Securely Access Exchange Server 2007 through ASA 5510 using Outlook

Is there any way to access a MS Exchange Server 2007 on Windows server 2008 through an ASA 5510 running 8.4 with a full MS Outlook client (not using OWA - web browser)?  OWA is currently working fine but I was wondering if access via the full Outlook client is possible and more importantly...is it opening up too many ports on my 5510?  Any help is much appreciated!
~John

Hi John,
For that scenario, a remote access VPN is probably the best way to go (either the traditional IPSec client or SSL VPN/AnyConnect). This config guide lists your options on the ASA:
http://www.cisco.com/en/US/docs/security/asa/asa84/configuration/guide/vpn_ike.html
-Mike

Similar Messages

  • MS Forefront Server Security for Exchange Server 2007 SP1 - License Expired - Unable to update

    Hi
    1. My Windows SBS 2008 Server Console shows:
    Virus Protection for e-mail STATUS alert CRITICAL (Forefront Security for Exchange Server)
    Details: None of the engines enabled for updates have been updated in the last week.
    Forefront Security for Exchange Server SP 1
    2. Event Viewer
    Error GetEngineFiles
    Event ID 6012
    Generation: Microsoft Forefront Server Security encountered an error while performing a scan engine update.
    Scan Engine: vBuster (same for microsoft, Kespersky5, Wormlist, etc.)
    Error Code: 0x80004005
    Description: The product license has expired.
    Error Microsoft Forefront Security
    Event ID 7007
    General: None of the engines enabled for updates have been updated in the last week.
    3. About forefront
    Opened Forefront Server Security Administrator > Help > About Forefront
    Forefront Server:
    Version: 10.1.0746
    Service Pack: 1
    Product Id:
    Licensed Components:
    Component: Forefront, License Type: Evaluation, Expiration Date: 16 Dec 2013
    DO I HAVE TO BUY THIS PRODUCT or DO I HAVE TO INSTALL Forefront Security for Exchange Server SP2 or SP3?
    Can please someone advise in this regard,
    Thanks

    -->Component: Forefront, License Type: Evaluation, Expiration Date: 16 Dec 2013
    Evaluation version? didn't activate this product? You
    can convert an evaluation license to a subscription license by activating the product. Be sure to have the product key available when activating FPE. After the product is activated, you can also align when the product expires with your license agreement, and
    easily renew your license by entering a new expiration date.
    Best,
    Howtodo

  • Exchange Server 2007 Cross Mailbox Search using Export-mailbox

    Hi All.
    We are trying to do some legal discovery but we are having a few problems. 
    Exchange 2007 (SBS 2008)
    The command for a single user mailbox works and returns the results i would expect:
    Export-Mailbox -Identity "User" -SenderKeywords "[email protected]" -TargetMailbox administrator -TargetFolder "Attempt2"
    but the same command to run over the entire mailbox database is giving me wildly inaccurate results, including emails from senders with nothing to do with the "[email protected]" address
    get-mailbox –Database "Mailbox Database" | Export-Mailbox -SenderKeywords "[email protected]" -TargetMailbox administrator -TargetFolder "Attempt2"
    Not only that, but i also want to find out how NOT to include empty folders in the export.  Because the "Administrator\Attempt 2" folder doesn't just include the exported messages, but actually includes the full subtree of folders, with lots
    of empty folders?  
    Any help on the above would really be appreciated.
    Thanks.
    Ben Weinberg
    Prime-Networks
    www.prime-networks.co.uk
    Please post the resolution to your issue so that everyone can benefit
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

    Hi ,
    Thank you for posting your issue in the forum.
    I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
    Thank you for your understanding and support.
    Best Regards,
    Andy Qi
    TechNet Subscriber Support
    If you are
    TechNet Subscription user and have any feedback on our support quality, please send your feedback
    here.
    Andy Qi
    TechNet Community Support

  • Manual Updates for Forefront Security for Exchange server

    Hello Team
    I have installed forefront security for exchange server 2007 in  CCR  and but there is no internet connectivity as it is in my test lab, 
    I would like to enable the below scan engine and update the scan engine in weekly basis as i cannot do it on daily, (No Internet Connection)
    MS Antimalware engine
    Kaspersky
    and Norman 
    Where can i get / download  the scan engine updates  for the above each  scan engines...and how to installed them manually  without internet connection . Could someone please help

    Hi Quan, and Christian,
    Thanks for that.
    My Query is that,, where can i download the updates , i mean which website can i can download the udpate for the scan engines,
    Since it my testlab environment., i don't have internet connection
    i need to download the updates from external (out of my test lab) and transper those udpates via pendire / hard drive to the test lab and from there i need to update.
    first of all , i would like know which website any source can provide  the updates for these separate scan engine updates.
    Hope you all understand

  • Spam Protection for Email showing Critical for Exchange Server 2007 after installing Symantec Mail Security for Microsoft Exchange

    Hi there,
    I have SBS 2008, and I have recently installed Symantec Mail Security for Microsoft Exchange  version 7.5 but when I take a look on Windows SBS Console under Security, it shows "Spam Protection for Email Critical Exchange Server 2007" However,
    when I open the SMSME it shows running well with no problem..
    Any Suggestions???
    Thanks

    Hi,
    Would you please let me confirm whether all functions (which are related to Exchange Server) run as normal? Just
    a confirmation, thanks for your understanding.
    Please run
    SBS BPA and check if find relevant issues. In addition, please refer to GaryD9’s suggestion in following thread and check if can help you.
    SBS
    2008 & Forefront Protection 2010 for Exchange - SBS Console Error
    If any update, please feel free to let me know.
    Hope this helps.
    Best regards,
    Justin Gu
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Will CF9 cfexchangecalendar access public calendars in Exchange Server 2007?

    We need to create something in CF9 that will allow us to access public calendars in Exchange Server 2007. I've Googled it but only come up with dead ends. Any help would be appreciated.

    I ran into the same situation recently, and found out that you need to make sure InternalClientsRequireSSL is set to false.
    To verify: Run Get-OutlookAnywhere | fl Identity, *ssl
    If it is true, try setting it to false.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread

  • Journaling - Exchange Server 2007 Outlook POP Email Account

    Hi there,
    My current setup:
    In Outlook
    Account 1: Exchange Server Email Account
    Account 2: Other Email accounts using POP setting (Only when outlook is open send/receive emails and used only via outlook)
    Email Store -Incoming
    Account 1: OST Cache -Inbox Folder
    Account 2 :Same as account 1 (Emails are replicated on Exchange Server) so they are available through OWA.
    Email Store - Outgoing
    Account 1: OST Cache –Sent Folder
    Account 2 :Same as account 1 (Emails are replicated on Exchange Server) so they are available through OWA
    All emails are stored on Exchange Mailbox.
    Now I will need to activate Journaling on Exchange Server 2007.
    Will all email be collected in journal (Exchange+POP)?
    If not how can this be done?
    I will need an automatic way of doing it (maybe using Outlook rules - received/send via a specific account).
    This is required as I am planning to implement
    GFI Mail Archiver.
    Thanks,
    Rajiv

    Exchange journaling only journals Exchange messages - it is not an Outlook-dependent system, nor does it journal everything that Outlook can access.  It is server-side only - messages sent through the Exchange system will be journaled because they hit
    the Exchange server; messages sent through POP accounts will not, since they never see the Exchange server.
    So, messages you receive in the POP mailbox will not be journaled, but since all messages you send go out through Exchange, they will all be journaled.
    Oh, and one more thing you need to know:  all messages that are already in your mailbox will not be journaled - Exchange journals what is delivered through the transport system, not what is in the mailboxes already.

  • Is there a way to sync Pre-MS Exchange Server 2007 (Service Pack 1) Calendar?

    Hello all,
    I think my company must be using Pre-Microsoft Exchange Server 2007 with Service Pack 1 for our exchange server, because
    I can only set up company Exchange account on MS Entourage, not the new Outlook
    I can only set up the same exchange account only on iPad and iPhone (able to view in Mail, Calendar, Contacts & Reminders)
    But
    I am unable to use Lion's Mail, iCal and Address Book to see my Exchange account
    For the moment, I am not really concern about mail and addresses,
    but can I see my Exchange calendar on my desktop iCal? How do I set it up?
    I guess the most obvious and straight forward way, for now, is to view on my iPad :-)  But it is really funny that the iDevices are backward compatible but yet Lion OS cannot...
    Thanks and cheers.

    Hi,
    Yes it will work, it says enterprise because it works there as well.
    Thanks
    Bifocals
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • MimeMessage.reply() issue with MS Exchange Server 2007 Emails

    I have an application that retrieves emails from an MS Exchange Server 2003 mailbox. The data from each message is read, validated and conditionally loaded to a table. If the message doesn't pass validation, a rejection email is sent back to the sender with an error message and a copy of the email. (We're using Java 1.5. However, I test with both 1.5 and 1.6.)
    Also, if the message passes validation, positive notification is sent back to the sender.
    Both processes use the method: javax.mail.Message.reply()It's coded as:
    MimeMessage reply = (MimeMessage) message.reply(false);My organization is in the process of migrating to MS Exchange Server 2007. We've found that the reply() method no longer finds the sender method, thus unable to create a reply message. The error message we receive is:
    javax.mail.SendFailedException: No recipient addresses
         at javax.mail.Transport.send0(Transport.java:110)
         at javax.mail.Transport.send(Transport.java:80)
         at org.ccci.gms.datacollector.DataCollector.sendReply(DataCollector.java:514)
         at org.ccci.gms.datacollector.DataCollector.processMessages(DataCollector.java:162)
         at org.ccci.gms.datacollector.DataCollector.main(DataCollector.java:101)After creating the MimeMessage object from the reply() method, I printed out the email header detail from both 2003 and 2007 messages. You'll note from below that the "To" or recipient address is missing from Server 2007.
    MS Exchange 2003 works fine
    From: [email protected]
    To: [email protected]
    Subject: Re: Report
    In-Reply-To: <[email protected]>MS Exchange 2007 no longer works
    From: [email protected]
    Subject: Re: Reports
    In-Reply-To: <[email protected]>I know I could just use the "addRecipient()" method to get around this problem. I wanted to know if anyone has encountered this issue. Please share the resolution. Any suggestions will be greatly appreciated.
    Thanks,
    LaelW

    When the original message is accessed using IMAP, the reply method uses the information in the
    IMAP ENVELOPE to determine where to send the reply. It first looks for the Reply-To address
    in the ENVELOPE, then the From address.
    Interestingly, when not using IMAP, the getFrom method returns the Sender header if the From
    header is empty. The IMAP-specific code doesn't do that, although perhaps it should.
    It would be interesting to compare the ENVELOPE data from the protocol trace in the two cases.
    The ENVELOPE data will follow this syntax:
    envelope     = "(" env-date SP env-subject SP env-from SP
              env-sender SP env-reply-to SP env-to SP env-cc SP
              env-bcc SP env-in-reply-to SP env-message-id ")"
    So it's the first three address fields after the Subject that are relevant. If the From and Reply-To
    fields are NIL, but the Sender field has a valid address, let me know. I should probably fix the
    IMAP provider to fall back to the Sender field if the From field is missing.

  • M4E with N73 - MS Exchange server 2007

    Hi Guys,
    maybe I am stupid, but I can't seem to get this thing to work,
    I have installed mail for exchange 2.3, finally the security setting is showing, I have approved the certificate but still I am getting the very general :
    "Error in Exchange server. try again later."
    to explain my steps:
    1. configure the connection to use the HSDPA/Cellular link.
    2. hostname: owa.domain.com , username and password.
    server is Exchange server 2007 and configured behind an ISA server. OWA 2007 from a browser works fine.
    please any assistance would be great, I don't even know how to approach it anymore.
    thanks in advance,
    Badsyntax (Simon)

    Hi Imran,
    As per my information Webcenter Suite 10.1.3.2 does not have any direct integration capability with MS Exchange Server due to DEEP LINK LIMITATION. Only possible work around is go for External Application SSO registration and then render that URL in IFRAME.
    As far as WEBCENTER INTERACTION is concerned i think its seprately licensed and eventhough it's free you need extra Hardware to Install and Configure.
    Regards,
    Vindhyachal Sharma

  • Hidden Contact Subfolders are visible on iPhone after sync with Exchange Server 2007

    Hello,
    We have encountered an issue where synchronizing the iPhone with Contacts from an Exchange Server 2007 mailbox, causes hidden contact subfolders (from Outlook) to be visible and appear in the Groups list in the Contacts App on the iPhone.  This does not occur with Exchange Server 2010 mailboxes.
    We have a 3rd party application that creates hidden subfolders in the default Contacts folder on Exchange Server 2007 mailboxes.  The hidden folders do not display in the Outlook client, Blackberry or on an Android phone.  We did see that they were showing up in Outlook Web Access until we applied this Microsoft Exchange Server 2007 Service Pack 3 Rollup 2 patch unto the Exchange server:
    http://support.microsoft.com/kb/2210042 - A sub contact folder is still visible after you set the "PR_ATTR_HIDDEN" attribute to "True" in an Exchange Server 2007 environment.
    After the patch was applied, the hidden contacts do not show up anywhere else.  However, when we synced the mailbox to an iPhone and synced existing contacts, all of the hidden folders appear in the Contact Groups list.  Is there a way to hide the hidden sub contact folders on the iPhone and prevent them from appearing in the Contact Group lists?
    Any help provided would be most appreciated.
    Thanks and Best Regards

    Hi SBuchan,
    I have an open case with Microsoft about it.  It is an issue with ActiveSync in Exchange 2007 that sends the hidden objects.  Microsoft tried to resolve this in Exchange 2010 by sending a delete message after sending the hidden objects to remove them from the device.  Am awaiting to see if they will approve a design change to Exchange 2007 ActiveSync to prevent the synching of hidden objects.

  • Exchange Server 2007 Transport Agent Issue

    This is the first time i am working on Exchange Server Development. Below is a simple Transport Agent that i am using, this agent should simply update the email Subjects
    as shown below in the code.
    using System;
    using System.Collections.Generic;
    using System.Text;
    using Microsoft.Exchange.Data.Transport;
    using Microsoft.Exchange.Data.Transport.Smtp;
    namespace MyAgents
    public sealed class MyAgentFactory : SmtpReceiveAgentFactory
    public override SmtpReceiveAgent CreateAgent(SmtpServer server)
    return new MyAgent();
    public class MyAgent : SmtpReceiveAgent
    public MyAgent()
    this.OnEndOfData += new EndOfDataEventHandler(MyEndOfDataHandler);
    private void MyEndOfDataHandler(ReceiveMessageEventSource source, EndOfDataEventArgs e)
    e.MailItem.Message.Subject = "This message passed through my agent: " + e.MailItem.Message.Subject;
    Below is the Powershell script i am using to install the Agent.
    Net Stop MSExchangeTransport
    Install-TransportAgent -Name MyAgent -AssemblyPath EmailLogger.dll -TransportAgentFactory MyAgents.MyAgentFactory
    Enable-TransportAgent -Identity MyAgent
    Net Start MSExchangeTransport
    Agent installed successfully using Exchange Management Shell.
    Now when i send/receive emails in exchange, Email subjects are not modified. Emails have their original subjects. I don't know why?
    I also performed the steps mentioned in below links to debug the Agent but breakpoints are not being hit by Visual Studio Debugger.
    sf-tools.net/Messaging/tabid/55/EntryId/163/Exchange-2010-Transport-Agent.aspx
    stackoverflow.com/questions/12347123/debugging-ms-exchange-2007-transport-agent
    omarjames.com/blog/index.php/debugging-exchange-transport-agent/
    My System Configuration
    I am using the Exchange Server 2007 Virtual Machine provided by Microsoft from link below
    microsoft.com/en-pk/download/details.aspx?id=14901
    I also installed the Visual Studio 2008 on the VM for debugging.
    Please help me in resolving the issue?

    How are you testing this ? a SmtpReceiveAgent will only fire when the server receives email over SMTP. So if your just logging on and sending an Internal Email (eg mailbox to mailbox) or sending Email externally then the
    SmtpReceiveAgent wont fire. For a single server if you want to capture all email you need to use a router agent see
    http://blogs.technet.com/b/postwoman/archive/2010/09/14/step-by-step-how-to-create-a-routing-agent.aspx
    . If you want to test what you have try sending an email to mailbox over SMTP using an SMTP client or Telnet
    http://exchange.mvps.org/smtp_frames.htm
    Cheers
    Glen

  • Exchange server 2007 Service Pack problems SBS 2008

    I am Running Exchange server 2007 on Small Business server 2008 (SBS 2008). I tried to install SP2 but it fails both windows update and manually. Can anyone first advise me what version I'm currently running?
    Help / about form Exchange Management Console displays:
    Version 08.01.0436.000
    And running repair on Exchange server from programs and features displays 2007 SP1 setup. So I believe SP2 to be next I have also ran SP3 but this fails.
    Here is the end lines from a log:
    [03/05/2014 08:54:13] [0] Setup will run the task 'uninstall-msipackage'
    [03/05/2014 08:54:13] [1] Setup launched task 'uninstall-msipackage -logfile 'C:\ExchangeSetupLogs\ExchangeSetup.msilog' -ProductCode '24b2c164-de66-44fe-b468-a46d9d5e6b31' -PropertyValues 'BYPASS_CONFIGURED_CHECK=1 DEFAULTLANGUAGENAME=ENU''  
    [03/05/2014 08:54:13] [1] Beginning processing.
    [03/05/2014 08:54:13] [1] Property 'PackageName' is 'EXCHANGESERVER.msi'.
    [03/05/2014 08:54:13] [1] Removing MSI package with code '24b2c164-de66-44fe-b468-a46d9d5e6b31'.
    [03/05/2014 09:09:01] [1] [ERROR] Unexpected Error
    [03/05/2014 09:09:01] [1] [ERROR] Unable to remove product with code 24b2c164-de66-44fe-b468-a46d9d5e6b31. Fatal error during installation. Error code is 1603. Last error reported by the .msi package is 'Could not open key: UNKNOWN\Components\7ABFE44842C12B390AF18C3B9B1A1EE8\461C2B4266EDEF444B864AD6D9E5B613.  
    Verify that you have sufficient access to that key, or contact your support personnel. '.
    [03/05/2014 09:09:01] [1] [ERROR] Fatal error during installation
    [03/05/2014 09:09:01] [1] Ending processing.
    [07/05/2014 19:45:17] [0] End of Setup
    There is a registry key to match this and The administrator account used for setup has access to it i believe??? What does this log mean?

    Hi,
    This error indicated that your account missed registry permissions on: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Components\ 7ABFE44842C12B390AF18C3B9B1A1EE8\461C2B4266EDEF444B864AD6D9E5B613
    Please check whether you have permission. You can also check whether the key have permissions inherited from the Parent Key or not.
    After changing the permission, please run the setup again.
    Best Regards.

  • How to install and configure ms exchange server 2007 both role hub and edge transport role in one network

    How to install and configure ms exchange server 2007 both role hub and edge transport role in one network 

    Hi,
    Edge role is design for perimeter networks, to keep security risks minimum.  So it’s not recommended to have edge role in internal network. Must have separate network or subnet for edge services.
    If you are playing around it in labs, then you can put edge role within same subnet as other exchange roles and no specific requirements in that case.
    Thanks.
    MachPanel - Premium Cloud Automation Solution

  • Mail / Calendar with Exchange Server 2007

    Hi all,
    We have a problem with Apple Mail and Calendar (Mountain Lion) connected to an Exchange Server 2007.
    Apple Mail for no reason doesn't show the available data on the server. At first all goes right but after a few hours the data get corrupt. Folders disappear, mails aren't shown, ... The folders and mails are there in the server. I can check that with Outlook for Mac or on a collegues machine on Windows.
    I tried:
    - deleting the mail cache and mail data and restart
    - removing the accounts and setting them up again
    - creating a new user and trying mail in that user
    None of those solved my problem.
    Apple Calendar doesn't sync its data correctly. Example:
    I create an event in calendar A. From that event I onvite calendar B to join the event. So far, so good. Everything just syncs fine. Then for some reason I delete the event from calendar A. In the server the event is still there. I checked in Outlook. This error is reproducable.
    I tried:
    - naming the user to <WORKGROUP>\<user>
    - deleting the calendar cache and calendar data
    None of those solved my problem.
    Can anybody help me with this?

    Hi and Welcome to the Forums!
    The configuration I think you have is MS Exchange on the back end fronted (to the Internet) by Outlook Web Access (OWA). As such, Blackberry Internet Service is the interface between OWA and the BB...there is no direct interaction between the BB and the Exchange server. As such, only email will reconcile wirelessly in this configuration. Calendar, contacts, and other items must be reconciled via USB/BT tether.
    Now, that said, there is a free solution to do what you desire -- it's called BES Express. BES is BlackBerry Enterprise Solution and provides OTA sync of email, calendar, contacts, etc. Full BES is not free. But BES-X is. If you truly require full reconciliation of all things from Exchange, I recommend you research BES-X.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for