Security and Connectivity procedures (B2B)

Hello All
I would like to know the various security settings in Adapters for A2A and B2B communications. If there is any user guide or document links, then it would be helpful. And what are the different connectivity links needs to be established with the partners for B2B to establish the connection. Any doc or links in this area is also appreciated. Thanks
Ricky

hi
Check out this links, if it serves your purpose
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9133d51d-0b01-0010-438c-dbc41d3d71da
http://help.sap.com/saphelp_nw2004s/helpdata/en/f5/799add57aeee4f889265094a04695c/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/6a/3f93404f673028e10000000a1550b0/content.htm
Thanks & Regards
Harsimran

Similar Messages

Incompatible Security and Connection time out

Ok, since installing leopard, I have not been able to connect to the stronger of my two wireless connections. The weak on, which is WPA connects fine, when I can get a strong enough signal. The second, WEP (I know, people say it's weak, but thats what I have.) But the password I put in, and it is the correct password, keeps saying that it is the wrong password when I do the "assist me" option.
When I just try to connect using the drop down menu on the airport icon, it says "incompatible security" and once in a while, it will say "connection time out".
I did a search, but none of the solutions here have worked. Any help would be greatly appreciated, because as a student I need the wireless connection for homework purposes, and I cant tolerate a weak connection.
Please help
Blake
Message was edited by: blakewt

Hi.
I can't connect to WEP networks either with Leopard 10.5.1.
It just says "incompatible Security". I've tried it for one hour without any luck.
Why doesn't Apple realize that there are millions of WEP encrypted networks out there and that it is essential to be able to connect to them. (it worked with Tiger, didn't it?)
Is there a knowledge base article out there what to do about it?
I just can't walk to hotel managers and ask them to switch to WPA, especially if they don't have a clue how to do that and older windows computers won't be able to connect any more.
Why a transparent menu bar but no way to connect to WEP networks?
I'm very disappointed. Apple, fix this! (now!)
Is there actually a way to get your money back for Leopard if this basic things don't work anymore?
Thank you for any help.

Security and connection string

Hi,
   I am a new developer using ColdFusion.
   Does ColdFusion support Windows Authentication or I have to have my connection string in plain text in my cfm files?
   Can I have connection string in my form or I have in one config file?
   Is it possible to encryp my password and user name in the cfm file?
   Your information and help is great appreciated,
   Regards,
iccsi,

That is a broad question. Are you referring to connections to data sources, or recognizing user IDs for site logins? If the former, you can configure the database logins (with some caveats) within the secure CF Administrator, and never have to pass credentials directly in your CFML code. As for user IDs for logins, if you configure your webserver (IIS) to use Windows Authentication via NTLM, Coldfusion will receive the Windows login and make it acccessible to you via CGI variables.
-Carl V.

I have a 3rd generation iPod Touch and just did the update to IOS 5. Now I can't connect to my Netgear wifi router. My iPhone connects fine along with all of my other laptops etc. I have the router set with WPA-PSK [TKIP] security and an access list.

I have a 3rd generation iPod Touch and just did the update to IOS 5. Now I can't connect to my Netgear wifi router. My iPhone connects fine along with all of my other laptops etc. I have the router set with WPA-PSK [TKIP] security and an access list. I've confirmed the mac address is included on that list and that the password is correct. Under choses netwrok I select the network and it just goes into a spin. I have tried removing the password and the access list settings and it still will not complete the connection to the router thus no internet access. The routers firmware is also up to date. This thing worked fine before this update and I've already tried to restore from backup. Any ideas or is the wifi nic bad in this thing with the new apple firmware update? Any fix?

Thanks Bob, I don't know why but it all of a sudden worked a few days later. It's a mystery but at least problem solved.

System preferences security and privacy is greyed how do i fix it? wifi connection to public not working ether

system preferences's security and privacy are greyed out and it freezes how do i fix it? and when i try to connect to my school wifi it says that is not connected but it is how do i fix that too?

Hello NoraV,
It looks like your Security and Privacy pane is not loading at all, and is making the window unresponsive when you oepn it. I recommend checking your hard drive for errors with the following article:
Disk Utility 12.x: Repair a disk
http://support.apple.com/kb/PH5836
If the issue is not resolved, try performing the steps in this article to boot to Safe Mode, then leave it to retest the issue:
OS X: What is Safe Boot, Safe Mode?
http://support.apple.com/kb/ht1564
Starting up in Safe Mode
To start up into Safe Mode (to Safe Boot), follow these steps.
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key.
The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple logo and the progress indicator (looks like a spinning gear).
After the logo appears, you should see a progress bar during startup. This indicates that your computer is performing a directory check as part of Safe Mode.
To leave Safe Mode, restart your computer without holding any keys during startup.
Thank you for using Apple Support Communities.
All the best,
Sterling

Secure link to iTunes store failed and Connection attempt to firmware update server was unsuccessful

Hello everyone, Im facing error with my iTunes. When I run diagnostics i can see "Secure link to iTunes store failed" - please see the image below
Please note: as it is showing secure link to itunes is failed but still i can see iTunes store, but the above error shows when I run diagnostics.
After that when I go through the next and I found the diagnostics report as below, within report i have marked a line with RED colored "Connection attempt to firmware update server unsuccessful". I need HELP!!!!!
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
Gigabyte Technology Co., Ltd. G31M-ES2C
iTunes 11.3.0.54
QuickTime not available
FairPlay 2.6.12
Apple Application Support 3.0.5
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.1.2.6
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0012B9F0069DE9C0
Current user is an administrator.
The current local date and time is 2014-08-05 01:48:05.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
NVIDIA GeForce 8400 GS
**** External Plug-ins Information ****
No external plug-ins installed.
The drive G: ZTE USB SCSI CD-ROM Rev 2.31 is a USB 2 device.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:    {14DCBC2B-34CB-431B-8625-1E62D7310533}
Description:    WAN (PPP/SLIP) Interface
IP Address:    10.128.133.101
Subnet Mask:    255.255.255.255
Default Gateway:    10.128.133.101
DHCP Enabled:    No
DHCP Server:
Lease Obtained:    Thu Jan 01 06:00:00 1970
Lease Expires:    Thu Jan 01 06:00:00 1970
DNS Servers:    8.8.8.8
        156.154.70.1
Active Connection:    Teletalk
Connected:    Yes
Online:        Yes
Using Modem:    Yes
Using LAN:    No
Using Proxy:    No
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2014-08-04 03:23:27.
**** Device Connectivity Tests ****
iPodService 11.3.0.54 is currently running.
iTunesHelper 11.3.0.54 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.

Hi msahed,
Welcome to Apple Support Communities.
It sounds like there is an issue with your PC establishing a secure connection to the iTunes Store and the firmware update server. Try following along with the articles below, as they should resolve the issues that you described.
iTunes: About the "A secure network connection could not be established" alert
http://support.apple.com/kb/ts1470
iTunes for Windows: iTunes can't contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/TS1814
I hope this helps.
-Jason

Since the most recent Firefox update 3.6.8 by banking institution no longer shows as having a secure encrypted connection, however, my bank assures me all is well with their certificates and that is a problem with the new Firefox browser update, can you g

Since the most recent Firefox update 3.6.8 my banking institution no longer shows as having a secure encrypted connection, however, my bank assures me all is well with their certificates and that is a problem with the new Firefox browser update, can you give me some idea why it is doing this?
== This happened ==
Every time Firefox opened
== Right after the new Firefox update

Hello Anne.
Can you please try it in a new (temporary) Firefox profile and see if the issue is still present? See [http://support.mozilla.com/en-US/kb/Managing+profiles this article] to know how to create a new Firefox profile. Please report back the results.

Problem connecting wirelessly from iMac to NETGEAR router, get invalid password message with WPA and WPA-2 encryption in place but if I remove them, so no security, can connect without a problem. Help!!

Problem connecting wirelessly from iMac to NETGEAR router, get invalid password message with WPA and WPA-2 encryption in place but if I remove them, so no security, can connect without a problem. Help!!

Thank you for your suggestion but I have already had a couple of phone sessions with NETGEAR support and they don't see any problems with the router settings etc. They referred me to Apple support, who helped me discover that it is possible to communicate with the router but only if I turn off the encryption/security software, which I don't want to do. The frustrating thing is that I can connect wirelessly from a laptop running Windows 7 and two Anroid smart phones, with WPA-2 in place, without a problem. Do you have any other ideas?

Need a Secure Reliable connection Using IDSL and dsl routers

I need to get a fast secure remote connection to my database. I am using oracle 8i database and the 6i developer for my applications. I need to connect to from remote sites to my office using my internet dsl router.
I managed to do this using the web remote desktop , but i need to use a differnt method for tow reasons :
1- I am worried that i might face performance problems when having many remote desk top connections.
2- I still need security measures where i want to restrict connections to only specific computers that i have identified by reading hard disks serial numbers etc.
I will appreciate it if any one can help me and show me a suitable way to connect to the data base remotely using the idsl lines while the application (forms and reports runs in the clients computer) or any other methods to connect using the idsl and the routers and not compromise the security issues of restricting the connections based on hardware information.

Hi,
it seems to be a JRE Problem. When I use the Kerberos implementation from "Vintela Single Sign-On for Java" I can establish a "aes256" secured LDAP connection to the AD Server.
This LDAP connection allows to change the passwords of the users stored in the AD.
The problem is that "Vintela Single Sign-On for Java" is not free, so it would be nice to have a solution which works with the Kerberos implementation of the JRE.
The error is the same for "aes128" and "aes256" encryption.
And with Wireshark I can not see any differences in the packets send to the AD and received from the AD.

IPhone stays on Edge even though secure wifi is present and connected

My phone connects to unsecure wifi fine. If I try and connect to a secure network, enter the correct ID, the phone says I'm connected and I get the wireless symbol for about a minuit before it switches back to Edge. Unsecure wifi networks no problem. The same thing happened on three different secure networks - connected and then switched to Edge? Has anyone else experienced this? Is this a software issue with iPhone or am I missing something? We have numerous computers connected via the secure wireless network working fine. Any advice would be appreciated. Thank you.
iPhone

The Solution to the problem that you having is the following:
"Go to" SETTINGS
Wi-Fi
"Arrow over on the network which you are trying to connect"
Forget this Network
"Confirm" Forget Network
"Go back to" Wi-Fi Networks
"Choose the network which you are trying to connect"
*"In the Security box arrow over and choose" WEP hex or ASCII
"Now press" Enter Password
"Now enter your WEP Key etc..."
This should allow you to stay connected to a security protected network.

Hello, as its orientation reinstalled the latest version of iTunes and connect to update my iFone. Done that itunes asked me a backp and continued to install, in the middle of the procedure he detected an unknown error (2003) I am now with my iFone withou

Hello Vinay, as its orientation reinstalled the latest version of iTunes and connect to update my iFone. Done that itunes asked me a backp and continued to install, in the middle of the procedure he detected an unknown error (2003) I am now with my iFone without starting only on screen showing the itunes iconwith a usb cable. Please have a solution for a lot of informationand photo to save it. Already agradço your cooperation.

ive also uninstalled itunes and re-installed still dosent detect my fone when it does its takes ages to connect, the my laptop freezes and cant get out of itunes

Securing file download with standard web security and ssl

Hi,
I want to put some files for download in my webapp. At the same time, I want to protect these files using standard servlet security and ssl. So I added <security-constraint> in my web.xml and configured tomcat to allow SSL connection. Now I got the files protected as I expected. When I try to access the file directly from browser, tomcat shows me the login page. However, after correct login, I.E. pops up an error saying something like "Internet Explorer cannot download XXX from XXX. The file could not be written to the cache.". The log file showed the following exception:
javax.net.ssl.SSLException: Connection has been shutdown: javax.net.ssl.SSLException: java.net.SocketException: Connection reset by peer: socket write error
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.checkEOF(SSLSocketImpl.java:1154)
     at com.sun.net.ssl.internal.ssl.AppInputStream.available(AppInputStream.java:40)
     at org.apache.tomcat.util.net.TcpConnection.shutdownInput(TcpConnection.java:90)
     at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:752)
     at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:526)
     at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
     at java.lang.Thread.run(Thread.java:595)
Caused by: javax.net.ssl.SSLException: java.net.SocketException: Connection reset by peer: socket write error
     at com.sun.net.ssl.internal.ssl.Alerts.getSSLException(Alerts.java:166)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.fatal(SSLSocketImpl.java:1476)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.fatal(SSLSocketImpl.java:1443)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.handleException(SSLSocketImpl.java:1407)
     at com.sun.net.ssl.internal.ssl.AppOutputStream.write(AppOutputStream.java:64)
     at org.apache.coyote.http11.InternalOutputBuffer.realWriteBytes(InternalOutputBuffer.java:747)
     at org.apache.tomcat.util.buf.ByteChunk.flushBuffer(ByteChunk.java:403)
     at org.apache.coyote.http11.InternalOutputBuffer.endRequest(InternalOutputBuffer.java:400)
     at org.apache.coyote.http11.Http11Processor.action(Http11Processor.java:961)
     at org.apache.coyote.Response.action(Response.java:182)
     at org.apache.coyote.Response.finish(Response.java:304)
     at org.apache.catalina.connector.OutputBuffer.close(OutputBuffer.java:281)
     at org.apache.catalina.connector.Response.finishResponse(Response.java:473)
     at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:151)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:825)
     at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:738)
     ... 4 more
Caused by: java.net.SocketException: Connection reset by peer: socket write error
     at java.net.SocketOutputStream.socketWrite0(Native Method)
     at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:92)
     at java.net.SocketOutputStream.write(SocketOutputStream.java:136)
     at com.sun.net.ssl.internal.ssl.OutputRecord.writeBuffer(OutputRecord.java:283)
     at com.sun.net.ssl.internal.ssl.OutputRecord.write(OutputRecord.java:272)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.writeRecord(SSLSocketImpl.java:663)
     at com.sun.net.ssl.internal.ssl.AppOutputStream.write(AppOutputStream.java:59)
     ... 15 more
I've tried separating concerns, for example protect files but not require SSL, and enable SSL but do not protect files. Both works respectively but not together. I also tried using a download4j's DownloadServlet. Still doesn't work.
Have any of you encouter the same situation? If so, could you enlight me what I did wrong? It maybe just a simple SSL configuration or something. Thanks in advance!
Jack

My environment setup is:
JDK 1.5.01
Tomcat 5.5.7
For downloading files, I just use plain old <a href> method. I simply right-click the link and choose "save target as...".
Thanks,
Jack

Any ideas for security and parental control software yet???

Just received two of the touchpads from the fire sale and gave them to my kids, both under 10. I am very interested in limiting the sites that can be accessed through the browser, as well as a few other things. Has anyone found a practical means of doing this? I'd hate to give up on this and switch it over to Android, especially since there is only Gingerbread available. But, I just don't know what else I can do about these. Any ideas?
Thanks!
Post relates to: HP TouchPad (WiFi)

Please take this post with a grain of salt. I don't claim to be a security and parental control software expert, but I have researched these solutions and have some personal experience with them. That being said, here's some ideas to get you started.
As speedtouch mentioned, OpenDNS is a fantastic solution for website filtering. They have a great set of filters that can be customized and are one of the easiest systems to set up. Simply install an updater app on one of your desktop computers (or directly on your router if it's supported), configure your router to use their DNS servers, and you're good to go. I personally use this system mysefl and it works really well. The only downside in my experience is that there is not a temporary override system (at least, not in the free version that I use). An example of when this might be handy: my wife goes clothes shopping and looking at new bras. Every once in a while, a perfectly legitimate site might get blocked (in this case, probably something I don't want my kid looking at but perfectly fine for my wife). The option to "temporarily override the block" or "temporarily allow" the site would be nice, but it doesn't exist.
Another FANTASTIC solution that I've used in the past is the Astaro Security Gateway. They have a free home version of their "Software Appliance" that goes above and beyond OpenDNS. I haven't used it in a while, but when I did it was able to not only filter web sites but also monitor Instant Messaging and other online activites. It's a bit more involved as you need your own hardware (I used an old computer with 2 network cards and stuck it in between my router and my broadband modem), but the results are pretty powerful.
The downside to all these solutions, however, is that they will only work when the TouchPad is on your network. If they connect to a neighbors network of if the go to a friends house, all of these systems will be moot because they are completely bypassed. The only way to monitor that content from ANY network would be to install an application on the device itself and to my knowledge, none exist.

SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has be

Hello, I have a sql 2005 server, and I am a developer, with the database on my own machine. It alwayws works for me but after some minutes the other developer cant work in the application
He got this error
Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: 192.168.1.140]
and When I see the log event after that error, it comes with another error.
SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. [CLIENT: 192.168.1.140]
He has IIS5 and me too.
I created a user on the domain called ASPSYS with password, then in the IIS on anonymous authentication I put that user with that password, and it works, on both machines.
and in the connection string I have.
<add key="sqlconn" value="Data Source=ESTACION15;Initial Catalog=GescomDefinitiva;Integrated Security=SSPI; Trusted_Connection=true"/>
I go to the profiler, and I see that when he browses a page, the database is accesed with user ASPSYS, but when I browse a page, the database is accesed with user SE\levalencia.
Thats strange.
The only way that the other developer can work again on the project is to restart the whole machine. He has windows xp profession, I have windows 2000.
If you want me to send logs please tellme

Well here's my problem, maybe you can help. Intermittenly I get a login failed when connecting to a db engine through Server Management Studio using Windows authentication. When this happens the following entries are generated on the server's application event log:
Event Type:        Error
Event Source:    MSSQLSERVER
Event Category:                (4)
Event ID:              17806
Date:                     1/14/2009
Time:                     10:41:31 AM
User:                     N/A
Computer:          <server name>
Description:
SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. [CLIENT: <ip address>]
Event Type:        Failure Audit
Event Source:    MSSQLSERVER
Event Category:                (4)
Event ID:              18452
Date:                     1/14/2009
Time:                     10:41:31 AM
User:                     N/A
Computer:          <server name>
Description:
Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: <ip address>]
I've already ensured that the server is set to mixed authentication mode. Oddly enough, the workaround that I've found is that if I remote desktop into the server, log in and then log back out, Management Studio is suddenly able to connect again. No idea why it works.
As I said before, it is intermitten. Some days it errors on login, other days it doesn't and there are no configuration changes between them. Also, both client and server are in the same domain and same site so there is no VPN or anything in between. I'm really quite stumped. Any help would be great, or if you can point me in the right direction of where to look. Thank you in advance!

When I connect my apple tv to my access point upstair and connect my ipad to the same access point i cant see my apple tv when i open up the airplay menu on my ipad. but i can see the apple tv in the living room downstair which connect to the main router

when I connect my apple tv to my access point upstair and connect my ipad to the same access point i cant see my apple tv when i open up the airplay menu on my ipad. but i can see the apple tv in the living room downstair which connect to the main router.
Below is some info i get about ports.
I tried to set DMZ on my main router to have full access to ported to access point upstair which is in the ip of 192.168.1.2 and the main router in the living room is the gateway router with the 192.168.1.1 ip.
I still cant see apple tv after i try the DMZ method.
any suggestion ?
These network ports are used by Apple TV for communications on your network.
TCP port 123 is used to communicate with a network time server.
TCP port 3689 is used to communicate with iTunes while using the iTunes Library Sharing feature.
UDP port 5353 is used by Apple TV for automatically finding computers with iTunes on your network using Bonjour.
TCP port 80 is used for communicating with podcast servers.
TCP port 80 and 443 are used for basic and secure communications with the iTunes Store via the Internet.
TCP port 53 is used for regular DNS.
These are well-known ports used by Apple products, like iTunes. If you can use all the features of iTunes, these ports are likely already open on your firewall or NAT router. Note: These ports may also used by other services such as YouTube and Flickr.

When the Apple TV is paired with a remote, it means only that remote can control it, when it's not paired any remote can control it. You will need a remote for each of your devices.

Security and Connectivity procedures (B2B)

Similar Messages

Maybe you are looking for