Security for report group 6OBU (transaction S_ALR_87013019)

I have a situation where a user with access to the transaction S_ALR_87013019, does not return any data during execution. Another user with much lesser access can return data with the same selection criteria.
A security trace doesn't display any authorization failure. I believe there is a user exit EXIT_SAPFGRWS_001 which can be used to add some extra security for this report group but its not implemented.
Are there any special user specific configurations which control display of data for this report?

Hi Aninda,
I agree. Authorization trace might not be appropriate in this situation.
Also, user parameters are only to pass on specific values, such as company code, default layout etc and doesn't restrict the user from viewing a report.
As mentioned in my earlier reply, the issue could be with a user exit where the user ID should be maintained in a table or the restriction is applied at the table level.
The other issue could be with the version of SAP GUI. You may ask the user who has issue with viewing the report to login on a different system to identify if the issue is with the authorizations or the SAP GUI.
Hope this helps!!
Regards,
Raghu

Similar Messages

  • Profit center security for Report Writer reports

    We need to limit users access to profit center report writer reports.  We attempted to add values to security object K_PCA but this did not work.   I have heard there is a way to turn on objects for report writer checks but so far have been unable to figure out how this is done.

    Which release are you on and how have you defined the authorizations?
    If the st01 trace always returns 0 then chech the "reason code" (this is available since about 6 months).
    Manually you can check it in tcode auth_switch_objects if globally disabled for the client.
    Conversions to the new concept sometimes did this when they didn't want to use it.
    Retro-fitting is difficult because your hierarchies might be maintained in PROD but your roles in DEV.
    Tough call...

  • Create transaction custom for report created with transaction IME1

    Hi,
    I created a report custom for investment management with transaction IME1.
    Now, I have to link this report to a transaction custom.
    Please, could you help me?
    THanks
    Regards

    se93 type a new Z tcode and create new.. from the drop down list select "program and selection screen (report transaction)"
    go back to your report screen from menu; "system --> status" and get the program name for the report.
    type this report to the se93 screen for the t.code. and save...

  • How to get historical currency rate for second group currency transactions in Fixed Assets

    Hello,
    My client had MXN (Mexico Currency) as a legal currency and when the company code was implemented (went live) group currency was not implemented. After 3 years this company code implemented second local currency as USD and is now a USD functional Company. When Fixed assets movements such as depreciation, retirement etc are posted; the postings in local currency is fine but postings in group currency is not fine the reason is the exchange rate for group currency must be 'historical rate" but instead of that the entries are being posted in "current rate". To rectify this issue we need to set the exchange rate as the historical rate. Now my question is where/how can I get the historical rate (rate when asset was acquired/purchased). When the assets were acquired the amount was in MXN and there was no maintenance of USD exchange rate as there was no second local currency so then how can I get the historical exchange rate for USD. Most of the assets were acquired/purchased before 5-10 years then how can I find the USD exchange rate for those periods.
    Thanks,
    Rinki

    It is necessary yo have a different rate type for average. The month-end rate type cannot be used.
    The M-rate type is typically the month-end rate.

  • Report group and report library does not exist

    Dear Guru's
    We are not able to execute the report S_ALR_87013019 in production. After doing analyses, we came to know that library 602 & report group 6OBU does not exist in production, and hence we are not able to excute this report.
    We have to tried to import from client  '000' from transaction code GR59, But in that we are not getting 6OBU report group.
    Please help us to resolve the issue, as we required this report on priority basis.

    Dear Prashant,
    Thanks for your reply.
    The solution given by you is to transport the report library from Dev Client. But our client does not transaport the reports in production system.
    Is ther any other solution to retrieve the library.
    Thanks
    Varsha

  • Problem in Exporting a Report Group having a Report Painter Report.

    I am having a problem in exporting a Report group having a Report Painter report.When I am trying to export the Report Group using transaction GR57 with all dependent objects,it is displaying:
           group 0102CPDNUEA-CCROSI not transported.
           Transport groups separately if necessary.
    There are 6 such groups which are not transported.Can anybody help me in this regards.Can anybody help me in exporting these Groups.Specifically in Report painter reports what do these Groups signify and how can we see them.Please help me....

    hi,
    I am able to export my report groups with dependent objects successfully.
    I dont know why you are getting error message. Just keep break point at ***** and execute it for single group and find out why it is giving error.
      IF SY-BATCH = 'X' OR NO_LIST = 'X'.  "direct or batch
        SET PF-STATUS 'LIST'.
    *****PERFORM TRANSPORT_OBJS USING 'X'.  "transport all jobs
        IF FILE_EXP <> 'X'.
          READ TABLE WT_E071 INDEX 1.
          IF SY-SUBRC = 0.
            LEAVE.
          ENDIF.
        ENDIF.
      ELSE.                                "online
        SET PF-STATUS 'MENU'.
       PERFORM WRITE_TRANSP_OBJS.
      ENDIF.
    regards,
    ram

  • To add new characterstics to a report group

    Hi,
    We have created a report group under 601 library. Structure used is CCSS. But we need the field currency type to be added as a characterstic. Since it is not avialable in CCSS we are unable to do that.Please suggest a way.
    Thanks,
    Seema.

    Hi Shamia,
    Check these Tcode for Report painter,
    Report painter....
    GRR1, grr2, grr3
    GS11, 12, 13 for variable
    GS01, 01, 03 for sets
    GR51, 52, 53 for report group
    GR21, 22, 23 for library
    for export-import:
    -Any new variables (GS17 - Export ,GS18 - Import )
    -new sets (GS07 - Export ,GS08 - Import )
    -new report (GR37 - Export ,GR38 - Import )
    -new report group (GR57 - Export , GR58 - Import )
    -new library (GR27 - Export , GR28 - Import )
    [Report Painter|http://www.virtuosollc.com/PDF/Get_Reporter.pdf]
    Hope your problem solves.
    Thanks & regards,
    Dileep .C

  • Transaction code creation for a report group

    Hi all,
    I created a transaction code ZF17 for a report group FI02 with the following parametrs.
    Transaction: START_REPORT
    checked the skip initial screen check box.    
    D_SREPOVARI-REPORTTYPE = RW
    D_SREPOVARI-REPORT = FI02
    When i tried to run the T-code ZF17, it gives me
    a message : PROGRAM FI02 doesn't exist
    Any ideas why this message comes up?
    Thanks,
    Sobhan.

    I would think that its looking for a program name in the D_SREPOVARI-REPORT  field,   FI02 is not a program name.
    Regards,
    Rich Heilman

  • Transaction code for Report painter

    Hi Experts,
    I have created reports using Report Painter (GRR1).
    I want to create Transaction code (TCODE) for reports which was done using Report painter.
    Could you please help me how to do this.
    Thanks in Advance
    Regards
    Bujji

    You can follow following steps :
    1) goto SE93 -> ENter a name for tcode
    2)Define the Transaction Code as a Parameter Transaction
    3)in the default values for selection-screen block enter the Transaction as 'START_REPORT' .
    4)Check skip initial screen , inherit GUI attribute
    5)In the default values ->name of screen field,   use F4 help to select D_SREPOVARI-REPORTTYPE
    6) Against this field ,in the value column Enter 'RW' .
    7) again in  next row of  name of screen field select D_SREPOVARI-REPORT
    8) as in step 6 ,enter the name of your report Group to which you haev assigned your Report.
    Save and test the TCode.
    This should resolve your problem.

  • How to assign transaction code to report group.

    hi experts,
      i used report painter to create some reports and assign these reports to a report group, i want to assign a transaction code to the report group, how can i do that? hunger for your adivces, thanks a lot!!

    Hi Liu,
    when you change an area menu, you can add transactions that launch ABAP/4 reports, Query lists or report writer's. You can use it for your purpose:
    1. Enter transaction SE43 and change a Z* area menu (no matter which one, you will not change it in the end)
    2. Click on "Add entry as subnode" or "Add entry at the same level" (no matter which one of them)
    3. When SAP shows the popup "Add new entries", click on "Add report"
    4. On the next popup, click on radio-button "Report Writer". Then you will be asked foe the code of the report group.
    5. Then save, and... that's it! SAP will automatically create a transaction for the report group
    6. Now you can cancel the changing of the area menu
    I hope this helps. Best regards,
    Alvaro

  • About report groups and read programs for the object EC_PCA_SUM

    Hi Friends,
    Hope every one is doing well..!
    I've an issue with the report groups and read programs for the object EC_PCA_SUM. As we know that the report groups and read programs available for this object in the application customizing are used to analys the archived data.
    That is these programs comes into picture after the archiving operation.
    For more information, you can visit the below web site:
    [http://help.sap.com/erp2005_ehp_03/helpdata/EN/e4/69f353b75a11d1b5850000e82debc6/frameset.htm]
    Now, my question is how would I check the code for these analysing programs available for this object. I can't see this in SE38.
    Thanks to reply for this..
    Full marks will be awarded.
    Regards,
    Shamim

    Hi Lakshman,
    Thanks for the reply.
    Hi Deiter,
    You're right.
    Your provided transaction "GR55" helped me to find out the program name for a particular group. However, these are just Write and Painter reports.
    But can you please let me know the functionality of these report groups ?? what are these used for ???
    Do we have these programs for other archiving objects like CO_ITEM,CO_ML_BEL,MM_MATBEL,CO_ORDER,
    PP_PLAN,PP_BKFLUSH ??
    More points will be awarded.
    Thanks a lot.
    Regards,
    Shamim
    Edited by: S H A M I M on Sep 19, 2008 3:19 PM

  • Transaction Codes for Report Painter Reports

    Hi,
    Can any bodu assist on how can we create a link for the report painter report and the transaction code for the same.
    Also is there somthing to be taken care while getting the same transported to another client.
    Thanks & Regards,
    Ankur Goel

    Hi,
    Thanks for response.
    Actually I created the Transaction code and get the Report and Transaction code transported but when i executed the transaction code in the Receiver Client i gave run time ABAP error.
    let me give example:
    a) I created the Library, Report Group & Report in my Developement Client.
    b) Using SE93 i assigned the program name of the Report to transaction code.
    c) Got the Library, Report Group, Report & T.code transported to Quality Client.
    d) Executed the transaction code in QAS which gave me error.
    Reason identified:
    a) Let say Program name created for the report is AAXGHGYGBL010 in my client 010.
    b) Transaction code ZREPORT01 created using SE93 for program AAXGHGYGBL010.
    c) Now got the Library, Report Group, Report & T.code transported to Quality Client 050.
    d) In client 050 program AAXGHGYGBL010 doesnot exist as AAXGHGYGBL050 has been created for the transported Report.
    Thanks & Regards,
    Ankur Goel

  • Creating a transaction code for Report Painter

    Hi all,
    I made a report using Report Painter and I need to create a transaction code for the report. Is there a way to create it in Report Painter or I have to do it with transaction SE93?
    Thanks is advance,
    Susanna
    Edited by: Susanna Gill on Sep 10, 2008 10:08 PM

    Simple,
    Go To Se93
    Give the Ztcode and press create
    select the last option (Transaction With parameters)
    In the next screen give transaction as START_REPORT
    Check the three GUI check boxes
    In the default values below give the following
    D_SREPOVARI-REPORTTYPE  :RW
    D_SREPOVARI-REPORT           :(Your Report Group)
    and you are done.

  • CR - giving total transaction count for few groups and 0 for few groups.

    For the column "No of First Call Resolution" I have to count no of interactions based on the Interaction Result, the formula is
    COUNT(Interaction_ID) WHERE INTERACTION_RESULT = 'FCR'
    For which, I wrote the below formula
    If {14CICustomerInteractions_query.Interaction Result} = "FCR" then Count ({14CICustomerInteractions_query.Interaction_ID})
    I have 33,232 interactions on the particular day I selected. When I try to group up and do the calculations it is giving total transaction count for few groups and 0 for few groups.
    Need Solution

    Hi,
    What field is the report grouped on?
    If you wish to find the no of interactions based on some condition and display it for every group, then here's what you need to do:
    1) Create this formula and place this on the details section:
    whileprintingrecords;
    numbervar c;
    If {14CICustomerInteractions_query.Interaction Result} = "FCR" then
    c := c + 1;
    2) Create another formula and place this one on the Group Footer:
    whileprintingrecords;
    numbervar c;
    3) Create this formula to reset the variable and place this on the Group Header:
    whileprintingrecords;
    numbervar c := 0;
    Let me know how this goes!
    -Abhilash

  • How To Restrict Number Of Rows For Multiple Group In Report Output

    Hi ,
    I have a requirement to restrict number of rows in report output.I have three different group , if i use same no of rows to restrict then output is as expected but if i want Deduction group should have 7 rows , earning should have 5 rows and Tax group have 3 rows in report output then XML tag is not working.
    Below is the XML tag i am using -
    First i have declare the variable to restrict the rows -
    <xsl:variable name="lpp" select="number(7)"/>
    <xsl:variable name="lpp1" select="number(5)"/>
    <xsl:variable name="lpp2" select="number(3)"/>
    For Each -
    <?for-each:PAYSLIP?>
    <xsl:variable xdofo:ctx="incontext" name="DedLines" select=".//AC_DEDUCTIONS"/>
    <xsl:variable xdofo:ctx="incontext" name="EarLines" select=".//AC_EARNINGS[ELEMENT_CLASSIFICATION!='Taxable Benefits']"/>
    <xsl:variable xdofo:ctx="incontext" name="EarTaxLines" select=".//AC_EARNINGS[ELEMENT_CLASSIFICATION='Taxable Benefits']>
    <?for-each:$DedLines?><?if:(position()-1) mod $lpp=0?> <xsl:variable name="start" xdofo:ctx="incontext" select="position()"/>
    <?if:(position()-1) mod $lpp1=0?><xsl:variable name="start1" xdofo:ctx="incontext" select="position()"/
    <?if:(position()-1) mod $lpp2=0?><xsl:variable name="start2" xdofo:ctx="incontext" select="position()"/>
    Report output is tabular form (one page has two column - Earning and Deduction ) . Tax group comes below earning group.
    Deduction Group -
    <?for-each-group:$DedLines;./REPORTING_NAME?><?if:position()>=$start and position()<$start+$lpp?>
    <?REPORTING_NAME?>
    <?end if?><?end for-each-group?>
    Earning Group -
    <?for-each-group:$EarLines;./REPORTING_NAME?><?if:position()>=$start1 and position()<$start1+$lpp1?>
    <?REPORTING_NAME?>
    <?end if?><?end for-each-group?>
    Tax Group -
    <?for-each-group:$EarTaxLines;./REPORTING_NAME?><?if:position()>=$start2 and position()<$start2+$lpp2?>
    <?REPORTING_NAME?>
    <?end if?><?end for-each-group?>
    Please let me know in case additional detail is require.
    Thanks in Advance.
    Thanks,
    Harsh
    Edited by: Harsh.rkg on Jan 14, 2013 9:43 PM

    variable lpp2 is declare to restrict EarTaxLines -
    <xsl:variable name="lpp2" select="number(2)"/>
    This will help to restrict the no of rows on one page , if we have more then two tax benefits line then layout will roll over to continuation page.
    As part of report output my expectation is if i restrict Earning , Deduction and Tax benefits to same no of line for example - variable lpp ,lpp1 and lpp2 have same value "number(2)" , we can see the layout is continue on next page (restrict every group can have max two lines) .This is the reason we have 4 header grid , deduction and Tax Benefit lines are rolled over to continuation page .But if we restrict different value for each variable then continuation page layout is missing .
    When we tried for <xsl:variable name="lpp2" select="number(3)"/> value continuation page layout is not getting generate for both employee number .

Maybe you are looking for