Security cameras with blue screen

I recently bought a couple of BNC PCI cards for an older computer that I'm using as a security system. the cards physically install just fine and are recognized as video0 and video1. My problem is whenever I attempt to view the cameras connected to these cards all I see is a blue screen whenever I opening Cheese or wxcam. I just recently bought a new BNC cable to test with, but I'm unsure of what other things I can try to get the video to work. The chips are recognized as bt878, and everything seems as though it's probably be detected as far as I can tell. I don't seem to get any error messages either. would anyone have any good ideas on how to troubleshoot this outside of buying more cables or cameras. The PCI cards in question are brand new. Thanks in advance!!!

This seems like quite a serious security issue if keystrokes/commands can be entered on a locked system.
yes, it is. it is a known problem in leopard. it's fixed in snow leopard but unlikely to ever be fixed in leopard as leopard development has stopped.

Similar Messages

Satellite L650 - frequent computer restart with blue screen

Hi, I bought an L650 about 2months ago so it is still under warranty.
Recently (maybe last 2 weeks) it has continued to shut down with blue screen of death. It seemed to occur more if I opened up many tabs in internet and i thought it might be adobe flash but don't think so anymore.
It says if there is new hardware or software installed try reinstall it but I do not know which software and there is no new hardware.
"a problem has been detected and windows has been shyt down to protect your computer
A process or thread crucial to system operation has unexpectedly exited or terminated.
technical information:
*** STOP: 0x000000F4 (0X00000000000003, OxFFFFFFFFAB007A4B30, 0xFFFFFFFFFA(rest off screen from camera)
xFFFF800035C#1EO
Somthing like above although its quick video on my camera so some numbers may be wrong.
Can someone help if this is a hardware malfunction or my fault somehow?
Is this a warranty problem or what should I do?
I never made any windows CD or anything when I bought laptop unfortunately so do not know if I can reformat harddrive?
Thanks.
Kadin

Hello
It is worst than at the beginning with STOP: 0x000000F4 error message. It is always problematic to help with such problems because your notebook configuration, preinstalled software and activity is not known to us.
In my opinion you should back-up all your important data, install OS again using HDD recovery option and test functionality with original OS without any additional software installation.
If the BSOD will occur again and again I recommend you to contact nearest Toshiba service and ask for help. I have two Toshiba notebooks and until now I didnt notice BSOD at all.

IPad ios8 random reboot with blue screen

Hi everyone,
I Know this question has been posted already but I'm so frustrated.
after upgrading to iOS 8 my iPad air started to reboot randomly with blue screen at least 5 to 6 times a day.
when will apple provide an update fixing this issue? Since it seems more common.
model: iPad air wifi only
ios: 8.0.2
i have tried turning off iCloud sync as many suggested but it didn't help.
reboots are frequent when I'm using safari.
most of the time the diagnostic log shows WDT timeout
{"bug_type":"110","os_version":"iOS 8.0.2 (12A405)"}
Incident Identifier: 524C9CFE-E20D-4D2F-B661-9CFD8A0CB89E
CrashReporter Key:   1db2e77104549f32cb56eb1d2daee436b4bdd220
Hardware Model:      iPad4,1
Date/Time:           2014-10-12 16:24:31.232 +0530
OS Version:          iOS 8.0.2 (12A405)
Debugger message: WDT timeout
6s ago: 0b50 0f9fd0ce63 0r1e88000 0m0/1
OS version: 12A405
Kernel version: Darwin Kernel Version 14.0.0: Thu Sep 18 21:51:01 PDT 2014; root:xnu-2783.1.72~23/RELEASE_ARM64_S5L8960X
iBoot version: iBoot-2261.1.68
secure boot?: YES
Paniclog version: 3

Try Barry's suggestion first.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, read this.

Waking up from sleep with blue screen

Waking up from sleep with blue screen
Since a few days my MBP wakes up from sleep by showing a blue screen for 30 seconds or more, instead of jumping to the login window (password needed after sleep)
I looked in the forums for blue screen but found many problems non related to this.
Any ideas?
Could it have to do with the fact that about 4 days ago I upgraded to 4.8 from 4.7?

Hi ChangeAgent,
FINDER> FILE > FIND
Use the FIND file from the Finder, not Spotlight, to find the folder called Receipts and click on this folder. Scroll down to see if you have this Security Update installed --
Security Update: 2006-008
it may be causing general problems to everyone.
I have only seen this BLUE SCREEN since I installed this security update.
It's the very latest one.
The Blue Screen is not my only problem:
I have had two system crashes (computer waking up with DARWIN window error, fixed when I re-booted).
Scrolling has slowed down in some applications.
The update in Microsoft Office vX was reverted, yesterday I received a message that said: Welcome to Microsoft Office (how can it welcome me when I have been using it every day for the past 15 years?)
Dashboard: It takes 3 minutes for the Widgets to upload.
SOMETHING is not right with this Security Update. Apple, please HELP!
iBook 14 G4 Mac OS X (10.4.8)

IPhone5s stuck in recovery mode after lots of times displaying blue screen of death, cannot restore it as iTunes displays error 14 on verification, same time phone crashes again with blue screen.

hi, my iPhone5s is only 3 months old, it has been like a whole month now since it started crashing, displaying the blue screen of death, since yesterday it was in the loop of restart-crash, and now it is stuck in recovery mode after lots of times displaying blue screen.
I cannot restore it as phone continues crashing again with blue screen, when iTunes displays error 14 on verification.
help please, this phone is all the means of communication I have.

It's a hardware problem. That's it. You shouldn't bother yourself with this situation. Just see an AASP.

Hello i have a problem when i start woorksheet, my computer crash with blue screen sometimes.

hello i have a problem when i start woorksheet, my computer crash with blue screen.
OS: Win 2000 pack 2 and dasylab 7.00.05 ;ddi7.02 ;nidaq 7.0
I hve this problem sometimes and need to reebot my computer.This worksheet is used to generate 4 signals to output and have an acquisition tooin this 4 channels.
The error is in the blue screen:0x00000076 (0x00000000 , 0x81358300, 0x000001c2, 0x00000000).
Thanks for your help.

The DASYLab development team has read your message, and advises that there is insufficient information to be able to even start diagnosing the problem. We suggest that you send a note directly to [email protected], with your full contact information, DASYLab serial number, and the following technical information:
-The Help-->Report information - this will tell us more about the computer, video and installed memory
-Installed hardware - what DAQ devices are you using (exact models!)
-The worksheet that crashes - we need to see how the timing is configured in the worksheet
-What other programs are running at the same time?
-Does the worksheet crash every time?
-Does the NI-DAQ Test Panel work correctly for both inputs and outputs?
Sorry that we cannot be more help in this forum; we do not have much experience with blue screen under Windows 2000. This is very hard to do, and is almost always related to a hardware problem - either a resource conflict, or problems with one of the installed hardware devices (DAQ, Video, Memory...).
Regards,
-cj
- cj
Measurement Computing (MCC) has free technical support. Visit www.mccdaq.com and click on the "Support" tab for all support options, including DASYLab.

TS3274 My iPad mini retina is still having random reboots with blue screen after updating to iOS 8.0.2.i also did reset my iPad.But the problem still persis

My iPad mini retina is still having random reboots with blue screen after updating to iOS 8.0.2.i also did reset my iPad.But the problem still persists

Could you add your problem here: https://discussions.apple.com/thread/6569052? This makes sure the discussion and in one place and we can attract more attention from Apple.

Can anyone help me with blue screen while updating to ios8?

help me with blue screen while updating to io8.2

I don't have a 4G device, but I thought you can use mobile safari, the safari on the iPad, on 4G.
You could also try looking for a third party app. The official facebook app has been non to barely functional for years. I use mobile safari on my iPad although I do have a couple of apps I've used upon occasion.

Satellite M40X-169 when connected to wireless unit shuts down with blue screen and restarts

Hello.
I got the problem with my notebook when i'm connecting and getting connected to the wireless network. My notebook is shutting down with blue screen error and then restarts.
Maybe you can help me to solve this problem, because i can normaly work when i need to be connected.
Plaese help me.

Hi
It is not easy to give you some precise answer but try to remove WLAN card from device manager and restart the unit. You can also check Toshiba download page and try to install the latest WLAN card driver.

IPhone 4's camera with blue tint issue

Hi, have anyone have this problem with iphone 4 camera with blue tint when you are take picture?

I went to the Genius Bar today. Results were mixed. They definitely noticed the bluish blob when I pointed it out. They were about to swap out my iPhone with a refurb. The Genius tested the new iPhone before he gave it to me -- and it was worse. The blue blob was much more pronounced. So he tried another iPhone. It had a greenish blob. He took the back off of it to see if there was a film on the lens cover, but it was clear. He brought in another Genius who had a 1st generation iPhone 4. Interestingly, the image from that camera was perfect. Yet another Genius was brought in. They ended up checking 10 iPhones. All but that first gen iPhone 4 had the problem to differing degrees. (Mine ironically was one of the better ones.) The third Genius said, "Oh well, I guess that's the way the camera is. Remember it's just a phone." I emphasized that it's a really expensive phone and that my first gen model didn't have this problem. His response: "You can probably correct the problem with image editing software." I replied that there shouldn't be a problem in the first place.
The upshot of all this is that they're ordering a replacement camera for my iPhone, which should be in next week. We'll see if that fixes the issue.

Ipad air boots with blue screen

my ipad air boots 4 5 times with blue screen as i use my wifi.....and it happend as i updated to ios 8. And i'm noticing from few days. I need the solutions

Hi Air.sam,
Welcome to the Apple Support Communities!
I know that situations like this can be very frustrating. There are some very good troubleshooting steps that I would recommend in this situation however. Please use the attached article and troubleshooting steps to help you resolve the situation.
iPhone: Hardware troubleshooting
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Regards,
Joe

My iphnoe5S always crash with blue screen,sometimes can`t start up

my iphnoe5S always crash with blue screen,sometimes can`t start up

Hello liuqinqin,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
If the device remains unresponsive or does not turn on (or power on), reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let it charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
Have a nice day,
Mario

Window 7 on Bootcamp crush with Blue Screen..

Dear All,
I am facing with crushing on Window 7 with blue screen for quite frequently. When i using the Mac OS X Lion, It is quite stable but happened Kernel Panic or Automatic Restarting. But it only happens rarely..
Bluescreen Details:
Appears like Memory Dump Error. And also mention to remove the newly installed hardware or software. And also mention about Virtualization.
Scenario:
I have installed Oracle Virtual Box on the Bootcamp Window 7 and run the virtual machine. After that start happening this errors and i have remove all the virtual machines and Oracle Virtual Box.
Taken Action:
Remove the Bootcamp Partitions and reinstall the Window 7 but after installed, it come out blue screen once again.
What i think is because of Virtualization on BIOS but i am not sure how to turn it off on Mac.
Please give me suggestions on how to repair this and thanks in advance for your advices.
Best Regards,
Great Mahar.

I only suggested this scenario based on personal experience. I have faced 2 BSODs, while using Chrome in an XP box that I have at home. Also one of my college friends has experienced the same issue while using chrome on Windows 7. However, these have not occurred in a while since upgrading to the latest version of chrome. Honestly I don't know what could be your case but it should be a good idea to run the Apple Hardware Test to check the ram modules for errors as hatter suggested.

Each time I connect to my IBM computer it crashes with blue screen error message pops up. Apple say that it's my printer/camera drivers. The problem is with iTunes, it likes to play with all the ports on my comp and conflicts with prnt drivers. How to fix

Does anyone know how to fix this problem without disabling my printer. It's very frustrating. It's either I have my iPad or my printer. iTunes likes to play with the ports on my computer thereby causing a conflict with my printer drivers. Apple should fix this problem, I'm so annoyed.

When this problem first happened, I searched for threads and found a few. See be;ow links:
http://support.apple.com/kb/TS1502
Apple say that its a driver problem, but I've never had this problem before so I am not convinced. Another thread, which I can't seem to find, suggests that it is an apple problem - itunes plays with the ports on the company causing conflicts with existing drivers. I isolated the conflict to my new Samsung printer. I uninstalled the Samsung printer driver and then can successfully connect my ipad without the blue screen appearing.
It's not a windows problem. Windows is working fine. Only happens when Ipad is connected. Actually, this first happened after I installed the new version of itunes. I reget installing the new itunes version, but don't know how to reinstall the previous itunes version.

HELP...New Computer with blue screen crashes

I recently bought a Toshiba Qosmio x875-q7290. The computer came installed with Nortons internet suite. I uninstalled Nortons via add/remove programs in the control panel. I installed Kaspersky pure. What happens now is that I get a blue screen with white writing that say something about reboot your computer if this is the first time that this error has happened. I can't read the rest of the message because the computer starts to reboot. After doing this about 5-6x, by computer would start to boot up then there was some type of Dll error message and I couldnt advance farther on the screen. I called Toshiba tch support and they suggested a complete system restore(losing all my data). This morning I was having the same problem. Here is what the detail message says
Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.768.3 Locale ID: 1033
Additional information about the problem: BCCode: 1a BCP1: 0000000000041790 BCP2: FFFFFA8005C26B00 BCP3: 000000000000FFFF BCP4: 0000000000000000 OS Version: 6_1_7601 Service Pack: 1_0 Product: 768_1
Files that help describe the problem: C:\Windows\Minidump\071812-23415-01.dmp C:\Users\Lemuel\AppData\Local\Temp\WER-57065-0.sysdata.xml
Read our privacy statement online: http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline: C:\windows\system32\en-US\erofflps.txt
Whats causing this and how do i fix it? I did all the required updates etc?

Bug Check 0x1A: MEMORY_MANAGEMENT
Bug Check 0x1: APC_INDEX_MISMATCH
Bug Check 0xF4: CRITICAL_OBJECT_TERMINATION
Bug Check 0xC1: SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION
Bug Check 0x7E: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
0x0000001a OR 0x1a BHDrvx64.sys
0x1000007e OR 0x7e tdx.sys
Despite the multiple BSODs, and the memory management errors, this still may well be a software conflict problem. The BHDrvx64.sys file seems to be from Symantec BASH service for Symantec Endpoint Protection. The tdx.sys file a Kaspersky file. If there are remnants of Symantec/Norton AV left on your system, along with the Kaspersky AV, this is not going to be healthy. None of the ntoskrnl.exe, which is the central Windows NT OS Kernel file, crashes are going to help us much.
Click 'Start -> Control Panel - Programs and Features' and completely uninstall any and all Symantec/Norton components that you find there. Then use the Kaspersky Removal Tool to completely uninstall Kaspersky.
If no Symantec/Norton components appear in 'Programs and Features', let us know. It gets a lot more complicated to do this manually. In that case, begin by:
Then trying to stop the BASH driver BHDdrvx64
a. Open the Device Manager (devmgmt.msc)
b. Choose View > Show hidden devices and look for the BHDdrvx64 driver under 'Non-Plug and Play Drivers'
c. Right-click the driver and choose Properties
d. Select the 'Driver' tab to access the Startup Type option
e. Set Startup Type to 'Disabled'
f. Click 'OK' and reboot the system
Yes, Microsoft Security Essentials will provide all the protection you need, and have a much lighter touch with regard to resource demands.
Your Minidump analyses appear below. Give us an update on how things go with the uninstalls and the system seems after that.
Mike
==================================================
Dump File         : 071812-18002-01.dmp
Crash Time        : 7/27/2012 9:17:11 PM
Bug Check String : MEMORY_MANAGEMENT
Bug Check Code    : 0x0000001a
Parameter 1       : 00000000`00041790
Parameter 2       : fffffa80`05bc6b60
Parameter 3       : 00000000`0000ffff
Parameter 4       : 00000000`00000000
Caused By Driver : BHDrvx64.sys
Caused By Address : BHDrvx64.sys+9e373
Processor         : x64
Crash Address     : ntoskrnl.exe+7cd40
==================================================
Dump File         : 071812-23415-01.dmp
Crash Time        : 7/27/2012 9:17:11 PM
Bug Check String : MEMORY_MANAGEMENT
Bug Check Code    : 0x0000001a
Parameter 1       : 00000000`00041790
Parameter 2       : fffffa80`05c26b00
Parameter 3       : 00000000`0000ffff
Parameter 4       : 00000000`00000000
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+7f1c0
Processor         : x64
Crash Address     : ntoskrnl.exe+7f1c0
==================================================
Dump File         : 071812-09625-01.dmp
Crash Time        : 7/27/2012 9:17:11 PM
Bug Check String : MEMORY_MANAGEMENT
Bug Check Code    : 0x0000001a
Parameter 1       : 00000000`00041284
Parameter 2       : fffff8a0`045fb001
Parameter 3       : 00000000`00004d7f
Parameter 4       : fffff781`c0000000
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+7cd40
Processor         : x64
Crash Address     : ntoskrnl.exe+7cd40
==================================================
Dump File         : 071912-14523-01.dmp
Crash Time        : 7/27/2012 9:17:11 PM
Bug Check String : APC_INDEX_MISMATCH
Bug Check Code    : 0x00000001
Parameter 1       : 00000000`77ab138a
Parameter 2       : 00000000`00000000
Parameter 3       : 00000000`0000ffff
Parameter 4       : fffff880`0c71bb60
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+7f1c0
Processor         : x64
Crash Address     : ntoskrnl.exe+7f1c0
==================================================
Dump File         : 072212-13416-01.dmp
Crash Time        : 7/27/2012 9:17:11 PM
Bug Check String : CRITICAL_OBJECT_TERMINATION
Bug Check Code    : 0x000000f4
Parameter 1       : 00000000`00000003
Parameter 2       : fffffa80`12b3fb30
Parameter 3       : fffffa80`12b3fe10
Parameter 4       : fffff800`03582510
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+7f1c0
Processor         : x64
Crash Address     : ntoskrnl.exe+7f1c0
==================================================
Dump File         : 072512-19032-01.dmp
Crash Time        : 7/27/2012 9:17:11 PM
Bug Check String :
SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION
Bug Check Code    : 0x000000c1
Parameter 1       : fffff980`52934fe0
Parameter 2       : fffff980`52934a26
Parameter 3       : 00000000`001dc028
Parameter 4       : 00000000`00000032
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+7f1c0
Processor         : x64
Crash Address     : ntoskrnl.exe+7f1c0
==================================================
Dump File         : 072512-26348-01.dmp
Crash Time        : 7/27/2012 9:17:11 PM
Bug Check String :
SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION
Bug Check Code    : 0x000000c1
Parameter 1       : fffff980`868defe0
Parameter 2       : fffff980`868de746
Parameter 3       : 00000000`000fc028
Parameter 4       : 00000000`00000023
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+7f1c0
Processor         : x64
Crash Address     : ntoskrnl.exe+7f1c0
==================================================
Dump File         : 072612-11544-01.dmp
Crash Time        : 7/27/2012 9:17:11 PM
Bug Check String :
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
Bug Check Code    : 0x1000007e
Parameter 1       : ffffffff`c0000005
Parameter 2       : fffff880`01a2b896
Parameter 3       : fffff880`009a91e8
Parameter 4       : fffff880`009a8a40
Caused By Driver : tdx.sys
Caused By Address : tdx.sys+1861e
Processor         : x64
Crash Address     : tdx.sys+f896

Security cameras with blue screen

Similar Messages

Maybe you are looking for