Security exceptions not configurable after release 31 (bug number 1042889 is not fixed)

We are running Firefox 31 32 and 33 on different machines on windows/XP (updated until end of support).
Our router has an expired certificate. On the machines updated to Firefox 32 or above the security popup screen does not show. Instead we just get the corresponding error message, when trying to access the router's homepage.
I looked at the support thread "Secure Connection Failed- can not confirm security exception (since update to 31)" .
The posted solutions do NOT work!
Chrome and even IE work fine.
Please take a look at what was changed and reverse it.
Or add a possibility to configure exceptions to the always accessible options tab "security", Having only 262 users with the same problem, means all others having the problem just moved to other browsers.
For someone using Firefox since the beginning and liking it this will be a hard step, so I raise the issue again.
No, buying a new router is NOT an option, because it manages our network storage and printers and the rule is "never fix a running system".

hello, the fix of the bug number you have referred to has already landed in firefox 31.2.0 esr and will land in the regular firefox release channel in case there is an update to firefox 33 or else in version 34.

Similar Messages

  • My iPad orientation is not working after the IOS 8 update.  Please fix this bug!

    my iPad air orientation is not working after the IOS8 update.  Can you fix this bug? Thx

    Did you try a reset?
    Restart / Reset
    http://support.apple.com/kb/HT1430

  • HT1338 Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available

    Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available

    Sorry for being unclear.
    When I am using the update in the App Store App, there will be a list of various applications that have updates to be installed (Final Cut Pro will be in this list).  I will already be logged in with the Apple ID I use for everything (my dev account).  I will be able to update all of the other various applications needing updating except for my Final Cut Pro.  When I click the update button next to the FCP update, it will give me an error saying  "This download is not available for this apple ID either because it was bought by a different user or the item was refunded or cancelled"
    I have not had any applications refunded or cancelled and this has only happened since my update to Yosemite.  FCP was working fine until the upgrade.  Is there anything that can be done to fix this?

  • InDesign CS5 is not opening after deactivation/activation. How can I fix this? Illustrator and Photoshop open and are working fine. Please help!

    InDesign CS5 is not opening after deactivation/activation. How can I fix this? Illustrator and Photoshop open and are working fine. Please help!

    First of all, thank you for replying so promptly to my posts this morning!
    I can't remember how I got the software on his computer, but I'm pretty sure it wasn't through migration assistant.
    I was looking into doing an uninstall of InDesign and a fresh install. However, I initially downloaded the CS5 suite digitally and I can't find out how I am able to perform a fresh install of InDesign. Do you know where I find this info or gain access to download just InDesign again? I can't seem to find anything in my Adobe account that shows where I might do another download.

  • Airport: Not Configured after 10.4.7 update

    I just bought a new macbook 2.0Ghz, proceeded through the first-time installation wizard setup my wifi settings, and everything worked fine.
    At first boot in macosx i had my wifi working and i was able to browse and download things.
    I installed the 10.4.7 macosx update, restarted, then lost my wifi connection.
    The signal indicator reads
    Airport: Not Configured
    and in the network settings under 'Network Port Configuration' I see a greyed out 'AirPort' configuration. I can"t enable it. I can't add a new one either since the only choices are Bluetooth, Builtin firewire/ethernet, 6 to 4
    I found a knowledge base article describing a similar problem:
    http://docs.info.apple.com/article.html?artnum=303437
    But the described workaround doesn't seem to work.
    I also tried to reinstall the 10.4.7 update using the combo installer, the issues remain.
    I ran also the permission repair utility at various stages in the process, it never detected any errors.
    In the System Profiler under network/Airport section, i see:
    Airport Card Information:
    Type: AirPort Extreme [..]
    Locale: Worldwide
    Firwmare: 0.1.24
    Current Wireless Network: AirPort is currently turned off
    I know the card is there and working, since linux happily uses it when i boot in linux.
    Has anyone any clue about what's happening ?
    Is there a simple 'enable' button somewhere, or is that a known isse with 10.4.7 updater, how can i revert to 10.4.6 then ?
    Thanks a lot!
    Macbook   Mac OS X (10.4.7)  

    It's actually a bit more weird:
    When stepping through the first-time boot wizard, it asks to select the wifi essid from a list, the scan is ok and shows my network, and i type the WEP key in the box, click next. The 'Configuring your computer' blinks then the setup goes on and asks for my .Mac account and so on.
    After the wizard completes i'm able to surf the web and connected BUT !
    The signal meter is always empty and clicking on it states 'Airport: Not Configured'. When i open the network preferences it says under 'current status' that i'm using the builtin ethernet device ??!!
    The IP and dhcp re-lease stuff work in the UI even if it's clearly not the builtin ethernet card that i'm using since the IP is from the wifi router, and there is no cable plugged in, and i can access the internet.
    No mention of Airport port in the setup, so i can't configure it.
    As soon as i restart the connection is gone, and the setup created by the first-time wizard is gone.
    So the situation is now i have a 10.4.6 os with no airport..

  • PO not changable after Release

    Dear Friends,
    We have PO Release Strategy by A , B, C.
    we want to restrict if PO Released by A  and B  then A cant unrelase the PO wihtout B Release and the same  with B & C
    at present if PO released A , B and C ... A can unrelease the PO and amending the same...
    kindly advice the same
    awaiting for ur kind reply
    Thanks
    Rajesh G

    >
    Rajesh_k1975 wrote:
    > Thanks for your kind reply. our Release Indicator as follows
    >
    > 1     Cannot be changed
    > 2     Changeable, no new determination of strategy
    > 3     Changeable, new release in case of new strategy
    > 4     Changeable, new release in case of new strat. or val. change
    > 5     Changeable, new release if new strategy/outputted
    > 6     Changeable, new rel. if new strat. or value change/outputted
    >      Changeable, new release in case of new strategy
    >
    > Release code       
    >
    > 50  A          0
    >
    > 51 B           0
    >
    > 52  C          9   
    >
    >
    > if i am putting  51 B  1  then after release B  PO not coming to C for release.
    >
    > please advice how can to get
    >
    > regards,
    >
    > Rajesh G
    Sorry but I am a bit confused Rajesh...actually as per your initial issue we had asked for your Release pre-requsite...how it has been maintained in your release strategy...
    Cn you please let us know what is your actual issue?
    Regards,
    Indranil

  • "Time machine not configured" after yosemite clean install

    I'm on a MBP early 2011, 16gb Ram, Seagate 500gb used to back up with Time Machine. I was doing manual backups once a month. Having wifi problems like everyone else and general slowdowns on the machine even before the regular install of Yosemite (on top of Mountain Lion, on top of Snow Leopard) I decided to do a clean install. Start fresh. Followed all the directions. But,little did I know that by changing my user name (not deliberately) on my brand new OS, I don't have access to TM. At least that's what I think is up with this "TM not configured"
    How should I proceed?
    Can I configure the drive now with my new username and still have access to my files? I wanted to bring over some of them, not all of them. If it's possible to do this, and I do, will I have all kinds of permissions or other problems? Will I lose my old backups if I configure it?
    Or should I just start over with another kind of clean install? It's only been a couple of days.If I restored from the backup or whatever options there are, am I actually reinstalling the problems I was trying to eliminate? The upgrade to 16gb ram was part of my initial troubleshooting.
    Other options?
    Thanks!

    My family upgraded to Yosemite on our 3 Macs four days ago: on an iMac, a MacBook Pro, and a MacBook Air, all three Macs from early 2014.
    In Mavericks there was never any trouble with the Time Machine. But now on all three Macs, the TM doesn’t function properly.
    1) on entering TM, the Restore and the two Arrow buttons for selecting the date are dimmed out 90% of the time; nothing can be done, for example, clicking on the Finder folders or files and so on is impossible.
    2) sometimes, however, only the Restore button is dimmed out, or vice versa, only the two Arrow buttons.
    3) on two occasions, no buttons were dimmed out, but on the very first click, all the buttons were again dimmed out
    4) on the iMac and the Mac Book Pro, thank God, the backups still seem to be working; however, on the MacBook Air, a „preparing backup“ message just keeps on running and running.
    The TM is a major feature of OS X that Apple pushes hard in its ads. Hopefully this means we’ll soon have an update. As a normal Mac user, I would find it difficult to apply any more exotic workaround solutions that some Mac experts might offer. My patience and ability to troubleshoot doesn’t go much beyond David Pogue’s latest OS X manual.
    Anyway, a last more point: the previous TM was a thing of beauty, and I really enjoyed being sort of shot into space with the stars, like Dante on his way to the Empyrean; but now, on entering the TM in Yosemite, it looks like the Finder has fallen into an ugly pool of mud.
      Thanks for any help or feedback you can offer.

  • Ipad not connect with computer. error number (0xE8000084), ipad not connect with computer error number (0xE8000084)

    ipad not connected to computer. erreo number (0xE8000084)

    Hello Mohamed Abdo,
    It sounds like you are unable to connect your iPad to the computer because you get this error code when you try. I would use the troubleshooting for these types of errors from the following article:
    iOS: Unknown error containing '0xE' when connecting to a Windows PC
    http://support.apple.com/kb/TS3221
    Start with these steps, and there are additional steps in the article if you need them:
    1. Restart your computer.
    2. Install the latest version of iTunes.
    3. Verify that your computer meets the minimum system requirements. iOS devices require the following minimum version of Windows:
    Windows XP Service Pack 3
    Windows Vista
    Windows 7
    Windows 8
    4. Download and install any available software updates from Microsoft.
    5. Connect the device directly to your computer; not to an external USB hub. Find out if your computer has USB 2.0 ports.
    6. Check that the Dock Connector or Lightning Connector on both the device and cable are clean of any lint or other debris. If possible, connect your device using a different Apple 30-pin to USB cable or Apple Lightning Connector to USB cable.
    7. Disconnect other USB peripherals from your computer, with the exception of your keyboard and mouse. After disconnecting these peripherals, restart your computer, connect your device, and open iTunes.
    8. Connect your device to a different USB port on your computer.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • After restoring definitions iphone 3gs does not works, after restoring definitions iphone 3gs does not works

    after restoring definitions iphone 3gs does not works

    What do you mean by "restoring definitions"?
    What EXACTLY is your problem?
    "does not works" is just a bit vague.

  • IMovie will not open after ram upgrade. How can I fix this?

    I updated the ram on my computer by myself from 2gb to 4gb. Everything seemed to work fine, yet when I go to open imovie, it will not open after endlessly bouncing on my dock. I have verified disk permissions. Repaired disk Permissions. Tried replacing iMovie with the iMovie backup from my time machine. Cleared the system cache. Tried reinstalling it using the ilife 11 disk. Tried installing the previous ilife 09 version. Reinstalled snow leopard and did a time machine back up. Placed the old ram back in the computer. All this things done with no success.
    DOES SOMEBODY HAVE ANY IDEA ON WHAT I COULD DO?
    regards
    Lloyd

    Hi
    My first two thoughts
    • Faulty RAM - There are programs that can test this as Tech-tools (buy or in Apple Care pac)
    • Wrongly inserted RAM - Can be tricky and sometime not obvious - everything's looks OK but in certain situations it just randomly don't work.
    Take out the new RAM and try Your Mac without it to see that it's still OK to start with and then very carefully re-install RAM and now be very careful to see that it snaps in exactly as it's intended to.
    Yours Bengt W

  • Bug : number of update not sync after install

    Hi,
    I just update Creative cloud and the software proposed right away for new update. I start by downloading only Photoshop but the number display in the bar and the application is not updated. See following screenshot.
    Regards,
    Vincent

    Thanks Jason
    I have no any views. I just only have supplier catalog and master catalog.
    Any hints?
    Please help me.
    Thank you in advance.
    regards,
    Theerat
    Edited by: Theerat Aramkul on Jun 25, 2009 10:47 AM

  • PR Item Level Release WF not working after Release Strategy change

    Hi Experts,
               I did PR item Level Release Standard Work flow and it was working fine now due to client requirement we changed the release strategy and now when the PR workflow triggers it gives the Below mentioned error.
    I really don't understand y after changing the release strategy workflow is not working and giving the following error.
    Even if i restart the workflow in SWPR the same error is occuring.
    Exception occurred    - Error when starting work item 000000390118
    PROCESS_NODE     - Error when processing node '0000000003' (ParForEach index 000000)
    CREATE                   -  Error when creating a component of type 'Step'
    CREATE_VIA_WFM  -  Agent determination for step '0000000003' failed
    EVALUATE_AGENT_VIA_RULE - Error in resolution of rule 'AC00000148' for step '0000000003'
    AC00000148             -  Object type 'TS' not valid
    Executing flow work item   - Work item 000000390118: Object FLOWITEM method EXECUTE cannot        be executed
    Executing flow work item   - Error when processing node '0000000003' (ParForEach index 000000)
    Regards,
    Hari

    Hello Hari,
    please set a breakpoint at function module
    ME_REL_GET_RESPONSIBLE
    and see what happends in section
        CASE t16fc-frgwf.
    * keine Ermittlung
          WHEN space.
            RAISE nobody_found.
    * Ermittlung über T16fW
          WHEN '1'.
    If using the T16FW-table, it should go to '1', otherwise it may that a user exit under '9' is used. So please check this.
    Best wishes,
    Florin

  • Restricted Group setting in GPO is not configured after domain join

    Hi all,
    I'm configuring a GPO as part of a test environment in which I create a custom GPO for within an OU, it configures fine and I can RDP (using the settings in the GPO) to the domain controller. However, when I add a computer to the AD domain, I cannot RDP
    using the user, I can log on locally though. After looking into it further I've found that the setting I have applied to my Restricted Group is not being brought across properly. The group I need is in the restricted group but it is not appearing as a member
    of Administrators (in the "Member of") column. I have an 'X' in red next to the group giving the usual check win logon log file. The content of which is:
    Make a local copy of \\shire6.vce\sysvol\shire6.vce\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\Machine\Microsoft\Windows NT\SecEdit\GptTmpl.inf.
    GPLinkDomain 
    Make a local copy of \\shire6.vce\SysVol\shire6.vce\Policies\{6D41C716-CDD9-457E-AB89-02C4192226FF}\Machine\Microsoft\Windows NT\SecEdit\GptTmpl.inf.
    GPLinkOrganizationUnit 
    Process GP template gpt00000.dom.
    This is not the last GPO.
    Monday, April 27, 2015 3:36:03 PM
    Copy undo values to the merged policy.
    ----Un-initialize configuration engine...
    Process GP template gpt00001.inf.
    Monday, April 27, 2015 3:36:03 PM
    ----Configuration engine was initialized successfully.----
    ----Reading Configuration Template info...
    ----Configure User Rights...
    Configure S-1-5-32-545.
    remove SeInteractiveLogonRight.
    Configure S-1-5-32-551.
    remove SeInteractiveLogonRight.
    Configure S-1-5-32-555.
    remove SeRemoteInteractiveLogonRight.
    Configure S-1-5-21-330840483-2018858548-1314766947-1104.
    add SeInteractiveLogonRight.
    add SeRemoteInteractiveLogonRight.
    Configure S-1-5-32-544.
    User Rights configuration was completed successfully.
    ----Configure Group Membership...
    Configure SHIRE6\System_Admins.
    successfully added object to Administrators.
    new memberof tattoo list: *S-1-5-32-544,
    Group Membership configuration was completed successfully.
    ----Configure Security Policy...
    0
    Undo value for group policy setting <MinimumPasswordLength> was saved.
    0
    Undo value for group policy setting <PasswordHistorySize> was saved.
    42
    Undo value for group policy setting <MaximumPasswordAge> was saved.
    0
    Undo value for group policy setting <MinimumPasswordAge> was saved.
    1
    Undo value for group policy setting <PasswordComplexity> was saved.
    0
    Undo value for group policy setting <RequireLogonToChangePassword> was saved.
    0
    Undo value for group policy setting <ClearTextPassword> was saved.
    Configure password information.
    0
    Undo value for group policy setting <LockoutBadCount> was saved.
    0
    Undo value for group policy setting <ForceLogoffWhenHourExpire> was saved.
    Configure account force logoff information.
    System Access configuration was completed successfully.
    LSA anonymous lookup names setting : existing SD = D:(D;;0x800;;;AN)(A;;0xf1fff;;;BA)(A;;0x20801;;;WD)(A;;0x801;;;AN)(A;;0x1000;;;LS)(A;;0x1000;;;NS)(A;;0x1000;;;S-1-5-17)(A;;0x801;;;AC).
    0
    Undo value for group policy setting <LSAAnonymousNameLookup> was saved.
    Configure LSA anonymous lookup setting.
    Configure machine\system\currentcontrolset\control\lsa\nolmhash.
    Mismatch       - machine\system\currentcontrolset\control\lsa\nolmhash.
    Undo value for group policy setting <machine\system\currentcontrolset\control\lsa\nolmhash> was saved.
    Configuration of Registry Values was completed successfully.
    Configure event audit settings.
    0
    Undo value for group policy setting <AuditPrivilegeUse> was saved.
    0
    Undo value for group policy setting <AuditAccountLogon> was saved.
    Audit/Log configuration was completed successfully.
    ----Configure available attachment engines...
    Configuration of attachment engines was completed successfully.
    ----Un-initialize configuration engine...
    this is the last GPO.
    Make a local copy of \\shire6.vce\sysvol\shire6.vce\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\Machine\Microsoft\Windows NT\SecEdit\GptTmpl.inf.
    GPLinkDomain GPO_INFO_FLAG_BACKGROUND )
    Make a local copy of \\shire6.vce\SysVol\shire6.vce\Policies\{6D41C716-CDD9-457E-AB89-02C4192226FF}\Machine\Microsoft\Windows NT\SecEdit\GptTmpl.inf.
    GPLinkOrganizationUnit GPO_INFO_FLAG_BACKGROUND )
    Process GP template gpt00000.dom.
    This is not the last GPO.
    Monday, April 27, 2015 3:42:06 PM
    Copy undo values to the merged policy.
    ----Un-initialize configuration engine...
    Process GP template gpt00001.inf.
    Monday, April 27, 2015 3:42:06 PM
    ----Configuration engine was initialized successfully.----
    ----Reading Configuration Template info...
    ----Configure User Rights...
    Configure S-1-5-21-330840483-2018858548-1314766947-1104.
    Configure S-1-5-32-544.
    User Rights configuration was completed successfully.
    ----Configure Group Membership...
    Configure SHIRE6\System_Admins.
    old memberof tattoo list: *S-1-5-32-544,
    object already member of Administrators.
    new memberof tattoo list: *S-1-5-32-544,
    Group Membership configuration was completed successfully.
    ----Configure Security Policy...
    Configure password information.
    Configure account force logoff information.
    System Access configuration was completed successfully.
    LSA anonymous lookup names setting : existing SD = D:(D;;0x800;;;AN)(A;;0xf1fff;;;BA)(A;;0x20801;;;WD)(A;;0x801;;;AN)(A;;0x1000;;;LS)(A;;0x1000;;;NS)(A;;0x1000;;;S-1-5-17)(A;;0x801;;;AC).
    Configure LSA anonymous lookup setting.
    Configure machine\system\currentcontrolset\control\lsa\nolmhash.
    Configuration of Registry Values was completed successfully.
    Audit/Log configuration was completed successfully.
    ----Configure available attachment engines...
    Configuration of attachment engines was completed successfully.
    ----Un-initialize configuration engine...
    this is the last GPO.
    Any help would be much appreciated.
    Thanks,
    Adrian

    > I cannot RDP using the user
    Any error message?
    Greetings/Grüße,
    Martin
    Mal ein
    gutes Buch über GPOs lesen?
    Good or bad GPOs? - my blog…
    And if IT bothers me -
    coke bottle design refreshment (-:

  • FB4 not opening after entering Serial Number

    I made a fresh XP installation on an empty and formated partition today.
    SP3 and all MS updates installed.
    System, audio, video etc. drivers are installed,
    then Firefox, Safari, Crome and WAMP,
    that's it, nothing more.
    I installed FB4 beta and it ran fine!
    Test projects behaved as expected etc.
    I closed FB4 a few times and opened again . . . everything great.
    I restarted the machine and all was still fine.
    Until now I always had the "Trial / Serial Number Dialog" pop up and chose the trial.
    Then I entered the serial number I received from Adobe and FB4 Beta stoped loading . . .
    just the Flash Screen . . . "Loading Project" progress and  . . . exit, no FB4!
    Adobe Team, please help

    Kaushik Mukherjee provided a workaround in his reply here:
    http://forums.adobe.com/message/2181579#2181579
    So  . . . I uninstalled Flash Builder,
    installed the Eclipse Plugin Version using bundeled Eclipse.
    Installed Flash Builder 4 Beta.
    Only after creating one new Flex Project in Eclipse, the Flash Builder started up again using the serial number I entered before.
    Not a very elegant workaround, but it fixes the problem.
    I filed a bug report, but the Adobe Bug System indicated that I created a bug that I have no permission to watch so I cannot enter the found workaround.

  • VST edit screen not visible after a certain number in a session

    Hi folks, I have a small strange problem. After I add a certain number of VSTs to a project, I can't see the GUI of the VST anymore. It's there, and working, but I can't edit any parameters because I can't see them anymore. Anyone with this problem and why it happens?
    It seems to be worst with new Waves plugins (I have Gold bundle) but it's general with any VST. Strangely, it doesn't happen with DirectX plugins at all.
    Lenovo laptop, i5, using firepod.

    The main screen is scrollable. The sub screen does not need to be. The box frame has been expanded to allow space for the new objects and the entire new space is visable. Only the objects located in the lower portion of the box are not visible.

Maybe you are looking for