Securing messages in XI..How?

Hi,
Our client currently looking for securing message in XI.As client concern other than developer no one can able to see the message payload in sxmb_moni.
Can you tell me what are the possible ways to secure maessages in XI3.0 SP14.
As per our plan ,Our scenario : SAPHR(IDOC)->XI--> Secure FTP(CSV)
We have plan to extract Employee records from SAPHR through IDOC and sending as CSV format to SFTP. For this, how do we secure or encrypt data from SAPHR. As we know we do not use IDOC sender adapter for this sender side. So we do not have chance to use module level security .Please let me know is there any other ways for make secure as payload from SAPHR-IDOC?
Other thing is receiver side, as i know SAP doesn't support SecureFTP , how we will post csv files into SFTP? Does ftp(file) adapter required any additional settings ? also required notes or comments for securing messages at receiver side?
Last but least: For this scenario how do we achieve exceptions for each and every level?
Please do share your experience and get best rewards for that,.
Appreciated your time and thanks in advance.
Thanks,
PILearn.

Hi,
You can control SXMB_MONI transaction using User profiles & Roles or dont give the authorisations of this transactions to users. you can also use SU53 to determine the values of authorisation objects & thus you can control SXMB_MONI.
On receiver side you can try with FTPS as XI supports to it.
You can configure Alert Management for handling exceptions or erros in XI.
Regards
Sushil

Similar Messages

I'm unable to open Safari. I keep getting a alert security message Suspicious Activity Might Have been Detected. How can I fix this proplem?

I'm unable to open Safari. I keep getting a alert security message Suspicious Activity Might Have been Detected. How can I fix this problem?

You may have installed the "VSearch" trojan. Remove it as follows.
Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Reset the home page and default search engine in all the browsers, if it was changed.
Step 2
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Internet criminal behind VSearch has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

How can I change my phone number for the security message

i cant send to my new phone numbte the security message, what can i do

Welcome to the Apple Community Paulette.
If you are referring to the keychain phone number...
Go to System Preferences > iCloud > Account Details, you can change your verification number in the options provided there.
Go to Settings > iCloud > Account > Keychain, you can change your verification number in the options provided there.

SSO to ITS through WebSEAL gives secure/non-secure messages

Hi
We running the following setup:
EP6 SP14
Stand-alone ITS 6.20 patch 18
4.7 R/3 Enterprise
TAM/WebSEAL 5.1
We are running SSO through WebSEAL to the portal and everything seems to be working just fine.
But when we try to access a transactional iView or an IAC iView running on the ITS server I get a pop-up message saying "This page contains both secure and nonsecure items."
We are accessing WebSEAL through HTTPS, we are running HTTPS between WebSEAL and the portal and HTTP between WebSEAL and ITS.
I have tried to access the ITS through WebSEAL without using the portal, and I still get the message. So it must be something between the WebSEAL and the ITS server.
Does anybody have any ideas what is causing this?
Cheers,
Jacob Vennervald

The "secure and non-secure" message, displayed when accessing ITS through WebSEAL when using IE and HTTPS, is caused by an empty source reference (<IFRAME ... SRC="" ...>) within the ITS menu page (...d_menu.html).
The integration guide, available on the <a href="http://www-1.ibm.com/support/docview.wss?uid=swg24003605">IBM website</a> and the <a href="http://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/developerareas/ibm">SAP SDN</a>, contains the information on how to stop the message from appearing.
The message should not be displayed when accessing ITS through WebSEAL using HTTP.
Regards,
Peter Tuton.

I just wondering can I ask a user in firefox web browser after they have make a decision on one particular dialog box(e.g. security message choices)?

Hi
Basically I am doing a research on usability of information security. I would like to assess how likely people love or hate the security message that being presented to them. so I would like to present a dialog box asking their satisfaction after they have made decision upon security message they received (from web browser). If you could advise me on this. we can have a further discussion and it might be useful for you as developer in future as well. (collaborate for articles and journals publications) Please advise.

This issue can be caused by an extension that isn't working properly.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You have quite a few extensions installed, so this may be difficult to track down.

WPF WebBrowser Control Security Message After Loading Local XML File

When I use the .Source property of the WebBrowser control, it displays the XML file I pointed to, but then puts a security banner at the top, stating that some content has been disabled. I can't figure out how to stop that warning from appearing.
I've played with IE security settings, to no avail.
I've found some articles about putting a "mark of the web" tag inside the XML file, but I can't do that because the files are created by a 3rd-party application, and I can't edit all of them.
Isn't there a simple way to just turn off the feature for the WebBrowser control without messing with my IE security settings?
Thanks...
Ron Mittelman

Ok, I did exactly what you suggested. Brand new project. Instead of using the file dialog, I just hard-coded the path to my xml-type file directly, as your prior suggestion stated. The actual statement was:
string myFile = @"file://127.0.0.1/c$/data/local/JMPS/data/CRD CWD Routes/myFile.crd";
Then I used the proper code to set the Source property of the WebBrowser. The file is really, really there, I promise. Upon running, I get a dialog box saying that it "cannot find 'file://127.0.0.1/c$/data......."
So there is some reason this will not work. I am working in a high security area, so perhaps the machines are locked down to the extent that the method won't work?
Can you explain why this method *should* work? Why does using the IP address format defeat the security message?
Is there perhaps some other method? Some of the articles I read talked about putting a "mark of the web" tag inside the xml file. Is this a possible option? I can't really modify the files, but if I could get NavigateToStream
or NavigateToString methods to work, I could insert that tag inside the xml file contents. Unfortunately, as my other post states, I'm having a lot of challenges getting that to work also.
I think that too is possibly caused by how locked down our development PC's are.
Thanks...
Ron Mittelman

I have a macbook, an ipad, and an iphone with the Mail app on all three synced through icloud, but when I read and delete emails on my phone, the inbox on my ipad is not update, so I have to go through and mark as read or delete messages again. How can I

I have a macbook, an ipad, and an iphone with the Mail app on all three synced through icloud, but when I read and delete emails on my phone, the inbox on my ipad is not update, so I have to go through and mark as read or delete messages again. How can I sync my iphone and ipad? (it seems like each is synced only to my laptop, so don't synchronize until I go home and use my laptop.

POP: yahoo, aol, comcast/time warnder/road runner
Imap: google, hotmail, and more including icloud.
If you want to use multiple devices - move to imap, I would even say "exchange", but Google does not support free exchange anymore, since January of that year. So Ironically Icloud or Hotmail would be my choices right now.
To find out more about what happens to you, search on Google "difference between pop and imap"

HT201401 iphone display is stuck in landscape mode in messaging window? how do I fix? Turning phone does not work

iphone display is stuck in landscape mode in messaging window? how do I fix? Turning phone does not work

issue solved, i turned off phone and then on again and all is well

I tried downloading the 30-day free trial and I kept getting "failed" message 49. How do I resolve this error?

I tried downloading the 30-day free trial and I kept getting "failed" message 49. How do I resolve this error?

Hi Charmaine,
Please follow the article: Error downloading, installing, or updating Creative Cloud applications which might help to solve the above error message.
Thanks,
Ratandeep Arora

HT204230 this device is not longer eligible for creating a free i cloud accounting on my Iphone 5s , my old not working now cannot opened again just when i try make a free email this Message showed up how i can fix it please help me iPhone 5s, iOS 8.3

this device is not longer eligible for creating a free i cloud accounting on my Iphone 5s , my old not working now cannot opened again just when i try make a free email this Message showed up how i can fix it
please help me
iPhone 5s, iOS 8.3

Create a new AppleID on a different iOS device or on a computer. You will
then be able to use that newly created AppleID on your iPhone.

Trying to install iCloud on Win7 get error message either no default mail client or current mail client cannot fulfill messaging request. How fix?

Trying to install iCloud on Win7 get error message either no default mail client or current mail client cannot fulfill messaging request. How fix?

Outlook 2013. Under Start Up Options, I have checked "Make Outlook the default program for E-mail, Contacts, and Calendar".

Contact phone numbers show instead of contact names on my iPad in text messages etc. How do I change it so their names show

contact phone numbers show instead of contact names on my iPad , text messages etc. How do I change it so their names show

Did you change your sim card? I had this same problem because I moved countries and had to add a 1 before the number and area code.

Contact phone numbers show instead of contact names in phone favorites, text messages etc. How do I change it so their names show

contact phone numbers show instead of contact names in phone favorites, text messages etc. How do I change it so their names show

Did you change your sim card? I had this same problem because I moved countries and had to add a 1 before the number and area code.

I bought an application in itunes. When i opened the application, it asked me the access key that was sent throught my email address. But when i open my email address, there was no message from apple. how was that? where can i get the access key?

i bought an application in itunes. When i opened the application, it asked me the access key that was sent throught my email address. But when i open my email address, there was no message from apple. how was that? where can i get the access key?

Apple doesn't send access keys for apps. Which app was this?

When deleting a message in mail, how do you get it to advance to the next message? whenever i delete a message it goes back to the previous message.

when trying to delete a message in mail, i would prefer to advance to the next message. i delete a message and the curser goes back to an earlier message. i usually delete the most recent messages first.

First of all, you've posted in the Snow Leopard forum, but your profile says you're running Leopard, not Snow Leopard. What version of Mac OS X are you really running? You should always be sure that your profile matches the forum you're posting in, otherwise the "solution" to your problem may be totally ineffective.
Part of your problem is that deleting Mail messages depends on how you have them ordered. If they are listed in Descending Date order (most recent at the top), and you want to delete a series of consecutive emails from an earlier time, you should select the last one in that group and press the Delete key; with each one that's deleted, the selection will move to the next one up the list. You could also select the first one in the group, then Shift-click on the last one in the group and press Delete to get rid of them in one step.
If you have them listed in Date Ascending order (most recent at the bottom), you would have to select the oldest message(s) you want to delete and select it (or them) and press the Delete key, and the selection would move down the list to the next most recent message in the window.

Securing messages in XI..How?

Similar Messages

Maybe you are looking for