Secure Store Database and ActionType Entry Value Not Documented?

Hello,
I enabled auditing of Secure Store operations when I implemented SharePoint 2013. I am just now getting around to looking at the entries in the SSSAudit table and have discovered that there is an entry in the ActionType column that is undocumented in the Secure
Store Database Protocol Specification. The entry is a value of 137 but the protocol specification only goes to 136 (A SSS user has set his/her own credentials in the SSS store.).
Can someone please tell me what the value of 137 is in the ActionType column in the SSSAudit table of the Secure Store database? I need this for documentation and auditing purposes.
Thank you in advance!

Similar Messages

WebLogic Server Exception for RDBMS Security Store Database

Hi All,
I am getting List of Exception when I am trying to create a domain based on [RDBMS Security Store Database |http://www.atilimited.net/zakir/err/weblogic2.JPG] by configuring YES of [customize Environment and Services Settings|http://www.atilimited.net/zakir/err/weblogic1.JPG] .
When I going to Start that weblogic domain then I am getting list of [error/Exception|http://www.atilimited.net/zakir/err/AdminServer.log] such as
weblogic.security.service.SecurityServiceException: com.bea.common.engine.ServiceInitializationException: weblogic.security.spi.ProviderInitializationException: A failure occurred attempting to load LDIF for provider Authorizer from file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\XACMLAuthorizerInit.ldift.
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(Unknown Source)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(Unknown Source)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealms(Unknown Source)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(Unknown Source)
     at weblogic.security.service.SecurityServiceManager.initialize(Unknown Source)
     at weblogic.security.SecurityService.start(SecurityService.java:141)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
com.bea.common.engine.ServiceInitializationException: weblogic.security.spi.ProviderInitializationException: A failure occurred attempting to load LDIF for provider Authorizer from file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\XACMLAuthorizerInit.ldift.
     at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:365)
     at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:315)
     at com.bea.common.engine.internal.ServiceEngineImpl.lookupService(ServiceEngineImpl.java:257)
     at com.bea.common.engine.internal.ServicesImpl.getService(ServicesImpl.java:72)
     at weblogic.security.service.CSSWLSDelegateImpl.getService(Unknown Source)
     at com.bea.security.css.CSS.getService(CSS.java:122)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(Unknown Source)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(Unknown Source)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealms(Unknown Source)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(Unknown Source)
     at weblogic.security.service.SecurityServiceManager.initialize(Unknown Source)
     at weblogic.security.SecurityService.start(SecurityService.java:141)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
........................................................Please help me how can I solve this issue.
Thanks
zakir
=====

Did you create the tables in the database?
[http://edocs.bea.com/wls/docs103/secmanage/rdbms.html#wp1105241|http://edocs.bea.com/wls/docs103/secmanage/rdbms.html#wp1105241]

The code you entered is invalid. Please try again. I bought the card at my school book store today and the code is not activating. Paid almost $250 for this I need this to activate.

I bought the card at my school book store today and the code is not activating. Paid almost $250 for this I need this to activate. It is for Adobe Creative Cloud 12- month prepaid membership. The card says it is windows and mac compatible and I am using Windows. It is Student and Teacher Edition and I am a student. I also have light room 5 which was purchased the same way and it works.

Hi johnashton07,
We have noticed that some of our customer's tends to miss-type the code as there is a bit of confusion around the font of the redemption code.
Common miss-type issues found are mentioned below.
Zero(0) - letter "O" as in Oscar.
Five (5) - Letter "S" as in Sam.
Two (2) - Letter "Z" as in Zolo.
Kindly try replacing these characters and please revert to the PM.
Thanks,
Atul Saini

I have 2 iPads with the same log in and password details. How do I make them independent of each other so that contacts and calendar entries are not duplicated

I have 2 iPads. When gifting one to my wife I did not change the log in and security details. Consequently any contacts and calendar entries are duplicated. How do I make the iPads independent so that the foregoing duplications are eliminated?
Thank you

The logins on the iPads, for example the iTunes store can be the same if you share an iTunes account, this will not effect the Contacts/Calendars unless you are using iCloud to sync Calendar/Contacts in which case just setup a new iCloud account for your Wife and change the iCloud settings on her iPad to this new account.
Unfortunately the contacts if syncing with your computer will be the same as it can only sync from the given contacts on your computer.
You can use a different login to the computer for your wife and she can then have her own contacts.
If your Contacts application on your compuer has Categories/Grouping you can tell iTunes to sync certain Categories/Groups to each iPad, that way splitting up the contacts on your computer for each iPad.
The same is true for the Calendar if you only have the one calendar it will sync it for both of you, the iPad settings in iTunes has the option to pick a Calendar if you have more then one.
One option is to use an online calendar such as Google Calendar and sync to and from it with your iPad that way the Calendars would be individual.

Server hangs and session variable value not maintained.

dear all,
this is exteremetly urgent. i upgraded my tomcat to 4.1.24.but i have problems running the same code which was working earlier, i get null in the value of session variable. and also get the following error
////////////////error got /////////////
Compile failed; see the compiler error output for details.
at org.apache.tools.ant.taskdefs.Javac.compile(Javac.java:842)
at org.apache.tools.ant.taskdefs.Javac.execute(Javac.java:682)
at org.apache.jasper.compiler.Compiler.generateClass(Compiler.java:317)
at org.apache.jasper.compiler.Compiler.compile(Compiler.java:370)
at org.apache.jasper.JspCompilationContext.compile(JspCompilationContext
.java:473)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper
.java:190)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:2
95)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:241)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Appl
icationFilterChain.java:247)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationF
ilterChain.java:193)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperV
alve.java:256)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContex
t.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
a:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextV
alve.java:191)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContex
t.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
a:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:
2415)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.j
ava:180)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContex
t.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatche
rValve.java:171)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContex
t.invokeNext(StandardPipeline.java:641)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.j
ava:172)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContex
t.invokeNext(StandardPipeline.java:641)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
a:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineVal
ve.java:174)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContex
t.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
a:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.coyote.tomcat4.CoyoteAdapter.service(CoyoteAdapter.java:22
3)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java
:594)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.proce
ssConnection(Http11Protocol.java:392)
at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java
:565)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadP
ool.java:619)
at java.lang.Thread.run(Thread.java:536)
///////////////end of error messsge ////////////
the code where i am getting this message is as follows
<%@ page session="true"%>
<HTML>
<HEAD><TITLE> LOGGED IN ok</TITLE> </HEAD>
<%@ page import="java.sql.*" %>
<%! // declaring variables
String s = "";
java.sql.ResultSet rs=null;
java.sql.Connection con;
java.sql.Statement stmt=null,stmt1=null;
String username = "";
String password = "";
String Ousername = "";
String Opassword = "";
String changepass="";
String usertype ="",useremail="",EmpName="";
%>
<body>
     <%
     try
     //set session for max of 100 milliseconds
     // session.setMaxInactiveInterval(10000);
     Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
     con = java.sql.DriverManager.getConnection("jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};" +"DBQ=c:/vishal/HelpDesk.mdb;DriverID=22;READONLY=false","","");
          stmt = con.createStatement();
          s = "select * from LoginUser";
     username = request.getParameter("LogonId"); //get this through prev. form
     password = request.getParameter("txtPassword");
     out.println(username + " " + password);
     // make explicitly to lower case
     username = username.toLowerCase();
     rs = stmt.executeQuery(s);
                    while(rs.next())
                    //getting data from database
                    Ousername = rs.getString("EmpName");
                    Opassword = rs.getString("Password");
                    useremail = rs.getString("EmailId");
                    usertype = rs.getString("UserType");
                    if(Opassword.equals(password) && Ousername.equals(username)) //found match correct entry
                         changepass = request.getParameter("PasswordNew");
                         if(changepass != null)
                         stmt1 = con.createStatement(java.sql.ResultSet.TYPE_SCROLL_INSENSITIVE,java.sql.ResultSet.CONCUR_UPDATABLE);
                         s = "update LoginUser set Password = '" + changepass + "' where EmpName = '" + username +"'";
                         out.println(s);
                         stmt1.executeUpdate(s);
                         stmt1.close();
                         if(usertype.equals("User") == false)//ie admin
                         session.setAttribute("username",username);
************************this value not maintained *********************
                         session.setAttribute("useremail",useremail);
                         session.setAttribute("usertype",usertype);
************************this value not maintained *********************
                         //closing connections
                         %>
                              <jsp:forward page= "ComplaintType.jsp" />
                         <%
                         else //user
                         EmpName = username;
                         session.setAttribute("EmpName",EmpName);
                         session.setAttribute("useremail",useremail);
                         //closing connections
                         %>
                         <jsp:forward page="ComplaintCategory.jsp" />
                         <%
                         }//end if
                    }//while loop
                    //first closing connections then forwarding
     %>
                    <jsp:forward page="InvalidLOGIN.jsp" />
                    <%
                    ///rs.close();
                    ////closing
                    //stmt.close();
     // con.close();
     }//try
          catch(Exception ep)
          out.println(ep);
          System.exit(1);
     %>
</BODY>
</HTML>

hi all,
thanx a lot for your help,specially hari52
hari52 strangely enough the code started working,but
now i have another problem
after a while my server hangs or gets shutdown ,a
message is shown as
"java.exe has generated error and will be shutdown"
i know that more connections can be a prob. but i
make sure that connections r closed on each page,also
i am a newbie and do not have the time at present to
learn abt. connection pool ,can this problem be
solved easily?
it would be a great help again on your part,
thanx again,You remove the System.exit(1) line from the code inside the catch block
and try again. That's the reason tomcat getting down. System.exit(1) should not be used inside jsp. it will make the underlaying Servlet Engine to shutdown.

Secure Store Service and Schedule Data Refresh

Hi
Can you please let us know how many (max) target application's we can create under 1 secure store service application?
As we know, Manage Data Refresh feature is only available for PowerPivot Service Report and we can access it from Sharepoint to schedule the Workbook for Data Refresh.
As per our requirement, we need to build a interface to use this Schedule data refresh feature in a separate browser not from SharePoint. Please let us know how to build this interface, is there any option to use API Web Service.
Thanks in advance.
Regards
K.V.B.Gururaaja

Hi,
For your first question, refer to the following link:
https://social.technet.microsoft.com/Forums/en-US/ab7f24eb-0cbf-4101-931e-1f89446e2149/secure-store-service-target-application-max-number?forum=sharepointgeneral
For your second problem, could you offer a screenshot about what is your intention?
Besides, take a look at the article about PowerPivot data refresh options:
http://www.sqlchick.com/entries/2012/11/17/powerpivot-data-refresh-options.html
Best Regards,
Lisa Chen
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Lisa Chen
TechNet Community Support

Aging report and Control account value not matching

Hi All
The value what i am getting from Vendor liabilities aging and Control account is not matching for the same dates, all my parameters or selection criteria are same
Same report if i am taking for the current date it giving correctly,
If i am trying for a previous day the problem is happening
How can i solve this issue

Hi,
Please check if the transactions are done for different Control Accounts and both the account balances are included in the Aging Report.
Also, check that ALL the customers/vendor groups are taken.
Make sure that you are running the backdated aging with the checkbox as mentioned in the Note 800294.
If still facing problems may be you can provide with more details as to what the control account balances and what is the Aging, difference.
PS: Check if there is any manual journal entry is created in the control account?
Kind Regards,
Jitin
SAP Business One Forum Team

TDMS database and treat its values as real time data.

Hi,
I'm newbie in using labview. Actually I wanna import data from TDMS database and treat it as real time data. Although I have done the first part which is importing the data inside the program by reading TDMS and selecting channels and groups, I couldn't find way for second part which is treating data as real time one. I tried Build Waveform, but it didnt work. Would you please help me to solve this problem ? I appreciate your helps.

reza_amin,
I don't understand your word "build waveform". If you write waveform data to a tdms file, you will read waveform data directly from the tdms file.
If you are using LabVIEW 2012 (download from http://www.ni.com/trylabview), you could find a tdms example VI in "C:\Program Files\National Instruments\LabVIEW 2012\examples\file\plat-tdms.llb\TDMS - Concurrent File Access.vi". This example VI demonstrates how to write Sine Waveform into a tdms file and read the Sine Waveform from the tdms file.
Hope this helps and enjoy your LabVIEW journey. :-)
Best Regards,
Bo Xie

Security Stories - funny and not-so-funny

Here we are on the last day of this event. Lots of good questions and answers.
I don't have anything useful to contribute, so I'll start this thread with a couple of stories illustrating how easy it is to get into trouble on the interwebs. You can have all the security software in the world, but it won't eliminate PEBKAC. I blame a certain community supermod for encouraging this...
1) My wife yelled at me that her computer was messed up. (It's always my fault) She couldn't open an email attachment. I asked her to show me. It was from a familiar email address, but the contents were in broken English and the attachment was waaay suspicious. She was just curious to see what it was.
The reason she couldn't open it was that the AV software had popped up a window screaming "do you really, really want to to open this!!!!!" Fortunately the popup was behind the browser window and she couldn't click "OK".
2) A co-worker complained that his desktop had been running slow for a month or so. I immediately noticed that the NIC LED was constantly blinking. Welcome to the botnet. We started playing 20 questions, and I finally got this out of him:
He had gotten an email - seemingly from corporate HQ (we were briefly owned by a large company) saying something like "Corporate has discovered infections on several machines. If you find a file "..\windows\system32\something-important.dll" remove it immediately!" He did. 24 hours later here came another email "Sincere apologies. The previous email was incorrect, and we should not have asked you to remove that dll. Please reinstall the attached file." He did. Hilarity ensued.
He didn't bother to run this by the IT guy (me, sort of) for a month.
3) A co-worker's spouse was visiting, and asked to use our wifi connection to conduct some of her business. She needed to contact the mother ship in another state. Check her email - or so I thought. After a while, she came into my office and said something like " the IT guy at my office needs the password to your router. He needs to change your firewall settings so my app will work." He was running a remote desktop on her machine and had already tried to fiddle the router without asking.
Insane. Criminally.
Anyone care to add to this? Or petition the mods to remove it?
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Good idea, Z. A bit of levity doesn't detract from learning.
True story:
On one of the forums I admin, there was someone who was having ongoing problems with his computer. He was a regular contributor to the forum, although in the general areas, not with computer help. The problem I encountered with him is that he wouldn't follow through or would avoid answering questions that were directed at determining the nature of the problem. Instead, he would claim to reinstall the OS and all would be well . . . for a while anyway.
Finally we learned the real reason he had ongoing problems with his computer.
QUOTE:
"i am CERTAIN it is running hot, b/c, among other things, I cover all the airvents with a TOWEL while it is running!
yeah, i kno this is not ideal, but there are reasons (flying liquids!) why I am afraid to leave it exposed. anyway, i figured this was adding wear and tear to the machine, but i didn't think it was a cause of big problems in the SHORT-term.
HOWEVER, last night i left it uncovered (lid closed but no towel) and pointed a FAN at it. as of this morning (11 hrs or so) it is STILL running w/o a crash!"
Microsoft MVP, Consumer Security
Take a walk through the "Security Garden" -- Where Everything is Coming up Roses!
Twitter: http://twitter.com/SecurityGarden
Security Information and Malware Removal @LandzDown Forum

Bug Report: enum metadata containing 'true' and 'false' string values not displaying unless "goosed"

I have metadata whose value is 'true' but the corresponding enum title is not being displayed. If I set it explicitly to 'true' it will be displayed even though the value is the same as it was.
Likewise for 'false'.
I do not have this problem with enums that have any other string values i.e. 'yes' and 'no' function properly, but 'true' and 'false' do not.
Rob

Due to better understanding on my part, and the fixes in Beta 2.2, the
issues raised in this thread are put to rest.
Abe White wrote:
>
We'll investigate further. Stay tuned...
"David Ezzio" <[email protected]> wrote in message
news:[email protected]..
Abe,
Actually, it doesn't make sense. The first iteration shows
jdoPostLoad is called just prior to using the fields of Widget and Box.
After the commit, the instances are not cleared. So far, so good.
In the second iteration, we see that jdoPreClear is called, but
jdoPostLoad is not called. Yet the values are there for use during the
call to Widget.toString() and Box.toString() within the iteration. How
did that happen?
On the third iteration, now the value of name is null, but last we
looked it was available in the second iteration. Other than that, I
agree that the third iteration looks ok, since it is being cleared and
loaded prior to use. But in the jdoPreClear, the values should be there
since the values were used in the previous iteration and are not cleared
at transaction commit due to retainValues == true.
David
Abe White wrote:
David --
I believe the behavior you are seeing to be correct. Section 5.6.1 of
the
JDO spec outlines the behavior of persistent-nontransactional instancesused
with data store transactions. As you can see, persistentnon-transactional
instances are cleared when they enter a transaction; thus the calls to
jdoPreClear. When the default fetch group is loaded again (like whenyou
access the name of the widget) a call to jdoPostLoad is made.
You are seeing the name of one instance as 'null' in the third iterationof
your loop because the instance has been cleared in the second iteration,and
the jdoPreClear method is not modified by the enhancer (see section10.3).
Make sense?

OEM: error connecting to database: java.exe - Entry point not found

Greetings all. I have oracle 11g installed on a system and wanted to also install Enterprise Manager from 10g. The installation went smoothly, but when I try to connect to a database using OEM, I get an error stating "The procedure entry point longjmp could not be located in the dynamic link library orauts.dll.
I've seen many threads indicating that environment variables are not set correctly, but regardless of which installation I specify for ORACLE_HOME and PATH, I get this error. Any suggestions would be greatly appreciated. Thanks in advance for your responses.
Roland

See this thread.
Re: Error while starting the report server

MIRO and Part II value not matching-so many invoices are pending please

Dear sir
we are facing problem in Miro(Invoice verification)
while goods receipt we changed the base value and also we entred vendor invoice value (migo),As same as Part I we posted Part II also
But while doing MIRO excise values it is picking from PO base value only.not picking from the Migo Base value
Can anybody help me in this.
Thanks
Maruthi S

hai,
Std SAP will copy values from PO history to MIRO screen.if you want change you can change as per your GR value.otherwise post it and do subsquent debit /credit .

My calendar in 10.8.2 never finishes updating and new entries are not syncing to cloud

When i open the Calendar app and choose to refresh my calendars the 'Calendar -- Updating...' message at the top of the calendar window never goes away and the new entries on my computer do not make it to the cloud. Additionaly new entries on the cloud - created on my phone or on the web - do not make it to my calendar.
Any sugguestions?

Good suggestion. I did that and it seems to have worked! It synced through the manual sync, of course, but I have also now made a couple of test entries and they do go through both ways - ALTHOUGH it takes much longer (a few minutes) to show on my phone when the entry is originated in my computer, whereas when the entry is done in my phone it takes literally two seconds to show up on my computer. I'll take it, though, as long as it continues to work.
thank you!

WCS and WLC AP values not fully in sync.

I have recently added several new aps on my network,after they connect to the controller, I set a hostname, and change the ip address to a static. However, WCS still sees the aps by the old ip and host name despite going into each one, hitting audit, and then save, any way to fix this? Thanks.

You may want to also consider the following:
1) Both the WCS and the WLC need to be at the same major revs (i.e.: The if the WCS is at v4.2, then the WLC should also be at 4.2). Failure to do so results in some significantly bizarre behavior such as errors after an audit - at least that was my experience.
2) You may have better success if you make the change from the WCS which pushes the change to the WLC and that way the WCS is already aware of the change. (Normally, this should work - I know of one instance where it does not: changing Master Controller Mode from the WCS).
3) If you feel strongly about making the change in the WLC (and are running a newer version of code in the WCS/WLC - i.e.: 4.x), there is a setting that forces the WLC to send configuration changes to the WCS once APPLY and "Save Configuration" are clicked:
From the *WCS*, click on Configure->Controllers and click on the controller you wish to change, and check the "Refresh on Save Config Trap" check box and click OK.
This will cause the controller to push any configuration changes up to the WCS after an APPLY and "Save Configuration" are clicked.
4) In terms of getting the WCS to actually synch up with the controller (assuming the WCS and WLC are at the same rev. levels), you may need to do what I did (this was subsequent to upgrading to v4.2 in both the WLC and WCS and having chronic "mismatch" status between the WCS and WLC):
From the WCS:
Configure->Controllers, check the controllers you wish to synch up. From the dropdown, select "refresh config from controller"
Next, select the DELETE option (instead of the RETAIN option). I believe that there are bugs in the software that upgrades earlier revisions to 4.2. I know that it might seem undesirable to DELETE information in the WCS, however, if you choose "DELETE", it seems to get rid of the residual information from the previous revisions that did not upgrade properly and the WCS will now be in synch with the controllers. DELETING the other settings makes the audit errors go away.
Subsequent audits may go better for you after performing the step shown above. However, you may need to repeat this process in item 4 above once or twice more until the database gets cleaned up, but after that my own experience has been that the WCS and WLC will eventually stay in synch.
It is unfortunate that we are forced to come up with workarounds like these when the software should clearly be able to handle this on its own, but we do what we must to get the job done.
Hope this helps,
- John
(Please rate helpful posts)

App store, installed (and regs) iWorks does not show as installed in the app store

Hi all,
Had installed iworks 09 as test product and bought the key, but on the app store still shows option to buy instead of installed as the rest of my soft does, any idea?
Obviously its not urgent or important, but would like to know why.
Many thanks to all & best regards.

Already answered in the topics, just not surfed enough to find at first. Thanks to all.

Secure Store Database and ActionType Entry Value Not Documented?

Similar Messages

Maybe you are looking for