Security Code on a BB5 Phone

Hi!
I have a Nokia 5200 phone but i've lost the security code... Can somebody tell me some solution for this problem...???
Thank U...

For a service centre, check the Nokia web site for your country, under "support".
Before you do that, if you personally have not changed the security code, there is something else that you can check:
I have recently heard that some operators change security codes when they apply SIM-locks. If they do this, the code will appear on the label on the box containing all of the info like the IMEI numbers; though not necessarily shown as a security code. That would be too easy!
In the example I say, the label on the box of an operator-variant Nokia phone had an extra code close to the IMEI number which was an operator-changed security code.Message Edited by mccbleue on 25-Sep-200705:22 PM

Similar Messages

Weird pocket dialing AND security code does not keep phone from waking to web pages, iTunes, etc.

I got an iPhone on my Verizon contract this past November. It appears to be a lemon. Not only does it pocket dial repeatedly and often but it wakes to a variety of apps with no apparent logic. I am getting really weary of the mess involved...and I am not even getting into upside down pix when emailed.
I put on a security key and that has no impact whatsoever.
Anyone have any ideas? I am using the latest iOS.

Don't know if this will help, but take look at: http://www.completedigitalphotography.com/?p=373 and http://www.apple.com/downloads/macosx/automator/photoshopactionpack.html

Read this if you need a security code (Sticky)

Hi Everyone!
I have seen a few posts asking "What is my security code?". So I thought I would make this post. Basically most Nokia phones all use the same security code by default, this is 12345. All phones are set with this code from the factory and will stay using 12345 until it is changed.
If you have changed your security code from 12345 then you would normally need to take your phone into a Nokia Service Point. Here an authorised engineer would reset the code back to its default of 12345. You can find your nearest Nokia Service Point on this page:
www.nokia.com/repair
Unfortunately there is nothing that can be done other than visit an engineer if you forget the security code , they will need to reset the code to the factory default for you.
Cheers
Karim
Message Edited by vandelay on 08-Oct-2008 02:02 PM

There have been some reported cases where operators have changed security codes on some phones.
In these cases, the security code will be shown on the product information label on the box, usually close to the IMEI number. This number is not always marked as a security code.
If your phone was provided to you by your network operator, will not accept the code 12345, and you are certain that you have not changed it, then it is worth checking the product information label on the box before you go for the Care Point option, just in case.Message Edited by michaels on 29-Nov-2007 10:02 PM
If this or any post answers your question, please remember to help others by pressing the 'Accept as solution' button.

Read this if you need a security code

Hi Everyone!
I have seen a few posts asking "What is my security code?". So I thought I would make this post. Basically most Nokia phones all use the same security code by default, this is 12345. All phones are set with this code from the factory and will stay using 12345 until it is changed.
If you have changed your security code from 12345 then you would normally need to take your phone into a Nokia Service Point. Here an authorised engineer would reset the code back to its default of 12345. You can find your nearest Nokia Service Point on this page:
www.nokia.com/repair
Unfortunately there is nothing that can be done other than visit an engineer if you forget the security code , they will need to reset the code to the factory default for you.
Cheers
Karim
There have been some reported cases where operators have changed security codes on some phones.
In these cases, the security code will be shown on the product information label on the box, usually close to the IMEI number. This number is not always marked as a security code.
If your phone was provided to you by your network operator, will not accept the code 12345, and you are certain that you have not changed it, then it is worth checking the product information label on the box before you go for the Care Point option, just in case.
michaels
Come on micheals There is no need to be an engineer to do that! For Nokia 301 Press "Menu" button. Then select "Settings". Scroll until "Security" and press on it. Finally select "Access codes".
Now select "Change secur. code". Answer "Yes" and you can change your default security code (12345) with another one (mine is 54321 ...)
Hope it helps.
Frank from Rome

There have been some reported cases where operators have changed security codes on some phones.
In these cases, the security code will be shown on the product information label on the box, usually close to the IMEI number. This number is not always marked as a security code.
If your phone was provided to you by your network operator, will not accept the code 12345, and you are certain that you have not changed it, then it is worth checking the product information label on the box before you go for the Care Point option, just in case.Message Edited by michaels on 29-Nov-2007 10:02 PM
If this or any post answers your question, please remember to help others by pressing the 'Accept as solution' button.

Anyone know how to get to the security screen with a " Crashed" phone?

Getting the message "Restore Needed" but it says I can't connect with my Iphone because my phone has a security code. I can't get to the Security code screen on the phone. Anyone know how to get to the security screen with a " Crashed" phone?

Restore the phone on the same computer it was last synced to and it will not require the unlock code.
If you don't have access to that computer you will have to use Recovery mode, which will wipe all content. See: http://support.apple.com/kb/HT1808

N8 - Can't enter security code when trying to unlo...

I can enter my PIN and security code just fine when I turn on the phone and when changing settings. But, when my phone is locked and I have to type security code in to unlock the phone, I can press buttons just fine, complete with haptic feedback and all, but nothing is actually entered into the security code field, rendering my phone useless even for emergency calls until I reboot it.
However, if I disable security code check when unlocking the phone (which means I don't have to enter the security code to unlock the phone), the home screen freezes when I unlock the phone. The screen changes the orientation correctly and I can use the hardware button to call up the task manager, but I cannot press any widgets or buttons on the home screen. If I press the hardware button, the menu won't appear, but I can still use the task manager to open up the menu to select applications and such. At this point the phone unfortunately pretty much craps up. The interface glitches out and the phone becomes unusable until rebooted.
This has actually happened before. The firmware had somehow managed to "downgrade" itself to an older version, so I managed to fix the problem by updating to the newest firmware again. It seems the same trick is not usable this time. The firmware version I have installed is 025.007.
Solved!
Go to Solution.

I've managed to fix the problem.
I tried downloading an app from Nokia Store. The app happened to be a Qt application, which requested me to download and install one item with the actual application. After I installed the application the problem was fixed, although I doubt that was the reason it was fixed.

Keychain security code

hello
i was reset all content of my phone and i didn't receive any sms for security code to verify my phone.
pls advice!
tks

I too have this problem but my number is my iphone 6 and is a 'real' number. i checked it is input in a valid way and i still don't get a flippin sms from Apple! idiots!
what happens if i turn off keychain and then turn it on again? does it remove all my previous information (passwords) or only the new ones I have added to my mac specifically since not being able to activate keychain (it's not been activated for a few months now) or does it retain everything and then resyncs it all when i turn keychain on again? i REALLY don't wanna lose any of my information if i can help it!!!!

Device locked on 'Enter Security Code'

I have a nokia n9. After a "backup" then "restore" setting procedure, the phone is locked with an "Enter security code" interface. But I have never ever set such a security code. Then the phone stucked at this state no mather what possiable code I had tried, even reflashing the Firmware did no use.
This is a serious OS bug, raised & comformerd by others n9 users on official nokia support website.
/t5/Maemo-and-MeeGo-Devices/Nokia-N9-Security-Code/td-p/1190499/page/2
MODERATORS NOTE: E-mail address has been removed. Sharing of personal information is not allowed on the forums. Please do not share sensitive or personal information as it could threaten your personal security.
Attachments:
E4398E26-545C-47D8-890E-70C8CC9CE281.JPG ‏617 KB

Hi Kiiwii,
Welcome to the Nokia forum,
Have you tried 12345 as the security code? as it is the default security code for the device if you have not set your own personal security code.
Sheldrick
Press the 'Accept As Solution' icon if I have solved your problem, Kudos my post if my advice has helped you!

6233 SECURITY CODE ERROR

I entered the Security Code of my 6233 mistakenly a few times ( since I was in haste ) and now, it does not accept the correct security code. All other phone features appear to work fine apart from not being able to be unlocked. Any solutions please ?
Mobile Royale - Latest News, Reviews and Software for Mobiles
Aero Everyday - Aviation News and Insights
GoMobile Forums-The best mobile technology discussions
Please visit http://alifeofmisery.blogspot.com or www.miserylife.tk and help someone smile.
Dreaming of a 5320XpressMusic - 128MB RAM makes up for the 2MP cam !
Solved!
Go to Solution.

No I've found the solution . It is a Nokia default. When you enter the security code wrong for three times, the phone gets into a sleep mode for 15 mins . Keep the phone untouched for 15 mins and reenter the correct code then . Hope this help someone .
Mobile Royale - Latest News, Reviews and Software for Mobiles
Aero Everyday - Aviation News and Insights
GoMobile Forums-The best mobile technology discussions
Please visit http://alifeofmisery.blogspot.com or www.miserylife.tk and help someone smile.
Dreaming of a 5320XpressMusic - 128MB RAM makes up for the 2MP cam !

TS2446 My phone want let me download apps I put the password in then it's say billing options which tell me I have invalid security code

My phone want let me download any apps when I put the password in it take me to billing option which tell me I have the wrong security code and that's the security code that was on the card on the account

iTunes Store: My credit card's security code or zip code does not match my bank's records
http://support.apple.com/kb/TS1646

My i phone 4 is not letting me download apps cus of my billing information everytime i type the correct information it just keeps saying "security code invalid" when i know for a fact its correct

MY I PHONE WILL NOT LET ME DOWNLOAD ANYMORE APPS CUS OF MY BILLING INFORMATION IVE FIXED THIS ERROR SEVERAL TIMES ALREADY & IT STILL TELLS ME "SECURITY CODE INVALID" WHEN I KNOW FOR A FACT IT IS NOT. HELP ME

Contact the card issuer and find out what the problem is.
Was the card issued in the same countryas the store you're trying to use?

3 debit cards, updating, and my phone won't let me download apps or music because it says my security code is invalid no matter what I do. Help!!

I don't know wha to do. When I try to get apps (even free) or music on iTunes (even with my gift card), a notice pops up saying there was a problem with a previous billing purchase, then it takes me to my card info and address and no matter what it always tells me my security code is invalid. I've gone through 3 cards (all worked to purchase items from a store or anything) and I've even updated my phone when i was told that I had to do that before I could download anything. I can't figure out what the problem is. PLEASE SOMEONE HELP!!

From iTunes menu Bar, Store > View Account > Edit "Payment Type" under "Apple ID summary"

My iPad updated and wants a security code. I tried the one from my phone and it doesn't work - I never entered a security code. How can I get in now?

?My iPad updated and now wants a security code for access and I never gave it one. I tried code I used for my phone and it doesn't work. How can I access now?

iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

HT5622 I updated new software on my phone and now can't use it because its asking for a 4 digit security code that I don't know. How do I find this number?

I updated new software on my Apple 4S phone and now can't use it because it requires a 4 digit security code that I don't know. The phone store when I originally bought phone bypassed it for me. How do I find it?

Hey dentallady!
Here is an article that can help you reset this code:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Take care, and thanks for visiting the Apple Support Communities.
-Braden

I put a security code on my phone and cant remember what it is. how do i get my phone working?

I put a security code on my phone and cant remember what it is. How do I fix that problem?

You restore the phone using iTunes. If the code was set after the last time you synced or you do not have access to the computer the phone is synced with, google 'iPhone recovery mode'. You will have to place the phone into recovery mode to restore it.

Security Code on a BB5 Phone

Similar Messages

Maybe you are looking for