Security API failed with error 60008

HI, I have been tryng to wrap some files (or something like that) but when I select the files it comes up with an error box saying "security API failed with error 60008" can anyone help me fix this or tell me what it is?

Launch Disk Utility and run Repair Permissions on the startup volume. Try whatever you were doing again. If there's no change, continue as follows.
Triple-click the line below to select it:
/private/tmp
Right-click or control-click the highlighted line and select
Services ▹ Show Info
from the contextual menu.* An Info dialog should open.
Does the dialog show "You can read and write" in the Sharing & Permissions section?
In the General section, is the box labeled Locked checked?
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.

Similar Messages

  • REP-56071: Security check failed with error message: Error code30009 - Gene

    REP-56071: Security check failed with error message: Error code30009 - Generic access check failed..
    Hello,
    I am also receiving the above error - these reports are deployed on our Portal - to which all registered SSO users should have access to.
    one more thing...
    We obtain the error only when execute under some "load", example: 15 reports running simultaneously.
    Tx,
    Diego.

    I am also facing this problem - I've deployed the reports on the Portal and authenticated users can access the reports.
    The problem is that when any authenticated user tries to access the report, on his very first access this error is shown.
    REP-56071: Security check failed with error message: Error code30009 - Generic access check failed..
    But after the user click on the Personalize link of the portlet and specify the parameters values(which are empty initially) then report runs fine.
    Plz let me know the solution as no user will like to see this error message for the first time he opens the report.
    Regards.

  • REP-56071:Security check failed with error message:No privilege to do oper

    Hi
    I get the following error when I try to see the job status (..../rwservlet/showjobs?)
    REP-56071: Security check failed with error message: No privilege to do the operation
    I also get the following error on running any report on this server:
    REP-110: Unable to open file 'Test.rdf'.
    REP-1070: Error while opening or saving a document.
    REP-0110: Unable to open file 'Test.rdf'.
    Anyone seen the same issue before?

    Fugured it out - had issues with reportserver.conf file.
    _*                                                                                                                                                                                                   

  • REP-56071: Security check failed with error message

    Hi!
    We have an Oracle 9iAS R2 v9.0.2.2 installation on Linux (Red Hat Advanced Server 2.1). We have installed PatchSet 2703110, 2581587 and 2842923.
    Oracle9i Reports version is: 9.0.2.2.0
    iAS and Infrastructure are on separate hosts.
    Trying to run Reports demo test.jsp or test.rdf we get the following message:
    javax.servlet.jsp.JspException: REP-56071: Security check failed with error message: Error code30001 - Cannot access the server:rep_dkipcias
    In package:wwv_rw_usr function:security_check
    Command line is: server=rep_dkipcias report=/repdemo/examples/Tools/test.jsp rundate="29-MAY-03 09:05:01"
    Found on Metalink the following Note: 216847.1
    This recommends to comment out the security and destination tags in ORACLE_MIDDLETIER_HOME/report/conf/<repserver>.conf file
    After commenting them out reports works fine.
    BUT
    at the end of the note there is a note which states that "Commenting out the security tag removes the integration of the reports server and portal."
    We need reports integration with Portal. We need SSO as well.
    Could you give any workaround for this problem?
    PS.: I have red Note:213171.1, Note:216118.1, http://otn.oracle.com/products/reports/htdocs/getstart/whitepapers/securing9i.pdf and BUG:2645629
    None of them gave any solution for the problem
    Thanks in advance,
    Andras Weintrauth

    Hi Jeff,
    Q(1): Yes.
    (Report Name and Servers tab)
    Report Server: REP_DKIPCIAS
    Oracle Reports File Name: test.jsp
    Execute: as JSP
    (Other tabs)
    Default values. Unchanged.
    Q(2): (Acces Tab of Report Component)
    Publish to Portal = checked
    Inherit Privileges from Portal DB Provider = checked
    (Acces Tab of Report Server Component)
    Inherit Privileges from Portal DB Provider = checked
    (SSO User)
    The user I try to run the report with has the following group assignments:
    Privilege Group
    PORTAL_ADMINISTRATORS
    PORTAL_DEVELOPERS
    DBA
    PORTLET_PUBLISHERS
    Additional Info:
    To be more specific: The mentioned security check failure exists outside of Portal as well. Eg. when we try to run the default portal test examples (test.jsp, test.rdf) from the iAS home page Demonstartions tab.
    Thank You in advance,
    Andras

  • Trying to assign Security Baseline fails with error 24001

    We are trying to assign the Sample Security baseline updates to a cluster group in VMM.
    We have followed the steps here
    http://technet.microsoft.com/en-us/library/gg675110.aspx
    But the job to assign the baseline fails with the following:-
    Error 24001
    Update server operation failed with error: The specified item could not be found in the database.
    We are running VMM 2012R2 V 3.2.7510.0 on Windows Server 2012R2

    Remove wsus from VMM and add it again.
    This will fix the problem. Otherwise I Think cleaning SQL of missing update fixes the problem.

  • SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has be

    Hello, I have a sql 2005 server, and I am a developer, with the database on my own machine.  It alwayws works for me but after some minutes the other developer cant work in the application
    He got this error
    Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: 192.168.1.140]
    and When I see the log event after that error, it comes with another error.
    SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. [CLIENT: 192.168.1.140]
    He has IIS5 and me too.
    I created a user on the domain called ASPSYS with password, then in the IIS on anonymous authentication I put that user with that password, and it works, on both machines.
    and in the connection string I have.
    <add key="sqlconn" value="Data Source=ESTACION15;Initial Catalog=GescomDefinitiva;Integrated Security=SSPI; Trusted_Connection=true"/>
    I go to the profiler, and I see that when he browses a page, the database is accesed with user ASPSYS, but when I browse a page, the database is accesed with user SE\levalencia.
    Thats strange.
    The only way that the other developer can work again on the project is to restart the whole machine. He has windows xp profession, I have windows 2000.
    If you want me to send logs please tellme

    Well here's my problem, maybe you can help. Intermittenly I get a login failed when connecting to a db engine through Server Management Studio using Windows authentication. When this happens the following entries are generated on the server's application event log:
    Event Type:        Error
    Event Source:    MSSQLSERVER
    Event Category:                (4)
    Event ID:              17806
    Date:                     1/14/2009
    Time:                     10:41:31 AM
    User:                     N/A
    Computer:          <server name>
    Description:
    SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. [CLIENT: <ip address>]
    Event Type:        Failure Audit
    Event Source:    MSSQLSERVER
    Event Category:                (4)
    Event ID:              18452
    Date:                     1/14/2009
    Time:                     10:41:31 AM
    User:                     N/A
    Computer:          <server name>
    Description:
    Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: <ip address>]
    I've already ensured that the server is set to mixed authentication mode. Oddly enough, the workaround that I've found is that if I remote desktop into the server, log in and then log back out, Management Studio is suddenly able to connect again. No idea why it works. 
    As I said before, it is intermitten. Some days it errors on login, other days it doesn't and there are no configuration changes between them. Also, both client and server are in the same domain and same site so there is no VPN or anything in between. I'm really quite stumped. Any help would be great, or if you can point me in the right direction of where to look. Thank you in advance!

  • EvtFormatMessage function fails with error code 15033 (ERROR_EVT_MESSAGE_LOCALE_NOT_FOUND) on non-English Windows OS

    I have an App which subscribes to Windows events and if it is matching the filter criteria, it reports it.
    I have observed a strange problem on non-English windows 2008 OS. 
    If the Windows event is of source = EventLog (e.g. Event ID 1102: Security log was cleared), then EvtFormatMessage fails with error code 15033. But if the event is of any other source (e.g. Microsoft Security Auditing), then it works absolutely fine.
    While calling EvtOpenPublisherMetadata, I have created locale ID as MAKELCID(MAKELANGID(0x09,0x01) i.e. Primary language = LANG_ENGLISH and Sub Language = SUBLANG_DEFAULT.
    I want events details in English only and hence primary language is put as English. If I change this macro to have primary language as LANG_CHINESE and sub language as SUBLANG_CHINESE_SIMPLIFIED, then it works fine but gives back event details in native
    OS language (Chinese in this case). That's not a desirable output for me.
    Following is the way I'm calling EvtFormatMessage 
    EvtFormatMessage(hMetaData, hEvent[0], -1, 0, NULL,
                                   1 /* EvtFormatMessageEvent */, 
                                   m_pTextBufferSize/sizeof(WCHAR),
                                   m_pTextBuffer, &dwBuffUsed);
    A work-around for this is to install a MUI pack for English language. If the MUI pack is installed then it works fine. But I cannot enforce users to have this pack installed on all their systems.
    My question is  why this API is working for some set of Events whereas failing for some specific Events? Am I doing something wrong?
    Any help would be appreciated.
    TIA,
    Regards,
    Yogesh
     

    Was on vacation and hence the delay in replying.
    As mentioned earlier, while calling EvtOpenPublisherMetadata, I have created locale ID as MAKELCID(MAKELANGID(0x09,0x01)
    i.e. Primary language = LANG_ENGLISH and Sub Language = SUBLANG_DEFAULT.  If I change this macro
    to have primary language as LANG_CHINESE and sub language as SUBLANG_CHINESE_SIMPLIFIED, then it works fine but gives back event details in native OS language (Chinese in this case).
    This is not an option for me as I want event details in English language only.
    Regards,
    Yogesh
    Regards, Yogesh

  • [ForumFAQ]How to troubleshoot error "SSPI handshake failed with error code 0x80090324"

    Understanding the problem:
    When connect to SQL Server with Windows authentication, you may receive the following message in the SQL Server error log:
    SSPI handshake failed with error code 0x80090324, state 14 while establishing a connection with integrated security; the connection has been closed.
    Security Support Provider Interface (SSPI) is a set of Windows APIs that allows for delegation and mutual authentication over any generic data transport layer, such as TCP/IP sockets. SQL Server supports Kerberos indirectly through the Windows Security Support
    Provider Interface (SSPI) when SQL Server is using Windows Authentication.
    "SSPI Handshake Failed" error happens usually when connection failed between the server and domain controllers or failed Kerberos Authentication. There are many reason for SSPI Handshake error to appear in SQL Server error log.
    Troubleshot the problem:
    Download and install the Windows error code lookup tool Err.exe to view error descriptions for Windows Error Codes.
    The error code 0x80090324 (SEC_E_TIME_SKEW) means "clock on client and server machines are skewed". In most case, this is a Kerberos issue. Kerberos is using a timestamp to protect against replay attacks. The maximum time skew that can be tolerated
    between a ticket's timestamp and the current time at the KDC is 5 minutes by default.
    Also check the Windows Event Log of client machine, domain controller and the SQL Server machine for existence of W32time error messages.
    The solution:
    Make sure the clock of client server, domain controller and the server running SQL Server are within five minutes of each other. Or Resynchronize the clock by run w32tm /resync on client machine and SQL Server machine.
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

    This error can happen due to Active Directory configuration issue or Network related issues. Assuming they are fine,
    another reason could be related to fail Kerberos Authentication to connect to SQL Server.
    In Windows 2003 and above, the default method of establishing a connection is Kerberos but if it fails, then connection may be established using NTLM. An error may be registered on SQL Server error log due to Kerberos failure.
    To confirm if you have any database connection using Kerberos authentication, run this on your SQL Server
    SELECT distinct auth_scheme FROM sys.dm_exec_connections
    If you only see NTLM and SQL then, there is no Kerberos connection.
    To use Kerberos, the client and SQL Server must be in the same domain or trusted domains and a Service Principal Name (SPN) must be registered with Active Directory for SQL Server service account.
    You can check if the service account already has SPN, by running this on the SQL Server
    setspn -l <domain\sqlserviceaccount>
    If you don't see anything starting with MSSQLSvc\ then the account is not setup with SPN.
    You can manually register SPN as a Domain Administrator using these commands.
    To      create an SPN for the NetBIOS name of the SQL Server use the following      command:
    setspn –A MSSQLSvc/<SQL Server computer name>:1433      <Domain\Account>
    To      create an SPN for the FQDN of the SQL Server use the following command:
    setspn      -A MSSQLSvc/<SQL Server FQDN>:1433 <Domain\Account>
    If SQL Server service account is granted "Validated write to service principal name" privilege in Active Directory, SQL Server database engine will register itself when it starts and unregisters at shutdown. If you Domain Administrators do not permit this setting
    then you should manually register the SPN and the SSPI error will go away.
    Also the SQL Server service account must be granted "Account is trusted for delegation" privilege in Active Directory. If your SQL Server connects to other SQL Server using Linked Server then the server must also be granted "Trust this computer for delegation
    to any service" privilege.
    For a named instance, you can use the FQDN of the named instance instead of SQL Server FQDN and use the port number.
    For a clustered server, you should use the FQDN of the SQL Server virtual name. In this case you will need two entries, one with port name and one without such as
    setspn -A MSSQLSvc/<Virtual SQL Server FQDN> <Domain\Account>
    setspn -A MSSQLSvc/<Virtual SQL Server FQDN>:1433 <Domain\Account>
    Kerberos authentication works when SQL Server, Service Account and Windows account accessing the SQL Server are in same windows domain. If anyone these are in different domain, there must be bidirectional trust established between the domains, otherwise it
    does not work.

  • HT1212 I am unable to get our of a continuous cycle when trying to update or restore my iPad 2. Plug in to iTunes 12.0.1 (latest version). Click update, told can't update, have to restore. Restore fails with error 9. Any help appreciated.

    When I tried to update my iPad I got an error 9. Now, I am unable to access my iPad. It is in a continuous cycle when I try to update or restore the iPad 2. Plug in to iTunes 12.0.1 (latest version). Click update, told can't update, have to restore. Restore fails with error 9. Any help appreciated.
    Here's the cycle:
    I plug in my iPad when “cable to iTunes shows on iPad screen. It says "Your iPad can't be updated, you must restore it to factory settings." That bad enough news, but it gets worse.
    Click Restore
    Extracting software…
    Preparing iPad for restore
    Waiting for iPad…
    Verifying iPad restore with Apple…
    (empty bar under the Apple logo…does not show any activity)
    “The iPad “iPad” could not be restored. An unknown error occurred (9).”
    Notes: I just upgraded to OS X Yosemite 10.10.1 on my iMac (27-inch, Mid 2011) in the last week. It’s the first time I’m tried to backup/update my iPad since the iMac update.
    I swapped out the USB cable to a new cable and get the same results.
    I also unplugged all other USB devices from the iMac and security on my iPad and still get the same results.
    I find it strange that it shows no Serial number for my my iPad 2 when plugged in. It shows “Serial Number: n/a on the screen when it displays: “iPad Recovery Mode To update your iPad without erasing its contents, click Update. To restore your iPad to its factory settings, click Restore iPad.
    I prefer to update my iPad, but it displays “Your iPad can’t be updated, you must restore it to factory settings. If you previously backed up the iPad, click Restore Backup after the restore process completes.”
    It’s a continuous loop. I get the display on my iPad to plug in the iPad to iTunes, plug it in which ends after going through the above procedure saying an error occurred (9).
    So now I cannot use my iPad. When I turn it on I get the display showing me to plug it into iTunes with the cable. Since this is the only option I have I plug it in and the loop begins.
    Any advice would be appreciated.
    Thanks!

    Hello jaybearden,
    Thanks for the question. After reviewing your post, it sounds like you are not able to restore the iOS device since you get an error 9. I would recommend that you read this article, it may be able to help the issue.
    Resolve iOS update and restore errors - Apple Support
    Check your security software
    Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
    Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • Report failing with error

    Hi All,
    Application R12.1.3 with Shared Application Tier 2 nodes
    Database : 11g R 11.2.0.2 with RAC 2 nodes with ASM
    We have a concurrent program which gets fired when submitted thru API . For each order program is run once . If there are more orders it will run n number of times . At this time one request is failing with error
    REP-0004:
    REP-0069:
    REP-57054:
    But for the same failed request when we run separately(with same parameters) it is completing Normal . There is no other error in Manager Logs.
    please help what can be the issue.
    thanks
    Mapps

    Please see the following docs/links.
    Concurrent Processing - Concurrent Reports Failing With Errors REP-0004,REP-0082 and REP-0104 [ID 844976.1]
    https://forums.oracle.com/forums/search.jspa?threadID=&q=REP-0004+AND+REP-0069+AND+REP-57054&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    If the links did not help, please enable trace/debug and see if you get more details about the error and post the contents of the log file then -- How Can Trace and Debug Be Turned On For A Concurrent Request? [ID 759389.1]
    Thanks,
    Hussein

  • Call to WPG_SESSION API Failed. Error-Code:6550

    Can someone please help me figure out what I may be doing wrong? Using recent downloaded versions of 8i and 9iAS I cannot access Portal30 using IE5 browser. Please see error below. During portal configuration I specified connect string of oracle:1521:dba1. The connectstring entry of the DAD is dba1. I ran ssodatan. The database is open, listener is listening and SQL*Plus, DBA Studio, Net8 Assistant all connect to dba1 fine. Discussions mention cookies, upgrades, etc., but nothing definitive. Troubleshooting Guide does not reference error 6550. I am at a loss. Any suggestions would be appreciated.
    I downloaded and installed 8.1.7 on NT host oracle then downloaded and installed 9iAS on another NT host. Portal Diagnostics are successful, however I get database login failed when attempting to use IE5 browser to access portal at http://oracle/pls/portal30/PORTAL30.home
    Here's the diags:
    D:\ora9ias\portal30\admin\plsql>set ORACLE_HOME=d:\ora9ias
    D:\ora9ias\portal30\admin\plsql>diag -s portal30 -c dba1
    Begining Portal Diagnostics
    ...portal_schema: portal30
    ...portal_password: *************
    ...portal_connect_string: dba1
    Loading java class for Portal Diagnostics ...
    SQL*Plus: Release 8.1.7.0.0 - Production on Wed Jul 25 08:41:58 2001
    (c) Copyright 2000 Oracle Corporation. All rights reserved.
    Connected to:
    Oracle8i Enterprise Edition Release 8.1.7.0.0 - Production
    With the Partitioning option
    JServer Release 8.1.7.0.0 - Production
    Creating Table 'wwsec_diagnostic$'
    Creating Sequence 'wwsec_diagnostic_seq'
    Diagnostics Report v 1.01: Oracle Portal v 3.0.9.8.0
    As of 25-Jul-2001 08:42:17 Schema Name: PORTAL30 SSO Schema Name: portal30
    _sso
    Proxy Server Settings:
    HTTP Server:
    HTTP Server Port:
    No Proxy Servers for Domains beginning with:
    URL Connection Time-Out (seconds):
    PORTAL30.wwsec_enabler_config_info$
    Login Server URL : http://oracle/pls/portal30_sso/portal30_sso.wwsso_app_admi
    n.ls_login
    DAD : portal30_sso
    Host connection : successful.
    mod_plsql : working.
    JServ : working.
    Schema name : portal30_sso
    Connect string : dba1
    Authentication mode : Single Sign-On
    Partner Application Information
    **** The Login Server (portal30_sso) ****
    Home URL : http://oracle/pls/portal30_sso/portal30_sso.home
    Success URL : http://oracle/pls/portal30_sso/portal30_sso.wwsso_home.pro
    cess_signon
    DAD : portal30_sso
    Host connection : successful.
    mod_plsql : working.
    JServ : working.
    Schema name : portal30_sso
    Connect string : dba1
    Authentication mode : Single Sign-On
    **** Oracle Portal (portal30) ****
    Home URL : http://oracle/pls/portal30/portal30.home
    Success URL : http://oracle/pls/portal30/portal30.wwsec_app_priv.process
    _signon
    DAD : portal30
    Host connection : successful.
    mod_plsql : working.
    JServ : working.
    Schema name : portal30
    Connect string : dba1
    Authentication mode : Single Sign-On
    **** The Login Server (portal30_sso) ****
    Home URL : http://oracle/pls/portal30_sso/portal30_sso.home
    Success URL : http://oracle/pls/portal30_sso/portal30_sso.wwsso_home.pro
    cess_signon
    DAD : portal30_sso
    Host connection : successful.
    mod_plsql : working.
    JServ : working.
    Schema name : portal30_sso
    Connect string : dba1
    Authentication mode : Single Sign-On
    Diagnostics completed successfully!
    Disconnected from Oracle8i Enterprise Edition Release 8.1.7.0.0 - Production
    With the Partitioning option
    JServer Release 8.1.7.0.0 - Production
    D:\ora9ias\portal30\ admin\plsql>
    Call to WPG_SESSION API Failed.
    Error-Code:6550
    Error TimeStamp:Wed, 25 Jul 2001 12:33:52 GMT
    Database Log In Failed
    TNS is unable to connect to destination. Invalid TNS address supplied or destination is not listening. This error can also occur because of underlying network transport problems.
    Verify that the TNS name in the connectstring entry of the DAD for this URL is valid and the database listener is running.
    null

    I met that error several times. Check TNS connection from web server box to database server, if applicable. - use tnsping.
    That's the only cause that produces the error. If the web server box has more than one Oracle Home, find the correct one. Check $iAS_home/Apache/bin/apachectl script which will tell you its oracle home directory. It may not use $TNS_ADMIN/tnsnames.ora, but $ORACLE_HOME/network/admin/tnsnames.ora.

  • Windows 7 update fails with error 8000FFFF

    I've got a Windows 7 x64 installation that I've had for around three months.  Everything has been fine and working up until a few weeks ago.  When I run Windows Update it finds updates and allows me to select them, but when I run the install it fails with error 8000FFFF.  Update used to work, but then suddenly quit.
    I've dug through tons of forum and web sites regarding this specific error, but they all of their solutions do nothing to fix my problem.  In frustration I decided to put in a spare hard drive and install Windows 7 from scratch.  I did that and the first thing I tried to do after logging in was updates and it failed for the same reason (8000FFF).
    I have the same situation with a Windows Storage Server 2008 x64 that I have as well.  It has been runing for about six months or more and updates were working fine.  Then update started failing for the same or some other reason about the same time.  On this machine I can start the update and see it report a percentage downloading the update.  It gets to about 5 or 6 percent and then fails.
    Is there some possible networking issue at play in my situation?  I have earlier Windows versions (XP, XP64, Svr 2003 and Svr 2003 R2) and updates work fine on those.  I know those are using a different mechanism, but I do not notice any other kind of networking issues from my house to the Internet.  I have not changed anything or any settings in my firewall at all.  Is there some specific protocol, port or something that has to work prefectly in order for the new Windows update to work? 
    All of my machines are pretty much Intel based.  Win7 box is a Core2Duo on an EVGA 680i motherboard.  The servers are Intel Xeons with Intel motherboards, chipsets and nics.
    Thanks for any advice and help

    Wow, suddenly I have the same bizarre error at 11% of downloading, then error #8000FFFF.
    Fix IT, registry keys and SoftwareDistribution folder cleaning, uninstalling previous updates, manual downloading of appropriate updates and attempt do install it and creating/deleting user profiles - don't work at all.
    Any new ideas?
    Thanks,
    Win7 x64 SP1
    Package KB2633873 failed to be changed to the Installed state.
    Status: 0x8e5e0408.Windows update "Security Update for Windows (KB2633873)" could not be installed because of error 2388526088 "" (Command line: ""C:\Windows\system32\wusa.exe" "C:\Users\Wiewior\Downloads\Windows6.1-KB2633873-x64.msu"       
    Package KB2645640 failed to be changed to the Installed state. Status: 0x8e5e0408.
    Windows update "Security Update for Windows (KB2645640)" could not be installed because of error 2388526088 "" (Command line: ""C:\Windows\system32\wusa.exe" "C:\Users\Wiewior\Downloads\Windows6.1-KB2645640-x64.msu"       

  • My IPOD Touch initially had a white screen.  I tried correcting this by restoring default settings via ITunes.  The Restore Failed with error 1602 and now the IPOD touch is completely dead. It will not power on or respond when I plug it into my PC via USB

    My IPOD Touch initially had a white screen.  I tried correcting this by restoring default settings via ITunes.  The Restore Failed with error 1602 and now the IPOD touch is completely dead. It will not power on or respond when I plug it into my PC via USB.  I get an error on my PC stating that device attached to USB port is not recognizable.  Can anyone help?

    Error 1602: Try the following steps to resolve this error:
    Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
    Follow the steps listed for Error 1604.
    This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
    Above from:
    http://support.apple.com/kb/TS3694

  • CcmSetup failed with error code 0x80004005 - windows 8.1

    using sccm 2012 r2, trying to push to a windows 8.1 client i get:
    <![LOG[==========[ ccmsetup started in process 7416 ]==========]LOG]!><time="16:05:28.041+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9272" file="ccmsetup.cpp:9437">
    <![LOG[Running on platform X64]LOG]!><time="16:05:28.042+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9272" file="util.cpp:1837">
    <![LOG[Updated security on object C:\WINDOWS\ccmsetup\cache\.]LOG]!><time="16:05:28.042+00" date="01-15-2014" component="ccmsetup" context="" type="0" thread="9272" file="ccmsetup.cpp:9281">
    <![LOG[Launch from folder C:\WINDOWS\ccmsetup\]LOG]!><time="16:05:28.042+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9272" file="ccmsetup.cpp:721">
    <![LOG[CcmSetup version: 5.0.7958.1000]LOG]!><time="16:05:28.042+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9272" file="ccmsetup.cpp:727">
    <![LOG[In ServiceMain]LOG]!><time="16:05:28.044+00" date="01-15-2014" component="ccmsetup" context="" type="0" thread="9468" file="ccmsetup.cpp:3365">
    <![LOG[Running on 'Microsoft Windows 8.1 Pro' (6.3.9600). Service Pack (0.0). SuiteMask = 272. Product Type = 18]LOG]!><time="16:05:28.084+00" date="01-15-2014" component="ccmsetup" context="" type="1"
    thread="9468" file="util.cpp:1919">
    <![LOG[Ccmsetup command line: "C:\WINDOWS\ccmsetup\ccmsetup.exe" /runservice /config:MobileClient.tcf]LOG]!><time="16:05:28.084+00" date="01-15-2014" component="ccmsetup" context="" type="1"
    thread="9468" file="ccmsetup.cpp:3590">
    <![LOG[Command line parameters for ccmsetup have been specified.  No registry lookup for command line parameters is required.]LOG]!><time="16:05:28.084+00" date="01-15-2014" component="ccmsetup" context=""
    type="1" thread="9468" file="ccmsetup.cpp:3775">
    <![LOG[Command line: "C:\WINDOWS\ccmsetup\ccmsetup.exe" /runservice /config:MobileClient.tcf]LOG]!><time="16:05:28.084+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468"
    file="ccmsetup.cpp:3776">
    <![LOG[SslState value: 224]LOG]!><time="16:05:28.085+00" date="01-15-2014" component="ccmsetup" context="" type="0" thread="9468" file="ccmsetup.cpp:4425">
    <![LOG[CCMHTTPPORT:    80]LOG]!><time="16:05:28.086+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:8617">
    <![LOG[CCMHTTPSPORT:    443]LOG]!><time="16:05:28.087+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:8632">
    <![LOG[CCMHTTPSSTATE:    224]LOG]!><time="16:05:28.087+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:8650">
    <![LOG[CCMHTTPSCERTNAME:    ]LOG]!><time="16:05:28.087+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:8668">
    <![LOG[FSP:    ]LOG]!><time="16:05:28.087+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:8720">
    <![LOG[CCMFIRSTCERT:    1]LOG]!><time="16:05:28.087+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:8778">
    <![LOG[Config file:      C:\WINDOWS\ccmsetup\MobileClientUnicode.tcf]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468"
    file="ccmsetup.cpp:4539">
    <![LOG[Retry time:       10 minute(s)]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:4540">
    <![LOG[MSI log file:     C:\WINDOWS\ccmsetup\Logs\client.msi.log]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468"
    file="ccmsetup.cpp:4541">
    <![LOG[MSI properties:    INSTALL="ALL" SMSSITECODE="consto" CCMHTTPPORT="80" CCMHTTPSPORT="443" CCMHTTPSSTATE="224" CCMFIRSTCERT="1"]LOG]!><time="16:05:28.088+00"
    date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:4542">
    <![LOG[Source List:]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:4550">
    <![LOG[                  \\TA-SRV-SC.constoplc.local\SMSClient]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup"
    context="" type="1" thread="9468" file="ccmsetup.cpp:4557">
    <![LOG[                  \\TA-SRV-SC.constoPLC.LOCAL\SMSClient]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup"
    context="" type="1" thread="9468" file="ccmsetup.cpp:4566">
    <![LOG[MPs:]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:4569">
    <![LOG[                  TA-SRV-SC.constoplc.local]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup" context=""
    type="1" thread="9468" file="ccmsetup.cpp:4584">
    <![LOG[MapNLMCostDataToCCMCost() returning Cost 0x1]LOG]!><time="16:05:28.091+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmutillib.cpp:5479">
    <![LOG[No version of the client is currently detected.]LOG]!><time="16:05:28.093+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:2748">
    <![LOG[Folder 'Microsoft\Configuration Manager' not found. Task does not exist.]LOG]!><time="16:05:28.094+00" date="01-15-2014" component="ccmsetup" context="" type="0" thread="9468" file="wintask.cpp:622">
    <![LOG[Updated security on object C:\WINDOWS\ccmsetup\.]LOG]!><time="16:05:28.095+00" date="01-15-2014" component="ccmsetup" context="" type="0" thread="9468" file="ccmsetup.cpp:9281">
    <![LOG[A Fallback Status Point has not been specified.  Message with STATEID='100' will not be sent.]LOG]!><time="16:05:28.095+00" date="01-15-2014" component="ccmsetup" context="" type="1"
    thread="9468" file="ccmsetup.cpp:9763">
    <![LOG[Running as user "SYSTEM"]LOG]!><time="16:05:28.118+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:1995">
    <![LOG[A Fallback Status Point has not been specified.  Message with STATEID='328' will not be sent.]LOG]!><time="16:05:28.118+00" date="01-15-2014" component="ccmsetup" context="" type="1"
    thread="9468" file="ccmsetup.cpp:9763">
    <![LOG[CcmSetup failed with error code 0x80004005]LOG]!><time="16:05:28.119+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9272" file="ccmsetup.cpp:10879">
    any ideas why its failing?

    Hi,
    I've seen the same error on a customer where we had Windows Intune Client (SCCM) installed previously. Did you try it on a newly deployed computer? If you had Intune or another CCM client on it previously make sure you clean it up. Here is a well formulated
    instruction:
    http://douwevanderuit.wordpress.com/2014/01/30/removing-windows-intune-client/
    Usually when deploying to many clients we use a startup script, there is a great one that Jason Sandys made in the link below.
    http://blog.configmgrftw.com/configmgr-client-startup-script/
    There should be no problems deploying SCCM 2012 R2 clients on Windows 8.1 unless there is something wrong with either the setup or the client computer.
    All the best, Jesper Hassing - MCTS SCCM 2012 - MCSA 2012 Server - MCP

  • 8.1.6 install fails with Error 1321 Installer has insufficient privileges -

    Adobe Reader “Check for Updates” identifies “Adobe Reader 8.1.6 (CPSID_49167)” as “Available”.
    Installation fails with “Error 1321.The Installer has insufficient privileges to modify the file C:\Program Files\Adobe\Reader 8.0\Reader\plug_ins\Search.api.”
    Reboot tries to complete install adding unwanted desktop icon, but CPSID_49167 still shows as “Available” and MSI29706>LOG(s) show above error.
    XP SP3 Home, IE7, Adobe Reader 8.1.5

    Thanx kashifMohd,
    Downloaded the fix, vetted it, and before creating a new Administrator account used the following recipe with success:
    1. Ran downloaded fix with usual Admin Account and got the “Error 1321 for Search.api.” as before, but now there is a pop-up asking "Retry" or "Cancel" that did not appear when using "Get Updates" function from running Adobe Reader. Replied "Cancel".
    2. Rebooted, and disabled Kaspersky Anti-Virus.
    3. Again ran downloaded fix with usual Admin Account and got Error 1321 for different file: "C:\Program Files\Adobe\Reader 8.0\Reader\plug_ins3d\3difr.x3d" with pop-up asking "Retry" or "Cancel".
    4. Clicked "Retry" this time and installation completed successfully.
    Thanx again.

Maybe you are looking for