Secured system won't register as secured.

OK, I reset the password, went to the web based system and changed to a new password. It was successful, and when I access through the hard wired computer it asks for the password. Unfortunately, the wireless access now shows that the system is unsecured and it is. What do I need to do to get the wireless part to reflect the required password? Thanks

You are mistaking your router password for your wireless passphrase.
Log on to your router, then click on Wireless.
Set wireless network mode to mixed.
Set your SSID to something other than Linksys. Ex.: Yankee.  Click on Save
Click on wireless security.
Set mode to WPA2 Personal and Algorithms to TKIP+AES.
Set your WPA Shared Key then save settings.  Copy on paper
Exit from your router.
Go to your wireless network and look for your network name Ex.: Yankee Secured network. Click on Connect.  It should ask you for the key.  Now input the WPA Shared Key.
You should now be connected.
Greetings from Northern Ontario, Canada

Similar Messages

  • Remote Access to my security system

    Hi
    I have recently installed a security system for my property with security cameras that are linked to my computer and I can see them by going to http:// and then my IP address. However if I type this url into a computer away from home then I get nothing. Can you help and tell me what to do to be able to see the camera images from a remote site away from my home via the internet?
    Mike

    *"Can you help and tell me what to do to be able to see the camera images from a remote site away from my home via the internet?"*
    Well no, because we don't know anything about how your network is setup, what hardware/software you're using for the security system and what the networking requirements from that system.
    Since your question really isn't related to a compatibility issue between Mac OS and Windows, which is the focus of this forum, you should probably post your question in the OS X networking discussions, after you get the networking requirements from manufacturer of the security system.
    http://discussions.apple.com/forum.jspa?forumID=733

  • Register Rejected: security error

    Hi
    i have a CCM 9 with autoregister enabled, trying to register a CIPC said "register rejected: security error"
    I have other CIPC and runs fine, but in one is failing, even with a manual registering said the same message.
    any idea where can be the problem? In CCM is in rejected state.
    Thanks.                

    I was having the same error.
    CUCM, CAPF and CTL service was running which i turned off. After deleting the Phones when i tried to re-register the phones they started to give me this error. "Registeration Rejected : Security Error" . I also switched the tftp from Publisher to a subscriber server.
    Solution : I manually added each phone to the system since they were few phones. You can Use BAT to add the phones if you too many phone having the same problem.
    Hope that helps
    If any one figure out why it happened please share it here.
    Thanks
    Regards
    Mazin Muhammad

  • ISight as a security system?

    I am coming here because I can’t think of a better place to start. I have a need to place a video camera to find out who is damaging a gate in our driveway. My problem is there is very little room to place equipment. Some people I have talked to I build up a specialized PC with one of those small mother boards, but I do not want to go into the manufacturing business : ) I would like to buy a mac mini and iSight and use it as a security system, however I have seen no indication that the iSight software is capable of recording to the disk a record with less than 30 fps. Also how much disk space would 24 hours of recording take up. Another requirement would be to have the software boot on power up, and record until it is powered down. Can anyone point me to some place I could get some more help?

    http://www.macdevcenter.com/pub/a/mac/2003/07/01/isight.html
    You can set the fps to 1 if you want and that would allow quite a lot of recording. Just turn it one and let it run all day. Set it to MPEG-4 and maybe limit to 750 kbits per sec initially.
    QT Broadcaster is free. And follow the directions the interface won't be too intimidating.

  • Amcrest security systems.  Iphone6 will not link using pnp. Iphone 4 and 5 both work. Whats the difference?

    i have an Amcrest security system. It has a live view feature using PNP. I have successfully connected with an Iphone 4&5 no problems.  NOT THE IPHONE6, THE LATEST AND GREATEST. What is the freaking difference?

    Have you ever tried to get an answer from them? Why would I need to contact them, their stuff works as it should with the Iphone 4 & 5.  Apple changed something.  I will email them tomorrow and see what they say.  Hopefully they are not like apple and I won't have to make an appointment to see them three days from now in their one store in a city of 1 million people.

  • Outlook 2013 - Password change breaks S/MIME Certs "An error occurred in the underlying security system. Key not valid for us in specified state."

    AD password change comes up, user changes password.
    Tries to send signed or encrypted email with a Comodo S/MIME certificate, and gets the following error:
    ""An error occurred in the underlying security system.  Key not valid for us in specified state."
    I now have two reports of this error - one on Windows 7, and one on Windows 8.0 (remote user).
    The one on Windows 8.0, we tried removing their S/MIME cert from Outlook/Windows and re-adding, this did NOT resolve the issue.
    Plan was originally to have the 8.0 user ship their machine in, and wipe it, since nothing else could fix it and I wasn't finding anyone else with the same issue.  Now that I've got a second user with the same issue, its looking like a bug/issue and
    not a random glitch.
    Thanks in advance for any and all help with this!

    Hi,
    Thank you for your question.
    I am trying to involve someone familiar with this topic to further look at this issue.
    Thanks,
    Melon Chen
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

  • Setting up a security system via Airport Extreme...

    So I'm setting up an in-home security system called ingrid and everything is cool but the ingrid system does not detect the internet. I have everything set up as per the instructions for airport and ingrid... I'm a assuming it must be some kind of setting that just isn't allowing the phone that the system works off of to access the internet... I put in the phone's MAC address and gave it everyday all day timed access.. Still nothing... please help.

    Most Guest Network problems are a result of not using the correct type of modem with the AirPort Extreme.
    Apple is expecting you to use a simple modem.....not a modem/router or gateway type of device.....with the AirPort Extreme.
    So, let's first confirm on what type of device that you have to make sure that it will be compatible with the Guest Network feature.
    If you are not sure of your modem type, post back with the make and model number of the device that you call your "modem"......so we can check compatibility with that device.

  • How do I port forward or open a port on the Airport time capsule to hook p a security system?

    I have an airport time capsule and a security system.  The installer doesn't know anything about using routers etc, especially on a mac.  They say I have to port forward or open a port specifically of this device.  I have very few skills when doing this IT type.  Is this hard to do?  Can I do it myself?  He wants to get an IT guy out?  $55 an hour, how long would it take?  Thanks in advance for anyone who can help!

    The method is here.
    AirPort - Port Mapping Basics using AirPort Utility v6.x
    If you need to get someone in, it depends.. The TC can be recalcitrant.. due to your setup of it following the apple guides.. and it depends on the security system and how simple that is.
    There are multiple issues.. for example how do you find your IP address from the web when you have dynamic IP from your ISP.
    Do you intend to setup dynamic DNS? Can the camera /dvr system handle Dynamic DNS?
    I recommend you read very carefully the instructions for what has been installed.. because merely opening the port is only a small part of the issues involved in remote access to the security system.

  • How can I creat a security system for a truck, with Wifi camera playing on iPad/iPhone without 3G/LTE ?

    Hello,
    I want to create a wifi security system for a truck with cameras, but all the ones I found are IP. So I don't know if it's possible to use it only on wifi (not on 3G/LTE).
    If you have an idea, it will be nice...
    Thank you

    that range of most wifi setup unless you want to pay alot!
    would likely mean you could see about as much as the camera from where you were standing
    a mifi or otherwise something which bridge a lan to the internet would work
    make sure the camera have a webserver in it and then you can see it from any web browser where you put in the login and password

  • Tracking oracle database activities in security/system logs of windows server

    Can database activity like create or drop tables and packages be tracked in the security/system logs of windows 2003 server for the oracle database 10.2.0.4?
    Can purging of oracle log, n case the file has become big or even tempered be tracked in the security/system logs of windows 2003 server for the oracle database 10.2.0.4?
    dhomya

    Hi Dhomya,
    I am not familiar with Oracle database, though you may try to enable file system auditing:
    Audit object access
    https://technet.microsoft.com/en-us/library/cc776774(v=ws.10).aspx
    Apply or modify auditing policy settings for an object using Group Policy
    https://technet.microsoft.com/en-us/library/cc757864(v=ws.10).aspx
    Best Regards,
    Amy
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Can database activities of creating or dropping tables/packages be tracked in the security/system logs

    Can database activity like create or drop tables and packages be tracked in the security/system logs of windows 2003 server for the oracle database 10.2.0.4?
    Can purging of oracle log, n case the file has become big or even tempered be tracked in the security/system logs of windows 2003 server for the oracle database 10.2.0.4?

    2765539 wrote:
    Can database activity like create or drop tables and packages be tracked in the security/system logs of windows 2003 server for the oracle database 10.2.0.4?
    Can purging of oracle log, n case the file has become big or even tempered be tracked in the security/system logs of windows 2003 server for the oracle database 10.2.0.4?
    Your first question is easy, you configure audit to log to the OS audit trail with
    alter system set audit_trail=os scope=spfile;
    and then enable audit for whatever actions you want to capture. All documented in the Security Guide.
    Your second question makes no sense unless you explain what you mean by "oracle log".

  • Cannot open port through Airport Extreme to access security system DVR

    I have internet access through Bellsouth DSL -- modem only. We had a security system set up around a DVR recording images and connected to the internet through a Linksys router. We would use a client on outside computers to connect to the security system dvr and see what was happening (live or recorded). I switched out the Linksys for the Airport Extreme, and now we cannot connect to the DVR.
    Do I need to manually open a port to the DVR? How do I do this? The DVR connects to the Airport Extreme via Ethernet, and as far as I can tell, the Airport Extreme connects to the DSL modem via Ethernet using DHCP. We have a static IP address. I thank you in advance for any answers, and I apologize if I'm not giving enough information.

    Let's double-check your Port Mapping setup on the 802.11n AirPort Extreme Base Station (AEBSn) ...
    To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
    1. Reserve a DHCP-provided IP address for the host device.
    Internet > DHCP tab
    o On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
    o Description: <enter the desired description of the host device>
    o Reserve address by: MAC Address
    o Click Continue.
    o MAC Address: <enter the MAC (what Apple calls Ethernet ID if you are using wired or AirPort ID if wireless) hardware address of the host computer>
    o IPv4 Address: 10.0.1.4
    o Click Done.
    2. Setup Port Mapping on the AEBSn.
    Advanced > Port Mapping tab
    o Click the "+" (Add) button
    o Service: <choose the appropriate service from the Service pop-up menu>
    o Public UDP Port(s): 6746
    o Public TCP Port(s): 6746
    o Private IP Address: 10.0.1.4
    o Private UDP Port(s): 6746
    o Private TCP Port(s): 6746
    o Click "Continue"

  • My windows 7 security settings won't let me download mozilla firefox. How do I change my security settings to allow the download?

    I'm setting up my new laptop. MS internet explorer won't let me install Firefox. says my security setting won't allow the download . . .

    Go to Start>Control Panel>Internet Options>Privacy (tab) There should be a bar & it might work if you make it lower. You could go to the advanced tab too & uncheck some of the security blocking things

  • I want to install onyx but my security preferences won't let me download it. Is it safe to change them and download from an unidentified developer? Will they be able to access my information?

    I want to install onyx but my security preferences won't let me download it. Is it safe to change them and download from an unidentified developer? Will they be able to access my information?

    1. If you just want to run one application, control-click it and choose Open instead of changing the setting. This only needs to be done once per application.
    2. Ensure that you trust any software you choose to open in this way.
    (108081)

  • Can't update iOS 8 on my iPhone5 through iTunes on Windows 8 (error 3004, 3194). Updated host file, opened port 80, 443; turned off security system and firewall, etc. But nothing works. How to solve this problem?

    Can't update iOS 8 on my iPhone5 through iTunes on Windows 8 (error 3004, 3194). Updated host file, opened port 80, 443; turned off security system and firewall, etc. But nothing works. How to solve this problem?

    Hi the_mad_movies,
    It seems like this article will be the best option for addressing this issue:
    Error 3194, Error 17, or "This device isn't eligible for the requested build"
    http://support.apple.com/kb/ts4451
    Thanks for coming to the Apple Support Communities!
    Cheers,
    Braden

Maybe you are looking for