Security based on the position and responsibility of Siebel tables.

Hi Forum,
We have a requirement to show some reports based on OLTP (Siebel Base tables with S_) tables. so we have created a repository and created few reports in OBIEE.
Now we want to implement security based on these tables. Like siebel users will be accessing these reports, So how do we implement security based on the position and responsibility of Siebel tables.
I request to share any links or docs pertaining to above mentioned implementation.
Thanks

Could be interference
AirPort and Bluetooth: Potential sources of wireless interference
Try:
- Reseting the BT headset
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset network settings: Settings>General>Reset>Reset Network Settings. You will have to rejoin all wifi networs and re-pair all BT devices

Similar Messages

How to restrict the Request and Response process in that cookies should be Secure way SAP Portal 7.0 ?

Dear Experts,
Please any one can help me i am getting one security issue.Some third party tools using and hacking the Request and Response of the Server.That time there taking one successfully Request (GET http://1.1 302 found) and Response (http://1.1 200 ok).In this request based on again there giving some invalidate credential in that time server giving request replacing for success fully Request that time there login in to portal successfully(Bypassing).In this Request level only getting the information for URL and set-cookies only.Here any process is there to restrict the set cookies.like JSESSIONMARKID and JSESSIONID SAP_LB.
We are using 7.0 Version and SP 12. Please share you are solutions because of this is very high problem here.
Thanks for Advance
Thanks and regrades,
Durga Rao.

Dear Samuli,
Thanks for the Replay,
We are using HTTPS and SSL confined but man in the middle types of attack is happening here there using one tool based one there taking the Request and Response.The below given cookie are available in that request.
According to this , set-cookie: JSESSIONMARKID , JSESSIONID and MYSAPSSO2 values are user login time it will change every time are not.
After capturing above response HTTP/1.1 302 etc , when user gives valid credentials and logs in ,
and now ill give wrong password and wrong user id and on click of log on button, i can intercept the request and response coming from the server and when i replace this valid response stil i am able to loggin in to the portal , which should not happen as JESSIONMARKID is changed , server should not allow , but it is loggin in.Standard Login page also allowing to login in this case.
My server version is EP 7.0 SP 12.
Please suggest a solution so that if we restric the hacker at this stage , no matter he can never hijack the sesiona and login with invalid username and password.
Thanks for Advance
Thanks and regrades,
Durga Rao.

Can the position and szing of a control element in a View be controlled from the ViewModel?

Is it possible to change the position of a control, say a label, as a response to some action/operation from the ViewModel? Like if one response to something is true then place the label in the top left corner. If false, place the label
in the lower right corner. I realize you could have a label in each position and just set the visibility. But can the position and sizing of said label be controlled from the View Model? What would be a sample coding of this? would
it be in the xaml or combination of a method in the ViewModel and the xaml?
Rich P

First off Rich, say TextBlock to yourself ten times.
Use a TextBlock rather than a label.
There are a bunch of different ways to do this and the easiest is to have two controls whose text is bound to the one property.
Bind the Visibility of each to another 2 properties in the viewmodel.
Collapse one and Visible the other.
The reason for that is that it's easier.
Technically, you could put one textblock in a grid and use margin to control this. You could animate x y co-ordinates and move the textblock mysteriously across the window if you put your mind to it.
Or you could put it in a row/column "cell" of a grid and change which cell it goes in - but that would involve some mechanism like messaging from the viewmodel to the view and is not really ideal if you can avoid it.
I'd have a pair of textblocks, here's one:
<TextBlock Name="TopLeftMsg"
Text="{Binding Msg}"
Visiblity="{Binding TopLeftVis}"
Both would bind to a public string property msg in the viewmodel.
They each get their own public visibility property and that'd be switched between Visibility.Visible and Visibility.Collapsed.
Sizing of textblocks is best fitted to content because all you see is the text.
Textboxes are arguably different because you can see the things.
Hope that helps.
Recent Technet articles:
Property List Editing;
Dynamic XAML

Ie 11 fails with 'IE Security detected that the URL and the configuration link to not match

HI,
I Have a user that is using IE 11 and is getting the following error:
IE Security detected that the URL and the configuration link to not match. Please use the URL as configured. Is and IP based URL. On IE 10 we get a similar message, but as soon as we add it to our trusted site and switch to compatibility
mode the issue goes away.
For example http://10.10.10.180/xxx/iafwebsite_810/
What would be causing this issue?
Any help would be appreciated.
Thanks,
Trish
Trish Leppa

Hi,
It seems that this URL doesn't meet security level. Thus, as long as you add this URL to Trusted sites zone, this issue is fixed.
Thanks!
Andy Altmann
TechNet Community Support

Sql agent jobs based on the database and the user

Dear All,
I have a requirement of configuring an user who should only have access to one database out of all and also able to create, view and modify sql agent jobs only for the allowed database. For allowing to see the selected database to particular user I have
granted permissions as per below,
create LOGIN mhtc WITH PASSWORD='mhtc', CHECK_POLICY = OFF;
USE master;
GO
DENY VIEW ANY DATABASE TO mhtc;
USE master;
GO
ALTER AUTHORIZATION ON DATABASE::MHTC TO mhtc;
GO
but user not able to see sql agent jobs so I want to give necessary permission to this user to view,create and modify sql agent jobs only in allowed databases. Basically I want to separate users from each database and separate sql agent jobs based on the
user and database.
Your expert advices are highly appreciated.
Thanks,
Manjula

I want to give necessary permission to this user to view,create and modify
sql agent jobs only in allowed databases.
Hello Manjula,
SQL Server Agent Jobs are not created / dedicated for a user database. The Jobs are store in System database "msdb".
See
Implement SQL Server Agent Security for Details about required permissions.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Percentage based on the Date and Dimension - WEBI

Hello,
I have to calculate percentage based on the Dates and a Dimension.
I have BEX Query as source and reporting is done on BOXI - WEBI
Here is the table structure in the report.
List# , Process01, Process02.
List# is unique and Process01-Has 4 operations, Process02 has 3 operations (and these Operations can change from 3 to 7 or 2).
Operations will have a 'Date' only when it is completed.
and when all the operations in a 'Process' have 'Date' then i need to get the 'Latest Date'. If few of the operations are not confirmed, then i need to get the percentage like when 2 of 4 operations have date it will be 50% and when no operation is confirmed then 0% and so on .
Example Cube data:
List#,ProcessCategory,Operation,Date
100,Process01,456,11/11/2010.
100,Process01,457,11/12/2010.
100,Process01,489,
100,Process01,490,
100,Process02,890,11/13/2010.
100,Process02,891,11/14/2010.
100,Proceess02,892,11/15/2010
Result:
List#, Process01, Process02
100,50%,11/15/2010.
Please help me in this, i tryed different logics but it is giving ERROR at percentage.
Your help would be appreciated!
Thanks in advance.

I applied this:
If([Process Category] InList("Process01") And IsNull([Date]);[Percentage];Max(Date)))
[Percentage] = (Count([Date])/Count([Operation]))*100.
but, this is not becoming true - even when Operation has one Date
Showing result as:
List#,Process01,Process02
100, 11/12/2010, 11/15/2010
But result should be
100,50%,11/15/2010
Can anyone help me achieve the right result!
Thanks in advance.

How can i change the position and size of the applet

dear fellows,
how can i change the position and size of the applet in which form is running over the web.
thanx
Mochoo

Yes, you can add the following line to your formsweb.cfg section :
HTMLbodyAttrs=onLoad='javascript:self.moveTo(100,100)'
if you are in SEPERATEFRAME = FALSE
Or Set_Window_Property( FORMS_MDI_WINDOW, POSITION, X, Y ) ;
if you are in SEPERATEFRAME = TRUE

Update table HRP1001. Change the Position and the Org Unit.

Hi,
I am new to SAP HR and have been given a work in this area. The requirement is to update the relationship table HRP1001 replacing the old Manager' Position and the Org Unit with the New Manager's Position and the Org. Unit.
I have some how found out the way to get the Postion and the Org unit of the old manager. Now I am replacing the same with the new details using the Update HRP1001 Command but this is the old and not recommended method acheiving this task.
Can anyone please suggest me any Function Module OR the BAPI to update the HRP 1001 table with the New MAnager;s Position and the Org Unit.
Thanks...!!!
Regards,
Deepak.

Hi Kalpesh,
I am using the FM: 'BAPI_HRMASTER_SAVE_REPL_MULT'but still not updating. I am trying to change the Position and the Org unit but not successful yet.
I first used the Operator 'I' withi the table BAPIHROBJ-OPERATOR, it failed then I tried 'U' for update it still failed. Can you please let me know how many such operations possible with their charecter values apart from I & U. the domain value set does not exist as it is char1.
Now I came to know that I have to terminate the old relationship by changing the ENDDA and create a new one with the new BEGDA as tomorrow's date.
Can you please suggest something.
Regards,
Deepak.

Problem to calculate the coherence (using NetworkFunction-VI) with only 1 row of data for each, the stimulus and response input

Hello,
I am trying to calculate the coherence of a stimulus and response
signal using the Network Functions (avg) VI's. The problem is that I
always get a coherence of "1" at all frequencies. This problem is
already known (see KnowledgeBase document: Why is the Network Functions (avg) VI's Coherence Function Output "1"?).
My trouble is that the described solution (-> the stimulus and response input matrices need to have at least two rows to get non-unity coherence values) doesn't help me much, because I only have one array of stimulus data and one array of response values.
Thus, how can I fullfil the 'coherence-criteria' to input at least two rows of data each when I just have one row of data each?
Any hint or idea is very much appreciated. Thanks!
Horst

With this weird board layout, I'm not sure whether you were asking me, but, on the assumption that you were, here goes:
I found no need to use the cross-power spectrum and power spectrum blocks
1... I was looking for speed.
2... I already had the component spectral data there, for other purposes. From that, it's nothing but addition and multiplication.
3... The "easy" VIs, assume a time wave input, as I recall. Which means they would take the same spectrum of the same timewave several times, where I only do it once.
I have attached PNGs of my code.
The PROCESS CHANNEL vi accepts the time wave and:
1... Removes DC value.
2... Integrates (optional, used for certain sensors).
3... Windows (Hanning, etc. - optional)
4... Finds spectrum.
5... Removes spectral mirrors.
6... Scales into Eng. units.
7... From there, you COULD use COMPLEX-TO-POLAR, but I don't care about the phase data, and I need the MAG^2 data anyway, so I rolled my own COMPLEX-TO-MAG code.
The above is done on each channel. The PROCESS DATA vi calls the above with data for each channel. The 1st channel in the list is required to be the reference (stimulus) channel.
After looping over each channel, we have the Sxx, Syy, and Sxy terms. This code contains some averaging and peak-picking stuff that's not relevant.
From there, it's straightforward to ger XFER = Sxy/Sxx and COHERENCE = |Sxy|^2 / (Sxx * Syy)
Note that it uses the MAGNITUDE SQUARED of Sxy. Again, if you use the "easy" stuff, it will do a square-root operation that you just have to reverse - it is obtained faster by the sum of the squares of the real and imag parts.
Hope this helps.
Steve Bird
Culverson Software - Elegant software that is a pleasure to use.
Culverson.com
Blog for (mostly LabVIEW) programmers: Tips And Tricks
Attachments:
ProcessChannel.png ‏25 KB

Does anyone know of the security breach on the iphone and what to down load to fix it?

DOES ANYONE KNOW ANYTHING ABOUT THE SECURITY BREACH ON THE IPHONE AND IF YOU DO, WHAT DO YOU DOWN LOAD TO FIX IT?

http://support.apple.com/kb/HT6147
http://support.apple.com/kb/HT1222
http://support.apple.com/kb/DL1723
There is no security breach as such but rather a possibility of one dependant on a number of factors which may or may not be applicable to you and/or your usage.
The recommendation is to update to the latest 7.0.6 update listed above. For iDevices such as the iPhone I would recommend doing this using iTunes rather than OTA. Tends to be more reliable that way.

I probably misclicked when I activated the security lock on the iPhone and now I can not figure out what password I entered. Moreover, I have patches and funky looking phone so I can not restore iphine pres itunes. Please advice.

I probably misclicked when I activated the security lock on the iPhone and now I can not figure out what password I entered. Moreover, I have patches and funky looking phone so I can not restore iphine pres itunes. Please advice.

Your only recourse is to force it into DFU mode:
Turn your phone off and connect your cable to the computer, but not the device just yet. Start up iTunes. Now, hold down the home button on your phone and plug it in to the cable - don't let go of the button until iTunes tells you it's detected a phone in recovery mode. Now you can restore to factory settings.

Logo based on the divission and company code

hi to all,
I need to place a logo based on the divission and as well the company code.can any one provide me the logic.coz i have 10 logo's so how could i proceed with this...urgent
thanx and regards,
loki
Edited by: Alvaro Tejada Galindo on Feb 19, 2008 11:16 AM

Hi,
You could include the company code and division in the name of the logo, for example;
Z_LOGO_1000_250
Z_LOGO_1000_300
Z_LOGO_company code_division
Then in your script
/: DEFINE &LOGO_NAME& = 'Z_LOGO_'&BUKRS&'_'&DIVISION&
Then
/: INCLUDE &LOGO_NAME&
So when your company adds new company codes or divisions you don't need to change the script, just upload the new logo.
Regards,
Nick

How to make Nokia Suite remember the position and ...

how to make Nokia Suite remember the position and the size i set it?
because everytime i start it, it defaults in the middle of the screen and in the smallest possible size.
Nokia Suite 3.3.86
Windows Vista
Greece Nokia X6 RM-559 v40.0.002

Again, are you talking about genuine Nokia firmware, not any of some 3rd-party customised versions?
For officially released firmware, you may force Nokia Suite to reinstall even if your firmware is already up to date. This feature might be missed in its GUI as its link is "hidden" in the prompt message, not on a button or highlighted with underscore. Try Nokia Suite, once the phone is connected, click the icon of Software Update on the top, then click the word "reinstall" in the prompted message.
bbao
* If this post helped you, please click the white Kudo star.
* If this post has solved your issue, please click Accept as Solution.

Just got a 'Mozilla' security alert on the PC, and something started a system scan.. IS THIS A TROGAN ATTACK ? I forced power down and system restore before coming here

Repeat. Just got a 'Mozilla' security alert on the PC, and something started a system scan.. IS THIS A TROJAN ATTACK ? I forced a power down and did system restore before coming here. I will run Ccleaner when I leave this site.
I have NEVER seen any Mozilla alert or mention of any system scan from Firefox. I have seen Trojan Hijacks, and deal with friends PC's for them, this looked similar.

See https://secure.wikimedia.org/wikipedia/en/wiki/Rogue_security_software
No, Firefox does not have built-in anti-virus feature, so your description can be correct. You may wish to try this extension: https://addons.mozilla.org/en-us/firefox/addon/wot-safe-browsing-tool/
Malware Removal Links: http://www.safer-networking.org , http://www.malwarebytes.org , http://www.spywareterminator.com , http://www.microsoft.com/security/malwareremove/default.aspx

I need to control the position and size of each java swing component, help!

I setup a GUI which include 2 panels, each includes some components, I want to setup the size and position of these components, I use setBonus or setSize, but doesn't work at all. please help me to fix it. thanks
import java.awt.Dimension;
import java.awt.GridLayout;
import java.awt.FlowLayout;
import java.awt.Toolkit;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.event.*;
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JLabel;
import javax.swing.JOptionPane;
import javax.swing.JTextField;
import javax.swing.JPanel;
import javax.swing.JList;
import javax.swing.JScrollPane;
import javax.swing.DefaultListModel;
public class weather extends JFrame {
private String[] entries={"1","22","333","4444"} ;
private JTextField country;
private JList jl;
private JTextField latitude;
private JTextField currentTime;
private JTextField wind;
private JTextField visibilityField;
private JTextField skycondition;
private JTextField dewpoint;
private JTextField relativehumidity;
private JTextField presure;
private JButton search;
private DefaultListModel listModel;
private JPanel p1,p2;
public weather() {
     setUpUIComponent();
setTitle("Weather Report ");
setSize(600, 400);
setResizable(false);
setVisible(true);
private void setUpUIComponent(){
     p1 = new JPanel();
p2 = new JPanel();
     country=new JTextField(10);
     latitude=new JTextField(12);
currentTime=new JTextField(12);
wind=new JTextField(12);
visibilityField=new JTextField(12);
skycondition=new JTextField(12);
dewpoint=new JTextField(12);
relativehumidity=new JTextField(12);
presure=new JTextField(12);
search=new JButton("SEARCH");
listModel = new DefaultListModel();
jl = new JList(listModel);
// jl=new JList(entries);
JScrollPane jsp=new JScrollPane(jl);
jl.setVisibleRowCount(8);
jsp.setBounds(120,120,80,80);
p1.add(country);
p1.add(search);
p1.add(jsp);
p2.add(new JLabel("latitude"));
p2.add(latitude);
p2.add(new JLabel("time"));
p2.add(currentTime);
p2.add(new JLabel("wind"));
p2.add(wind);
p2.add(new JLabel("visibility"));
p2.add(visibilityField);
p2.add(new JLabel("skycondition"));
p2.add(skycondition);
p2.add(new JLabel("dewpoint"));
p2.add(dewpoint);
p2.add(new JLabel("relativehumidity"));
p2.add(relativehumidity);
p2.add(new JLabel("presure"));
p2.add(presure);
this.getContentPane().setLayout(new FlowLayout());
this.setLayout(new GridLayout(1,2));
p2.setLayout(new GridLayout(8, 2));
this.add(p1);
this.add(p2);
public static void main(String[] args) {
JFrame frame = new weather();
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
}

Use code tags to post codes -- [code]CODE[/code] will display asCODEOr click the CODE button and paste your code between the {code} tags that appear.
[http://java.sun.com/docs/books/tutorial/uiswing/layout/index.html]
db

Security based on the position and responsibility of Siebel tables.

Similar Messages

Maybe you are looking for