Security for flash archive restore with NFS

When Flash archive is restored by using NFS, user id and password is not required though they are asked in case of FTP used.
If NFS client host name is registered in NFS server, anyone can restore the backup file if only they know that host name with NFS server name and exported directory.
I found the kerberos selection during resotre process set up on Interactive install, which is on the following screen.
--- Configure Kerberos Security ------------------------------------------
Enter the information required to configuration your system as a Kerberos Cient.
Your Network Administrator ca provide this inforamtion.
Defalult Realm :
Administration Server :
. First KDC:
Additional KDC:
Additional KDC:
Additional KDC:
I did not yet establish the kerberos server, but if any one already tried this function, could you please let me know if this can protect NFS server access by using user id and password.

One option is to secure the OBP with a password.
At the OK prompt, set the security-mode to "command" and then set a password. Careful not to loose this password. With this set the only option is to "boot" without supplying the firmware password.
Commands:
# halt
ok setenv security-mode = command
ok setent security-password <enterpasswd>
ok reset-all

Similar Messages

Are nfs mounts allowed in vfstab after a flash archive restore?

I am restoring a server using a flash archive. The vfstab on the original server contains an entry for an nfs mount. It looks like during the push of the archive to the new server, the vfstab gets saved to vfstab.orig and the nfs mount is removed from vfstab. So I added a finish script to add the nfs mount back to vfstab and now the server gets hung during S73nfs.client during reboot.
Are nfs mounts not allowed in vfstab after a flash archive restore?

One option is to secure the OBP with a password.
At the OK prompt, set the security-mode to "command" and then set a password. Careful not to loose this password. With this set the only option is to "boot" without supplying the firmware password.
Commands:
# halt
ok setenv security-mode = command
ok setent security-password <enterpasswd>
ok reset-all

Searching for Flash Photo Gallery with numbered navigation menu.

I'm looking for a photo gallery with a numbered navigation
menu. I've seen this gallery on several flash web pages. Is this
type of photo gallery a template that comes with flash? Has anyone
come across a tutorial for a photo gallery similar to the link
below.
http://www.rockcreeksm.com/index.php/work/portfolio/

i made this one:
http://www.goldbergphotography.com/
but there are quite a few simpler photogalleries. use google
to search for some tutorials or templates.

Flash Archive restored files

Hi,
We are moving servers (T2000' / Solaris10) to a new Datacentre and using swing kit to reduce the downtime on the production databases.
We plan to take a Flash Archive of the OS and restore the swing kit (exactly the same config) from the Flash Archive, we also plan to take ufsdumps.
Would anyone know the exact files which are not restored as part of the Flash Archive please?? I know Flash Archive runs a sys-unconfig so hosts, defaultrouter, defaultdomain and the Network will not be restored but are there any other files which will not be restored???
Thanks in advance.

LDAP may or may not work. I have three T2000s that I need to update and I've flar'ed them and restored them to a matching T2000 just so there won't be any surprises when I do the real boxes. Sometimes LDAP works, sometimes it doesn't.

UNICODE AND SECURITY FOR FLASH DESKTOP APPS

I'm presently in the development phase of some desktop applications using Adobe Flash to develop rich interactive apps that include games published in AIR for PCs. Given that I intend to commercialize these products, I have the following requests which you may be able to help provide answers to:
- how do I type texts in unicode characters given that my applications will include texts in my local language of yoruba.
- how best can I integrate security features into my application such that serial numbers or activation keys are required to run them? This is to help ensure that the apps run on per PC basis. This'll also help ensure timed licensing for users.
- how best can I obfuscate my swf files so that they are not easily decompiled or viewable by users in my program files or even by software which can expose the source codes? From experience, I have some AIR published desktop apps installed on my PC yet the swf files are viewable from the program files on my harddrive.
- how can I also protect my ActionScript files from being decompiled?

same problem with me sir , If you find answer kindly let me know and if i find the solution it will be my pleasure to share it with you !
Freind, I want to make a flash game ,
but it should not be a web based it is a desktop based application !
and the most important part of this is its security .
I want to do the following things
1)-I can copy this game on others pc , but it must be expired after 10 days .
2)-if someone copy it by any unethical way , it must not be opened on his pc a black screen should come
i have wathced a game like that .
I am confused how to make it ,it can be achieved by using flash or i have to make a separate desktop
application on C#.net or java that can hold this game and take care of security issues .
Thank you very much

Looking for a functional vcam for Flash Pro CC with HD proportions.

Anybody got a functional V-Cam for adobe Flash CC? Ideally in 16:9 ratio? Can't seem to find one for the life of me online and don't know how to code for one. Would love to find one.

It's been a while since I streamed games but I used XSplit (easy) and OpenBroadcaster (better, free) to create a stream. You can layer in anything you like as a cam stream. Your desktop, specific regions, other streams, etc. It shows up as a standard streaming source.

Minimum player for flash 8 swf with remoting

Just wondering if there is a minimum version of the flash
player that will work with the flash 8 remoting elements? I was
hoping that Adobe would have published something but I can't find
it anywhere on their website.
Does anyone know?
Our client wants to support flash 7 AND LOWER as well as keep
the remoting functionality so I want to be clear on what will and
won't work.
Any info would be greatly appreciated.

Flash Lite is what works with Windows Phone: http://en.softonic.com/s/windows-phone-adobe-flash-player:windowsmobile

Archiving files with errors

Hi all
I have been working on a File(FCC) to File(FCC) Scenario. I am working on PI7.0 with SP12. I would like to archive all the files with errors, for which the sender file adapter shows an option Archive Faulty source files. But I am not able to archive any of the error files. Help.sap.com mentions that this functionality works when a permanent error occurs.
I have tried out with all possible combinations and I am still unable to archive the error file.
Please help!!!
Regards
Kartik

Hi,
There are two conditions that you should keep in mind while using the Archive files with errors option
1. The Processing Mode has to be Archive not Delete in case you are using the Add Time Stamp for the archived files with errors(the second check option not the first one)
2. In case the processing mode is Delete you can not use the second ADD Time Stamp option but this also can archive files with errors
Ranjit

Archiving functionality with financial modules

Hi,
When going through the concepts of archive and purge with oracle ebs , i found that we donot have archive functionality with
1. oracle payables
2.Oracle Cost Management
3.Order Management
Could some one tell me why we donot archive data from these modules alone????
Why is purge functionality alone present in all the modules??
Thanks,
Akila Manikandan.

Hi,
There are two conditions that you should keep in mind while using the Archive files with errors option
1. The Processing Mode has to be Archive not Delete in case you are using the Add Time Stamp for the archived files with errors(the second check option not the first one)
2. In case the processing mode is Delete you can not use the second ADD Time Stamp option but this also can archive files with errors
Ranjit

Best practices for Flash CS5 and Flash Builder 4 integration?

With Flash CS5's new XFL file structure/format, what's the best way to structure project files for Flash CS5 integration with Flash Builder 4? Flash CS5 autocreates a folder named after the xfl file as the outer container, and then all the assets/xfl within it. Should this folder be used as the project folder for Flash Builder 4, or better to nest the xfl container folder in a "real" project folder? I would presume the latter, since you might have multiple XFL files in one project. I was hoping to see some automatic linkages between document class of the Flash CS5 XFL file and any default ActionScript class created by Flash Builder, but so far I seem to need to specify a document class directly in Flash CS5's environment and making sure that the path to a default class created by Flash Builder is correct.
Thanks in advance for any suggestions...

Most likely, you know that, but just in case, you can integrate new Flash project into existing Flex 4 project from within the Flash Builder by choosing either Flash Component or Flash Container from the FB Design view. In such workflow Flash Builder opens the Flash CS 4 (I assume that should be the same for CS5) and takes care of the integrating the newly created Flash project into original Flex 4 project.
FTQuest

Ajax for Flash in IE problem

Currently I'm doing a project that requires to deploy ajax
with a Flash object. I use the fscommand for Flash to communicate
with javascript in order to do the Ajax.
I create a flash file name ask.fla. In the file I make a
button and add the script for it like this:
on(press)
fscommand ("send_var", 1);
I have read in the manual of Flash how to make flash
communicate with javascript, and I have configure the publish
setting of HTML file to run "Flash with FSCommand" .
I have another 2 files namely: ask.php and ask_get.php.
The content of the ask.php file is:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml"
xml:lang="en" lang="en">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
<title>ask</title>
</head>
<body bgcolor="#ffffff"
onload="makeRequest('ask_get.php','?test=10');">
<script language="JavaScript">

</script>


<div name="myspan" id="myspan"></div>
</body>
</html>
The content of the ask_get.php is:
<object
classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="
http://fpdownload.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=8,0,0,0"
id="ask" width="462" height="410" align="middle">
<param name="allowScriptAccess" value="sameDomain" />
<param name="movie" value="ask.swf" /><param
name="quality" value="high" /><param name="bgcolor"
value="#ffffff" /><embed src="ask.swf" quality="high"
bgcolor="#ffffff" width="462" height="410" swLiveConnect=true
id="ask" name="ask" align="middle" allowScriptAccess="sameDomain"
type="application/x-shockwave-flash" pluginspage="
http://www.macromedia.com/go/getflashplayer"
/>
</object>
The purpose of the two file is that when the file ask.php is
called, the code in the even <body onload> will call the
makeRequest function, which replate the <div name="myspan"
id="myspan"> with the code in the file ask_get.php, so that the
flash object is embed indirectly in the file.(but it will be shown,
and some how I use it to make the ajax for the page).
When I run the file ask.php in my webserver in Mozilla
FireFox, it run well, the flash file can call the javascript
function, but when I run the file ask.php in IE, the flash file can
not do anything, it can not call the javascript function.
You can check this by running the file ask.php in both
FireFox and IE in your webserver (IIS or Apache).
If the code to embed the swf object in php file is written
directly in the very php file the swf object can contact with
javascript very well and correctly
, as you can test it by running the file ask1.php in both IE
and FireFox in your webserver (IIS or Apache) , when you click the
button, it will show you the message "HELLO" which is call from a
javascript function.
Here is the code of the file ask1.php, which embed the flash
object directly in the php file and it works well in both FireFox
and IE:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml"
xml:lang="en" lang="en">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
<title>ask</title>
</head>
<body bgcolor="#ffffff"
onload="makeRequest('ask_get.php','?test=10');">
<script language="JavaScript">

</script>
<object
classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="
http://fpdownload.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=8,0,0,0"
id="ask" width="462" height="410" align="middle">
<param name="allowScriptAccess" value="sameDomain" />
<param name="movie" value="ask.swf" /><param
name="quality" value="high" /><param name="bgcolor"
value="#ffffff" /><embed src="ask.swf" quality="high"
bgcolor="#ffffff" width="462" height="410" swLiveConnect=true
id="ask" name="ask" align="middle" allowScriptAccess="sameDomain"
type="application/x-shockwave-flash" pluginspage="
http://www.macromedia.com/go/getflashplayer"
/>
</object>
</body>
</html>
The problem is when I call an object by replacing the <div
id=...> with the code for the flash object from the ask_get.php
file, only FireFox can call the javascript but IE does not.
So anyone who know the reason why, please tell me. Thank you
very much.

Be sure your HTML wrapper is embedding the flash object correctly in IE. In all other browsers it can be embedded as an object of a specific type. IE has always required a separate install of an activeX with a certain CLSID.
Look up SWFObject and use that to embed your SWF to be sure that it's being embedded properly for each browser, or use the HTML generated by flash and make sure your publish settings that you have "FSCommand" selected in the drop-down so flash can talk to the browser.

Archived flash player version with Win 8.1

I'm using Firefox version 37.0.1 and Win 8.1 and am having some difficulty with installing a version of flash player that is not the most recent version. I currently have flash player 17.0.0.134 installed and have lost some functionality with extensions which is why I wish to use an older version. When I use the flash player uninstaller and use the 'Check Now' button on https://helpx.adobe.com/flash-player.html I am told that there is no version of flash player installed, however, when I try to install flash player version 16.0.0.35 from the flash archives I get the message "This version of flash player is older than the version currently installed" and the installation process halts. Is there a way to find which version of flash player were previously installed and use the corresponding uninstallers? Is there an additional step to uninstalling flash player for Win 8.1? I'd really like to be able to roll back to the previous version please. Thank you.

It doesn't make a lot of sense that a Flash Player upgrade would affect a third-party Firefox extension. There's no way for other plugins to hook into Flash unless you've disabled ProtectedMode (which is also a bad idea from a security perspective), and we don't hook into other plugins. I'm wondering if maybe some internal Firefox configuration files might have been corrupted.
Are you running the right installer when you download the Archives? There's an ActiveX installer for Internet Explorer, and an NPAPI plug-in installer for Firefox.
If you need to run an older version, you're way better off using the Extended Support Release. It's an old feature branch, but with all the security fixes between now and then. We updated it in parallel with our current release.
Just scroll down to the Extended Support Release section and choose the second row - EXE installer for plug-in based browsers:
Adobe Flash Player Distribution | Adobe
Once you've run that installer, if you still don't see Flash Player, then my guess there's either a bad registry entry or Firefox config file in play.
It won't do a lot of good trying to fix it if the filesystem is in a wonky state, so it's worth ruling that out first:
Caveat: Sometimes corrupted software is an early indicator that your disk is going bad. It's wise to ensure that you have current working backups, especially if you have anything important on the machine. Checking the disk for problems is a relatively safe operation, but will also give the disk a workout. If it's on it's way out, you may not get a lot of additional warning.
Checking the disk for errors:
http://support.microsoft.com/en-us/kb/2641432
At that point, if you identified problems and fixed them, but things still don't work, it's time to uninstall both Flash Player and Firefox and reinstall from pristine sources.
If you're still stuck, let me know.

Is there an archive page for Flash Player plugins for PORTABLE versions of web browsers?

Is there an archive page for downloads of Flash Player plugin installers for the PORTABLE versions of web browsers like Firefox ESR?
One of my web browsers is Firefox ESR 10.0.7 and it is a PORTABLE version of Firefox that apparently needs a different Flash Player plugin than the normal Flash Player plugin that regular versions of most web browsers require.
I do not want to install the most recent Flash Player plugin PORTABLE version because I've read about problems with it and that's the only version that this Firefox ESR will give me the option to download and install when I try to install the needed Flash Player plugin through the browser.
I already know about the normal Adobe Flash Player plugin archive page, linked below, but that does not have the Flash Player plugins for PORTABLE web browsers.
http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html
I also looked on OldApps.com and I couldn't find anything there.
Where can I download an older version, possibly one of the 11.2 Flash Player plugins from around April 2012, that will work with this PORTABLE version Firefox ESR?
I tried this question on the Mozilla Firefox help forum but no one could answer it.
Thanks for any help,
digiday

Hi Pat,
Thanks again for your reply. Your solutions seemed like they might work, especially since you were able to tell me where the Windows system Flash Player plugin files are located.
And for a minute or two, I thought it was working. In my first tests in the PORTABLE Firefox browser I'm testing with, it was actually playing some YouTube videos, but then I found that not all YouTube videos apparently rely on Flash to play... apparently some do and some do not, and I found that most of them do require Flash to play. I had tested with some of my own videos that I uploaded to YouTube in the past in my first tests today and they played just fine, but then I started testing with some other Flash YouTube videos and they would not play and I got both the yellow bar at the top of my window telling me to download and install Flash as well as the red banner across the video player that told me I needed to install Flash.
Let me also make it clear that I'm testing this on other sites with Flash videos besides YouTube, and webpages that have relatively simple animated Flash graphics, and those alternate tests are showing that the Flash Player plugin for this PORTABLE Firefox still will not work either.
So to spite everything, I tried actually downloading and installing the newest Flash Player plugin, 11.4 something, (which I was trying to avoid) through the browser, and that only proceeded to overwrite my Windows system Flash Player plugin and it DID NOT place any Flash Player plugin files in the PORTABLE Firefox plugins folder.
I had pasted in the files you recommended in to the PORTABLE Firefox plugins folder, and I actaully included ALL the files from that Windows system Flash plugin folder for this test, but unfortunately that didn't work, and even after I tried changing the name of that one file, it still didn't work.
And I am closing and re-opening the browser in between each of these steps in my test.
So here, below, I'm including an email letter that I've now written to a Tor Browser support email address where I had been corresoponding previously. The "Tor-Firefox" web browser is the PORTABLE Firefox ESR web browser that I've been referring to. This is what I wrote, which pretty much sums up everything I've tried and been unsuccessful with so far...
Hello Tor Browser help staff,
I've now tried everything and I cannot get ANY Flash content to play in this Tor-Firefox ESR web browser, even though I've tried installing the Flash player plugin that this browser asks for when I'm on a YouTube page (and even though this computer already had a current Flash Player plugin installed previously).
Let me make it clear that privacy is not important to me right now during this quest to make the Flash Player plugin work with this Tor browser... I can reset any settings for maximum privacy later when I go back to that purpose for using Tor... right now, I'm just trying to make the Tor browser play Flash content.
So even though I've UNCHECKED the Torbutton>Preferences>Security Settings>Disable plugin during Tor usage box, and I installed a new Flash player plugin THROUGH this browser, and I even set it to allow all scripts because I thought maybe that was complicating things, IT STILL WILL NOT PLAY FLASH CONTENT OF ANY TYPE.
Now, this, explained below, could be part of the problem that I'd like to ask for your help or SOMEONE's help with there in your department...
If I go to the Tor Browser folder on my hard drive at C:>Tor Browser>FirefoxPortable>Data>plugins there are NO Flash plugin files that show up in that folder even after I install a new Flash Player plugin THROUGH this browser... I believe that is why it will not play Flash content.
All it does when I install a Flash Player plugin through this Tor browser is to overwrite my Windows 7 system Flash Player plugin, but it does not actually place any Flash Player plugin files in the C:>Tor Browser>FirefoxPortable>Data>plugins folder, so that's why this PORTABLE version of the Firefox ESR browser will not play any Flash content... and it doesn't work from the Windows system Flash Player plugin the way that my normal Firefox (NON-TOR) web browser does. My other Firefox web browser sees the the Windows system Flash Player plugin just fine and it does play Flash content correctly.
There is, however, one text file that comes stock inside the Tor browser plugins folder and when it is opened it says, "Place Firefox plugins in this directory (Flash, Shockwave, etc)".
So with some advice from someone on the Adobe help forum, I tried copying the Flash Player plugin files from the Windows system folder at C:>Windows>System32>Macromed>Flash in to the Tor browser plugins folder at C:>Tor Browser>FirefoxPortable>Data>plugins, and that still didn't work.
Note that I am closing and re-opening the Tor browser between each of these tests.
So I then followed some further advice from the expert on the Adobe help forum and I changed the name of the main Flash Player plugin file that I had copied and pasted in to the Tor browser plugins folder from "NPSWF32_11_4_402_278.dll" to "NPSWF32.dll", and that still did not work... note that I left all the other files that I copied and pasted from the Windows system Flash plugins folder with the same name they originally had... I tried only changing that one Flash plugin file name, as instructed by the expert on the Adobe help forum.
I also tried posting a question about this on the Mozilla Firefox forum, but no one there is able to answer this question.
What the problem seems to be is that when this Tor-Firefox ESR 10.0.7 browser installs a Flash Player plugin, it just installs it to the Windows system folder (the same way that the normal (non-Tor) Firefox browser does) and NOT into the Tor-Firefox plugins folder C:>Tor Browser>FirefoxPortable>Data>plugins, as would be needed for it to be able to play Flash content.
No matter what I do, whenever I try to view a YouTube video or any Flash video in this browser, or any Flash graphic content at all, I get the yellow bar at the top of the page that says "Additional plugins are required to display all the media on this page - Install Missing Plugins" and there is a banner displayed where the Flash content is supposed to be that says, "The Adobe Flash Player is required for video playback - Get the latest Flash Player".
And as I explained at the top of this email, I have already installed and re-installed the Flash Player plugin on this computer multiple times, including doing it directly through this Tor-Firefox ESR browser itself.
So can ANYONE there tell me how to get the correct Flash Player plugin files in to the Tor-Firefox browser plugins folder at C:>Tor Browser>FirefoxPortable>Data>plugins, and where do I get those files? Everything I've tried, which is pretty extensive, has not worked, and it seems that someone there should know about this.
Thanks for your help.

Restoring complete flash archive

Recently I made a flash archive of my system solaris 8 to tape using the command:
FLARCREATE -N SUN-EC1.FLAR -C -S -R / -T /DEV/RMT/0
I have 2 disks of 32 GB and I will replace them for 2 of 72 GB.
Which command should I use to restore my system completely after the change of the disks?
The image was taken from a live system ; Can I have some problem when restoring the copy?

To restore the backup made with flarcreate you need to boot your upgraded server with the Installation disk CD1
I used the form on the <OK> prompt:
boot cdrom - w
Then the installation should start whare you have to define slices and network parameters and then you should be offered to install OS from standard location (cd) or flash archive. There you need to select flash_archive (I think it is Cntr-4 of F4) which should guide you to select source (local tape) and you just have to confirm and sit down and watch.
Good luck!
Zika from RSA

Can't restore apple id ,you were blocked for security reasons, but to restore the need to enter the key after typing it sends a 4-digit code on the ipad , but at ipade I am not connected to icloud ,and to connect you need to recover your account

can't restore apple id , because apple were blocked for security reasons, but to restore the need to enter the key two- step werification . after typing it , apple sends a 4-digit code on the ipad , but at ipad I am not connected to icloud ,so i cant get code . but if i want to recover apple id, i need to connect icloud, so what to do? help !

I have (sorry forgot to add that). I was switched around and finally I was told I would be put through to a supervisor but after being on hold for about 10 minutes the phone went dead, I did not lose connection so I do not know if I was hung up on or there was some technical difficulty. I called again yesterday and did in fact speak with a supervisor for Account Security but he told me he did not know why it was happening and put me through to a different number but that ended up not being any helpful either. That's when I decided to give it a shot on here!

Security for flash archive restore with NFS

Similar Messages

Maybe you are looking for