Security Code Nokia 1208
what is the security code of nokia 1208 , i have tried 12345 but code error
If that code does not work then it has been changed by someone.
You will have to take the phone to a nokia care point to get the code reset.
Find your nearest here:
http://europe.nokia.com/support/repair-and-recycle/repair/care-points
Similar Messages
-
Reset security code Nokia Asha 309
How to reset security code Nokia Asha 309. Please help me.
Default code is 12345. If you have set your own but don't remember than it can be reset ONLY thru' Nokia Care . A proof of ownership (Bill / Invoice) may be required.
-
hellooo
I have a nokia 5300, but forgot the security code and has not turn on the mobile, because Asks the code!
Someone help me?
urgente
thanksThe factory preset code is 12345. If you have changed it to any other number, you will have to visit a Nokia service point to have the code reset.
-
Security code - Nokia 206 Dual SIM
Hello,
I'm having trouble with my Nokia 206 Dual SIM mobile.
My kid changed the security code, and now she can't remember what it is. I've searched the manual, support sections and forums, but most of the solutions I can find suggest taking the phone to a Nokia Care Centre. Unfortunately, I have no idea where to find one of these near Brisbane.
Another suggested option is to send it by post to Nokia Care Direct, but this seems ridiculously unnecessary for what should be a simple passcode reset, not to mention expensive.
I've already taken it to a Telstra store, a Virgin store and a mobile repair store, but all were left scratching their heads.
In the case of a forgotten iPhone passcode it's easy enough to restore the device, so I'm sure that I must just be missing something glaringly obvious. I don't mind losing my data, but I can't even figure out how to perform a factory reset.
Any help to regain control of my phone will be greatly appreciated.
Cheers,
Raj
Solved!
Go to Solution.Hi Dveterant_1,
Welcome to the Microsoft Mobile Community.
Are you trying to reset the phone, but you can't as it's asking for a security code? Or are you unable to access your Asha 206 as it's asking for a security code? In case you've missed @singhnsk's post, the only way to have it fix is to reinstall (flash) its software in Care Points. See: FAQ - I have forgotten the security code for my Asha.
Note: After flashing, all the personal data (contacts, calendar data, etc.) in the phone may be deleted. BTW, the link is intended for the United Arab Emirates. You can visit your local support page for future reference. See below link:
• Local support
Hope this helps. -
Forgotten security code - Nokia C7
how to unlock nokia c7 if I forgot my lock code? phone code 059B899
Moderator's note: The subject was amended as we provide a more topic-related one so others can easily search for the same concern.robertinio,
Welcome to Nokia Discussions
If you are referring to the PUK code or the device sim unlock code, please contact your network provider.
If you are referring to the device security code, please contact your local nokia care hotline. You may get contact information for Nokia hotlines at this page http://www.nokia.com/global/support/locations
Good luck
Moderator's note: The subject was amended as we provide a more topic-related one so others can easily search for the same concern. -
Forgotten Security Code - Nokia 701
i am using nokia 701 and i am forgot restore security code
please help
Moderator's Note: The subject was amended as the post was moved the most appropriate board.
Solved!
Go to Solution.Visit Nokia Care facility with proof of purchase for it to be reset to default of 12345.
Happy to have helped forum in a small way with a Support Ratio = 37.0 -
Forgotten Security code -nokia 8800 arte carbon
hi i forgot my security code on my nokia 8800 arte carbon can u tell me how to restore the code to default 12345 or oder
Moderator's note: The subject was edited as we provide a more detailed subject so others can easily search for the same topic.hi mate, you will need to visit your nearest Nokia Care location with proof of ownership, for them to reset the security code for you.
Moderator's note: The subject was edited as we provide a more detailed subject so others can easily search for the same topic. -
i have for got my security code, so can not use.
Any idea on how i can find this code
Message Edited by noslien on 01-Feb-2008 07:28 AMNEVER post your imei number, this doesnt help anyone in locating your security code.
if you've changed it from 12345 then you could try formating your phone or reinstalling the firmware and if that fails, take it to a nokia repair center i'm sure they'll glady help.
Message Edited by viper on 31-Jan-2008 11:16 PM
Blackberry Bold -
I Forgot my Security Code Nokia 5228 HELLPP !
So Good afternoon, Let's start with everything, then a colleague of mine gave me the nokia 5228 just do not remember the security code, then liked to help me because it is the phone that I like (:
Thank you,
Rest of good afternoon =)Hi Ykeda,
Thanks for your post and welcome to the Nokia forum.
In order to fix this issue, I would advise you to visit your local nokia care point. Your phone will be reseted to the default code "12345".
To retrieve your lost themes (preinstalled), I would suggest you to reinstall your software via Nokia suite.
Let us know how you get on and feel free to post any other questions you may have.
Regards,
Pfrancoise
If this post has helped you to solve this issue, please press the "accept as solution" icon. Kudos would always be appreciated. -
Security code Nokia Communicator 9300i
Hi,
Last time I used my Nokia Communicator 9300i was 3 years ago.
I'm going on Holiday to Thailand and like to use my old phone again.
Unfortunately I forgot my security key which is asked after starting.
I already format my phone (Ctrl+Shift+F) and searched the internet for options like master key generators, all without success.
I really like to use my phone, what could I do?
Sjorsnothing you can do unfortunately mate. only other thing i can think of is to take your phone along with proof of ownership to your nearest Nokia Care location, but as it is old hardware i don't think they can assist you.
-
how can i change my security code nokia asha 306...i fogot the old one
Solved!
Go to Solution.There seems to be some confusion in your post between Nokia lockcode with default value of 12345 unless altered by user and inputting NUC = Network Unlock Code where repeated presses of the "*" (star) key are used to input pw+.
Whilst master codes are no longer applicable to recent Nokia devices, presumably you used device IMEI to generate, which is usualy upon label under battery and this will be the same serial number as requested by support.
Happy to have helped forum in a small way with a Support Ratio = 37.0 -
While i was using my Nokia 1208 last night, it spontaneously turned off. When i turned it back on and typed in my PIN, it requested a security code. The default 12345 wouldn t work and i have never changed the code. This is the 2nd time this has happened to me and the first time it was just impossible to fix it so i bought a new 1. Can some please help or post of you have had a similar problem!
if the default code is not 12345 the operator must have changed it try calling them
try removing battery for ten minutes 1st then repeat the proccess if that fails call operator
or try the following
1. Get the phone reflashed.
2. On some phones the reset function will also reset the code to 12345.
You could try the second option but no guarantees it will work on your phone. Also, you may lose all your data if you reset the phone so remember to back it up before resetting.
Always remember to backup your phone before performing resets as your data may be lost.
First try these
*#7780# - Restore factory settings - resets all the settings to the default
*#7370# - Reformat your phone
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520 -
Nokia Belle upgrade on Nokia X7 - Security Code er...
I have just upgraded to Belle software but now there is an annoying thing were I keep getting asked for a security code (which I hadn't used previously) on boot up, if you put the default code in it fails(12345,00000), but if you cancel you can still operate the phone normally.
Very odd...Anyone have any fixes for this?
thanx in advance!skyee wrote:
Hi all,
here's our official Q&A on this.
Q: After the update to Nokia Belle, my phone asks me to enter new security code. I do this and get an error message stating “code error”. What should I do?
A: Please try again a few times. There are very rare cases in which the phone incorrectly asks for new a security code but does not accept the entered code. In that situation the problem vanishes by entering any code until the phone stops asking for it. After this, the code you had entered before the update works again normally.
Br,
yvonne
my E7-00 is asking for a security code in start up, not for a new security code , can i treat it the same ? knowing that i was using a different code than the default before the update.
please advice.
Haikal -
Set security code in nokia c5 05
How can i set an security code in my nokia c5 05? I want my mobile to ask for an password when i press the lock button.
Have pasted the link to the User Guide in the post above ..
http://nds1.nokia.com/phones/files/pdf_guides/devices/C5-05/Nokia_C5-05_UG_en_IN.pdf -
How to lock keypad using security code in nokia C6...
Can any help me out to lock keypad using security code for Nokia C6??
bobby_33353 wrote:
Can any help me out to lock keypad using security code for Nokia C6??
Can any help me out to lock keypad using security code for Nokia C6??
Maybe you are looking for
-
Acrobat X Pro won't open. Even after a reinstall - what can I do?
My Acrobat X Pro won't open - even after a reinstall. What can I do?
-
TS1702 How to enable my apple I'd I've already reset my password like 5 times
Please help me I can't download games or anything
-
Advance with Special GL Indiactor
Hi All, My Client wants to post travel advance with special GL Indicator (Advance). I have assigned GL Account (100000) with special GL indicator to advance symbolic account. When i try to post the document in T code PRRW it is giving error message
-
How do I locate the personal dictionary on CS6 MAC?
I need to edit the personal dictionary on Dreamweaver CS6 on a MAC (OSX MAVERICK) . I have seed several ways to find it on a PC and trawled though all the folders and done many searches but to ho avail. Any suggestions? Yes I did search the forum
-
What are Sony Vegas Pro 9 "commands" for?
I have a question about SVP9. (Sony Vegas Pro 9)What are literal "commands" (shortcut key by default is "C") for Sony Vegas?I have no Idea what they do, but when i search the question, I get things about the other kind of command. (ex. Split.)