Security engine initialization failed. Contact your support representative. Error Code = 0x40000
I've seen a couple of other posts regarding this but no answers as of yet.
Stuck at BIOS/UEFI in a reboot loop. Top left shows Reset: 10Sec (and counts down). Lenovo logo and message:
Security engine initialization failed. Contact your support representative.
Error Code = 0x40000
I've tried the Power/Vol+ combo, tried tapping the Vol-, tried hitting F1 from an external keyboard, removed any memory cards, etc. Nothing seems to work. Is there some BIOS/UEFI update that can be done or a hardware reset to clear this? My 9 year old daughter doesn't care about a security engine, she just wants to play her games and watch videos.
Something else I noticed, the device will not power on unless it is plugged in. If I unplug it after I turn it on, it will continue to stay on (in the reboot loop). If I turn it off, I have to plug it back in before it will turn on again.
Please help!
Other posts:
http://forums.lenovo.com/t5/ThinkPad-slate-tablets/TT2-Boot-Error-0x40000/m-p/1485260#M28302
http://forums.lenovo.com/t5/ThinkPad-slate-tablets/Thinkpad-tablet-2-TPT2-cannot-boot-with-security-...
Did you ever get this resolved? I have the same issue, and the warranty has expired. (My error code is 0xF00482, but otherwise symptoms are identical.)
Similar Messages
-
Hi friends,
i have tried to install ms sql 2012 on windows 8.1 pro 64 bit but it got failed due to the following error 1406 Could not write value to key \SOFTWARE. Verify that you have sufficient access to that key, or contact your support personnel..
I had run the set up file as administrator. I have ony one user account on my laptop. I have seen in the regestry about permission of user. There is full control to the user. I have also tried the solution related to this issue that are available in
this forum and other.
I have also attache the detail.txt log file here
So i am heartily requesting you guys if you have the solution then please post your solution as soon as possible.
Thanks in advance!!!Looks like this is a permission issue with account you logged in in your operating system or account if any you chooses to run you SQL Server installation . Or for executing setup file try using run as administrator.
http://www.sperrysoftware.com/kb/questions/7/How+to+Troubleshoot+a+%22Error+1406%3A+Could+not+write+value...%22+or+%22Error+1406%3A+Could+not+write+InstanceIndex+to+key...%22+error+message
http://support.microsoft.com/kb/913559
Raju Rasagounder Sr MSSQL DBA -
ERROR: Error 1406.Could not write value to key \SOFTWARE\Microsoft\Windows\CurrentVersion\Run. Verify that you have sufficient access to that key, or contact your support personnel.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1406.Could not write value to key \SOFTWARE\Microsoft\Windows\CurrentVersion\Run. Verify that you have sufficient access to that key, or contact your support personnel.Error 1402 | Error 1406 | Acrobat, Reader
Error 1603: A fatal error occurred during installation -
I am trying to install iTunes, and get this error: "Module C:\Program Files\Bonjour\mdnsNSP.dll failed to register. HRESULT -2147024769. Contact your support personnel."
Any ideas on how to fix this error, or get the install to comlete?*complete...
-
When Upgrading on my laptop from iTunes 10.2.11 to 10.5.0 the message I get is: "There is a problem with this Windows Installer Package. Aprogram run as part of the setup did not finish as expected. Contact your support personnel or pacakge vendor.
After reading all these posts, one by one did not resolve my problem until I got the very end. Regardless of what step would resolve your problem, these are the steps I would recomment to everyone for a what seems to be a safe and fool-proof upgrade to iTunes 10.5.
1. Stand alone upgrade to the latest Quicktime version
2. Go to control panel and "change" then select repair to the following applications in the order specified by the post on Oct 27. (Notice I skipped Quicktime because it had been upgrade manually,and Bonjour did not have a "repair" option)
iTunes; Apple Software Update: Mobile Device Support; Apple Applications Support
Some of these applications may not appear if they do not apply to your configuration (no iPhone, or no iPad, or other apple devices).
Once all updated, I did not need to restart nor launch any applications, I simply went straight into the 10.5 upgrade, and where it normally got stuck, this time the installation continued for a while longer until it completed successfully.
Great work everyone who contributed! Thank you very much! -
At the very end of installing iTunes 11.1.1.11 a window appears: "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor." Available choice is click "OK" then "Finish" and install has then failed.
Go to START > ALL PROGRAMS > Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you can't find ASU, go to Control Panel:
XP - Add n Remove Programs
Win7/Vista - Programs n Features
Highlight ASU, click change then Repair. -
Hi,
i am doing one POC for one of the customer. where I have Dummy Domain and I have installed Lync 2013 server std edition and Lync wac server. now i am able to login from workgroup machine via lync 2010 and lync 2013 aslo.
But when I am trying to login from Customer productuion domain machine Lync client login fails but from same machine lync 2010 client is able to login without any issue. when i am trying to login through lync 2013 i am getting this error message.
"Sign-in didn't
work. You didn't get signed in. It might be your sign-in address or logon credentials, so try again. If that doesn't work, contact your support team"
Rgds,
ramesh
Rgds, Ramesh Rawat MCT.Hi,
Please turn on Windows event logging for lync and check the event log on client machine. Please also try manual configuration to test the issue.
Kent Huang
TechNet Community Support -
Hi guys !
My problem is in installation/uninstallation of iTunes:
Could not open key:
UNKNOWN\Installer\Products\9B00314CD581E574FBCE93FE37F2911B\SourceList\Media. Verify that you have sufficient access to that key, or contact your support personnel.
The error appear first time in installation iTunes 10.3.1.55.
The error repeat in QuickTime, Bonjour, Apple Mobile Device Support, Apple Software Update, just changing the green area.
How i fix this ?
Thanks.
PS: Im administrator.Start>Run put regedit and press Ok.
1. Go to the key: HKEY_CLASSES_ROOT\Installer\Products\9B00314CD581E574FBCE93FE37F2911B\SourceLis t\Media
2. Right click in Media folder, select Permissions from the menu.
3. You will see that is no user, on the "Permissions for..." dialog box which appears next, press the "Add.." button and add in the "All"
4. Back on the first "Permissions for..." dialog box, click on each account in the top-list and make sure each has the "Full Control = Allow" and "Read = Allow" permissions
5. Click the "Advanced" button and the "Advanced Security Settings" dialog box appears
6. On the "Permissions tab" enable the checkmark box named "Replace all child object permissions with inheritable permissions from this object", then press the "Apply" button
7. On the "Owner" tab, highlight the "Administrators" name in the lower listbox, enable the checkmark box called "Replace owner on subcontainers and objects" and press the "Apply Button"
In my case, many errors appear before, but i fixing 1 by 1 and installation completed. Try and tell me later. -
I am trying to install iTunes on my PC (using Windows 8.1), but I get this error: "There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor." The iTunes file (64-bit) I am trying to install, is named "iTunes64Setup.exe". What seems to be the problem? Help!
Hey madnest,
Thanks for the question. After reviewing your post, it sounds like you are having difficulty installing iTunes in Windows. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
Issues installing iTunes or QuickTime for Windows
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
I keep getting the following error message when I try to update my itunes, "There is a problem with this windows installer package. Aprogram run as part of the set up did not finish as expected. Contact your support personnel or package vendor."
Yes, I had found a similar solution also. I'm running XP Pro, SP3. I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair. Then run the 10.5 exe.
While the programme updated from version 8 of iTunes, my new iTunes is now a mess. Not all of my music was in the same folder previously but it all showed up on iTunes. Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing. I haven't begun to work on that. -
I am trying to install itunes 10.5, but during the download I get the following message, "There is a problem with this Window Installer Package. A program required for this install to complete could not be run. Contact your support personanal or package vendor." If this is my personal computer and was able to upgrade to the previous version (pre 10.5), why not now? What is my "package vendor"? And what is it I need to do to fix this? The message is unclear. Unfortunately, I deleted my itunes program, thinking that in doing so, 10.5 would finally load. Now I have no itunes on my computer and unable to sync my iphone. Help!
Thanks - RickHi Rick,
by "repair" I mean I went to the control panel, option - programs and features, and in the list of all my installed programs I selected "Apple Software Update". On top of the screen you find the options Uinstall, Change and Repair. I clicked the repair button and that did the trick. After the repair I could uninstall the program. I also uninstalled iTunes, Apple Application Support, Apple Mobile Device Support en Bonjour, thus all Apple programs. Then I installed iTunes 10.5 again and everything went fine.
Success,
Peter -
5, it says, "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor." I have Windows XP and I need help.
After reading all these posts, one by one did not resolve my problem until I got the very end. Regardless of what step would resolve your problem, these are the steps I would recomment to everyone for a what seems to be a safe and fool-proof upgrade to iTunes 10.5.
1. Stand alone upgrade to the latest Quicktime version
2. Go to control panel and "change" then select repair to the following applications in the order specified by the post on Oct 27. (Notice I skipped Quicktime because it had been upgrade manually,and Bonjour did not have a "repair" option)
iTunes; Apple Software Update: Mobile Device Support; Apple Applications Support
Some of these applications may not appear if they do not apply to your configuration (no iPhone, or no iPad, or other apple devices).
Once all updated, I did not need to restart nor launch any applications, I simply went straight into the 10.5 upgrade, and where it normally got stuck, this time the installation continued for a while longer until it completed successfully.
Great work everyone who contributed! Thank you very much! -
Hi,
I just try to install the setup download from apple website for iTune and iCloud.
During the installation, there was error message prompt out "There is a problem with this Windows installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."
I am using Window 7 32 bit. I have try several time for install, but the result is getting same error message.
Anyone can help on this??????
Thanks.
JustinI have also tried extracting the individual components to the temp file and attempting to install them individually despite being unable to remove the previous install of Apple Software Updater. The outcome, both Apple Software Updater and itunes encountered the same error message during the install process.
-
I am trying to update to iTunes 10.5 and am getting a Apple Software update error. "There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. ?? I can't uninstall the Apple Software Update from my Control Panel. It states "Fatal error during installation" Please HELP!!!
I am experiencing the exact same issue during the installtion process for iTunes 10.5.
I uninstalled all Apple components but when I attempted to uninstall the Apple Software Update I received the same message: "Fatal error during installtion." I was able to repair the Apple Software Update but still could not install iTunes 10.5 afterwards.
I have tried everything that I could find on these discussions pages as well as other suggestions on third party sites. I continue to receive the error message: "There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.
I was able to uninstall and reinstall QuickTime 7.7.1. During the reinstalltion process I received the same message (There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.) But after clicking "OK" the installtion process was succesful. PLEASE HELP! -
I am trying to update my iphone 4, but in order to do that I need to update itunes. I am unable to do this, or update quicktime. I get an error message that says
"A program required for this install to complete could not be run. Contact your support personnel or package vendor." I have a dell running windows 7Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?
Maybe you are looking for
-
How to pass dynamic selection to logical databse using ldb_process function
dear friends, can anybode tell me how to pass dynamic selection to the logical database when i m using LDB_PROCESS function module. however, in EXPRESSIONS paramter of the function module i m passing the selecti-option, it is p
-
How can I ensure that the audio sample rate of my capture preset matches?
Hi 1. I have found that none of my ten projects has sound, although audio meters & settings moves up & down. Simultaniously, canvas displays that In: Not Set- & Out Not Set. Below those reads: Video V1: 00:03:42;13 Audio A1: 00:03:42;13 A2: 00:42;13.
-
Reversal of posted ED revaluation
Hi all, I have a question regarding wrong posting of excise duty revaluation. My customer posted double FI and excise document of revaluation after change of excise duty exchange rate and we need to reverse at least one of double documents but within
-
Someone save me from my confusion. I'm familiar with the classic use case of NAT/PAT, where internal hosts use many-to-one or one-to-one nat when going outbound. What I'm not as familiar with is what can I use if I have a 10,000 port range that exter
-
[SOLVED] I'm lost halfway between systemctl and netctl in Wifi Setup
I'm working through the wiki pages Wireless Setup, to wpa_supplicant, and now NetCtl for the past three days. My progression is not continuous--I've jumped around. I can get connected, but I'm not sure what's managing that connection. I'm lost. I'm s