Securit export to CMS Rich client

I can edit a webi report in infoview but when i use the Rich client i get the following error, "your security profile does not allows you to save the document in the specified location webi rich client" It doesn't matter which folder or even if it is in the users favorites. Where is the best place to start looking for security? thanks.

Hi,
It looks like the rights issue. Please check the below steps in resolving the issue
1.Login to Central Management Console
2.Go to Access Level and select the custom access level created.
3.Right Click on Access Level -> Included rights -> Add/Remove Rights.
4.Under general tab Grant "ADD Objects to folder" and "COPY Objects to another folder"
5.Grant the same rights for Application.
Test the report and report will be saved properly.
Also, Please checks the rights by going to the cmc and check the list of applications and their rights on that particular appication.
Regards,
Raja

Similar Messages

Remove Document Security Rich Client 3.1

Hi:
We are using Webi Rich Client 3.1 Service Pack 4 is there a way to have the default for Remove Document Security always checked vs. unchecked?
Thanks in advance.

Hi Rose,
Login to Central Management Console. Go to Access Levels and open the Access Level for the member experiencing this issue. Grant access to the "Web Intelligence Rich Client: Remove document security" in "Web Intelligence" entry under "Application" section.
All the Best,
Madhu....

Export Error on WebI Rich Client

Hi guys,
Is there any explanation or any suggested solution for the following problem..
(The reason of being able to export a huge report (greater than 9000 pages) as (.csv) on Infoview, while not being able to export it on WebI Rich Client?)

When i export the report as (.csv) on WebI Rich Client I got the error "Mapped Failed" with this following error:
Version:null Stack trace: com.businessobjects.webi.richclient.event.RCException: Map failed at com.businessobjects.webi.richclient.ConnectionAdapter$AdapterInstance.afterSaveDocument(Unknown Source) at com.businessobjects.webi.richclient.event.RichClientEventManager.fire(Unknown Source) at com.businessobjects.webi.richclient.ui.dialog.filesystem.FileSystemManager.fire(Unknown Source) at com.businessobjects.webi.richclient.ui.dialog.filesystem.FileSystemManager.saveDocument(Unknown Source) at com.businessobjects.webi.richclient.ui.dialog.filesystem.FileSystemManager.saveDocument(Unknown Source) at com.businessobjects.webi.richclient.ui.Framework.saveDocument(Unknown Source) at com.businessobjects.webi.richclient.ui.Framework.saveCurrentDocument(Unknown Source) at com.businessobjects.webi.richclient.ui.Framework.tcEventTriggered(Unknown Source) at com.businessobjects.wp.tc.bridge.ThinClientBridge.fireThinClientEvent(Unknown Source) at com.businessobjects.wp.tc.bridge.ThinClientBridge.fireThinClientEvent(Unknown Source) at com.businessobjects.wp.tc.TCMainPanel.actionPerformed(Unknown Source) at javax.swing.AbstractButton.fireActionPerformed(Unknown Source) at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source) at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source) at javax.swing.DefaultButtonModel.setPressed(Unknown Source) at javax.swing.AbstractButton.doClick(Unknown Source) at com.jidesoft.plaf.vsnet.VsnetMenuItemUI.doClick(Unknown Source) at com.jidesoft.plaf.vsnet.VsnetMenuItemUI$MouseInputHandler.mouseReleased(Unknown Source) at java.awt.Component.processMouseEvent(Unknown Source) at javax.swing.JComponent.processMouseEvent(Unknown Source) at java.awt.Component.processEvent(Unknown Source) at java.awt.Container.processEvent(Unknown Source) at java.awt.Component.dispatchEventImpl(Unknown Source) at java.awt.Container.dispatchEventImpl(Unknown Source) at java.awt.Component.dispatchEvent(Unknown Source) at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source) at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source) at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source) at java.awt.Container.dispatchEventImpl(Unknown Source) at java.awt.Window.dispatchEventImpl(Unknown Source) at java.awt.Component.dispatchEvent(Unknown Source) at java.awt.EventQueue.dispatchEvent(Unknown Source) at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source) at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source) at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source) at java.awt.EventDispatchThread.pumpEvents(Unknown Source) at java.awt.EventDispatchThread.pumpEvents(Unknown Source) at java.awt.EventDispatchThread.run(Unknown Source) Caused by: java.lang.RuntimeException: Map failed at com.businessobjects.wp.tc.JRPProxy.saveOnLocalFileSystem(Unknown Source) ... 38 more
Please Inform me with any suggested solutions if you dont mind.

WebI report in Rich Client refreshing - But not in the webbased WebI client

Dear experts,
I am quite new to BO and I am currently facing the following problem regarding our WebI reports:
I created a WebI report in the WebI Rich Client. This report accesses an OLAP universe, which in turn gets data from a SAP BW through a BI query. I also exported the report to the CMS. In InfoView, it is displayed correctly as well. The report displays the data alright.
Now here comes the strange part of it: When refreshing the report from within the WebI Rich Client, the data is being updated (the current BW data is being shown) as it is supposed to. BUT when refreshing the report from within the WebI Java client (in InfoView), the report would not update, i.e. it would not display the current BW data but instead the old data. When scheduling instance creation the instances would also not display the current data.
We are am running BO XI 3.1, no FixPacks.
Does anybody have a clue why this is happening?
Any hint would be appreciated.
Many thanks in advance!
Best,
Kai

Hi Ingo,
Many thanks for your reply!
The report would not refresh after I hit "Refresh data" ("Daten regenerieren" in German). Plus the newly created instances (one instance is being created every 5 mins) would also not show the current data.
The funny thing is that as soon as I go back to the Rich Client and hit "Refresh data" in the Rich Client, the report would always show the current data, never the old ones.
We should probably continue discussing in just one thread (Scheduled WebI report instances with differing values), this issue seems to be interrelated somehow anyway. Sorry for opening up multiple threads.
Thanks and best regards,
Kai

Enable save for all users in rich client document defaultly for all users

Hi,
Is there a option to enable save for all users in a rich client document defaultly for all users across the company. As the users who are creating reports are forgetting to check the box before sending the rich client document to others. Kindly let me know if you have any suggestions on this.
Thanks,
Karthik

I'd suggest that is is where your BO folder structure comes in. You can export from Rich Client to any folder that you have permissions to access - some sort of collaboration folder system would potentially be better and more secure than sending unsecured reports via email. If your IT security team found out that you were removing document security, I doubt they'd be impressed!
You can't do the default save for all users, simple as that (it's bad practice anyway, which is probably why you can't). While it's not the answer that you want to hear, it is the correct one.

WIS 30902 Error when opening a webi document from Rich client

Hi ,
When I try to open a webi document from local folder or import from CMS in Webi Rich client, I get the following error message.
"An error occured while checking the document security. (WIS 30902)"
Has any one come across this issue?
Thanks,
KartheeK

In our case, we could initialize Webi Rich Client (Webi RC) successfully , but later we found that any disruption in Webi RC client connection will corrupt the client ..\LocData files used by client to dock to the CMS, causing WIS 30902 error.
At first we thought just deleting the ..\LocData Client .lsi files fixed it. Unfortunately, there are a collection of files and folders in ..\Loc Data involved in the authentication. We already found that complete deinstall of Webi RC didn't work. Now we know the problem is in the \My Business Objects Documents\LocData values. Deinstall of Webi RC does not delete them.
It sounds scary, but isn't. The Webi RC will download the refreshed files it needs automatically from the CMS. However, it won't overwrite the old bad ones, and you have to do that manually.
Solution.
1. Logout of Webi RC. Make sure it is not running in taskmgr.
2. Go to the client ..\My Business Objects Documents\LocData folder.
3. Delete all the files and folders, or rename by adding .bak extension.
4. Logon with Webi RC
5. Corrupt files will now be resynchronized to CMS
-Doug Grant, Haworth BI / Business Objects Architect

Alpha Sorting of Universe and LOV in Webi Rich Client

We currently are using both Webi and Webi Rich Client XI3.1 SP4 in Webi the universes and the LOV sort Alpha Numeric automatically, however in the Rich Client the list of universes and the LOV are not sorting Alpha Numeric. In designer we have all the universes with the Force_Sort_LOV set to yes
Any suggestions on how to resolve this issue would be appreciated

Have you tried dropping the associated universe LOV and re-publish? This happened to us in the past.
Steps:
1) In the univ designer object properties, deselect the "associate a LOV" in Properties tab. Close. Save. Export to CMS. (this drops the LOV)
2) Go back in univ designer and check the associated LOVs again to rebuild then republish to CMS.
Does this work?

Doubts reg. Web Intelligence rich client.

Dear Experts,
I have seen in BOW310 Document "Web Intelligence Rich Client lets you continue to work with Web Intelligence documents (WID) when you are unable to connect to InfoView, when you want to perform calculations locally rather than on the server".
Now my Doubts are:
1. If we are not able to connect to InfoView then how will data come to WEB Rich Client in offline mode to perform the calculations?
2. Suppose Webi Rich Client is connected to the Server ie., in connected mode (not in disconnected mode) then calculations will be performed on the server or locally.
regards
Sam

Hello Sam,
If we are not able to connect to InfoView then how will data come to WEB Rich Client in offline mode to
perform the calculations?
The Webi Rich Client will allow you to work in offline mode if you have connected at least once to the relevant CMS. When you connect to the CMS, your security information is stored in an LSI file. It this LSI file that decides whether you have access to open a report.
When you're in offline mode (and have appropriate rights on the CMS), you will be able to
1. Create/ refresh documents if you have the appropriate universes and db middleware on your machine.
2. Only view, edit and save documents if you do not have the universes/ middleware. I.e. you can only work with data already saved with the report.
Suppose Webi Rich Client is connected to the Server ie., in connected mode (not in disconnected mode) then calculations will be performed on the server or locally.
This depends on how the Webi Rich Client (WRC) is launched.
1. If the WRC is launched via InfoView, then the WRC uses the same session as your InfoView session (no login is required), connects to the CMS over HTTP. All calculations are performed on the server.
2. If the WRC is launched locally (i.e. from the Start Menu / an icon), then communication with the CMS occurs via the CORBA framework. Your machine needs to have the middleware to connect to the DB and calculations are performed locally (on your machine).
Best,
Srinivas

No data in webby using IE or firefox but data in webby Rich client

hi everybody,
I got a newbie probleme with BO edge XI r3.1 trial version.
If i create a report on webby via infoview usin a webby universe (efashion eg) , no text appear in my report, inluding data and text titles even i type something (structure is ok)
If i import this report on webby rich client, all the text appear. If i export on infoview and if i open my exported report via infoview all is ok. If i change my query and add something opn my report, all previous data stay but the new text doesn't appear....
Thanks for your help
Herve
ps Java version is the last one, and i run my trial on a windows xp sp3 via oracle virtual box. I used express install.

Seems Java version problem.
Can you change Display properties for existing and new query objects : "Read Cell Content as" to "HTML" and see ??
If you can, then use Java build less than 20 : JDK1.6.0_20 less to this like _17 or _18.
It solves your problem.
One more reason you are having multiple Java versions installed on your machine.
Work around:
Uninstall all installed Java versions.
When you are working on Infoview, to view WebI reports data , at that it will ask you for Java Virtual Machine Install, now install it, which works good now.
Thank You!!

Connection error in Webi Rich Client Bobj 4.1 sp1

Hello Experts,
I am getting an error while connecting Bobj server(4.1 sp2) through Webi rich client (4.1 Sp1).
When i am trying to connect to CMC, i am able to connect it.
Please help on this.
Thanks in Advance
Bhasin

Hello Bhasin,
I have few questions ans steps for you.
1. Are you able to login into any other BO client tool?
2. Do you have multiple Network Cards [NICs] on BO Server box?
If YES, we need to prioritize it as below. Once donw bind primary IP with CMS. as mentioned below.
Change Network Binding Order:
Click Start, click Network, click Network and Sharing Center, and then click Change Adapter Settings.
Press the ALT key, click Advanced, and then click Advanced Settings. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
Click the Adapters and Bindings tab, and then, under Connections, click the connection you want to modify.
Under Bindings for <connection name>, select the protocol that you want to move up or down in the list, click the up or down arrow button, and then click OK.
Bind Primary IP with CMS:
Log onto Central Management Console (CMC).
Open Central Management Server (CMS) properties page, under
Host Identifiers: change from Auto assign to IP Address
Then input CMS server local IP address beside (IPv4).
Do this for each CMS.
Restart the CMS.
Good Luck
Regards,
Mahesh

Webi Rich Client 2-tier Vs 3-tier?

Could anyone explain what is 2-tier and 3-tier for Rich Client?
Thank you

When you login 3-tier will show a web app (j2ee or .net) in the system information, as it must connect to the connection server through the web/app. It will use the XI 3.x servers middleware connection for refreshing report data.
If you launch it from infoview a file will be created on your local computer called something.extranet and this file will contain the web/app connection information for connecting.
When using 2 tier connections will be made from the local computer, this requires middle ware to be set up on the workstation(s). Performance will be faster in 2-tier as a benefit. When using 2-tier only a CMS or clustername will be entered in the system.
Regards,
Tim

VIP (Virtual IP) on a cluster env for BOBJ 3.1 and rich client

All,
I am in 3.1 where I have an installation with 1 cluster and 2 app server machine behind.
in order to load balance between the 2 app server I am using some VIP address using some sticky session.
It works perferctly when i am logging to it thru the infoview However we would like to try the same when trying to login from the rich client.
is it possible ?
thanks in advance
Philippe

If using WRC in 2-tier then it connects to the CMS and directly to the reporting DB (any DB middleware is configured on the client) so the load balancer doesn't even come into play in this scenario. The WRC can be downloaded from infoview or installed by CD.
If using WRC in 3-tier (globe shown in the system). Then it should work fine. 3-tier will need an extranet file which contains connection info so it can use the web/app to forward requests using the servers middleware. The connection server needs to be running to connect to the reporting DB.
To connect in 3-tier verify that you don't have any extranet files in my documents\my business objects documents\locdata on the WRC client. Then open infoview using the URL of your load balancer, and set your webi preferences to use WRC. Select new webi doc (this should create a new extranet file at the above location using the loadbalanced URL. Also needed for this to work are WRC installed (you should be prompted if not) and the connection server running and enabled in the CMC > servers.
Also see [this doc|http://help.sap.com/businessobject/product_guides/boexir31/en/xi3-1_web_intelligence_rich_client_en.pdf]
Regards,
Tim

Whats the difference between Rich Client and Desktop Client? (BO XI 3.2)

Hello,
maybe someone has a matrix oder something like that?
Thanks for helping...
Biegel

There are a number of reasons for using Web Intelligence Rich Client to
work with WID documents:
u2022 You want to work with Web Intelligence documents but you are unable
to connect to a CMS (while traveling, for example).
u2022 You want to improve calculation performance: Web Intelligence Rich
Client performs calculations locally, rather than on the server, and local
calculations can perform better than server calculations.
u2022 You want to work with Web Intelligence documents without installing a
CMS or application server.
Deski
1. VB Macro
2. Slice and Dice functionality
3. Database Ranking is not there
4. Column can be conditionally hidden
5. Free-hand sql, SP can be used as data providers
6. No time out error.
7. Needs to be installed on all the desktop machines
Gracias...!!

Facelets support in ADF Rich Client

I have tried to use ADF Rich Client with Facelets
but it looks like the tag library schema is not recongined, and the ADF RC tag schema definition in html root tag and all ADF RC tags are copied into output.
any comments or info from any one?

hi,
to add my 2 cents
by the way do you know when will be a code drop of ADF RC available in Apache ?
I assume this to happen some time after ADF Faces RC goes production
1) legacy(!?) pages in one of projects we have hundreds of pages developed in facelets and it is a little hard to convert them all.
We don't support JSF 1.1 content (and Trinidad content) to be on the same page as ADF Faces RC. So if you like to continue using your current stack then the option to go with in Trinidad in JDeveloper 11, not ADF Faces RC
3) Templating
ADF Rich Faces Templating mechanism is an strong one, but a little different with Facelets, for example in Facelets templates can be used inside each other but in ADF RC as far I I know they can not.
The runtime does support template nesting, the designtime does. However, as Shay mentioned using daclarative components might be a nice addition to reuse.
4) composition component
in facelets it is easy make a new composite component by mixing existing components
for example add an export to PDF and Excel button to a table.
looks like the current ADF Templating mechanism can be used to solve this issue.
Declarative components do.
Frabj

Umlauts not displayed in WebI Rich Client

Hello everyone,
We have a problem with one user machine using Web Intelligence Rich Client 2-tier mode.
Data umlauts (õäöüšž) are turned to symbols and the query result are incorrect.
It's interesting, because metadata umlauts are displayed correctly. For example, the user sees umlauts header of reports.
The problem have to be in one machine, because when same user log in to another computer then umlauts are displayed correctly.
Environment details:
XI3.1 Edge Professional with DI
Build Number: 601
Product Version: 12.3.0.601
Data Source: DWH
Database Name: Oracle Database 11g Release 11.2.0.1.0 - 64bit ...
Auditing: Enabled
Client details:
Windows 7 32-bit
Oracle client 11g
Rich Client version 12.3.0
NLS_LANG = ESTONIAN_ESTONIA.BLT8MSWIN1257
Do anyone have experience with this kind of problem?
Thanks in advance,
Jana

Hi Jana,
normaly this type of problem happens when the NLS_LANG variable is not set or is incorrectly set.
have a look at this KBA https://service.sap.com/sap/support/notes/1260474
if you can't read it hte resolution is the following
Resolution
Ensure
that the Database is set to UTF8
NLS_LANG
to be set to UTF8 on the database server
If you are
importing the database from another server, make sure that the initial Database
is set to UTF8 too before doing the import/export.
Once this is done proceed as usual to set up Unicode for your
system >>>>Make sure a backup is done before making the
changes<<<<
Installed International Support features Microsoft Office Setup
Modify NLS_LANG on the client machine to be UTF8
(HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\KEY_OracClient10G_home)
Ensure that Unicode parameter in oracle.prm and oracle.sbo files
are set to UTF8 (found in <install directory>\Business Objects\Business
Objects Enterprise 115\win32_x86\DataAccess\ConnectionServer\oracle)
Ensure Unicode parameter in cs.cfg file is set to UTF8 (found in
<install directory>\Business Objects\Business Objects Enterprise
115\win32_x86\DataAccess\ConnectionServer)
In Designer parameter make sure that UNICODE_STRING parameter is
set to Yes
Cheers
Simone

Securit export to CMS Rich client

Similar Messages

Maybe you are looking for