Secure Store Service Application takes a lot of time and does not create the database

Hi everybody,
I was trying to configure sharepoint performance point and I was following the instruction. After I created the performance point services application I tried to creat the secure store service application. When I do this, the progress window stays open forever
even after 2 hours. If I close the window, I will see that the secure store service and proxy app is created and the application pool also is created in IIS but the database is not and the application service is stopped. even when I want to delete it, it's
the same story and the progress window stays until I close it manually. Nothing has been logged in the event viewer because it doesn't throw any exceptions.
I don't think that I have permission issues on the database server side because I have created the performance point service app and the database is there. I have used the same credentials to crete the secure store.
I have restarted the secure store service and IIS for many times and even the server itself.
I'm wondering if anybody has had this issue because I couldn't find anything on the web.
Thanks,
Edwin

Alex, please ignore my previous answer. I found more information in the ULS. At the time that I started creating the service application by power shell these things are logged and they are repeated several times:
it starts with:
11/13/2013 15:19:55.52 PowerShell.exe (0x1698)
0x170C
Secure Store Service
Secure Store
esj6 High
Creating Secure Store Service Application 'Secure Store Service Application'.
c402af0c-5ff6-4995-83b8-3f95210a8b3d
11/13/2013 15:19:55.54 PowerShell.exe (0x1698)
0x170C
Secure Store Service
Secure Store
esj9 Medium
Creating "database object" 'SP_SecureStore' for application. At this time database is not created.
c402af0c-5ff6-4995-83b8-3f95210a8b3d
11/13/2013 15:19:55.54 PowerShell.exe (0x1698)
0x170C
Secure Store Service
Secure Store
esk0 Medium
Saving "database object" 'SP_SecureStore' in the config db.
c402af0c-5ff6-4995-83b8-3f95210a8b3d
11/13/2013 15:19:55.83 w3wp.exe (0x0944)
0x0DB4
Secure Store Service
Secure Store
d4gx Verbose
BackgroundTasks instance accesed.
11/13/2013 15:19:55.83 SPUCWorkerProcessProxy.exe (0x13A0)
0x02B0
Secure Store Service
Secure Store
d4gx Verbose
BackgroundTasks instance accesed.
11/13/2013 15:19:55.83 PowerShell.exe (0x1698)
0x1740
Secure Store Service
Secure Store
f7wk Verbose
StartTracker called for secure store ''
11/13/2013 15:19:55.83 PowerShell.exe (0x1698)
0x1740
Secure Store Service
Secure Store
f7wl Verbose
Tracker not started because call not made from Service Host.
11/13/2013 15:19:55.83 WebAnalyticsService.exe (0x0A6C)
0x1B88 Secure Store Service
Secure Store
f7wk Verbose
StartTracker called for secure store ''
Finally it says:
11/13/2013 15:19:55.90 PowerShell.exe (0x1698)
0x170C
Secure Store Service
Secure Store
esk9 High
Secure Store Service Application 'Secure Store Service Application' created.
c402af0c-5ff6-4995-83b8-3f95210a8b3d

Similar Messages

Time machine takes very long time and does not finish the backup

Hi,
Time machine is unable to backup my 2014 Mackbook Air 128 GB Drive anymore.
I have tried numerously to initiate a backup but it could only backup a very small volume, less than 1KB, then stall for hours without any progress.
I tries to repair my volume, using the Disk Utility, but it still does not backup, except for the 1K progress.
I have noticed that "Spot Light" indexing is also taking forever. It has been indexing for days without any pogress.
What is going on.
What should I do to fix it.
My latest successful backup was on Jul 25.
Please help.
Thanks.
Tareq

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the word "Starting" (without the quotes.) You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard."
Each message in the log begins with the date and time when it was entered. Note the timestamp of the last "Starting" message that corresponds to the beginning of an an abnormal backup. Now
CLEAR THE WORD "Starting" FROM THE TEXT FIELD
so that all messages are showing, and scroll back in the log to the time you noted. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ If all you see are messages that contain the word "Starting," you didn't clear the text field.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. Don't post more than is requested.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

The Secure Store Service application Secure Store Service Proxy is not accessible

I am working on setting up a new SharePoint 2013 Farm for our external web site which is currently running on 2010 SharePoint. Because this is an External Website for our organization we have an internally available Publishing Site and there is an Web App
Extension to provide Anon Access to users using the www address. Currently I am doing everything on a single server for testing with HOSTS entries to loop back so I can test with real host headers and not impact the 2010 prod environment. We will be setting
up 2 more WFEs with a NLB before moving this into prod but it isn't there yet. We brought the Site Collection Databases over but are still running in 2010 mode for now.
I migrated a copy of the Secure Store Database over from 2010 and had it put on the 2013 Farm's Database Server. Set up Secure Store and the Secure Store Proxy. I went into the Secure Store Proxy in CA and refreshed the Key with the proper Pass Phrase. After
doing that I could see the Target Application IDs listed. Everything was looking good so I went off to test. If I am on the publishing site I can go to a page that has the solution on it and it operates as expected. It does a query to a non SharePoint database
and returns information filtered based on the search parameters. The only odd thing I see is if I click on the "Site Actions" I get a message "An error has occurred with the data fetch. Please refresh page and retry." Need to look into
that more but it only happens on pages that have these solutions. Maybe a clue. If I go to the Anonymous Access page (www......) and try and use the solution, it immediately (way too quick to appear like it is doing anything) comes back with "The security
token request cannot be completed."
If I dig through the usage logs I am finding the following.
The Secure Store Service application Secure Store Service Proxy is not accessible. The full exception text is: The security token request cannot be completed.
Unexpected exception from endpoint address : https://[Servername]:32844/4e87fd3aabb640fb8cc3ed52188cf5c0/SecureStoreService.svc/https
Logging unknown/unexpected client side exception: InvalidOperationException. This will cause this application server to be removed from the load balancer queue. Exception: System.InvalidOperationException: The security token request cannot be completed.
at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForServiceContext(Uri contextUri) at Microsoft.SharePoint.SPChannelFactoryOperations.InternalCreateChannelActingAsLoggedOnUser[TChannel](ChannelFactory`1 factory, EndpointAddress
address, Uri via) at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.GetChannel(Uri address) at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.Execute[T](String operationName,
Boolean validateCanary, ExecuteDelegate`1 operation).
Initially I was fighting a firewall issue because it wasn't working (different errors) on both sides. Had Network Engineers open firewall ports needed and now it works on the publishing side. Still the same error on the Anon side. I suspect I have missed
something when it comes to configuring the Secure Store to allow access to anonymous connections.
Let me know if you need any more information but that should paint a pretty good picture as to how things are set up.
Thanks for any help on this one. Searches haven't found much that has helped so far.

Hi Sennister,
I recommend to verify the things below:
Did this issue occur with all the pages in the anonymous side?
Check if the Claims to Windows Token Service is started.
Change the <identity impersonate="true" /> in the web.config to see if the issue still occurs.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Application Compatibility does not update the database.

Hi,
I am using application compatibility manager 6.1, and SQL server 2012 as database. ACT run ok and it create the XML file but it does not update the database at "C:\Program Files\Microsoft SQL Server\MSSQL11.SQLEXPRESS\MSSQL\DATA" location.
I can see the valid XML file but somehow the MDF file of database is not updated so my ACT windows does not showing anything on it.
Any Help would be appreciated.
Thanks
Rakesh Patel
rakesh patel

Hi Rakesh,
I am not sure if you have resloved your issue.
But for helping others to know what to do if they meet the same issue as yours, I consider to mark the post as answered.
If you would like further assistance, please post back and we will be always here to help you.
Any concern about this mark behavior, you can just unmark it.
Thanks for your understanding.
Regards,
Kelvin hsu
TechNet Community Support

HT5312 I forgot my security questions answer and does not have the rescue Email.

I forgot my security questions answer and does not have the rescue Email.

If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down the page that you posted from to add a rescue email address for potential future use

Getting this:You cannot install Security Update 2011-002 on this volume. This volume does not meet the requirements for this update?

I am getting this message: You cannot install Security Update 2011-002 on this volume. This volume does not meet the requirements for this update?
is there a way to install this update?

Hello
More information would be useful, for example which Mac OS are you running.
On the left menu item  About this Mac provides useful information.
Also did you use Software Update to determine the update?
Using Software Update can ensure you download and install the correct package for your particular Mac and OS version.

I would like to run the most secure version of firefox on my computer, but my computer does not meet the system requirements for the latest version

i would like to run the most secure version of firefox on my computer, but my computer does not meet the system requirements for the latest version. is there a way i can have the security of firefox 8 and still be able to run it on my old computer. i currently an running firefox 3.6. it is a bit slow, but it is functional.

Currently Firefox 3.6.24 is as secure as Firefox 8.0.1 is. Firefox 3.6.x will continue to get security updates until next spring, although the exact date hasn't yet been determined.
Which of the system requirements are you lacking? <br />
Processor wise you're stuck with what you got, but RAM can be upgraded. WinXP is still supported in all versions of Firefox and will be continued to be supported until Windows drops support for WinXP sometime in 2014.

My macbook pro 2.33 17 inch takes 9 minutes to start and does not start with lion

my macbook pro 2.33 17 inch takes 9 minutes to start on Snow Leopard and does not go beyond the apple log start up with lion.
When I am using Snow Leopard after it has finished the starting process; everything works well..it is just the 9.10 minutes it takes to
boot that I don't understand + I want to upgrade to lion, but it get stock in the apple logo and the little while just keeps on spinning eternally.
I feel I am in purgatory...:-)
Please help ...any suggestion will be appreciated;
Thanks.

See if this is of any assistance:
http://support.apple.com/kb/TS2570
Ciao.

Creating Secure Store Service Application Error

Hi Experts,
Weird thing's happening in our SP. Everytime we create/delete service application, we always end up with this:
It says that it shouldn't take long but it takes forever on our side.. Do you have any idea about this?
Thanks!
Regards, Glenn

Hi Glenn,
Yes, this is the point. SharePoint Server 2013 requires 8GB RAM at least.
You can have a look at the blog:http://communities.quest.com/community/sharepointforall/experts-blogs/blog/2012/08/31/sharepoint-2013-hardware-requirements--a-consideration-qsharepoint-sp2013
Best Regards,
Eric
Eric Tao
TechNet Community Support

ORCL Service start takes a lot of time in German OS and German DB!!

HI Gurus!!
I have a problem here.
I am running Oracle 8.1.6 on Windows NT 4.0 Enterprise edition.
It is a German O.S. and German Oracle database.
When I try to start OracleServiceORCL through net start in DOS
window or through services, it takes more than 5 minutes to
start the service.
I have no idea why it is doing that. When I open another DOS
window and try to start Oracle through server manager, it
improves the start time for service.
Any thoughts on this please.
Kind Regards
SP

You have two possibilties:
1. change the "user" starting the oracle service to the local
administrator (settings -> services -> Oracle... -> ...)
2. change the registry key AUTOSTART... to false, but then you
have also start the database on your own with sqlplus/svrmgrl.
Thomas

My ipod touch is using location services of china and does not show the place where i am living in india.

when i use location services through wi-fi my ipod doesnt show my exact location and uses china as default location , so i am encountering problems while yousing apps like watsapp or wechat etc. plz give me a solution

For location the iPod uses the location of nearby wifi routers that are in Apple's database. You do not have to be connected to the network/router to use that router's location. Thus, it appears that the iPod can't see a nearby router that is in Apple's database. or finds one that has it location as China. Apple continuously updated their database based on info they obtain from iPhones. However, I do not know if that applies to India. No one has been able to find a way to inform Apple of a router or correct is location.

HT4859 Child locked my iphone and does not remember the code. Will icloud backup store the pics, etc, or are they lost?

Hi. Little child locked my iphone and forgot the passcode!
Will iCloud back up pics still? i guess I have to reset? Solutions? she cannot remember the code.
Thank you!

Hey met,
You will have to restore the phone to get back in. Restore it from a backup.
iCloud still has your stuff, and I believe that backups continue as before.
Moral: Don't tell your child your passcode!

Installing patch 5217019 takes long time and does not end

Hi,
I try to install patch 5217109 to my TEST instance.While installing patch the 8 workers are selected default.7 of workers are in statu of completed but 1 worker is waiting for long times and does not end.
What can be my problem?

Start time for file is: Mon Aug 10 2009 11:45:01
sqlplus -s APPS/***** @/oracle/TEST/testappl/ad/11.5.0/admin/sql/adpcpcmp.pls APPLSYS &pw_fnd APPS &pw_apps &systempwd 8 1 NONE FALSE
Arguments are:
AOL_schema = APPLSYS, AOL_password = *****,
Schema_to_compile = APPS, Schema_to_compile_pw = *****,
SYSTEM_password = *****, Total_workers = 8, Logical_worker_num = 1
Object_type_to_not_compile = NONE
Use_stored_dependencies = FALSE
Connected.
Checking for previously-invalid objects which are now valid...
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.03
Commit complete.
Elapsed: 00:00:00.00
Deleting any errors from previous run of this logical worker
0 rows deleted.
Elapsed: 00:00:00.00
Commit complete.
Elapsed: 00:00:00.00
Compiling invalid objects...

SAML authentication Secure store service target ID Project server integration with excel service

I installed and configured share Point 2013 Project server 2013, and Created web application Trusted Identity Provider (SAML 2.0) ,it is working as we expected means
..end user are able to access application(User Login through email and alies(account NAME) )
My problem here CA is working NTLM authentication ,Web application is working SAML
while creating service application(LIKE SSSA Excel Performance ... ( it automatically take NTLM) I CREATED TARGET ID in secure store service application ,I chooser "GROUPS" under SSSA,and
we added members "group to account and email id.
I configure Excel service application and i SSSA Target ID in this excel service application also added trusted location for PWA site
while opening excel sheet under Project server (An error occurred while accessing application id ProjectServerApplication from Secure
Store Service. The following connections failed to refresh)
I tried target ID choose option " Group Ticket"
Is it CA required for SAML authentication? .. (extend web application
How Service application like SSSA will work for SAML authentication?

Hi SridharMandipudi,
as i know, usually when the error appear, you need to check the member.
The domain group that was specified the Secure Store Service ID ProjectServerApplication did not have any members in the group.
and please also have a try in a testing secure store service application:
Created new secure store service application with new target application ID. and added this ID in excel service application -----global settings----Application ID.
went to Central admin---manage web application---selected web application ---click on Service Connection---associated newly created secure store service application.
edited data connection string of excel file.
went to site and tried refresh that excel file and able to refresh the file.
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Create a new target application - Secure Store Service administration issues

Hi,
I am trying to create new target application, when I go to Secure Store Service in Centra admin I have:
Cannot complete this action as the Secure Store Shared Service is not responding. Please contact your administrator.
I have used this few days ago and avarything else is working fine on the server, and I have applications created with it running fine.
Any help is appreciated.
cheers
Valko

I know this has been open and possibly answered for a while but I thought I would mention what I ran into since I haven't found it posted anywhere.
It was confusing because once I clicked the Ssecure Store Service I recieved the message that is mentioned here in this thread. With that, you can't make any changes. After trying numerous things I simply highlighted the Secure Store Service (the Applicaiont
not the Application Proxy) and selected Properties from the Operations section of the ribbon at the top of the page. This opened the properties page where I was able to change the Application Pool that the service was using.
In my case it was using the Sharepoint Web Services Default and changing it to the SecurityTokenServiceApplicationPool, which I had already configured to run on a named account with adequate priveleges (although it should run find on Local or Network
Service if they are configured correctly in IIS) corrected the issue.
Hope this helps someone...
Cheers

Secure Store Service Application takes a lot of time and does not create the database

Similar Messages

Maybe you are looking for