Security for deleting parked documents

Is there a way to secure who can delete parked documents? Currently, we only allow a certain group of users to delete parked documents. However, I would like to have a way for the creator or someone authorized for the account to delete them instead.  When we first tested it some time ago, there did not appear to be any checks for security authorizations.
We are on ERP 04 (ECC 5.0).
Any suggestions?

I just attempted to duplicate the error message you were getting by pinpointing a parked document from 2006 created using FV50. I verified that the document contained cost centers and all CO posting periods from 2006 were locked in OKP1.
I pulled up the document in display mode, clicked on Document in the top left corner and went into change mode, then I clicked on document again while in change mode and selected "Delete Parked Document" and the document was deleted without error. Is this the same deletion method that you are using?
Like the previous response, I don't see how opening the CO posting periods will have any negative impact especially if FI posting periods are left closed.

Similar Messages

  • Tracing the Customer Number For deleted parked document

    Hi,
    I have wrongly deleted the park document . My client wants to know the customer Number of the deleted park document. Where  can I fetch this details from.
    I found that the  Accounting document  Number is stored in table BKPF with a deletion flag Can u please suggest which table the deleted customer no. for the park document is stored
    Thanks in advance
    Ratna & Susan

    Hi Rathna
    Oneway to find out the customer number is, thro transaction FBL5N, select all customer open items (with key date before the parked document was deleted) and select the noted items also.
    You will be able to see the document.
    Thanks
    Ashok
    Reward points if this is useful

  • Deleting Parked Documents for Previous Years

    Hi
    We have got 800 parked documents with a posting date between March 2003
    and May 2010. As per audit requirements we need to delete all these
    parked docuents which are mostly created through Tcode FV50 or FB50
    usin parking option as we don't want to actually post them in system.
    These docments have profit centre or cost centre entries in them as
    well. Now when we try to delete these parked documents we get an error
    message 'Transaction CO Through-postings from FI has been locked'. We
    don't want to open the close CO period as it can use great problem to
    us so can you please tell us some alternate way or some programme which
    can be helpful to delete these parked documents without opening the
    closed CO periods. I will really appreciate your kind response in this
    regard.
    Kind Regards

    I just attempted to duplicate the error message you were getting by pinpointing a parked document from 2006 created using FV50. I verified that the document contained cost centers and all CO posting periods from 2006 were locked in OKP1.
    I pulled up the document in display mode, clicked on Document in the top left corner and went into change mode, then I clicked on document again while in change mode and selected "Delete Parked Document" and the document was deleted without error. Is this the same deletion method that you are using?
    Like the previous response, I don't see how opening the CO posting periods will have any negative impact especially if FI posting periods are left closed.

  • How to list Deleted parked documents

    Hello friends
    I have a question that I wait you can answer it. I need a report that shows the deleted parked documents. I have been trying through FBV3 and FB03 but don't show documents.
    I am currently working on a project implementation R / 3 version 6.0. Here are a user that has created a lot of parked documents that can be displayed in FB03 and FBV3. But every deleted parked documents (BSTAT = Z) don't are displayed.
    For more information, I tell them the steps we are taking to this:
    1. We created a park document
    2. We delete the park document
    3. We enter to FB03 with number, company code and year and can see document
    4. After that we push document list button and dynamic selections (BSTAT = Z) and execute
    5. Document list is empty
    6. We check document in BKPF table and can see that has BSTAT = Z
    I have been looking SAP Notes about this and found 1320519 and 1317523, but aren't precisely about my problem.
    I wish you can help me, either with a good report or a note to correct the problem.
    Best Regards
    Marco

    Thanks by your answers, but I'm still in a doubt.
    If document is still in BKPF, should be display when I execute list button and dynamic selections in FB03?.
    Because this, I feel that reports RFBUEB00 and RFBUEB01 needs a correction.
    Am I in correct or not?
    Greetings
    Marco

  • Delete parked document still committed budget

    Dear SAP-ers,
    I do budget active checking with BCS, the problem is when i do deleted Parked Document using FBV0, the budget still committed. For display this, i am using the standard report painter 4FM (Budget Usage).
    Anyone can help me ? 
    Thanks
    Regard's
    Silvy

    HI,
    Please refer the note 100409.
    Reg
    Madhu M

  • Display document header for a parked document in ECC 6.0

    Hi,
    Does anyone know how to view the header information of a parked document? I cannot find the u201CDisplay header/hatu201D icon anymore when I go to display a parked document via FBV3. This is in ECC 6.0 whereas; in 4.6C I see the u201Chatu201D icon. For the same parked invoice, in ECC 6.0 it is calling FV63 whereas in 4.6C it is calling FBV3 internally to display the parked document when document, company code and FY are input on FBV3 and hit continue.
    Please let me know if there is way to display header info for a parked document in ECC 6.0.
    Thanks,

    Thanks for your reply!!
    What document are you displaying? I tried displaying a parked vendor invoice and that is when I do not see the hat icon. Probably you are displaying a G/L document (example SA), I am able to see the hat icon in that case.
    In 4.6C, it calls FBV3 internally for displaying both invoices and regular g/l documents whereas, in ECC 6.0 it is calling FV63 if it is an invoice and on FV63 I do not see a hat icon. So, was wondering is that how it is or is there any setting that needs to be turned on?
    Thanks,

  • Delete parked document with IDOC related

    *Hi Friends*
    *I have a case with FI parked document and there's a related IDOC, user try to delete parked document but get authorization not acceptable outside workflow.*
    *i have checked the IDOC and found that the work log is empty with 0000000 values*
    *No work item.*
    *so i couldn't change idoc status to WFER to allow user delete related document*
    *any advice on how to delete that parked document.*
    *many thanks*
    *Hana*

    HI,
    I am not aware of any program or tcode to delete idocs in sap.  However, idocs can be archived depending on the idoc status.
    The configuration is in transaction code WE47.
    - Check the idoc status in WE47  to see if the idoc can be archived.
    - We need to run archive program to archive the existing idoc. 
    Thanks,
    Ram

  • Deleted Park Document

    Hi,
    Is it possible to retrieve deleted park document?
    Regards,
    Binay Agarwal

    hi Binay,
    unfortunately it is not possible. It is one of the few things which are completely deleted from the SAP database. You can check in table BKPF, there will be a gap in the document numbers of you delete a parked document.
    hope this helps
    ec

  • Restrict Edit / Delete Parked Documents when first level authorised

    I have set up workflow for Document Parking with 2 levels of authorization.  Now, I need to restrict the user from editing / deleting the parked document when it is approved by the first level.
    I tried creating screen variant through SHD0, but the system does not allow to create for dialog transactions.
    Is there a standard way of restricting or should I write an enhancement?
    Ravi.

    Hi,
    You can use the BTE 1140.
    More details are available in SDN for this BTE.
    Regards,
    Gaurav

  • Validation while deleting parked document.

    Hello,
    1) We have a requirement wherein a parked document should be deleted only by the person parking the document.  Other users should not be permitted to delete document.
    2) We need to restrict document parking only to Tcode FV50L.  Document parking should not be permitted with other transaction codes like FB50L.
    Any clues on how to achieve this are welcome.
    Regards
    Jayesh.

    Go to Tcode FB50L.
    Go to system - Status-dbl clik on program SAPMF05A.
    It will take you to some other screen
    In that go to attributes and note down the package.
    Go to tcode SMOD
    Press F4 and give the above package name and system gives the available user exits for this transcation.
    Select the appropriate one. This will be done by an ABAPer and they will test whether the user exit is triggering at the point you want to control the document and once teh user exit is identified you can use that exits.
    Reward if useful
    sarma

  • Substitution for FI Parked document

    Hi all,
    I have a requirement to make some field like xref2 substitution when I make up a parked document via F-63. I am aware that regular OBBH substitution is not available for parked docs. So the question is do anyone could suggest any standard solution\enhancments? I've already tried few of them like BTE - 00001030 & BADI - AC_DOCUMENT both CHANGE_INITIAL & CHANGE_AFTER_CHECK methods and got no good. So I would appreciate any suggestion.
    Thanks,
    Tim.

    Hi Kumar,
                    I am working to design a Journal entry Workflow for my client.Can you please let me know what are the best practice to implement the Journal entry process.Please let me know how this workflow was implemented in u r case.
    Reply will be gretly appreciated.
    Waiting for u r reply.
    Thanks,
    Yogesh

  • "Post Button" for post parked document

    Hi all,
    I have a issue about workflow for parked document. The workflow it can work properly. But When the authorized person have relased and want to post the parked document, but there isn't even see the "post" button? I can only see "park" and "save as complete". It should be possible to save the document even with some missing data, and in this case you cannot save the document as complete. Could this be some configuration is missing? I have maintain event type link by using subworkflow ws10000052 and create event "CREATED". Could I create event "POSTED"? Need your advise, thanks.
    Regards,
    John

    Hi John,
                  The authorized person has to click the complete document on checking this if there are no errors in the document it will take him to the release screen there he can release the document.
    On clicking the release button a Backgroung method will do the posting, by calling the bapi one more important thing is the posting bapi will check for consistency of the document only if the document is complete it will post the document. So before release the person should have checked complete document.
    Regards,
    Dheepak
    Regards,
    Dheepak

  • BAPI/FM for Change Park Document

    Hi Experts,
    Is there any BAPI or FM to change PARK document (remove payment block).
    Please suggest,
    Regards,
    Kaustubh.

    Hello Kaustubh,
    I would like to suggest the following BAPIs:
    1) BAPI_INCOMINGINVOICE_PARK (parking invoice document)
    2) BAPI_INCOMINGINVOICE_CHANGE (changing a parked document),
    3) BAPI_INCOMINGINVOICE_POST (posting a parked document) and
    4) BAPI_PARKEDINVOICE_DELETE (deleting a parked document).
    Please refer to documentation of these function modules.
    hope this helps.
    regards
    Ray

  • BAPI for changing parked documents

    Hi ,
    I need to know any BAPI exist for changing the posting date of the parked documents.
    Please let me know if there are any BAPI's
    Thanks

    Hi,
    have a look at bapi 'BAPI_INCOMINGINVOICE_PARK'.
    i´m not sure but i guess it allows to change a parked document.
    Best regards.

  • Authority Check or BADI for deleting a document in SOLAR02 transaction

    Hi All,
    Could anyone tell me whether there is any authorization object or BADI to do the check before deleting any document from
    SOLAR02 transaction in Project Documentation Tab or General Documentation Tab
    Thanks a lot in Advance.

    Hi Jonathan,
    Appreciate your reply. As you know the validations kick in based on your input on the screen, kind of mostly part of PAI of the screen (0750 in this case). But my requirement is to prevent this change in the first place, not validating the user's input after a change option is given to the user.
    If you know if and how we can achieve this, please share your thoughts.
    Thanks & Regards,
    Venu

Maybe you are looking for