Securestore files missing during CI installation

Hi Experts,
We have done with SCS and DbInst installatation of SAP PI7.1. During Primary instance installation, while inputting the parameters it asked for the location of secure store files to be copied. I gave the location
CIhost\usr\sap\SID\sys\global\security\data and tries with
dbhost\usr\sap\SID\sys\global\secuity\data. But since both of these folders were empty. So I got error message pop up that , the files SecureStore.properties and Securestore.key not found.Could anyone please help me. It should have been created as part of Database Instance installation. But if it is not what is the next step?
Thanks and REgards
Syam

Whatever mentioned in the thread was already tried during the DI installation. But it did not help us to get it right. We had a slight difference in the error message. It was like this.
The Import packages that failed are :
Loading of 'SAPSSEXC' import package: ERROR
Loading of 'DOKCLU' import package: ERROR
Loading of 'SAPAPPL0' import package: ERROR
Loading of 'SAPAPPL2' import package: ERROR
In all the Above Cases the log file had these errors:
Files\sapinst_instdir\NW71\INSTALL\SYSTEM\MSS\DISTRIBUTED\PI\DB\SAPAPPL0.TSK.bck already seems to exist
a previous run may not have been finished cleanly file C:\Program Files\sapinst_instdir\NW71\INSTALL\SYSTEM\MSS\DISTRIBUTED\PI\DB\SAPAPPL0.TSK possibly corrupted
Any other suggestions?

Similar Messages

Your APPL_TOP has 25 files missing during maintain snapshot

Hi Gurus,
OS: Solaris 10
EBiz: 12.1.3
DB: 11.2.0.3
I was doing Maintain Snapshot before starting Platform Migration... got following error
Note: Your APPL_TOP has 25 files missing. Some of these files are referenced
in your file drivers but are missing in the APPL_TOP.
I used the "Check for Missing files " option of adadmin and got the files list.
==================
/viserp/erpapp/appl/cll/12.0.0/bin
/viserp/erpapp/appl/cll/12.0.0/bin/clltxptnr.sh
/viserp/erpapp/appl/au/12.0.0/forms/PTB/CLLEPGIP.fmb
/viserp/erpapp/appl/cll/12.0.0/forms/PTB/CLLEPGIP.fmx
/viserp/erpapp/appl/au/12.0.0/forms/PTB/CLLEPHIP.fmb
/viserp/erpapp/appl/cll/12.0.0/forms/PTB/CLLEPHIP.fmx
/viserp/erpapp/appl/au/12.0.0/forms/PTB/CLLRIOIN.fmb
/viserp/erpapp/appl/cll/12.0.0/forms/PTB/CLLRIOIN.fmx
/viserp/erpapp/appl/au/12.0.0/forms/PTB/CLLRIRAC.fmb
/viserp/erpapp/appl/cll/12.0.0/forms/PTB/CLLRIRAC.fmx
/viserp/erpapp/appl/au/12.0.0/forms/PTB/CLL_F041_COMP.fmb
/viserp/erpapp/appl/cll/12.0.0/forms/PTB/CLL_F041_COMP.fmx
/viserp/erpapp/appl/au/12.0.0/forms/PTB/CLL_F041_FRMT.fmb
/viserp/erpapp/appl/cll/12.0.0/forms/PTB/CLL_F041_FRMT.fmx
/viserp/erpapp/appl/au/12.0.0/forms/PTB/CLL_F041_MMHL.fmb
/viserp/erpapp/appl/cll/12.0.0/forms/PTB/CLL_F041_MMHL.fmx
/viserp/erpapp/appl/au/12.0.0/forms/US/CLLEPGIP.fmb
/viserp/erpapp/appl/cll/12.0.0/forms/US/CLLEPGIP.fmx
/viserp/erpapp/appl/au/12.0.0/forms/US/CLLEPHIP.fmb
/viserp/erpapp/appl/cll/12.0.0/forms/US/CLLEPHIP.fmx
/viserp/erpapp/appl/au/12.0.0/forms/US/CLLRIRAC.fmb
/viserp/erpapp/appl/cll/12.0.0/forms/US/CLLRIRAC.fmx
/viserp/erpapp/appl/au/12.0.0/forms/US/CLL_F041_COMP.fmb
/viserp/erpapp/appl/cll/12.0.0/forms/US/CLL_F041_COMP.fmx
/viserp/erpapp/appl/au/12.0.0/forms/US/CLL_F041_FRMT.fmb
/viserp/erpapp/appl/cll/12.0.0/forms/US/CLL_F041_FRMT.fmx
/viserp/erpapp/appl/au/12.0.0/forms/US/CLL_F041_MMHL.fmb
/viserp/erpapp/appl/cll/12.0.0/forms/US/CLL_F041_MMHL.fmx
/viserp/erpapp/appl/cll/12.0.0/mesg/PTB.msb
===============
Next what steps to be done ?
Thanks,
Chinmay
Edited by: ChinmayDBA on Apr 24, 2013 9:11 AM

Do you use CLL product? I can't find this product top in any of my instances so if those files are not used you can simply ignore this error.
Thanks,
Hussein

Preserve file system during OS installation

Hello all,
I would like to know why every time I would like to preserve a file system, I would not be able to allocate all space in the system to be full used? Let's say, in a 8GB hard-disk, I want to preserve a slice 4, which is of size 1GB. After I have allocated all other file systems, there was a remaining of about 5GB space. But when I want to allocate this space to slice 7, let's say /export, the system would return an error msg saying not enough space. I could only used about 2GB out of 5GB free space to allocate the last slice. Why this happen?
Thank you all in advanced.

Although I have not tried this, it might work. Can you add your yum repo in the kickstart %post of your RHEL 6 Template? If it allows you to do a full yum update on the chrooted file system, it would be followed by a reboot before tools are installed. The template is probably found in /opt/vmware/etc/build/<RHEL 6 TEMPLATE DIR>/<RHEL 6 FILE>.xsl.

The javac executable is missing during ECC6 installation

Before I installing a fresh ECC6 on W2K3 64bit, I have installed Java version 1.4.2.18 and added in the environment variables.
But i hit problem at the stage of Java Development Kit. The error message was "Directory C:\j2sdk1.4.2_18 is not valid JDK directory:the javac executable is missing.

You need to use the correct JDK. If your system is 64bit you need to download the 64bit JDK.
See note 941595 - Download J2SE 1.4.2 for the x64 platform
Markus

During iTunes installation "Registering iTunes automation server"... I am getting following error messag from "Microsoft visual C runtime Library"... Runtime Error! Program: C:\program files (x86)\iTunes\iTunes.exe

During iTunes installation, when it comes to installation phase "Registering iTunes automation server"... I am getting following error message:
"Microsoft visual C++ runtime Library"...
"Runtime Error! Program: C:\program files (x86)\iTunes\iTunes.exe"
"R6034
An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team for more information."
My system is Windows 7 Enterprise - Service Pack1

Check the user tip below.
https://discussions.apple.com/docs/DOC-6562

Trying to install Acrobate 8 Standard on PC with Windows 7, 64 bit. During the installation I was asked to provide "File Adobe PDF.dll for Windows Vista. How can I obtain the required file?

Trying to install Acrobate 8 Standard on PC with Windows 7, 64 bit. During the installation I was asked to provide "File Adobe PDF.dll for Windows Vista. How can I obtain the required file?

Nothing in the Acrobat 8.x product family is compatible with Windows 7 (or any contemporary OS).
The Acrobat 8.x product family passed into End of Support way back -- (November 2011).
The current release of Acrobat (XI) is compatible in Windows 7.
Be well...

I'm trying to install the new version, but each time during the installation, "Error writing to file: C:/Program Files (x86)/Common Files/Apple/Mobile Device/Support/AppleMobileDeviceHelper.resources/Info.plist." Keeps popping up. What am I doing wrong?

I'm trying to install the new version, but each time during the installation, "Error writing to file: C:/Program Files (x86)/Common Files/Apple/Mobile Device/Support/AppleMobileDeviceHelper.resources/Info.plist." Keeps popping up. What am I doing wrong?

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

To restore the missing files, use the iWork Installer to reinstall iWork.

To restore the missing files, use the iWork Installer to reinstall iWork.
What can i do ?

do you happen to know if there is a way to do this with a flash drive to avoid buying a new external dvd burner for the newer macks a lot of us have?

When is ORATAB file created during Installation?

DB version:10gR2
When is ORATAB file created during installation. Is it created when we run rootpre.sh?

Hi,
Normally the path is in Oracle_home only for example,
/u01/app/oracle/product/10.1.0/db_1/root.shYou will be prompted for that while installation goes on.
@Nicolas,
Apologies for the same reply as I didnt refresh the page before posting.
Aman....
Message was edited by:
Aman....

Am trying to download itunes as it has previously deleted during an update, and it comes up during the installation that there is a file error with my resources

Am trying to download itunes as it has previously deleted during an update, and it comes up during the installation that there is a file error with my resources

That's perfect, thanks.
error writing to file: C:\Program
files\ i tunes\ i tunes.Resources\ja.lproj\AppleTVStream
itxib. Verify that you have access to that directory
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Missing the itunes installation file

i am missing the itunes installation file and thus can't uninstall old version or install new version - can someone help? thanks in advance

Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Ing to upgrade\itunes but keeps saying installer files missing

have tried to upgrade itunes to latest version it gets so far and then i get a window that says there are installer files missing

then i get a window that says there are installer files missing
What's the precise text of that message please, sherie? (There's a few different ones I can think of that you might be getting.)
If it's easier, you could try posting a screenshot of the error message box.
Generate the error message again. While the error message box is open, hold down the Alt key and hit the PrtSc key. Paste the screenshot into an image file (using a program like Paint), and save the file.
Start a reply here and click the wee camera icon at the top of the reply window. Click "Choose file", browse to the image file, select the file and click "Open". Now click "Insert file" to insert the screenshot into the reply.

Error during server installation..(NW2004s installlation with PI)...

Hi all,
I am getting this error during server installation..(NW2004s installlation with PI)...
Execution of the command "C:\j2sdk1.4.2_09\bin\java.exe -classpath migmon.jar -showversion com.sap.inst.migmon.imp.ImportMonitor -dbType ORA -importDirs
ctsintcosnw1\dump\NW04s_AIX\EXPORT_51031504\EXP1;
ctsintcosnw1\dump\NW04s_AIX\EXPORT_51031504\EXP2;
ctsintcosnw1\dump\NW04s_AIX\EXPORT_51031504\EXP3 -installDir "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS" -orderBy size -r3loadExe C:\usr\sap\LXI\SYS\exe\uc\NTI386\R3load.exe -tskFiles yes -extFiles yes -dbCodepage 4103 -impJobNum 3 -jobNum 3 -monitorTimeout 30 -loadArgs " -stop_on_error" -trace all -sapinst" finished with return code 2. Output: java version "1.4.2_09"Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_09-b05)Java HotSpot(TM) Client VM (build 1.4.2_09-b05, mixed mode)Required system resources are missing or not available: Import directory '
ctsintcosnw1\dump\NW04s_AIX\EXPORT_51031504\EXP1' does not exist; Import directory '
ctsintcosnw1\dump\NW04s_AIX\EXPORT_51031504\EXP2' does not exist; Import directory '
ctsintcosnw1\dump\NW04s_AIX\EXPORT_51031504\EXP3' does not exist.
But the fact is the specified files are there in that specified location..(it is in mapped drive and i am working through remote logon)..
waiting for ur relies..
Its highly needed..
Points will be rewarded definitely..
With regards,
Manikandan Rajendran,
Cognizant.

Hi Manikandan,
Mapping the drives is not enough, you need to make sure that <sid>adm and SAPservice<sid> have enough rights to access those paths...
Hope this help!
Juan

During patchset installation I am facing problem in relink stage

Dear Experts.
I am facing this problem during patchset installation.
Oracle Database Version = 10.1.0.4
Patch = 10.1.0.5
OS = Oracle Linux 5 x64 bit
Its seems I am missing some rpm, but I am unable to determine. Please help me.
/bin/chmod 755 /app/oracle/infra/bin/
- Linking trcroute
rm -f trcroute
gcc -o trcroute -L/app/oracle/infra/network/lib/ -L/app/oracle/infra/lib/ -L/app/oracle/infra/lib/stubs/ /app/oracle/infra/network/lib/s0nur.o /app/oracle/infra/network/lib/nur.o -lclntsh `cat /app/oracle/infra/lib/ldflags` -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /app/oracle/infra/lib/ldflags` -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lmm -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /app/oracle/infra/lib/ldflags` -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /app/oracle/infra/lib/ldflags` -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /app/oracle/infra/lib/sysliblist` -Wl,-rpath,/app/oracle/infra/lib -lm `cat /app/oracle/infra/lib/sysliblist` -ldl -lm -L/app/oracle/infra/lib -L/app/oracle/infra/lib/stubs/
/usr/bin/ld: cannot find -lclntsh
collect2: ld returned 1 exit status
make: *** [trcroute] Error 1
End output from spawned process.
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'install' of makefile '/app/oracle/infra/network/lib/ins_net_client.mk'. See '/app/oracle/oraInventory/logs/installActions2011-01-13_12-15-17PM.log' for details.
Exception Severity: 1
*** Cancel Dialog: ***
User Selected: Stop installation of all products.
Error in invoking target 'install' of makefile '/app/oracle/infra/network/lib/ins_net_client.mk'. See '/app/oracle/oraInventory/logs/installActions2011-01-13_12-15-17PM.log' for details.

Hi,
Can you please check the log file of this installation:
'u01/app/oracle/oraInventory/logs/installActions2011-01-13_12-15-17PM.log
Verify yourself,If you are still not getting post the message inside this log file.
Best regards,
Rafi.
http://rafioracledba.blogspot.com/

Database Template File missing

Hi everyone,
I'm trying to set up a installation of OCS over multiple computers. The Infrastructre installation works fine withouth any error and all services are up and running. Now I'd like to install and set up the storage database. While running the DBCA, I get an error message stating, that the database layout template file with the extension .dfj is missing. Is this a common problem or could it be that something went wrong while unzipping the file?
The template file for the Infrastructure database is located in both the unzipped installation files AND in the home directory for the Infrastructure.
The installation of the information store also was successfull, but as stated above, i only get an error message while configurating the new database...
Is it possible to tackle the problem in creating a standard new datbase with this assistant?
thank you and happy new year in advance
stefan

Just bumping this thread because I am having the same problem. Is there some configuration setting I missed during installation or can I find this "Transaction_Processing.dfj" file somewhere else?
Thanks for the help.

Securestore files missing during CI installation

Similar Messages

Maybe you are looking for