 (0xFE000009)
    Description: GLOBAL_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:49:37
    Type        : Error
    Source      : acvpninstall
    Description : Function: FileMoveFiles
    File: ..\Common\Utility\NativeSysFileCopy.cpp
    Line: 388
    Invoked Function: ::FindFirstFile
    Return Code: 3 (0x00000003)
    Description: The system cannot find the path specified.
    Date        : 07/23/2013
    Time        : 08:49:37
    Type        : Error
    Source      : acvpninstall
    Description : Function: wWinMain
    File: .\InstallHelper.cpp
    Line: 354
    Invoked Function: FileMoveFiles
    Return Code: -33554423 (0xFE000009)
    Description: GLOBAL_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:49:37
    Type        : Error
    Source      : acvpninstall
    Description : Function: FileMoveFiles
    File: ..\Common\Utility\NativeSysFileCopy.cpp
    Line: 388
    Invoked Function: ::FindFirstFile
    Return Code: 3 (0x00000003)
    Description: The system cannot find the path specified.
    Date        : 07/23/2013
    Time        : 08:49:37
    Type        : Error
    Source      : acvpninstall
    Description : Function: wWinMain
    File: .\InstallHelper.cpp
    Line: 354
    Invoked Function: FileMoveFiles
    Return Code: -33554423 (0xFE000009)
    Description: GLOBAL_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:49:40
    Type        : Information
    Source      : acvpnva
    Description : Function: CInstaller::PerformAction
    File: .\VACon.cpp
    Line: 522
    Successfully installed service acsock
    Date        : 07/23/2013
    Time        : 08:49:40
    Type        : Warning
    Source      : acvpninstall
    Description : Function: XmlLocalACPolMgr::GenerateLocalPolicy
    File: .\Xml\XmlLocalACPolMgr.cpp
    Line: 415
    Local Security Policy file already exists and therefore will not be generated
    Date        : 07/23/2013
    Time        : 08:49:40
    Type        : Information
    Source      : acvpnagent
    Description : Cisco AnyConnect Secure Mobility Client Agent starting, version 3.1.04059
    Date        : 07/23/2013
    Time        : 08:49:40
    Type        : Error
    Source      : acvpnagent
    Description : Function: CBencodeStream::LoadStream
    File: ..\..\PhoneHome\Bencode.cpp
    Line: 126
    Unable to open file for reading
    Date        : 07/23/2013
    Time        : 08:49:40
    Type        : Error
    Source      : acvpnagent
    Description : Function: CBencodeDictionary::CBencodeDictionary
    File: ..\..\PhoneHome\Bencode.cpp
    Line: 1422
    Bencode dictionary internalize failed
    Date        : 07/23/2013
    Time        : 08:49:40
    Type        : Error
    Source      : acvpnagent
    Description : Function: CPhoneHomeVpn::CPhoneHomeVpn
    File: .\PhoneHomeVpn.cpp
    Line: 187
    Failed to create Bencode dictionary
    Date        : 07/23/2013
    Time        : 08:49:40
    Type        : Error
    Source      : acvpnagent
    Description : Function: CPhoneHomeVpn::CreateSingletonInstance
    File: .\PhoneHomeVpn.cpp
    Line: 82
    Invoked Function: CPhoneHomeVpn
    Return Code: -23396343 (0xFE9B0009)
    Description: PHONEHOMEVPN_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:49:40
    Type        : Warning
    Source      : acvpnagent
    Description : Function: CMainThread::CMainThread
    File: .\MainThread.cpp
    Line: 1017
    Invoked Function: CPhoneHomeVpn::CreateSingletonInstance
    Return Code: -23396343 (0xFE9B0009)
    Description: PHONEHOMEVPN_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:49:40
    Type        : Warning
    Source      : acvpnagent
    Description : Function: PluginLoader::QuickCreatePlugin
    File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
    Line: 195
    Invoked Function: PluginLoader::CreateInstance
    Return Code: -29360116 (0xFE40000C)
    Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
    com.cisco.anyconnect.leaf
    Date        : 07/23/2013
    Time        : 08:49:41
    Type        : Information
    Source      : acvpnagent
    Description : Function: MsgCatalog::initMsgCatalog
    File: .\i18n\MsgCatalog.cpp
    Line: 246
    Current locale: fr-LU
    Date        : 07/23/2013
    Time        : 08:49:41
    Type        : Information
    Source      : acvpnagent
    Description : Function: ProfileMgr::loadProfiles
    File: .\ProfileMgr.cpp
    Line: 100
    No profile is available.
    Date        : 07/23/2013
    Time        : 08:49:41
    Type        : Information
    Source      : acvpnagent
    Description : Current Preference Settings:
    ServiceDisable: false
    CertificateStoreOverride: false
    CertificateStore: All
    ShowPreConnectMessage: false
    AutoConnectOnStart: false
    MinimizeOnConnect: true
    LocalLanAccess: false
    AutoReconnect: true
    AutoReconnectBehavior: DisconnectOnSuspend
    UseStartBeforeLogon: false
    AutoUpdate: true
    RSASecurIDIntegration: Automatic
    WindowsLogonEnforcement: SingleLocalLogon
    WindowsVPNEstablishment: LocalUsersOnly
    ProxySettings: Native
    AllowLocalProxyConnections: true
    PPPExclusion: Disable
    PPPExclusionServerIP:
    AutomaticVPNPolicy: false
    TrustedNetworkPolicy: Disconnect
    UntrustedNetworkPolicy: Connect
    TrustedDNSDomains:
    TrustedDNSServers:
    AlwaysOn: false
    ConnectFailurePolicy: Closed
    AllowCaptivePortalRemediation: false
    CaptivePortalRemediationTimeout: 5
    ApplyLastVPNLocalResourceRules: false
    AllowVPNDisconnect: true
    EnableScripting: false
    TerminateScriptOnNextEvent: false
    EnablePostSBLOnConnectScript: true
    AutomaticCertSelection: true
    RetainVpnOnLogoff: false
    UserEnforcement: SameUserOnly
    EnableAutomaticServerSelection: false
    AutoServerSelectionImprovement: 20
    AutoServerSelectionSuspendTime: 4
    AuthenticationTimeout: 12
    SafeWordSofTokenIntegration: false
    AllowIPsecOverSSL: false
    ClearSmartcardPin: true
    IPProtocolSupport: IPv4,IPv6
    AllowManualHostInput: true
    BlockUntrustedServers: true
    PublicProxyServerAddress:
    Date        : 07/23/2013
    Time        : 08:49:41
    Type        : Error
    Source      : acvpnagent
    Description : Function: CSocketSupport::ipv6EnabledOnVA
    File: .\IPC\SocketSupport_win.cpp
    Line: 284
    Invoked Function: CSocketSupport::ipv6EnabledOnVA
    Return Code: 2 (0x00000002)
    Description: cannot open VPNVA Enum registry key (VA driver not installed?)
    Date        : 07/23/2013
    Time        : 08:49:41
    Type        : Error
    Source      : acvpnagent
    Description : Function: CSocketSupport::ipv6EnabledOnVA
    File: .\IPC\SocketSupport_win.cpp
    Line: 284
    Invoked Function: CSocketSupport::ipv6EnabledOnVA
    Return Code: 2 (0x00000002)
    Description: cannot open VPNVA Enum registry key (VA driver not installed?)
    Date        : 07/23/2013
    Time        : 08:49:41
    Type        : Information
    Source      : acvpnagent
    Description : Function: CCvcConfig::readConfigParamFromFile
    File: .\vpnconfig.cpp
    Line: 5824
    The specified configuration file for MUS service does not exist
    Date        : 07/23/2013
    Time        : 08:49:41
    Type        : Information
    Source      : acvpnagent
    Description : Function: CThread::createThread
    File: .\Utility\Thread.cpp
    Line: 238
    The thread (0x00001F84) has been successfully created.
    Date        : 07/23/2013
    Time        : 08:49:41
    Type        : Information
    Source      : acvpnagent
    Description : Cisco AnyConnect Secure Mobility Client Agent started, version 3.1.04059
    Date        : 07/23/2013
    Time        : 08:49:41
    Type        : Information
    Source      : acvpnagent
    Description : Function: CInterfaceRouteMonitorCommon::logInterfaces
    File: .\Routing\InterfaceRouteMonitorCommon.cpp
    Line: 477
    IP Address Interface List:
    FE80:0:0:0:DDA0:24CA:FE35:4D19
    148.110.133.126
    FE80:0:0:0:19A3:961F:C11C:3724
    192.168.164.1
    FE80:0:0:0:80B3:F3CD:CA44:952E
    169.254.149.46
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Information
    Source      : acvpnagent
    Description : Cisco AnyConnect Secure Mobility Client Agent starting, version 3.1.04059
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Error
    Source      : acvpnagent
    Description : Function: CBencodeStream::LoadStream
    File: ..\..\PhoneHome\Bencode.cpp
    Line: 126
    Unable to open file for reading
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Error
    Source      : acvpnagent
    Description : Function: CBencodeDictionary::CBencodeDictionary
    File: ..\..\PhoneHome\Bencode.cpp
    Line: 1422
    Bencode dictionary internalize failed
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Error
    Source      : acvpnagent
    Description : Function: CPhoneHomeVpn::CPhoneHomeVpn
    File: .\PhoneHomeVpn.cpp
    Line: 187
    Failed to create Bencode dictionary
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Error
    Source      : acvpnagent
    Description : Function: CPhoneHomeVpn::CreateSingletonInstance
    File: .\PhoneHomeVpn.cpp
    Line: 82
    Invoked Function: CPhoneHomeVpn
    Return Code: -23396343 (0xFE9B0009)
    Description: PHONEHOMEVPN_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Warning
    Source      : acvpnagent
    Description : Function: CMainThread::CMainThread
    File: .\MainThread.cpp
    Line: 1017
    Invoked Function: CPhoneHomeVpn::CreateSingletonInstance
    Return Code: -23396343 (0xFE9B0009)
    Description: PHONEHOMEVPN_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Warning
    Source      : acvpnagent
    Description : Function: PluginLoader::QuickCreatePlugin
    File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
    Line: 195
    Invoked Function: PluginLoader::CreateInstance
    Return Code: -29360116 (0xFE40000C)
    Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
    com.cisco.anyconnect.leaf
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Information
    Source      : acvpnagent
    Description : Function: MsgCatalog::initMsgCatalog
    File: .\i18n\MsgCatalog.cpp
    Line: 246
    Current locale: fr-LU
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Information
    Source      : acvpnagent
    Description : Function: ProfileMgr::loadProfiles
    File: .\ProfileMgr.cpp
    Line: 100
    No profile is available.
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Information
    Source      : acvpnagent
    Description : Current Preference Settings:
    ServiceDisable: false
    CertificateStoreOverride: false
    CertificateStore: All
    ShowPreConnectMessage: false
    AutoConnectOnStart: false
    MinimizeOnConnect: true
    LocalLanAccess: false
    AutoReconnect: true
    AutoReconnectBehavior: DisconnectOnSuspend
    UseStartBeforeLogon: false
    AutoUpdate: true
    RSASecurIDIntegration: Automatic
    WindowsLogonEnforcement: SingleLocalLogon
    WindowsVPNEstablishment: LocalUsersOnly
    ProxySettings: Native
    AllowLocalProxyConnections: true
    PPPExclusion: Disable
    PPPExclusionServerIP:
    AutomaticVPNPolicy: false
    TrustedNetworkPolicy: Disconnect
    UntrustedNetworkPolicy: Connect
    TrustedDNSDomains:
    TrustedDNSServers:
    AlwaysOn: false
    ConnectFailurePolicy: Closed
    AllowCaptivePortalRemediation: false
    CaptivePortalRemediationTimeout: 5
    ApplyLastVPNLocalResourceRules: false
    AllowVPNDisconnect: true
    EnableScripting: false
    TerminateScriptOnNextEvent: false
    EnablePostSBLOnConnectScript: true
    AutomaticCertSelection: true
    RetainVpnOnLogoff: false
    UserEnforcement: SameUserOnly
    EnableAutomaticServerSelection: false
    AutoServerSelectionImprovement: 20
    AutoServerSelectionSuspendTime: 4
    AuthenticationTimeout: 12
    SafeWordSofTokenIntegration: false
    AllowIPsecOverSSL: false
    ClearSmartcardPin: true
    IPProtocolSupport: IPv4,IPv6
    AllowManualHostInput: true
    BlockUntrustedServers: true
    PublicProxyServerAddress:
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Error
    Source      : acvpnagent
    Description : Function: CSocketSupport::ipv6EnabledOnVA
    File: .\IPC\SocketSupport_win.cpp
    Line: 284
    Invoked Function: CSocketSupport::ipv6EnabledOnVA
    Return Code: 2 (0x00000002)
    Description: cannot open VPNVA Enum registry key (VA driver not installed?)
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Error
    Source      : acvpnagent
    Description : Function: CSocketSupport::ipv6EnabledOnVA
    File: .\IPC\SocketSupport_win.cpp
    Line: 284
    Invoked Function: CSocketSupport::ipv6EnabledOnVA
    Return Code: 2 (0x00000002)
    Description: cannot open VPNVA Enum registry key (VA driver not installed?)
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Information
    Source      : acvpnagent
    Description : Function: CCvcConfig::readConfigParamFromFile
    File: .\vpnconfig.cpp
    Line: 5824
    The specified configuration file for MUS service does not exist
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Information
    Source      : acvpnagent
    Description : Function: CThread::createThread
    File: .\Utility\Thread.cpp
    Line: 238
    The thread (0x00001F20) has been successfully created.
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Information
    Source      : acvpnagent
    Description : Cisco AnyConnect Secure Mobility Client Agent started, version 3.1.04059
    Date        : 07/23/2013
    Time        : 08:49:45
    Type        : Information
    Source      : acvpnagent
    Description : Function: CInterfaceRouteMonitorCommon::logInterfaces
    File: .\Routing\InterfaceRouteMonitorCommon.cpp
    Line: 477
    IP Address Interface List:
    FE80:0:0:0:DDA0:24CA:FE35:4D19
    148.110.133.126
    FE80:0:0:0:19A3:961F:C11C:3724
    192.168.164.1
    FE80:0:0:0:80B3:F3CD:CA44:952E
    169.254.149.46
    Date        : 07/23/2013
    Time        : 08:49:48
    Type        : Information
    Source      : acvpninstall
    Description : Function: SetInheritACLsFromParent
    File: .\ACLManager.cpp
    Line: 31
    Attributes for C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\ are 0x2010
    Date        : 07/23/2013
    Time        : 08:49:48
    Type        : Information
    Source      : acvpninstall
    Description : Function: SetInheritACLsFromParent
    File: .\ACLManager.cpp
    Line: 56
    Obtaining ACLs for directory C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\
    Date        : 07/23/2013
    Time        : 08:49:48
    Type        : Information
    Source      : acvpninstall
    Description : Function: SetInheritACLsFromParent
    File: .\ACLManager.cpp
    Line: 31
    Attributes for C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\CustomerExperienceFeedback are 0x2010
    Date        : 07/23/2013
    Time        : 08:49:48
    Type        : Information
    Source      : acvpninstall
    Description : Function: SetInheritACLsFromParent
    File: .\ACLManager.cpp
    Line: 56
    Obtaining ACLs for directory C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\CustomerExperienceFeedback\
    Date        : 07/23/2013
    Time        : 08:49:48
    Type        : Information
    Source      : acvpninstall
    Description : Function: SetInheritACLsFromParent
    File: .\ACLManager.cpp
    Line: 31
    Attributes for C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Help are 0x2010
    Date        : 07/23/2013
    Time        : 08:49:48
    Type        : Information
    Source      : acvpninstall
    Description : Function: SetInheritACLsFromParent
    File: .\ACLManager.cpp
    Line: 56
    Obtaining ACLs for directory C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Help\
    Date        : 07/23/2013
    Time        : 08:49:48
    Type        : Information
    Source      : acvpninstall
    Description : Function: SetInheritACLsFromParent
    File: .\ACLManager.cpp
    Line: 31
    Attributes for C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\l10n are 0x2010
    Date        : 07/23/2013
    Time        : 08:49:48
    Type        : Information
    Source      : acvpninstall
    Description : Function: SetInheritACLsFromParent
    File: .\ACLManager.cpp
    Line: 56
    Obtaining ACLs for directory C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\l10n\
    Date        : 07/23/2013
    Time        : 08:49:48
    Type        : Information
    Source      : acvpninstall
    Description : Function: SetInheritACLsFromParent
    File: .\ACLManager.cpp
    Line: 31
    Attributes for C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile are 0x2010
    Date        : 07/23/2013
    Time        : 08:49:48
    Type        : Information
    Source      : acvpninstall
    Description : Function: SetInheritACLsFromParent
    File: .\ACLManager.cpp
    Line: 56
    Obtaining ACLs for directory C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile\
    Date        : 07/23/2013
    Time        : 08:49:48
    Type        : Information
    Source      : acvpninstall
    Description : Function: SetInheritACLsFromParent
    File: .\ACLManager.cpp
    Line: 31
    Attributes for C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Script are 0x2010
    Date        : 07/23/2013
    Time        : 08:49:48
    Type        : Information
    Source      : acvpninstall
    Description : Function: SetInheritACLsFromParent
    File: .\ACLManager.cpp
    Line: 56
    Obtaining ACLs for directory C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Script\
    Date        : 07/23/2013
    Time        : 08:49:49
    Type        : Information
    Source      : acvpnagent
    Description : Cisco AnyConnect Secure Mobility Client Agent starting, version 3.1.04059
    Date        : 07/23/2013
    Time        : 08:49:50
    Type        : Error
    Source      : acvpnagent
    Description : Function: CBencodeStream::LoadStream
    File: ..\..\PhoneHome\Bencode.cpp
    Line: 126
    Unable to open file for reading
    Date        : 07/23/2013
    Time        : 08:49:50
    Type        : Error
    Source      : acvpnagent
    Description : Function: CBencodeDictionary::CBencodeDictionary
    File: ..\..\PhoneHome\Bencode.cpp
    Line: 1422
    Bencode dictionary internalize failed
    Date        : 07/23/2013
    Time        : 08:49:50
    Type        : Error
    Source      : acvpnagent
    Description : Function: CPhoneHomeVpn::CPhoneHomeVpn
    File: .\PhoneHomeVpn.cpp
    Line: 187
    Failed to create Bencode dictionary
    Date        : 07/23/2013
    Time        : 08:49:50
    Type        : Error
    Source      : acvpnagent
    Description : Function: CPhoneHomeVpn::CreateSingletonInstance
    File: .\PhoneHomeVpn.cpp
    Line: 82
    Invoked Function: CPhoneHomeVpn
    Return Code: -23396343 (0xFE9B0009)
    Description: PHONEHOMEVPN_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:49:50
    Type        : Warning
    Source      : acvpnagent
    Description : Function: CMainThread::CMainThread
    File: .\MainThread.cpp
    Line: 1017
    Invoked Function: CPhoneHomeVpn::CreateSingletonInstance
    Return Code: -23396343 (0xFE9B0009)
    Description: PHONEHOMEVPN_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:49:50
    Type        : Warning
    Source      : acvpnagent
    Description : Function: PluginLoader::QuickCreatePlugin
    File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
    Line: 195
    Invoked Function: PluginLoader::CreateInstance
    Return Code: -29360116 (0xFE40000C)
    Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
    com.cisco.anyconnect.leaf
    Date        : 07/23/2013
    Time        : 08:49:50
    Type        : Information
    Source      : acvpnagent
    Description : Function: MsgCatalog::initMsgCatalog
    File: .\i18n\MsgCatalog.cpp
    Line: 246
    Current locale: fr-LU
    Date        : 07/23/2013
    Time        : 08:49:50
    Type        : Information
    Source      : acvpnagent
    Description : Function: ProfileMgr::loadProfiles
    File: .\ProfileMgr.cpp
    Line: 100
    No profile is available.
    Date        : 07/23/2013
    Time        : 08:49:50
    Type        : Information
    Source      : acvpnagent
    Description : Current Preference Settings:
    ServiceDisable: false
    CertificateStoreOverride: false
    CertificateStore: All
    ShowPreConnectMessage: false
    AutoConnectOnStart: false
    MinimizeOnConnect: true
    LocalLanAccess: false
    AutoReconnect: true
    AutoReconnectBehavior: DisconnectOnSuspend
    UseStartBeforeLogon: false
    AutoUpdate: true
    RSASecurIDIntegration: Automatic
    WindowsLogonEnforcement: SingleLocalLogon
    WindowsVPNEstablishment: LocalUsersOnly
    ProxySettings: Native
    AllowLocalProxyConnections: true
    PPPExclusion: Disable
    PPPExclusionServerIP:
    AutomaticVPNPolicy: false
    TrustedNetworkPolicy: Disconnect
    UntrustedNetworkPolicy: Connect
    TrustedDNSDomains:
    TrustedDNSServers:
    AlwaysOn: false
    ConnectFailurePolicy: Closed
    AllowCaptivePortalRemediation: false
    CaptivePortalRemediationTimeout: 5
    ApplyLastVPNLocalResourceRules: false
    AllowVPNDisconnect: true
    EnableScripting: false
    TerminateScriptOnNextEvent: false
    EnablePostSBLOnConnectScript: true
    AutomaticCertSelection: true
    RetainVpnOnLogoff: false
    UserEnforcement: SameUserOnly
    EnableAutomaticServerSelection: false
    AutoServerSelectionImprovement: 20
    AutoServerSelectionSuspendTime: 4
    AuthenticationTimeout: 12
    SafeWordSofTokenIntegration: false
    AllowIPsecOverSSL: false
    ClearSmartcardPin: true
    IPProtocolSupport: IPv4,IPv6
    AllowManualHostInput: true
    BlockUntrustedServers: true
    PublicProxyServerAddress:
    Date        : 07/23/2013
    Time        : 08:49:50
    Type        : Information
    Source      : acvpnagent
    Description : Function: CCvcConfig::readConfigParamFromFile
    File: .\vpnconfig.cpp
    Line: 5824
    The specified configuration file for MUS service does not exist
    Date        : 07/23/2013
    Time        : 08:49:50
    Type        : Information
    Source      : acvpnagent
    Description : Function: CThread::createThread
    File: .\Utility\Thread.cpp
    Line: 238
    The thread (0x000016C0) has been successfully created.
    Date        : 07/23/2013
    Time        : 08:49:50
    Type        : Information
    Source      : acvpnagent
    Description : Cisco AnyConnect Secure Mobility Client Agent started, version 3.1.04059
    Date        : 07/23/2013
    Time        : 08:49:50
    Type        : Information
    Source      : acvpnagent
    Description : Function: CInterfaceRouteMonitorCommon::logInterfaces
    File: .\Routing\InterfaceRouteMonitorCommon.cpp
    Line: 477
    IP Address Interface List:
    FE80:0:0:0:DDA0:24CA:FE35:4D19
    148.110.133.126
    FE80:0:0:0:19A3:961F:C11C:3724
    192.168.164.1
    FE80:0:0:0:80B3:F3CD:CA44:952E
    169.254.149.46
    Date        : 07/23/2013
    Time        : 08:50:10
    Type        : Information
    Source      : acvpnagent
    Description : Cisco AnyConnect Secure Mobility Client Agent starting, version 3.1.04059
    Date        : 07/23/2013
    Time        : 08:50:11
    Type        : Error
    Source      : acvpnagent
    Description : Function: CBencodeStream::LoadStream
    File: ..\..\PhoneHome\Bencode.cpp
    Line: 126
    Unable to open file for reading
    Date        : 07/23/2013
    Time        : 08:50:11
    Type        : Error
    Source      : acvpnagent
    Description : Function: CBencodeDictionary::CBencodeDictionary
    File: ..\..\PhoneHome\Bencode.cpp
    Line: 1422
    Bencode dictionary internalize failed
    Date        : 07/23/2013
    Time        : 08:50:11
    Type        : Error
    Source      : acvpnagent
    Description : Function: CPhoneHomeVpn::CPhoneHomeVpn
    File: .\PhoneHomeVpn.cpp
    Line: 187
    Failed to create Bencode dictionary
    Date        : 07/23/2013
    Time        : 08:50:11
    Type        : Error
    Source      : acvpnagent
    Description : Function: CPhoneHomeVpn::CreateSingletonInstance
    File: .\PhoneHomeVpn.cpp
    Line: 82
    Invoked Function: CPhoneHomeVpn
    Return Code: -23396343 (0xFE9B0009)
    Description: PHONEHOMEVPN_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:50:11
    Type        : Warning
    Source      : acvpnagent
    Description : Function: CMainThread::CMainThread
    File: .\MainThread.cpp
    Line: 1017
    Invoked Function: CPhoneHomeVpn::CreateSingletonInstance
    Return Code: -23396343 (0xFE9B0009)
    Description: PHONEHOMEVPN_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:50:11
    Type        : Warning
    Source      : acvpnagent
    Description : Function: PluginLoader::QuickCreatePlugin
    File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
    Line: 195
    Invoked Function: PluginLoader::CreateInstance
    Return Code: -29360116 (0xFE40000C)
    Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
    com.cisco.anyconnect.leaf
    Date        : 07/23/2013
    Time        : 08:50:11
    Type        : Information
    Source      : acvpnagent
    Description : Function: MsgCatalog::initMsgCatalog
    File: .\i18n\MsgCatalog.cpp
    Line: 246
    Current locale: fr-LU
    Date        : 07/23/2013
    Time        : 08:50:11
    Type        : Information
    Source      : acvpnagent
    Description : Function: ProfileMgr::loadProfiles
    File: .\ProfileMgr.cpp
    Line: 100
    No profile is available.
    Date        : 07/23/2013
    Time        : 08:50:11
    Type        : Information
    Source      : acvpnagent
    Description : Current Preference Settings:
    ServiceDisable: false
    CertificateStoreOverride: false
    CertificateStore: All
    ShowPreConnectMessage: false
    AutoConnectOnStart: false
    MinimizeOnConnect: true
    LocalLanAccess: false
    AutoReconnect: true
    AutoReconnectBehavior: DisconnectOnSuspend
    UseStartBeforeLogon: false
    AutoUpdate: true
    RSASecurIDIntegration: Automatic
    WindowsLogonEnforcement: SingleLocalLogon
    WindowsVPNEstablishment: LocalUsersOnly
    ProxySettings: Native
    AllowLocalProxyConnections: true
    PPPExclusion: Disable
    PPPExclusionServerIP:
    AutomaticVPNPolicy: false
    TrustedNetworkPolicy: Disconnect
    UntrustedNetworkPolicy: Connect
    TrustedDNSDomains:
    TrustedDNSServers:
    AlwaysOn: false
    ConnectFailurePolicy: Closed
    AllowCaptivePortalRemediation: false
    CaptivePortalRemediationTimeout: 5
    ApplyLastVPNLocalResourceRules: false
    AllowVPNDisconnect: true
    EnableScripting: false
    TerminateScriptOnNextEvent: false
    EnablePostSBLOnConnectScript: true
    AutomaticCertSelection: true
    RetainVpnOnLogoff: false
    UserEnforcement: SameUserOnly
    EnableAutomaticServerSelection: false
    AutoServerSelectionImprovement: 20
    AutoServerSelectionSuspendTime: 4
    AuthenticationTimeout: 12
    SafeWordSofTokenIntegration: false
    AllowIPsecOverSSL: false
    ClearSmartcardPin: true
    IPProtocolSupport: IPv4,IPv6
    AllowManualHostInput: true
    BlockUntrustedServers: true
    PublicProxyServerAddress:
    Date        : 07/23/2013
    Time        : 08:50:11
    Type        : Information
    Source      : acvpnagent
    Description : Function: CCvcConfig::readConfigParamFromFile
    File: .\vpnconfig.cpp
    Line: 5824
    The specified configuration file for MUS service does not exist
    Date        : 07/23/2013
    Time        : 08:50:11
    Type        : Information
    Source      : acvpnagent
    Description : Function: CThread::createThread
    File: .\Utility\Thread.cpp
    Line: 238
    The thread (0x00001F34) has been successfully created.
    Date        : 07/23/2013
    Time        : 08:50:11
    Type        : Information
    Source      : acvpnagent
    Description : Cisco AnyConnect Secure Mobility Client Agent started, version 3.1.04059
    Date        : 07/23/2013
    Time        : 08:50:11
    Type        : Information
    Source      : acvpnagent
    Description : Function: CInterfaceRouteMonitorCommon::logInterfaces
    File: .\Routing\InterfaceRouteMonitorCommon.cpp
    Line: 477
    IP Address Interface List:
    FE80:0:0:0:DDA0:24CA:FE35:4D19
    148.110.133.126
    FE80:0:0:0:19A3:961F:C11C:3724
    192.168.164.1
    FE80:0:0:0:80B3:F3CD:CA44:952E
    169.254.149.46
    Date        : 07/23/2013
    Time        : 08:50:19
    Type        : Information
    Source      : acvpnui
    Description : Cisco AnyConnect Secure Mobility Client GUI started, version 3.1.04059
    Date        : 07/23/2013
    Time        : 08:50:20
    Type        : Information
    Source      : acvpnui
    Description : Initializing vpnapi version 3.1.04059 ().
    Date        : 07/23/2013
    Time        : 08:50:21
    Type        : Information
    Source      : acvpnui
    Description : Function: MsgCatalog::initMsgCatalog
    File: .\i18n\MsgCatalog.cpp
    Line: 246
    Current locale: fr-LU
    Date        : 07/23/2013
    Time        : 08:50:21
    Type        : Information
    Source      : acvpnui
    Description : Function: ProfileMgr::loadProfiles
    File: .\ProfileMgr.cpp
    Line: 100
    No profile is available.
    Date        : 07/23/2013
    Time        : 08:50:21
    Type        : Warning
    Source      : acvpnui
    Description : Function: ClientIfcBase::getCurrentState
    File: .\ClientIfcBase.cpp
    Line: 2058
    API service not ready
    Date        : 07/23/2013
    Time        : 08:50:21
    Type        : Information
    Source      : acvpnui
    Description : Current Preference Settings:
    ServiceDisable: false
    CertificateStoreOverride: false
    CertificateStore: All
    ShowPreConnectMessage: false
    AutoConnectOnStart: false
    MinimizeOnConnect: true
    LocalLanAccess: false
    AutoReconnect: true
    AutoReconnectBehavior: DisconnectOnSuspend
    UseStartBeforeLogon: false
    AutoUpdate: true
    RSASecurIDIntegration: Automatic
    WindowsLogonEnforcement: SingleLocalLogon
    WindowsVPNEstablishment: LocalUsersOnly
    ProxySettings: Native
    AllowLocalProxyConnections: true
    PPPExclusion: Disable
    PPPExclusionServerIP:
    AutomaticVPNPolicy: false
    TrustedNetworkPolicy: Disconnect
    UntrustedNetworkPolicy: Connect
    TrustedDNSDomains:
    TrustedDNSServers:
    AlwaysOn: false
    ConnectFailurePolicy: Closed
    AllowCaptivePortalRemediation: false
    CaptivePortalRemediationTimeout: 5
    ApplyLastVPNLocalResourceRules: false
    AllowVPNDisconnect: true
    EnableScripting: false
    TerminateScriptOnNextEvent: false
    EnablePostSBLOnConnectScript: true
    AutomaticCertSelection: true
    RetainVpnOnLogoff: false
    UserEnforcement: SameUserOnly
    EnableAutomaticServerSelection: false
    AutoServerSelectionImprovement: 20
    AutoServerSelectionSuspendTime: 4
    AuthenticationTimeout: 12
    SafeWordSofTokenIntegration: false
    AllowIPsecOverSSL: false
    ClearSmartcardPin: true
    IPProtocolSupport: IPv4,IPv6
    AllowManualHostInput: true
    BlockUntrustedServers: true
    PublicProxyServerAddress:
    Date        : 07/23/2013
    Time        : 08:50:21
    Type        : Warning
    Source      : acvpnui
    Description : Function: PluginLoader::QuickCreatePlugin
    File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
    Line: 195
    Invoked Function: PluginLoader::CreateInstance
    Return Code: -29360116 (0xFE40000C)
    Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
    com.cisco.anyconnect.nam.api
    Date        : 07/23/2013
    Time        : 08:50:21
    Type        : Information
    Source      : acvpnui
    Description : Function: L2Api::attach
    File: .\L2Api.cpp
    Line: 87
    The NAM/L2 Api could not be found or failed to load, skipping.
    Date        : 07/23/2013
    Time        : 08:50:21
    Type        : Warning
    Source      : acvpnui
    Description : Function: PluginLoader::QuickCreatePlugin
    File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
    Line: 195
    Invoked Function: PluginLoader::CreateInstance
    Return Code: -29360116 (0xFE40000C)
    Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
    com.cisco.anyconnect.websecurity.api
    Date        : 07/23/2013
    Time        : 08:50:21
    Type        : Information
    Source      : acvpnui
    Description : Function: SSApi::attach
    File: ..\common\SSApi.cpp
    Line: 51
    The Web Security API could not be found or failed to load, skipping.
    Date        : 07/23/2013
    Time        : 08:50:21
    Type        : Error
    Source      : acvpnui
    Description : Function: MFDartBox::getDARTInstallDir
    File: .\MFDartBox.cpp
    Line: 332
    Invoked Function: MsiEnumProductsExW
    Return Code: 259 (0x00000103)
    Description: No more data is available.
    Date        : 07/23/2013
    Time        : 08:50:21
    Type        : Warning
    Source      : acvpnui
    Description : Function: ClientIfcBase::getStats
    File: .\ClientIfcBase.cpp
    Line: 1723
    Called when API service not ready.
    Date        : 07/23/2013
    Time        : 08:50:22
    Type        : Error
    Source      : acvpnui
    Description : Function: CSocketTransport::connectTransport
    File: .\IPC\SocketTransport.cpp
    Line: 981
    Invoked Function: ::WSAConnect
    Return Code: 10061 (0x0000274D)
    Description: No connection could be made because the target machine actively refused it.
    Date        : 07/23/2013
    Time        : 08:50:22
    Type        : Error
    Source      : acvpnui
    Description : Function: CIpcTransport::connectIpc
    File: .\IPC\IPCTransport.cpp
    Line: 252
    Invoked Function: CSocketTransport::connectTransport
    Return Code: -31588340 (0xFE1E000C)
    Description: SOCKETTRANSPORT_ERROR_CONNECT
    Date        : 07/23/2013
    Time        : 08:50:22
    Type        : Error
    Source      : acvpnui
    Description : Function: CIpcTransport::terminateIpcConnection
    File: .\IPC\IPCTransport.cpp
    Line: 404
    Invoked Function: CSocketTransport::writeSocketBlocking
    Return Code: -31588319 (0xFE1E0021)
    Description: SOCKETTRANSPORT_ERROR_NO_SOCKET_HANDLE:The socket transport does not possess a valid socket handle.
    Date        : 07/23/2013
    Time        : 08:50:22
    Type        : Error
    Source      : acvpnui
    Description : Function: ApiIpc::initIpc
    File: .\ApiIpc.cpp
    Line: 423
    Invoked Function: CIpcTransport::connectIpc
    Return Code: -31588340 (0xFE1E000C)
    Description: SOCKETTRANSPORT_ERROR_CONNECT
    Date        : 07/23/2013
    Time        : 08:50:22
    Type        : Error
    Source      : acvpnui
    Description : Function: ApiIpc::initiateAgentConnection
    File: .\ApiIpc.cpp
    Line: 336
    Invoked Function: ApiIpc::initIpc
    Return Code: -31588340 (0xFE1E000C)
    Description: SOCKETTRANSPORT_ERROR_CONNECT
    Date        : 07/23/2013
    Time        : 08:50:22
    Type        : Error
    Source      : acvpnui
    Description : Function: ApiIpc::run
    File: .\ApiIpc.cpp
    Line: 570
    Invoked Function: ApiIpc::initiateAgentConnection
    Return Code: -31588340 (0xFE1E000C)
    Description: SOCKETTRANSPORT_ERROR_CONNECT
    Date        : 07/23/2013
    Time        : 08:50:22
    Type        : Error
    Source      : acvpnui
    Description : Function: ClientIfcBase::attach
    File: .\ClientIfcBase.cpp
    Line: 606
    Client failed to attach.
    Date        : 07/23/2013
    Time        : 08:50:25
    Type        : Error
    Source      : acvpnui
    Description : Function: CMainFrame::OnCreate
    File: .\mainfrm.cpp
    Line: 342
    Invoked Function: The VPN service is not responding or available.
    Return Code: -33554423 (0xFE000009)
    Description: GLOBAL_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:50:25
    Type        : Information
    Source      : acvpnui
    Description : Function: ClientIfcBase::detach
    File: .\ClientIfcBase.cpp
    Line: 438
    Shutting down vpnapi
    Date        : 07/23/2013
    Time        : 08:50:25
    Type        : Error
    Source      : acvpnui
    Description : Function: ConnectMgr::activateConnectEvent
    File: .\ConnectMgr.cpp
    Line: 1352
    NULL object. Cannot establish a connection at this time.
    Date        : 07/23/2013
    Time        : 08:50:25
    Type        : Information
    Source      : acvpnui
    Description : Cisco AnyConnect Secure Mobility Client GUI exiting, version 3.1.04059 , return code 0 [0x00000000]
    Date        : 07/23/2013
    Time        : 08:51:12
    Type        : Information
    Source      : acvpnagent
    Description : Cisco AnyConnect Secure Mobility Client Agent starting, version 3.1.04059
    Date        : 07/23/2013
    Time        : 08:51:12
    Type        : Error
    Source      : acvpnagent
    Description : Function: CBencodeStream::LoadStream
    File: ..\..\PhoneHome\Bencode.cpp
    Line: 126
    Unable to open file for reading
    Date        : 07/23/2013
    Time        : 08:51:12
    Type        : Error
    Source      : acvpnagent
    Description : Function: CBencodeDictionary::CBencodeDictionary
    File: ..\..\PhoneHome\Bencode.cpp
    Line: 1422
    Bencode dictionary internalize failed
    Date        : 07/23/2013
    Time        : 08:51:12
    Type        : Error
    Source      : acvpnagent
    Description : Function: CPhoneHomeVpn::CPhoneHomeVpn
    File: .\PhoneHomeVpn.cpp
    Line: 187
    Failed to create Bencode dictionary
    Date        : 07/23/2013
    Time        : 08:51:12
    Type        : Error
    Source      : acvpnagent
    Description : Function: CPhoneHomeVpn::CreateSingletonInstance
    File: .\PhoneHomeVpn.cpp
    Line: 82
    Invoked Function: CPhoneHomeVpn
    Return Code: -23396343 (0xFE9B0009)
    Description: PHONEHOMEVPN_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:51:12
    Type        : Warning
    Source      : acvpnagent
    Description : Function: CMainThread::CMainThread
    File: .\MainThread.cpp
    Line: 1017
    Invoked Function: CPhoneHomeVpn::CreateSingletonInstance
    Return Code: -23396343 (0xFE9B0009)
    Description: PHONEHOMEVPN_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:51:12
    Type        : Warning
    Source      : acvpnagent
    Description : Function: PluginLoader::QuickCreatePlugin
    File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
    Line: 195
    Invoked Function: PluginLoader::CreateInstance
    Return Code: -29360116 (0xFE40000C)
    Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
    com.cisco.anyconnect.leaf
    Date        : 07/23/2013
    Time        : 08:51:12
    Type        : Information
    Source      : acvpnagent
    Description : Function: MsgCatalog::initMsgCatalog
    File: .\i18n\MsgCatalog.cpp
    Line: 246
    Current locale: fr-LU
    Date        : 07/23/2013
    Time        : 08:51:12
    Type        : Information
    Source      : acvpnagent
    Description : Function: ProfileMgr::loadProfiles
    File: .\ProfileMgr.cpp
    Line: 100
    No profile is available.
    Date        : 07/23/2013
    Time        : 08:51:12
    Type        : Information
    Source      : acvpnagent
    Description : Current Preference Settings:
    ServiceDisable: false
    CertificateStoreOverride: false
    CertificateStore: All
    ShowPreConnectMessage: false
    AutoConnectOnStart: false
    MinimizeOnConnect: true
    LocalLanAccess: false
    AutoReconnect: true
    AutoReconnectBehavior: DisconnectOnSuspend
    UseStartBeforeLogon: false
    AutoUpdate: true
    RSASecurIDIntegration: Automatic
    WindowsLogonEnforcement: SingleLocalLogon
    WindowsVPNEstablishment: LocalUsersOnly
    ProxySettings: Native
    AllowLocalProxyConnections: true
    PPPExclusion: Disable
    PPPExclusionServerIP:
    AutomaticVPNPolicy: false
    TrustedNetworkPolicy: Disconnect
    UntrustedNetworkPolicy: Connect
    TrustedDNSDomains:
    TrustedDNSServers:
    AlwaysOn: false
    ConnectFailurePolicy: Closed
    AllowCaptivePortalRemediation: false
    CaptivePortalRemediationTimeout: 5
    ApplyLastVPNLocalResourceRules: false
    AllowVPNDisconnect: true
    EnableScripting: false
    TerminateScriptOnNextEvent: false
    EnablePostSBLOnConnectScript: true
    AutomaticCertSelection: true
    RetainVpnOnLogoff: false
    UserEnforcement: SameUserOnly
    EnableAutomaticServerSelection: false
    AutoServerSelectionImprovement: 20
    AutoServerSelectionSuspendTime: 4
    AuthenticationTimeout: 12
    SafeWordSofTokenIntegration: false
    AllowIPsecOverSSL: false
    ClearSmartcardPin: true
    IPProtocolSupport: IPv4,IPv6
    AllowManualHostInput: true
    BlockUntrustedServers: true
    PublicProxyServerAddress:
    Date        : 07/23/2013
    Time        : 08:51:12
    Type        : Information
    Source      : acvpnagent
    Description : Function: CCvcConfig::readConfigParamFromFile
    File: .\vpnconfig.cpp
    Line: 5824
    The specified configuration file for MUS service does not exist
    Date        : 07/23/2013
    Time        : 08:51:12
    Type        : Information
    Source      : acvpnagent
    Description : Function: CThread::createThread
    File: .\Utility\Thread.cpp
    Line: 238
    The thread (0x0000162C) has been successfully created.
    Date        : 07/23/2013
    Time        : 08:51:12
    Type        : Information
    Source      : acvpnagent
    Description : Cisco AnyConnect Secure Mobility Client Agent started, version 3.1.04059
    Date        : 07/23/2013
    Time        : 08:51:12
    Type        : Information
    Source      : acvpnagent
    Description : Function: CInterfaceRouteMonitorCommon::logInterfaces
    File: .\Routing\InterfaceRouteMonitorCommon.cpp
    Line: 477
    IP Address Interface List:
    FE80:0:0:0:DDA0:24CA:FE35:4D19
    148.110.133.126
    FE80:0:0:0:19A3:961F:C11C:3724
    192.168.164.1
    FE80:0:0:0:80B3:F3CD:CA44:952E
    169.254.149.46
    Date        : 07/23/2013
    Time        : 08:52:13
    Type        : Information
    Source      : acvpnagent
    Description : Cisco AnyConnect Secure Mobility Client Agent starting, version 3.1.04059
    Date        : 07/23/2013
    Time        : 08:52:13
    Type        : Error
    Source      : acvpnagent
    Description : Function: CBencodeStream::LoadStream
    File: ..\..\PhoneHome\Bencode.cpp
    Line: 126
    Unable to open file for reading
    Date        : 07/23/2013
    Time        : 08:52:13
    Type        : Error
    Source      : acvpnagent
    Description : Function: CBencodeDictionary::CBencodeDictionary
    File: ..\..\PhoneHome\Bencode.cpp
    Line: 1422
    Bencode dictionary internalize failed
    Date        : 07/23/2013
    Time        : 08:52:13
    Type        : Error
    Source      : acvpnagent
    Description : Function: CPhoneHomeVpn::CPhoneHomeVpn
    File: .\PhoneHomeVpn.cpp
    Line: 187
    Failed to create Bencode dictionary
    Date        : 07/23/2013
    Time        : 08:52:13
    Type        : Error
    Source      : acvpnagent
    Description : Function: CPhoneHomeVpn::CreateSingletonInstance
    File: .\PhoneHomeVpn.cpp
    Line: 82
    Invoked Function: CPhoneHomeVpn
    Return Code: -23396343 (0xFE9B0009)
    Description: PHONEHOMEVPN_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:52:13
    Type        : Warning
    Source      : acvpnagent
    Description : Function: CMainThread::CMainThread
    File: .\MainThread.cpp
    Line: 1017
    Invoked Function: CPhoneHomeVpn::CreateSingletonInstance
    Return Code: -23396343 (0xFE9B0009)
    Description: PHONEHOMEVPN_ERROR_UNEXPECTED
    Date        : 07/23/2013
    Time        : 08:52:13
    Type        : Warning
    Source      : acvpnagent
    Description : Function: PluginLoader::QuickCreatePlugin
    File: c:\temp\build\thehoff\ElGreco_MR40.391570230547\ElGreco_MR4\vpn\Common\Utility/PluginLoader.h
    Line: 195
    Invoked Function: PluginLoader::CreateInstance
    Return Code: -29360116 (0xFE40000C)
    Description: PLUGINLOADER_ERROR_COULD_NOT_CREATE
    com.cisco.anyconnect.leaf
    Date        : 07/23/2013
    Time        : 08:52:13
    Type        : Information
    Source      : acvpnagent
    Description : Function: MsgCatalog::initMsgCatalog
    File: .\i18n\MsgCatalog.cpp
    Line: 246
    Current locale: fr-LU
    Date        : 07/23/2013
    Time        : 08:52:13
    Type        : Information
    Source      : acvpnagent
    Description : Function: ProfileMgr::loadProfiles
    File: .\ProfileMgr.cpp
    Line: 100
    No profile is available.
    Date        : 07/23/2013
    Time        : 08:52:13
    Type        : Information
    Source      : acvpnagent
    Description : Current Preference Settings:
    ServiceDisable: false
    CertificateStoreOverride: false
    CertificateStore: All
    ShowPreConnectMessage: false
    AutoConnectOnStart: false
    MinimizeOnConnect: true
    LocalLanAccess: false
    AutoReconnect: true
    AutoReconnectBehavior: DisconnectOnSuspend
    UseStartBeforeLogon: false
    AutoUpdate: true
    RSASecurIDIntegration: Automatic
    WindowsLogonEnforcement: SingleLocalLogon
    WindowsVPNEstablishment: LocalUsersOnly
    ProxySettings: Native
    AllowLocalProxyConnections: true
    PPPExclusion: Disable
    PPPExclusionServerIP:
    AutomaticVPNPolicy: false
    TrustedNetworkPolicy: Disconnect
    UntrustedNetworkP

    There seem to be much more problems with 3.1.04049
    Especially with certificate authentication.
    I opened some TAC cases.
    Try 3.1.04063 that came out at 07-24-13.
    TAC said that there are some fixes in it...

  • Cisco AnyConnect Secured Mobility Client not saving the VPN url after disconnecting from session/restarting client

    Hello there.
    I am having a problem with Cisco AnyConnect version 3.1.04072. When one of my colleagues disconnects from the VPN session, closes out the program, and then later on, reopens the client, the address that he manually entered did not save and it's defaulting on the two now-defunct VPN servers listed.
    Here's an example to see if it makes more sense:
    -User opens Cisco AnyConnect. By default, there are two selections available on the pulldown:
    SSLVPN.abcdefg.com
    access.abcdefg.ca
    These two VPN servers are now defunct and we use a new VPN server:
    access.abcdefg.com
    The user has to manually type it in. He is now able to connect. However, when disconnected. Regardless if the program is closed or not, it does not save the new VPN server address, rather goes back to the default two VPN servers listed.
    I've checked XML, HTML, registry keys, sys files, dll files to see if I can change the default servers manually. No sign of it.
    I'm hoping that someone out there knows a solution to fix it.
    Thanks in advance!

    Hi Vergel ,
    You can create Anyconnect client profile on ASA. In this profile , you can define the hostname/IP that you wish to connect , along with hostname/IP that should be displayed on the client.
    In the client profile , you can define these parameters - "HostName" and "HostAddress" as "access.abcdefg.com" so that any user , who tries to connects , will see "access.abcdefg.com" as the name displayed in the anyconnect connect field.
    On the client, the xml profile (C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile) [Win 7] can be seen using those parameters as follows:-
            <HostEntry>
                <HostName>access.abcdefg.com</HostName>
                <HostAddress>access.abcdefg.com</HostAddress>
            </HostEntry>
    Ref:- http://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyconnect30/administration/guide/anyconnectadmin30/ac03vpn.html#89103
    Additionally, you can try to delete preferences.xml file to remove the redundant hostnames from the anyconnect connect filed.
    Path for preferences.xml is C:\Users\Cisco\AppData\Local\Cisco\Cisco AnyConnect Secure Mobility Client (Win 7),
    Hope this helps.
    Regards,
    Dinesh Moudgil
    P.S. Please rate helpful posts.

  • Web Center app with ADF Security - login problem

    I have a custome Oracle Web Center app.
    I have a page.html with an embedded login form posting to j_security_check. I've configured the ADF security policies to redirect to a JSPX on successful login.
    When I try the correct username/password, I get redirected not to the page I defined in ADF, but to the root page http://127.0.0.1:7101/MyApp-ViewController-context-root/
    and i get
    Error 403--Forbidden
    I've checked the weblogic.xml as per http://andrejusb.blogspot.com/2009/12/solving-error-403-forbidden-in-adf.html, all the required entries are there.
    This works fine if i use a Login link with
    destination="#{'/adfAuthentication?login=true&amp;end_url=/faces/postLogin.jspx'} "
    which redirects to the default login.html and then to the right page. I've copied the form from the default login.html into my master HTML page.
    Hope my question is clear. Any suggestions why it is going to the wrong URL after login.
    Is there anything specific I should see in the jazn-data.xml or web.xml regarding the post-login URL since i cant see that in either.
    P.S. Have been advised to try here when I originally asked this in the WebCenter forum. Web Center app ADF Security - login problem
    Edited by: new_to_webcenter on 18-Jan-2011 05:25

    Thanks for your response Frank.
    The web.xml has
    <security-constraint>
    <web-resource-collection>
    <web-resource-name>adfAuthentication</web-resource-name>
    <url-pattern>/adfAuthentication</url-pattern>
    </web-resource-collection>
    <auth-constraint>
    <role-name>valid-users</role-name>
    </auth-constraint>
    </security-constraint>
    <login-config>
    <auth-method>FORM</auth-method>
    <form-login-config>
    <form-login-page>/login.html</form-login-page>
    <form-error-page>/error.html</form-error-page>
    </form-login-config>
    </login-config>
    When configuring ADF Security via JDev , I chose "Redirect upon successful authentication" to the Welcome Page
    "/faces/postLogin.jspx"
    this then adds into web.xml
    <servlet>
    <servlet-name>adfAuthentication</servlet-name>
    <servlet-class>oracle.adf.share.security.authentication.AuthenticationServlet</servlet-class>
    <init-param>
    <param-name>success_url</param-name>
    <param-value>/faces/postLogin.jspx</param-value>
    </init-param>
    <load-on-startup>1</load-on-startup>
    </servlet>
    So the sequence which works is:
    Login via the '/adfAuthentication?login=true&end_url=/faces/postLogin.jspx' and this redirects to login.html (OOTB form which posts to j_security_check) and then to the postLogin.jspx
    I'm trying to do away with a Login link, and trying the simple login form embedded in my page alongwith other content.
    So should the form be posting to j_security_check directly or to the adfAuthentication ?

  • Configuration File goes bad in Cisco AnyConnect Secure Mobility Client.

    Hi everyone
    We are running a Cisco ISE Version: 1.3.0.876 Patch 1 for 802.1X deployment (Wired + Wireless) with posture assessment where the supplicant for the endpoint is Cisco Anyconnect Secure Mobility Client v4.0.00061.
    Symptoms:
    The Configuration is working fine both Wired and Wireless, but the issue is that some user suddenly start to have issue connecting Wireless with the Cisco Anyconnect dislpaying System Scan: Bypassing Anconnect Scan
    (Some info are masked)
    and When I digged into this found that the configuration.xml files in the path: C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Network Access Manager\newConfigFiles is renamed automatically into configuration_bad.xml.
    Workaround:
    Copy and paste a normal configuration.xml into the same path again.
    Restart the Cisco anyconnect services or restart the Endpoint.
    Question:
    So was wondering if anybody has a clue why this configutatyion.xml turned into bad??
    I'm goin to dig into the Event Viewer for logs about this before going to Cisco TAC

    first poster -
    "Downloads from random internet sites are 5-10 times faster than anything from a server on the VPN."
    Your corporate network may just have too little bandwidth, your taking a poor internet route between carriers (ISP's are often maxed out believe it or not), there is a speed an duplex problem or you have a bad MTU. test all of them. your pc's MTU should be 1300. MAX on all interfaces. use the setmtu.exe tool.
    Jcohen - if you disable the IPS on the ASA does the slow transfer problem go away?

Maybe you are looking for

  • No picture when connecting Mac Mini GMA 950 to Panasonic TX-PF42G10 via HDM

    Hi ! I have a Mac Mini Core Duo 1,66 GHz with GMA950 chipset (MacMini1,1 sold from february 2006 to september 2006) which I was using as a Plex mediacenter connected to an old CRT display via an s-video adapter. I purchased a brand new Panasonic TX-P

  • Screen sharing and vnc not working

    OSX Lion Screen Sharing I was using screen sharing on OSX Leopard using VNC Viewer.  Even after upgrading to OSX Lion this worked ok.  But then the other day there was an update to screen sharing which I applied.  This first, switced screen sharing o

  • Settings for Purchase Order output using services for MM-SUS scenario?

    Dear Gurus, I am configuring the service procurement classic and plan driven procurement for MM-SUS environment. We are on SAP SRM 7.01/ECC 6 EHP5. I need to maintain the below settings for PO output: 1. RUN transaction SWETYPV 2. IN the object types

  • Shareing Time Capsule files across WAN

    I want to share files on my time capsule with a friend across the internet.  Is this possible?  My network configuration is as follows:   ISP Modem/Router - Time Capsule - Airport Extreme (extending network).  I have read multiple articles about how

  • How to set a value in a managed bean when click on a button

    Dear all I have a managed bean that contains an attribute of type string as follow: the attribute name is taskFlowId package dhamanADM.view.beans; import oracle.adf.controller.TaskFlowId; public class dynamicTaskFlowManager {    private String taskFl