SecureSocket with client authentification (AIR) ?

Hi,
I'm trying to establish a secured TCP connection with a symmetric TLS authentication (two way authentication).
I can connect with success to the server with SecureSocket if the client authentification is disabled but I don't know where to set my public/private key (in p12 format) on the Adobe AIR client side to make the connection successfull with client authentification enable.
As mentionned on this page : Using TLS Client Authentication with AIR Applications
I tried on Android and Windows platform. I installed my client certificate to the respective trustsores on each platform.
If I issue an request from a browser to the server from those platforms, I'm succesfully connected and authenticated (of course my server doesn't "understand" HTTP as it's a TCP server using a propretary protocol, but at least the TLS mechanism works).
Is client authentication even supported for SecureSocket, I would be surprised if not as it seems to be such a basic thing ?
Regards,
Michel

Hi, Florian,
It seems that you have already got Ldaps worked. May I ask you a querstion? Which certificate did you use? I can't get my ldaps work when I use my own CA issued by openssl.
PLS share me with your experinces.
Thanks a lot in advanced.
Rong

Similar Messages

  • Problem with client authentification

    hi!
    I try to authenticate using SASL "External" and SSL.
    The SSL connection works fine, also SASL when using "Digest-MD5" but when I try to authenticate using "External" I get connected as anonymous.
    Here is what I did:
    I created a self-signed certificate with owner "uid=xyz,ou=OrgUnit1,ou=OrgUnit2,o=Org".
    My client has this certificate in it's keystore.
    The server has an entry with "dn=uid=xyz,ou=OrgUnit1,ou=OrgUnit2,o=Org" an this entry has the userCertificate attribute, which also contains my self-signed certificate.
    I edited the "certmap.conf" file like this:
    certmap default     default
    default:DNComps
    default:FilterComps     uid
    default:verifycert     on
    As I understood the manual, this means the server should search the directory for an RDN "uid=xyz" and check if the certificate of this user is the same as the one provided by the client. If it is, the client should get the permissions of this entry.
    But in the logfile I always get this message:
    conn=4 fd=1148 slot=1148 SSL connection from 172.16.0.190 to 172.16.0.190
    conn=4 SSL 128-bit RC4
    conn=4 op=0 BIND dn="" method=sasl version=3 mech=EXTERNAL
    conn=4 op=0 RESULT err=0 tag=97 nentries=0 etime=0 dn=""
    conn=4 op=1 SRCH base="uid=xyz,ou=OrgUnit1,ou=OrgUnit2,o=Org" scope=0 filter="(objectClass=*)" attrs="entryid"
    conn=4 op=1 RESULT err=0 tag=101 nentries=1 etime=0
    conn=4 op=2 fd=1148 closed - A1
    So, one possibility is I understood something completly wrong and the other is the server doesn't find the entry "uid=xyz,ou=OrgUnit1,ou=OrgUnit2,o=Org" because of any misconfiguration or I need a user certificate, which has been issued by a CA...
    Can anyone help me?
    Thanks a lot!
    Florian

    Hi, Florian,
    It seems that you have already got Ldaps worked. May I ask you a querstion? Which certificate did you use? I can't get my ldaps work when I use my own CA issued by openssl.
    PLS share me with your experinces.
    Thanks a lot in advanced.
    Rong

  • How to make call to Sender Soap Adapter using HTTPS with Client Aut

    Hello everyone, I have spent some time trying to get this to work. We downloaded a trail certificate from SAP and installed it on our machine and I created a webservice that works great. I tested the HTTPS without client authentification and it works great, as soon as I change it to use with Client Authentification I can't get it to go through. I am using Soap Sonar to test the certificates. To get the certificate I called the url with firefox then saved the certificate in my trust store, from there I import it to soap sonar as a signed certificate, but I am getting the error  <Exception>Object contains only the public half of a key pair. A private key must also be provided.</Exception>  I assume I am doing something way wrong, is there a way to get the certificate with both public and private key pair, or a way to test this that I can't seem to find in documentation or blogs?
    I def award points
    Cheers
    Devlin

    Hi
    I think This link is useful to u
    http://www.sapag.co.in/SAP-XI-SOAP-Adapter-FAQ'S.html
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40611dd6-e66e-2910-f383-e80fb44f9cd4
    Thanks
    Santosh

  • Cisco Flex 7500 controller with client disconnects

    Hey All,
    There will be alot of info in this post, hopefully all helpful, more info the better right!  If you require anymore info to help me out to not hesistate to request it.
    We have been having some issues with clients connecting and disconnecting several times a day and having to manually reconnect from the icon on their taskbar. We have about 380 APs, and 200+ more to deploy that we have and are licensed for but are having some issues that we want to resolve first obviously.
    Some locations our setup is a bit more complex than this with multiple SSIDs and vlans, but this issue is everywhere so i will keep it to our simple setup for now:
    AP Models: AIR-LAP1042N-A-K9, AIR-CAP1602I-A-K9 (Most locations do not have a mix of both, most have 1042s)
    Running a single SSID - WPA/WPA2 with: WPA - TKIP and WPA2 - AES on the same SSID. 
    They talk back to a Cisco Flex 7500 Series through a tunnel (should not be any port blocking preventing communication)
    We are running from what i understand a bad firmware version (7.6.100.0) and during our next maintenance window i am going to try and get them to change to a more stable firmware version.
    Data Rates of 1,2,5.5,11 Mbps are disabled
    TPCv1 coverage running
    Automatic Power Assignment
    I will not focus on the a/n/ac network as most of our devices are connecting to WPA due to the config they already have.
    Ideally i would like to get rid of WPA all together but i am not 100% in control of the decisions to get the started and people here like to delay things lol.
    It is hard to say if the issue is specific to a model as we have so few 1602Is, and it is just at our main office.  I have not heard many complaints but i have noticed i will now and then get a limited or no connectivity settings on my wireless icon on my PC.  I use hard-wired so i don't really notice if it is not working.
    In most locations it looks like the controller is doing a decent job at selection channels to use. I did find one spot where it had on 11 APs down a long hallway, and did not use channel 6 once. I statically set that location to stagger the channels to see what kind results we had and am still waiting to hear on that as they complained the most out of all of our locations. In some cases 3 APs in a row were on channel 1 in the hallway, in alot of casses 1 was 2 times in a row as well as 11 so there was alot of overlap.
    I am attaching my show sysinfo and show wlan 17 for that informtion, some of the other settings i have changed today that were previously enabled/set different are:
    Disabled Cisco Aironet IE
    Set channel automatic rescan from 10 mintues to 12 hours as i can image if it is changing the channels alot it can lead to disconnects.
    Some of the main things we get in our message log are:
    *dot1xMsgTask: Oct 16 15:17:36.943: #DOT1X-4-MAX_EAPOL_KEY_RETRANS: 1x_ptsm.c:508 Max EAPOL-key M5 retransmissions exceeded for client 84:85:06:0b:a6:33 
        - Not sure why we get this as we have a PSK and do not have local eap enabled.....
    *apfMsConnTask_6: Oct 16 15:19:01.753: #APF-3-AID_UPDATE_FAILED: apf_80211.c:6570 Error updating Association ID for REAP AP Clientc8:f9:f9:2b:fd:50 - AID 4
    *apfMsConnTask_6: Oct 16 15:19:01.753: #LWAPP-3-INVALID_AID2: spam_api.c:1462 Association identifier 4 for client 18:9e:fc:4d:9e:87 is already in use by 8c:2d:aa:b7:70:5e
        - There is a bug for this log, but according to the bug our 7.6.100.0 is not effected
    Here is my show sysinfo:
    (Cisco Controller) >show sysinfo
    Manufacturer's Name.............................. Cisco Systems Inc.
    Product Name..................................... Cisco Controller
    Product Version.................................. 7.6.100.0
    RTOS Version..................................... 7.6.100.0
    Bootloader Version............................... 7.6.101.2
    Emergency Image Version.......................... 7.6.101.2
    Build Type....................................... DATA + WPS
    System Name...................................... Cisco_cf:17:26
    System Location..................................
    System Contact...................................
    System ObjectID.................................. 1.3.6.1.4.1.9.1.1295
    Redundancy Mode.................................. Disabled
    IP Address....................................... 10.156.50.100
    System Up Time................................... 52 days 5 hrs 54 mins 25 secs
    System Timezone Location......................... (GMT -4:00) Altantic Time (Canada)
    System Stats Realtime Interval................... 5
    System Stats Normal Interval..................... 180
    Configured Country............................... CA  - Canada
    --More-- or (q)uit
    Operating Environment............................ Commercial (10 to 35 C)
    Internal Temp Alarm Limits....................... 10 to 38 C
    Internal Temperature............................. +22 C
    Fan Status....................................... OK
    RAID Volume Status............................... OK
    State of 802.11b Network......................... Enabled
    State of 802.11a Network......................... Enabled
    Number of WLANs.................................. 13
    Number of Active Clients......................... 1584
    Burned-in MAC Address............................ 70:81:05:CF:17:20
    Power Supply 1................................... Present, OK
    Power Supply 2................................... Present, OK
    Maximum number of APs supported.................. 600
    Here is my Show wlan 17
    WLAN Identifier.................................. 17
    Profile Name..................................... AirCCRSB
    Network Name (SSID).............................. AirCCRSB
    Status........................................... Enabled
    MAC Filtering.................................... Disabled
    Broadcast SSID................................... Enabled
    AAA Policy Override.............................. Disabled
    Network Admission Control
    Client Profiling Status
        Radius Profiling ............................ Disabled
         DHCP ....................................... Disabled
         HTTP ....................................... Disabled
        Local Profiling ............................. Disabled
         DHCP ....................................... Disabled
         HTTP ....................................... Disabled
      Radius-NAC State............................... Disabled
      SNMP-NAC State................................. Disabled
      Quarantine VLAN................................ 0
    Maximum number of Associated Clients............. 0
    Maximum number of Clients per AP Radio........... 200
    Number of Active Clients......................... 1768
    Exclusionlist Timeout............................ 60 seconds
    Session Timeout.................................. 28800 seconds
    User Idle Timeout................................ Disabled
    Sleep Client..................................... disable
    Sleep Client Timeout............................. 12 hours
    User Idle Threshold.............................. 0 Bytes
    NAS-identifier................................... Cisco_cf:17:26
    CHD per WLAN..................................... Enabled
    Webauth DHCP exclusion........................... Disabled
    Interface........................................ management
    Multicast Interface.............................. Not Configured
    WLAN IPv4 ACL.................................... unconfigured
    WLAN IPv6 ACL.................................... unconfigured
    WLAN Layer2 ACL.................................. unconfigured
    mDNS Status...................................... Disabled
    mDNS Profile Name................................ unconfigured
    DHCP Server...................................... Default
    DHCP Address Assignment Required................. Disabled
    Static IP client tunneling....................... Disabled
    Quality of Service............................... Silver
    Per-SSID Rate Limits............................. Upstream      Downstream
    Average Data Rate................................   0             0
    Average Realtime Data Rate.......................   0             0
    Burst Data Rate..................................   0             0
    Burst Realtime Data Rate.........................   0             0
    Per-Client Rate Limits........................... Upstream      Downstream
    Average Data Rate................................   0             0
    Average Realtime Data Rate.......................   0             0
    Burst Data Rate..................................   0             0
    Burst Realtime Data Rate.........................   0             0
    Scan Defer Priority.............................. 4,5,6
    Scan Defer Time.................................. 100 milliseconds
    WMM.............................................. Allowed
    WMM UAPSD Compliant Client Support............... Disabled
    Media Stream Multicast-direct.................... Disabled
    CCX - AironetIe Support.......................... Disabled
    CCX - Gratuitous ProbeResponse (GPR)............. Disabled
    CCX - Diagnostics Channel Capability............. Disabled
    Dot11-Phone Mode (7920).......................... Disabled
    Wired Protocol................................... None
    Passive Client Feature........................... Disabled
    Peer-to-Peer Blocking Action..................... Disabled
    Radio Policy..................................... All
    DTIM period for 802.11a radio.................... 1
    DTIM period for 802.11b radio.................... 1
    Radius Servers
       Authentication................................ Global Servers
       Accounting.................................... Global Servers
          Interim Update............................. Disabled
          Framed IPv6 Acct AVP ...................... Prefix
       Dynamic Interface............................. Disabled
       Dynamic Interface Priority.................... wlan
    Local EAP Authentication......................... Disabled
    Security
       802.11 Authentication:........................ Open System
       FT Support.................................... Disabled
       Static WEP Keys............................... Disabled
       802.1X........................................ Disabled
       Wi-Fi Protected Access (WPA/WPA2)............. Enabled
          WPA (SSN IE)............................... Enabled
             TKIP Cipher............................. Enabled
             AES Cipher.............................. Disabled
          WPA2 (RSN IE).............................. Enabled
             TKIP Cipher............................. Disabled
             AES Cipher.............................. Enabled
                                                                   Auth Key Management
             802.1x.................................. Disabled
             PSK..................................... Enabled
             CCKM.................................... Disabled
             FT-1X(802.11r).......................... Disabled
             FT-PSK(802.11r)......................... Disabled
             PMF-1X(802.11w)......................... Disabled
             PMF-PSK(802.11w)........................ Disabled
          FT Reassociation Timeout................... 20
          FT Over-The-DS mode........................ Enabled
          GTK Randomization.......................... Disabled
          SKC Cache Support.......................... Disabled
          CCKM TSF Tolerance......................... 1000
       WAPI.......................................... Disabled
       Wi-Fi Direct policy configured................ Disabled
       EAP-Passthrough............................... Disabled
       CKIP ......................................... Disabled
       Web Based Authentication...................... Disabled
       Web-Passthrough............................... Disabled
       Conditional Web Redirect...................... Disabled
       Splash-Page Web Redirect...................... Disabled
       Auto Anchor................................... Disabled
       FlexConnect Local Switching................... Enabled
       flexconnect Central Dhcp Flag................. Disabled
       flexconnect nat-pat Flag...................... Disabled
       flexconnect Dns Override Flag................. Disabled
       flexconnect PPPoE pass-through................ Disabled
       flexconnect local-switching IP-source-guar.... Disabled
       FlexConnect Vlan based Central Switching ..... Disabled
       FlexConnect Local Authentication.............. Disabled
       FlexConnect Learn IP Address.................. Enabled
       Client MFP.................................... Optional
       PMF........................................... Disabled
       PMF Association Comeback Time................. 1
       PMF SA Query RetryTimeout..................... 200
       Tkip MIC Countermeasure Hold-down Timer....... 60
       Eap-params.................................... Disabled
    AVC Visibilty.................................... Disabled
    AVC Profile Name................................. None
    Flow Monitor Name................................ None
    Split Tunnel (Printers).......................... Disabled
    Call Snooping.................................... Disabled
    Roamed Call Re-Anchor Policy..................... Disabled
    SIP CAC Fail Send-486-Busy Policy................ Enabled
    SIP CAC Fail Send Dis-Association Policy......... Disabled
    KTS based CAC Policy............................. Disabled
    Assisted Roaming Prediction Optimization......... Disabled
    802.11k Neighbor List............................ Disabled
    802.11k Neighbor List Dual Band.................. Disabled
    Band Select...................................... Disabled
    Load Balancing................................... Disabled
    Multicast Buffer................................. Disabled
     Mobility Anchor List
     WLAN ID     IP Address            Status
    802.11u........................................ Disabled
    MSAP Services.................................. Disabled
    Local Policy
    Priority  Policy Name

    As long as you take the configuration backup downgrading from 7.6.100.0 to 7.4.121.0 should be fine. Because this is Flexconnect deployment, make sure you review the release notes thoroughly as config like vlan mapping is impacted it is painful to reconfigure.
    I still think moving to 7.6MR3 & once 8.x get stable going for that code is a good plan. Though 7.4.121.0 is assure wave it does not mean it has no bugs.(remember that prior to this 7.4.110.0 was assure wave & it deferred in quick time) . I would say 8.x going to be the code staying for long time period, so ultimately you have to be there.
    In 8.x there are few FlexConnect improvements,one being AP won't reload when you change from local mode to FlexConnect.
    HTH
    Rasika
    **** Pls rate all useful responses ***

  • In using mail with my mackbook air with maverick, to open a message takes time as if the message is downloaded & its same every time I want to open the message from inbox.

    In using mail with my mackbook air with maverick, to open a message takes time as if the message is downloaded & its same every time I want to open the message from inbox.

    WoW! I'm surprised by the speed you reply and how serious you are with your answers! Thank you very much guys!!!
    Replying to Toad-Hall:
    I have a proper mailing list created as the manual says. It's a small group of contacts that exist in the address book. I do not type them as CC I just write "clients" and before I finish the word the name of the list appears.
    How can I stop Avast from scanning out going mail? It's the free version and I haven't found a real solution. I also tried to totally turn off the "mail shield" but I kept facing the same issues. However, I just turned it off and tried to send the mail, I didn't restart windows or thunderbird
    The idea with ipage server was fantastic! It would never come to my mind!!! As far as I see, the limit is 250 mails per hour. I doubt if I have ever reached the 50% of it. I also don't reach the bandwith limits... Besides that, if I had exceeded the limit I would get multi responses that "mail was not delivered".
    I want to thank you both for your excellent help so far. I'm sad to say that I still haven't solved the issue. When I made smaller lists, with the same addresses chosen from the address book I could send the messages, having a short delay. I would blame Avast but I tried the same on another laptop with my favourite NOD32 and had the same problem.
    What else should I check? Should I focus on Avast?

  • SocketException in client authentification

    Hello,
    I try to establish a connection to a Apache SSLServer using client authentification. Apache is configured right as I can authentificate my client cert with InternetExplorer.
    When I try to connect from a java client I always get a
    java.net.SocketException: Cannot send after socket shutdown: JVM_recv in socket input stream read.
    Does anybody know a solution? As I can see in the trace and in Apache's log the client doesn't send his client although there's a cert chain in my keystore.
    Any suggestions??
    Regards,
    Schlunz

    I use the ClientWithAuth - example from Sun. I only created a keystore containing my ca and client cert and referenced that keystore with its password.That code runs in ServerAuthMode without problems (on my machine)....
    Regards,
    Schlunz

  • How to execute one .exe file with as3 in air ?

    Hi
    How to execute one .exe file with as3 in air?
    I want do this work without fscommand .
    plize help me .

    itsdhanasaraa wrote:
    But as this a web application ... By using Runtime i'm getting some probs ..
    Let me guess, you want your web application to run a program on the client and to your surprise that's not working?
    Ain't gonna happen.
    its taking more time to execute .... that's y is there any other option to execute .exe file other than Runtime.getRuntime().exec("filename");Write proper English and you may be taken more seriously.
    1) it's not "taking more time to execute", whatever that's supposed to mean.
    2) there's no other way to execute something. Not that you should every use even that way anyway
    3) whenever you start thinking of executing external programs from Java, start thinking of not using Java in the first place.

  • Any support for SecureSocket on iOS in AIR 3.2?

    Hi there,
    I'm developing an energy metering application where we currently support web browsers running Flash Player 11. The plan is to support the applicaton also on mobile devices and I was glad to see all the improvements in CS 5.5 for targeting both Android and iOS devices. One problem though, we are using the SecureSocket class for secure communication towards a server. Works perfect on Android devices, already with AIR 2.6. However, there doesn't seem to be any support on iOS for SecureSocket. Even with the latest AIR 3.1 release the .isSupported property returns a brutal FALSE when checked.
    Is there any information available on any time schedule for a SecureSocket class for iOS? I'm very much facing a dead end here, I have a perfect solution but can't make it work on the most important mobile platform for our customer (both iPhone and iPad).
    I would appreciate any information you may have in this matter.

    We added DHE support in ASA 8.4.4 (AFAIR) 9.1.2, but it's still not in on Anyconnect even in 3.1, at least the internal enhancement request is not fulfilled.
    If I may know, where is this quesiton coming from? We added Suite-B support to both AC and ASA (and IOS), I have not seen DHE mandated anywhere (granted I have limited visibility).
    http://www.cisco.com/en/US/docs/security/asa/asa91/release/notes/asarn91.html#wp685480

  • Any compatibility issues using MacBook with client's A/V setups geared towards PCs?

    I travel giving PowerPoint seminars to US companies. I bring my PC laptop and plug into their projector.  I'm considering switching from my 12" ThinkPad to the MacBook Air 13".  In that every one of my clients for the past 13 years have used PC machines will I encounter any compatibility problems with clients' PC A/V setups?

    Ok, I solved the problem. Thanks to those who at least thought about replying.
    For those having the same issue: I found the problem lies in the "hot plug detect" feature of dvi. What I did I just cut the hot plug pin (see wikipedia:dvi) off the dvi adaptor, isn't it clever? Hah, I wouldn't call it "plug 'n play", but at least it works. Then I connect the dvi to the g2400w and set the monitor "hdmi in", then detect displays from display settings, it'll detect it, and then simply i set the monitor to dvi in.

  • TS3899 Cannot send email with new iPad air.  Works fine with old iPad and iPhone.

    Cannot send email with new iPad air.  Works fine with old iPad and iPhone.  I have deleted account and reinstalled.

    Thanks.  I got the problem fixed.  Spent time with the Apple folks and was kicked up to a senior advisor.  It seems the problem was with my internet provider - Tmie Warner.  Remember I could use the old ipad and the iphone to send mail.  I checked all the specifics between the three units.  It seems that TW is changing over from the RR.com  to TWC.com.  Since the new ipad air was just set up, it fell under the new TWC mail specifics. 

  • Adobe Creative Cloud - How To Share Files With Clients and Colleagues | Creative Suite Podcast: Designers | Adobe TV

    In this episode of the Adobe Creative Suite Podcast, Terry White shows how to share Photoshop, Illustrator and InDesign Files with clients and colleagues and all they'll need is a browser to comment and see your Photoshop Layers.
    http://adobe.ly/10ZjpE4

    Terry,
    I guess I miss something. How can I share a folder of photos? When I return from a shoot, I select 20 of the pictures and need to share them with my client to pick up the favorites. Am I supposed to copy and past an URL for each image separately?
    Sometimes I also work with a colleague, I need to share my favorites with him. Same issue.
    We have tried Adobe Cloud, and then went for Dropbox. There we can share a folder and he can put even his pictures in it as well. That's what I call collaboration. And it is free (unlike Adobe Cloud). If you have some word in Adobe, please tell them to either drop it and make a deal with services like Dropbox, or make it properly.
    Thanks.
    Vaclav

  • SSL VPN with client, anyconnect.

    I've set up a simple test on SSL VPN with client on a 3800.
    It didnt work. I assume i have to turn on the IP http server so that the client can hit it.
    but when I turned it on, the client goes to SDM, nothing with ssl vpn happened. it tells me the pay is not available.
    The underlying routing is fine.
    Could you tell me where it is configured wrong?
    Config is copied below.
    thanks,
    Han
    =======
    Current configuration : 3340 bytes
    version 12.4
    service timestamps debug datetime msec
    service timestamps log datetime msec
    no service password-encryption
    hostname Router
    boot-start-marker
    boot-end-marker
    enable password cisco
    aaa new-model
    aaa authentication login default local
    aaa session-id common
    no network-clock-participate slot 1
    crypto pki trustpoint TP-self-signed-3551041125
    enrollment selfsigned
    subject-name cn=IOS-Self-Signed-Certificate-3551041125
    revocation-check none
    rsakeypair TP-self-signed-3551041125
    crypto pki certificate chain TP-self-signed-3551041125
    certificate self-signed 01
    3082024F 308201B8 A0030201 02020101 300D0609 2A864886 F70D0101 04050030
    31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
    69666963 6174652D 33353531 30343131 3235301E 170D3131 31313135 31383238
    30365A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
    4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D33 35353130
    34313132 3530819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
    8100CFCF CFFAD76A 50DA82C9 8D4E3F90 64AD24EB 5409C5E2 43BC64F3 07F6C0E0
    29FF2D71 0DA0D897 2F814BD2 7F817503 429D4BC6 6AD6EEA4 DFA74BAD 0EAF84D5
    6ED55EC0 6C637178 BEEBCD1D 184BB90C CA84E974 48003885 87B53F2E 36A04661
    23DA2CBB DD8EEE1D 2F25AF9A E21DC288 BF76A17C C1F4BA07 95F09377 A12BE01A
    53750203 010001A3 77307530 0F060355 1D130101 FF040530 030101FF 30220603
    551D1104 1B301982 17526F75 7465722E 776E7362 6E6F632E 696E7465 726E616C
    301F0603 551D2304 18301680 14BE9E8F ED788928 560D7CA1 EED89B0D DE34D772
    5D301D06 03551D0E 04160414 BE9E8FED 78892856 0D7CA1EE D89B0DDE 34D7725D
    300D0609 2A864886 F70D0101 04050003 818100BC 4A2A3C47 7BF809AF 78EE0FD9
    73692913 F280765E BAFAECAB ED32C38D 3030810B C62C7F45 13C8A6EE AE96A891
    CDD4C78B 803299AD EB098B27 383CEF6F 0E2B811F 3ECFADBA 07CD0AC6 BBB8C5FE
    B2FC0FD8 562B7100 BB28036E 4575D1F5 B17687C6 8EACBD66 A9E52FEE A030E69A
    CAAE9F1B 618FA59D 02C25BC8 77D6CAC2 C7E56F
    quit
    dot11 syslog
    ip cef
    multilink bundle-name authenticated
    voice-card 0
    no dspfarm
    username cisco1 privilege 15 secret 5 $1$L2RA$Zqs6FLce5Ns5fny5aRL49/
    archive
    log config
    hidekeys
    interface GigabitEthernet0/0
    ip address dhcp
    duplex auto
    speed auto
    media-type rj45
    end
    interface Loopback1
    ip address 1.1.1.1 255.255.255.0
    interface GigabitEthernet0/0
    ip address dhcp
    duplex auto
    speed auto
    media-type rj45
    ip local pool svc-poll 1.1.1.50 1.1.1.100
    ip forward-protocol nd
    ip route 0.0.0.0 0.0.0.0 192.168.1.254
    ip http server
    no ip http secure-server
    control-plane
    line con 0
    logging synchronous
    line aux 0
    line vty 0 4
    scheduler allocate 20000 1000
    webvpn gateway SSLVPN
    ip interface GigabitEthernet0/0 port 443
    ssl trustpoint local
    inservice
    webvpn install svc flash:/webvpn/svc.pkg
    webvpn context SSLVPN
    ssl authenticate verify all
    policy group default
       functions svc-required
       svc default-domain "test.org"
       svc keep-client-installed
       svc split dns "primary"
    default-group-policy default
    gateway SSLVPN
    inservice
    end

    Using the SDM follow the below config example
    http://www.cisco.com/en/US/products/ps6496/products_configuration_example09186a008071c58b.shtml
    The text "cisco 3800 ssl vpn configuration" in my favorite search engine, identified the above.
    HTH>

  • Problem with SharedObject in AIR 3.5 IOS

    Hi,
    I've been compiling my ios app with AIR 3.4 since it has been released and a week ago I downloaded AIR 3.5 and uploaded my app compiled with AIR 3.5. But I realized there has been a problem with sharedobject in AIR 3.5.
    I used var sharedObject:SharedObject = SharedObject.getLocal("myScores"); this code to save the game score and every time I uploaded my app it worked out. It has never lose the game score.
    But with AIR 3.5 all game scores are gone. I didn't change any code about sharedobject. What's going on here? Now my customers will be upset to losing their information and even money they purchased through in-app purchase.
    The thing is AIR 3.4 was fine but AIR 3.5 seems to be the problem.
    Please HELP ME!!

    We also replied in the bug report.
    It is a really serious problem.
    We experienced it also in AIR 3.7.
    It is only happening on iOS. Android works fine.
    It happens with these both methods:
    var mySharedObject:SharedObject = SharedObject.getLocal("deutscheWitze");
    FlexGlobals.topLevelApplication.persistenceManager.setProperty("soundCheck", "yes");
    Only some users experience the problem.
    We think it has something to do with the compilation or installation of the app.
    Best
    omi

  • TS3276 ppl i fed up with my mac air while using my exchange email account, it takes ages to refresh and it doesn't send or receive instantly , no clue although that the same setting and server names has been set up on my iPhone and it is working fine

    ppl i fed up with my mac air while using my exchange email account, it takes ages to refresh and it doesn't send or receive instantly , no clue although that the same setting and server names has been set up on my iPhone and it is working totally fine

    Install ClamXav and run a scan with that. It should pick up any trojans.   
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • How do i share files with my macbook air?

    I am trying to share files on my iMac with my Macbook Air.  what are my basic steps for doing so.  They both exist on the same wifi network.

    OS X Yosemite: Share your files with other Mac users

Maybe you are looking for