Security and roles while upgrading to bi7

hi
Guys i ha ve question about upgrade
what will happens to security and roles while upgrading from bi3.5 to 7 ?
is this can be migrated into bi7 from bw 3,5 , if so how ?
or do we need to create separate again in Bi7 ?
u r answer will be much apreaciated

Hi,
this can be upgraded but it is not a must. SAP recomend to use the new concept provided by NW 7.0...
You can switch on/off obsolete Authorization concept with RSCUSTV23. For security and clarity reasons make a u201Ecleanu201C new setup u201Efrom the scratchu201C (much easier, less complex than in 3.x)...
Check this upgrade guide it will give you all informations:
[SAP NetWeaver 7.0 BI Upgrade Specifics|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10564d5c-cf00-2a10-7b87-c94e38267742]
New BI Authorizations set in SPRO (maintenance in RSECADMIN)
- During technical upgrade, and if you used an authorization concept in BW3.x
switch back to u201Cobsolete Concept with RSR Authorization Objects)u201D
- Important: After technical upgrade switch back to the new Concept and see
note 820183 and 923176 New BI Authorizations set in SPRO (maintenance in RSECADMIN)
- During technical upgrade, and if you used an authorization concept in BW3.x
switch back to u201Cobsolete Concept with RSR Authorization Objects)u201D
- Important: After technical upgrade switch back to the new Concept and see
note 820183 and 923176
Other links/notes which could be helpful:
Note 923176 - Support situation authorization management BI70/NW7.0
New Analysis Authorizations for BI Reporting:
http://help.sap.com/saphelp_nw04s/helpdata/en/80/d71042f664e22ce10000000a1550b0/
content.htm
Regards
Andreas

Similar Messages

Security and roles in Nakisa TVN

When a Nakisa role is mapped to an SAP role, does it limit the data that the person who is running that role sees? For example, if an employee logs in and is assigned a "Employee" role, is it possible to limit the org chart that the employee sees to only his org unit and below?

Hi there,
This depends on which architecture you are using, Live or Staged. In Live OrgChart uses SAP structural authorizations and therefore the user only sees what data they can see in SAP. In the Staged version you have to build roles and map SAP roles to them. In STVN2.1 OrgChart there are 5 pre-configured security roles available out of the box, which do include a "derives and below" security role ("Derives and Below" allows a user to see information about objects in the structure below them).
It is possible through configuration to allow a logged-in user to start at their location in the structure and also to prevent them from navigating up the structure. This configuration can be very complex and requires full knowledge of configuration of authentication as well as authorisation (ie roles) in order to achieve what you want. It is also possible to limit data fields and fields in the search etc through less complex configuration and if you're really clever you can customise the application in order to do things based on particular roles (like display a pop-up message at login etc). However, that takes a thorough knowledge of how the application works to achieve and only few consultants outside of Nakisa and provide that level of customisation.
I hope that helps.
Luke

How does my role as a SAP SECURITY ADMIN dfiffre frm upgrade n implementati

hi Gurus ,
i am new to this Security i just want to know how does my role as a security admin differ ..in a implementation project and in a upgrade project ........pls answer this ..............n can i get any doc abt the tables n the objects .............related to security ....................... any links or docs u can mail me at [email protected]
thank you

A few inputs from my end....
Implementation --> starting from role naming conventions to role design,sod conflicts, master child relations and documentation.
Upgrade --> If from 4.0 versions to higher versions then its something similar where we convert profiles to Roles and then redesign them to SOD conflicts..
But in case of higher upgrades then the java component access and the segregation of duties for these components as well have to be considered...
Hope it helps...
Vbr,
Sri
Award points for helpful answers

After upgrading to Mountain Lion I am not able to access "security and privacy" button under "system preferences". I like to activate "find my mac" but cannot access privacy setting after upgrade. Kindly advice.

After upgrading to Mountain Lion I am not able to access "security and privacy" button under "system preferences". I like to activate "find my mac" but cannot access privacy setting after upgrade. Kindly advice.

HT1267 While upgrading my iPhone 3 to 4.2 something went wrong and would not start at all. When tried to restore after going through th process it comes up with the message "The iPhone could not be restored. An unknown error occurred [1015]." What can I d

While upgrading my iPhone 3GS to iOS 4.2 something went wrong and came up with the message "The iPhone could not be restored. An unknown error occurred [1015]." Now it will not start at all. It just stays on screen with USB and the iTune picture. What can I do to get it going again. I only tried to upgrade because I was prompted to up-grade and now I am helpless. I did a backup before starting the upgrade. The error message did not tell what to do next. Any help is very much appreciated.

Usually that means the iPhone was hacked to unlock it from the original
carrier .
Updating the operating system locks it back to that original carrier
You could try this
http://support.apple.com/kb/TS3281
However if the iPhone was hacked it is probably a paper weight now
and as this is an Apple hosted forum you can get no further help here

HT4527 While upgrading my operating system to Windows 7, I backed up everything on external drive. However the drive is corrupt and lost my music. Since I have an iPhone I had the music there as well, I synced it and it erased everything. How can I get

While upgrading to Windows 7, I backed up everything on a external drive; it became corrupt so I could not access my music library for iTunes. However, I had my music on my iPhone as well so I assumed it will sync. It did sync but not the way I thought, so I lost years of music and favorite uploaded CDs. How can I recover it? I lknow you can acess iTunes from 4 computers so the database is there somewhere. Unfortunately all I was able to recover is the music purchased from iTunes directly. It makes me wonder about the iCloud product; if I cannot find my music what is my incentive to buy iCloud? It seems like they are starting to charge for something that they provided before freely, then messed up the updates and software so that we need to pay for this service now.

iCloud never stored music. That is what the iTunes Match service is for.
The only way to get back non-iTunes-purchased music is to import them to your new iTunes library however you did it on your old computer.

Display as Key and Name Not working properly after upgrade to Bi7.0

Hi Bw Guru's
Recently we have upgrade our BW 3.5 system to BI 7.0 (Only system upgrade not applications ).
after the upgrade we are facing lot of issues with Bex Analyzer. The following are some of the issues
1) In BW3.5 after the execution of Workbook or query ,we can convert to local currency .
Right click on workbook -> Currency translation-> Database currency .
but after upgrade to BI7.0 this is not working ..
2) Characterstic Right click on workbook Dispaly as Key and Name is also not working ..
I know that Currency translation in BI7.0 works in different way compare to BW3.5 .we can use alternate option like By Target Currency from Database currency to convert to local currency and it is working fine in Bex,but businesss users want more friendly way ...because to select the above option they have to enter local currency and rate type ...
Do you we have any notes available for the above solutions ..?Do we need to upgrade Bex version also..?Is there any document which describe how the above things works after system upgraded to BI7.0?
Please suggest me..
Thanks in advance
Shu Moh.

Dear Harita
The first issue Currency translation in query or workbook is solved with SAP note 1119549.For second issue we have not found solution until now ,Once we find the solution we will update you..
Shu Moh

Been using an ipad 2 without passcode for quite some time. While upgrading to ios 7, I enabled Find Iphone on the Ipad. It asked for passcode and I gave one. Now I forgot it.

Been using an ipad 2 without passcode for quite some time. While upgrading to ios 7, I enabled Find Iphone on the Ipad. It asked for passcode and I gave one. Now I forgot it. Connected it iTunes (on my windows 8 system) with which I sync and that too required an update as old version of itunes cannot read ios7. Problem is itunes does not want to get updated. Some vague error on not having right to write a file in ProgramData folder wheras as an admin i have full rights. Next I downloaded the install file from itunes site - no luck it would not install. Then I tried to remove itunes - it does not want to go. Am at wits end... Is the option only to restore it as a new Ipad?

Place the iPhone into recovery mode and restore the iPhone with iTunes on your computer.
http://support.apple.com/kb/HT1808

Can i ulter my COA, calendar and Multi Org structure while upgrading

Hi All,
I am working on a upgrade project and i have a querry on my client requirement...
1. Can we alter COA structure while upgrading like adding OR deleting segments to the existing structure
2. Can i change my calendar type and number of periods
3. can i re organize my multiorg structure like adding or merging LE, OU and INV
Could you please share me your thoughts..
Thanks in advance...

seen the exact same question answered in the below link .....
http://www.erpstuff.com/forums/topic.asp?TOPIC_ID=9946
Regards,
Ivruksha

I have an iPhone 4S and while upgrading to OS 8.3, I noticed that all my contacts are gone. Can I connect to my iMac OS Yosemite 10.10.3 and transfer contacts directly onto my phone?

I have an iPhone 4S and while upgrading to OS 8.3, I noticed that all my contacts are gone. Can I connect to my iMac OS Yosemite 10.10.3 and transfer contacts directly onto my phone?

Hey there denise.ca,
I see that you have a question about one of the functions of USB syncing. To answer your question, yes, you can sync contacts from your computer to your iPhone using USB syncing and iTunes:
Info: Sync your contacts and calendars.
Sync your iPhone, iPad, and iPod with iTunes using USB - Apple Support
https://support.apple.com/en-us/HT201253
Thanks for using the Apple Support Communities!
Cheers,
Braden

Where did the securables go? Created Databse Role add Securables and Permission but it disappeared.

Hello my friends:
Create a Database Role, added Securables and set the Permissions. These are all stored Procedures.
When I clicked Okay I get a message that the role was created successfully.
Now I go back to the database role, click properties and the securables are not showing?
Is this normal behavior? Where did they go?
Thanks!

I have sufficient rights: The DB Role is working because Users who I have assigned the Role Are able to do what they need. I just cannot see the securables when I go to properties. I also have a SYS Admin account, I log in as SYS Admin and still cannot see
the securables.
However, if I click on an individual user who is assigned to the role, I can see the securables from the properties tab.
Hi,
First check that you can see the role using a query:
USE AdventureWorks2012;
GO
CREATE ROLE ArielyRole322
GO
Select * from sys.database_principals where name = 'ArielyRole322' and type = 'R'
GO
and now you can use the GUI interface as well:
open the database -> security -> Roles -> Database Roles -> and here it is :-)
Ronen Ariely
[Personal Site] [Blog] [Facebook]

We have upgraded to BI7 and When I am trying to save a query as workbook

Hi,
we have upgraded to BI7 and When I am trying to save a query as workbook and open it is opening but a junk data is getting displayed in the excel workbook.The excel version is 2007.
But when I tried the same with excel version 03 it is opening fine with valid data.
Pl help.
Thanks in adavance,

Thanks Bernd: I am using Adobe Acrobat 10 Pro. I did get a response from Dave Marchant which directed me how to find the layers icon and I found the options icon as suggested in Adobe Help. However, the options do not allow me to choose an option of either merging layers or flattening layers. I am a novice at this and am trying to get this 1-page pdf graphic to convert to a Word document. Is it possible that I already have a single layer pdf and that Word is doing something weird during the conversion? I tried to convert the document yesterday and I ended up with two pages in Word. One page had the text boxes and one had the river channels on which the text boxes had been inserted. This is not a document I created. We have been struggling for 5 years at various times to get this one page document into Word so that it can be used in multiple reports. Even the graphics departments at a couple of companies have not been able to get this document resized from the original 11 x 17 format into 8.5 x 11. I managed to get that done yesterday. But now can't get a useable version into Word. Suggestions?

Ora-00001 error occured while upgrading 10.2.0.4 to 11.2.0.3

Hi all,
I am facing 'ora-00001: Unique constraint(SYSMAN.MGMT_PRIV_GRANTS_PK) violated' while upgrading 10.2.0.4 database to 11.2.0.3 using DBUA. Need urgent help in resolving this.
Thanks
Sandeep

Hi srini,
Yes, all the actions required by pre-upgrade tool are performed.
In our case dbua related logs are present in $ORACLE_BASE/cfgtoollogs/dbua/logs folder.
Files under this folder are:
1.) sqls.log 2.) trace.log
Last 100 lines from trace.log file
[Thread-52] [ 2012-10-24 13:59:01.749 GMT+05:30 ] [Util.<init>:95] Util Instance created.
[Thread-52] [ 2012-10-24 13:59:01.762 GMT+05:30 ] [OracleHome.getVersion:889] OracleHome.getVersion called. Current Version: null
[Thread-52] [ 2012-10-24 13:59:01.768 GMT+05:30 ] [InventoryUtil.getOUIInvSession:347] setting OUI READ level to ACCESSLEVEL_READ_LOCKLESS
[Thread-52] [ 2012-10-24 13:59:01.769 GMT+05:30 ] [OracleHome.getVersion:908] Homeinfo /nhi2/app/oracle11g/product/11.2.0/dbhome_1,7
[Finalizer thread] [ 2012-10-24 13:59:01.822 GMT+05:30 ] [Util.finalize:126] Util: finalized called for oracle.ops.mgmt.has.Util@a360a36
[Finalizer thread] [ 2012-10-24 13:59:01.822 GMT+05:30 ] [Util.finalize:126] Util: finalized called for oracle.ops.mgmt.has.Util@1700170
[Thread-52] [ 2012-10-24 13:59:01.960 GMT+05:30 ] [OracleHome.getVersion:936] OracleHome.server.getVersion Version: 11.2.0.3.0
[Thread-52] [ 2012-10-24 13:59:01.960 GMT+05:30 ] [OracleHome.getVersion:957] Current Version From Inventory: 11.2.0.3.0
[Thread-52] [ 2012-10-24 13:59:01.960 GMT+05:30 ] [OracleHome.getVersion:889] OracleHome.getVersion called. Current Version: 11.2.0.3.0
[Thread-52] [ 2012-10-24 13:59:01.961 GMT+05:30 ] [OracleHome.getVersion:957] Current Version From Inventory: 11.2.0.3.0
[Thread-52] [ 2012-10-24 13:59:01.961 GMT+05:30 ] [CommonUtils.createPasswordFile:604] calling new orapwd for 11.1 or higher
[Thread-52] [ 2012-10-24 13:59:01.963 GMT+05:30 ] [OsUtilsBase.execProg:2183] beginning execProg with input array.
[Thread-52] [ 2012-10-24 13:59:02.046 GMT+05:30 ] [OsUtilsBase.execProg:2220] finished execProg with input array. Status:0
[Thread-52] [ 2012-10-24 13:59:02.046 GMT+05:30 ] [OracleHome.initOptions:1236] Initializing Database Options with for dummy sid=DBUA5901749 using initfile=/nhi2/app/oracle11g/product/11.2.0/dbhome_1/dbs/initDBUA5901749.ora using pwdfile=/nhi2/app/oracle11g/product/11.2.0/dbhome_1/dbs/orapwDBUA5901749
[Thread-52] [ 2012-10-24 13:59:02.047 GMT+05:30 ] [OracleHome.getVersion:889] OracleHome.getVersion called. Current Version: 11.2.0.3.0
[Thread-52] [ 2012-10-24 13:59:02.047 GMT+05:30 ] [OracleHome.getVersion:957] Current Version From Inventory: 11.2.0.3.0
[Thread-52] [ 2012-10-24 13:59:02.047 GMT+05:30 ] [OracleHome.getVersion:889] OracleHome.getVersion called. Current Version: 11.2.0.3.0
[Thread-52] [ 2012-10-24 13:59:02.047 GMT+05:30 ] [OracleHome.getVersion:957] Current Version From Inventory: 11.2.0.3.0
[Thread-52] [ 2012-10-24 13:59:02.047 GMT+05:30 ] [OracleHome.getVersion:889] OracleHome.getVersion called. Current Version: 11.2.0.3.0
[Thread-52] [ 2012-10-24 13:59:02.048 GMT+05:30 ] [OracleHome.getVersion:957] Current Version From Inventory: 11.2.0.3.0
[Thread-52] [ 2012-10-24 13:59:02.048 GMT+05:30 ] [SQLPlusEngine.getCmmdParams:222] m_home 11.2.0.3.0
[Thread-52] [ 2012-10-24 13:59:02.048 GMT+05:30 ] [SQLPlusEngine.getCmmdParams:223] version > 112 true
[Thread-52] [ 2012-10-24 13:59:02.048 GMT+05:30 ] [SQLEngine.getEnvParams:555] Default NLS_LANG: AMERICAN_AMERICA.AL32UTF8
[Thread-52] [ 2012-10-24 13:59:02.049 GMT+05:30 ] [SQLEngine.getEnvParams:565] NLS_LANG: AMERICAN_AMERICA.AL32UTF8
[Thread-52] [ 2012-10-24 13:59:02.049 GMT+05:30 ] [SQLEngine.initialize:325] Execing SQLPLUS/SVRMGR process...
[Thread-52] [ 2012-10-24 13:59:02.087 GMT+05:30 ] [SQLEngine.initialize:362] m_bReaderStarted: false
[Thread-52] [ 2012-10-24 13:59:02.090 GMT+05:30 ] [SQLEngine.initialize:366] Starting Reader Thread...
[Thread-52] [ 2012-10-24 13:59:02.227 GMT+05:30 ] [OracleHome.initOptions:1248] executing: startup nomount pfile='/nhi2/app/oracle11g/product/11.2.0/dbhome_1/dbs/initDBUA5901749.ora'
[Thread-52] [ 2012-10-24 13:59:29.944 GMT+05:30 ] [OracleHome.initOptions:1259] executing: select parameter from v$option where value='TRUE'
[Thread-52] [ 2012-10-24 13:59:29.966 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Partitioning is ON
[Thread-52] [ 2012-10-24 13:59:29.967 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Objects is ON
[Thread-52] [ 2012-10-24 13:59:29.967 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Advanced replication is ON
[Thread-52] [ 2012-10-24 13:59:29.967 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Bit-mapped indexes is ON
[Thread-52] [ 2012-10-24 13:59:29.967 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Connection multiplexing is ON
[Thread-52] [ 2012-10-24 13:59:29.967 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Connection pooling is ON
[Thread-52] [ 2012-10-24 13:59:29.967 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Database queuing is ON
[Thread-52] [ 2012-10-24 13:59:29.968 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Incremental backup and recovery is ON
[Thread-52] [ 2012-10-24 13:59:29.968 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Instead-of triggers is ON
[Thread-52] [ 2012-10-24 13:59:29.968 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Parallel backup and recovery is ON
[Thread-52] [ 2012-10-24 13:59:29.968 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Parallel execution is ON
[Thread-52] [ 2012-10-24 13:59:29.968 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Parallel load is ON
[Thread-52] [ 2012-10-24 13:59:29.968 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Point-in-time tablespace recovery is ON
[Thread-52] [ 2012-10-24 13:59:29.969 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Fine-grained access control is ON
[Thread-52] [ 2012-10-24 13:59:29.969 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Proxy authentication/authorization is ON
[Thread-52] [ 2012-10-24 13:59:29.969 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Change Data Capture is ON
[Thread-52] [ 2012-10-24 13:59:29.969 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Plan Stability is ON
[Thread-52] [ 2012-10-24 13:59:29.969 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Online Index Build is ON
[Thread-52] [ 2012-10-24 13:59:29.972 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Coalesce Index is ON
[Thread-52] [ 2012-10-24 13:59:29.972 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Managed Standby is ON
[Thread-52] [ 2012-10-24 13:59:29.972 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Materialized view rewrite is ON
[Thread-52] [ 2012-10-24 13:59:29.973 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Database resource manager is ON
[Thread-52] [ 2012-10-24 13:59:29.973 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Spatial is ON
[Thread-52] [ 2012-10-24 13:59:29.973 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Export transportable tablespaces is ON
[Thread-52] [ 2012-10-24 13:59:29.973 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Transparent Application Failover is ON
[Thread-52] [ 2012-10-24 13:59:29.973 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Fast-Start Fault Recovery is ON
[Thread-52] [ 2012-10-24 13:59:29.974 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Sample Scan is ON
[Thread-52] [ 2012-10-24 13:59:29.974 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Duplexed backups is ON
[Thread-52] [ 2012-10-24 13:59:29.974 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Java is ON
[Thread-52] [ 2012-10-24 13:59:29.974 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option OLAP Window Functions is ON
[Thread-52] [ 2012-10-24 13:59:29.974 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Block Media Recovery is ON
[Thread-52] [ 2012-10-24 13:59:29.974 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Fine-grained Auditing is ON
[Thread-52] [ 2012-10-24 13:59:29.975 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Application Role is ON
[Thread-52] [ 2012-10-24 13:59:29.975 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Enterprise User Security is ON
[Thread-52] [ 2012-10-24 13:59:29.975 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Oracle Data Guard is ON
[Thread-52] [ 2012-10-24 13:59:29.975 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option OLAP is ON
[Thread-52] [ 2012-10-24 13:59:29.975 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Basic Compression is ON
[Thread-52] [ 2012-10-24 13:59:29.976 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Join index is ON
[Thread-52] [ 2012-10-24 13:59:29.976 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Trial Recovery is ON
[Thread-52] [ 2012-10-24 13:59:29.976 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Data Mining is ON
[Thread-52] [ 2012-10-24 13:59:29.976 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Online Redefinition is ON
[Thread-52] [ 2012-10-24 13:59:29.976 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Streams Capture is ON
[Thread-52] [ 2012-10-24 13:59:29.977 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option File Mapping is ON
[Thread-52] [ 2012-10-24 13:59:29.977 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Block Change Tracking is ON
[Thread-52] [ 2012-10-24 13:59:29.977 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Flashback Table is ON
[Thread-52] [ 2012-10-24 13:59:29.977 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Flashback Database is ON
[Thread-52] [ 2012-10-24 13:59:29.977 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Transparent Data Encryption is ON
[Thread-52] [ 2012-10-24 13:59:29.978 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Backup Encryption is ON
[Thread-52] [ 2012-10-24 13:59:29.978 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Unused Block Compression is ON
[Thread-52] [ 2012-10-24 13:59:29.978 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Result Cache is ON
[Thread-52] [ 2012-10-24 13:59:29.978 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option SQL Plan Management is ON
[Thread-52] [ 2012-10-24 13:59:29.978 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option SecureFiles Encryption is ON
[Thread-52] [ 2012-10-24 13:59:29.979 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Real Application Testing is ON
[Thread-52] [ 2012-10-24 13:59:29.979 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Flashback Data Archive is ON
[Thread-52] [ 2012-10-24 13:59:29.979 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option DICOM is ON
[Thread-52] [ 2012-10-24 13:59:29.992 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Active Data Guard is ON
[Thread-52] [ 2012-10-24 13:59:29.992 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Server Flash Cache is ON
[Thread-52] [ 2012-10-24 13:59:29.992 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Advanced Compression is ON
[Thread-52] [ 2012-10-24 13:59:29.992 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option XStream is ON
[Thread-52] [ 2012-10-24 13:59:29.993 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Deferred Segment Creation is ON
[Thread-52] [ 2012-10-24 13:59:29.993 GMT+05:30 ] [OracleHome.initOptions:1269] executing: select version from v$timezone_file
[Thread-52] [ 2012-10-24 13:59:29.997 GMT+05:30 ] [OracleHome.initOptions:1275] Timezone file version is 14
[Thread-52] [ 2012-10-24 13:59:31.019 GMT+05:30 ] [SQLEngine.done:2189] Done called
[Thread-52] [ 2012-10-24 13:59:31.020 GMT+05:30 ] [OsUtilsBase.deleteFile:1863] OsUtilsBase.deleteFile: /nhi2/app/oracle11g/product/11.2.0/dbhome_1/dbs/initDBUA5901749.ora
[Thread-52] [ 2012-10-24 13:59:31.034 GMT+05:30 ] [OsUtilsBase.deleteFile:1863] OsUtilsBase.deleteFile: /nhi2/app/oracle11g/product/11.2.0/dbhome_1/dbs/orapwDBUA5901749
[Thread-52] [ 2012-10-24 13:59:31.042 GMT+05:30 ] [OracleHome.initOptions:1316] Diag cleanup /nhi2/app/oracle11g/product/11.2.0/dbhome_1/log/diag/rdbms/dbua5901749
[Thread-52] [ 2012-10-24 13:59:31.564 GMT+05:30 ] [OracleHome.initOptions:1324] Database Options queried: 60
[Thread-52] [ 2012-10-24 13:59:31.564 GMT+05:30 ] [CompManager.setLoggingDirForDB:6992] Create logging folder for database=baan
[Thread-52] [ 2012-10-24 13:59:31.565 GMT+05:30 ] [CompManager.createUniqueDirs:6953] create createUniqueDirs logging folder=/nhi2/app/oracle11g/cfgtoollogs/dbua/baan/upgrade
[Thread-52] [ 2012-10-24 13:59:31.566 GMT+05:30 ] [CompManager.createUniqueDirs:6965] create createUniqueDirs logging folder=/nhi2/app/oracle11g/cfgtoollogs/dbua/baan/upgrade1
[Thread-52] [ 2012-10-24 13:59:31.574 GMT+05:30 ] [CompManager.createUniqueDirs:6973] create SUCCESS for folder=/nhi2/app/oracle11g/cfgtoollogs/dbua/baan/upgrade1
Thanks,
Sandeep Vadlamudi

Challenges while Upgrading from OBIEE 10g to 11g

Hi Gurus,
This is Kiran again. This time I am back with the upgradation issues. We have a client which is currently on OBIEE 10g. All components are already configured in OBIEE 10g with client on RPD, Catalog and implemented all security levels for those.
Now the challenge is to upgrade all activities which we have configured in OBIEE 10g. I have seen lot of stuff online and understood how to upgrade from OBIEE 10g to OBIEE 11g by simply clicking on ua.bat file. But I am unable to understand the process how it is upgrading the securities and environments.
Can anyone help me out by providing necessary stuff I need to take care of before taking the decision to upgrade from OBIEE 10g to 11g.
And also please clear me whether we will have any challenges in upgrading process. If yes, then what kind of challenges we will face and what kind of necessary steps we need to implement to resolve it.
What kind of Architecture we need to follow?
How Schedulers will get upgraded?
Please help me out with your real experiences (Not the online websites). Your response will be highly appreciated and it will help lot of OBIEE professionals who are in the process of upgradation.
Thanks in Advance to all OBIEE GURUS.
Kiran

Hi Valli,
There is really great information available in this link. But I would like to know whether any one faced any issues while upgrading from OBIEE 10g to 11g. Please do share us few issues....
Edited by: 949144 on Nov 27, 2012 9:44 AM

Error while upgrading OBIEE10g RPD to 11g Cannot release MBean - not locked

Hi,, I have successfully installed OBIEE 11g and now truing to upgrade 10g RPD to 11g RPD using Upgrade Assistant. The process gets failed with following error in the LOG file;
*[2013-02-19T00:54:53.367+05:30] [bi] [NOTIFICATION] [oracle.bi.security] Adding member 'REPORTING_USER' to role 'REPORTING_USER'*
[Comment] The above line is last line without any WARNING or ERROR, the WARNING and ERROR starts brom next line (below)
*[2013-02-19T00:56:55.375+05:30] [BIEE] [WARNING] [upgrade.BIEE] Cannot release MBean - not locked*
*[2013-02-19T00:56:55.376+05:30] [BIEE] [ERROR] [upgrade.BIEE] javax.management.OperationsException: WARNING: Element Type: DOMAIN[[*
Element Id: null
Operation Result: FAILED_TO_APPLY_CHANGES
Detail Message: Timeout; Waiting for all managed servers to push configuration changes; [120 secs]; AdminServer
Please help.
Edited by: 923934 on Feb 25, 2013 2:41 AM

while upgrading the RPD make sure that user weblogic server must be up and running including the all the BI Services.
first look into these servers and run the upgrade utility.
let me know is there any issues.
Regards,
Yogi.

Security and roles while upgrading to bi7

Similar Messages

Maybe you are looking for