Security in file system

hi all
i m creating new file in SIM file system & stroing some data in that
file.now i want to secure that data by any unauthorized access.
for that i need any of the keys like ADM o or any key that i can change permission of file from my applet & make it secure but n/w operater is not going to give me any of the keys.so its not possible according to me.
m i correct?
another thing, i can create any key on SIM & use one key on my STK applet ,to access secure file on SIM file system.
or any other way , can i make file read/write to my applet only,no one other can read/write(access) my file.
thanks & regards
Divyesh.

hi kartagos
once again thank u for ur response,
but i m still a bit confused.
Yes, if you set the Access Domain to "Full Acess" ,
your Applet can read and write any file, regardless
of its ACL. BUT if the ACL is set to "never", no one
can acess that file (Applet, user, Mobile, etc), take for granted that my file has only ADM access.
in this case without ADM key ,can i invalidate & rehabiliate file from my applet?
if i can do that then i will set file as invalidated bydefault ,then from my applet i will rehabililate it & then do read/write on that file from applet & again invalidate it from applet.So nobady can read/write the file a sit is invalidated & required ADM key to change ACL.
as what i have marked GSM file system has read condition for all .& i don't want anybody to read my file accept my applet.
it's
the case of the file Ki : The read acess is set to
"Never" so no Applet and no body can read the content
of the EF Ki ( great ! )if above case not works,
then what i can do that i create one new key set in key management.(like ki ,nobody can read it ) & put one key on my applet . i use key on SIM by key on applet for validation & then only i can perform any read/write operation on file.
in nutshell
can i protact file by key (like enter password before read/write)?
is it possible?
which can be the suitable case for me among the two cases?
Thanks & regards
Divyesh.

Similar Messages

How do I identify the latest file modifications, application install, and registry key modification for Security Forensics.... using GP Audit for registry/file system

Hello,
Title pretty much states it all. I initially set out (as part of a Security Forensics initiative) to identify the most recently installed applications, modified files, and registry key changes using PowerShell. I attempted to pull this information and sort
them by date installed/last modified, but it was brought to my attention this information isn't always present and can be modified - so it's not accurate.
At that time it was suggested we use Group Policy auditing for Registry and File System - but I'm not sure how I'm going to use/pull these in PowerShell? This will be used on remote host all over the world so local physical access isn't an option.
My question is:
Once Group Policy Auditing for Registry and File System has been enabled, how would I go about pulling those audit logs for review once a system has been identified as compromised? I'm brand new to this GP Auditing (we have a separate team for that) so feel
free to take it from the beginning. :)
Thanks in advance!

Hi,
Here are a few suggestions for you:
Ensure Remote Registry service is started on local and remote machines.
Add the – Credential option and supply administrative credentials within the command.
More information for you:
Get-Eventlog doesn't work against Vista/W7 clients
https://social.technet.microsoft.com/Forums/en-US/c5185a01-b0d2-49a7-9aa7-52e6534ada04/geteventlog-doesnt-work-against-vistaw7-clients?forum=winserverpowershell
PowerShell - How to Get XML EventData - Remote Eventlogs - Exchange Events
https://social.technet.microsoft.com/Forums/scriptcenter/en-US/382b10c9-d740-46b1-b81c-b24de911eb14/powershell-how-to-get-xml-eventdata-remote-eventlogs-exchange-events-?forum=ITCG
Powershell script to gather failed logon attempts by event id and type from the security events log
https://social.technet.microsoft.com/Forums/scriptcenter/es-ES/00a62492-c63a-4c8b-92f9-1cc857223a00/powershell-script-to-gather-failed-logon-attempts-by-event-id-and-type-from-the-security-events-log?forum=ITCG
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

RMAN to Disk (shared mounted file system) then secure backup to Tape

Hi
This is a little away from the norm and I am new to Oracle secure Backup.
We have several databases on physically separate servers, all backup to a central disk (a ZFS shared file-system).
We have a media server also with the same mounted file-system so it can see all of the RMAN backups there.
Secure backup is installed on the media server and is configured as such.
The question I have is I need to backup the file system to tape where all the RMAN backups live, I have configured the data set but I get file permission errors for each of the RMAN backup files in the directory.
I have tried to change these permissions but to no avail (assuming it is just a read write access change that is needed - but this may be a problem in the long run). What is the general process for backup of already created RMAN backups sat in a shared area? I know its not the norm to do to disk then to tape backups but can this be done? I would have installed Secure backup client on each server and managed the whole backup through secure backup but this is not possible I must do the to tape from the file system, any advise and guidance on this would be much appreciated.
Kind regards
Vicky
Edited by: user10090654 on Oct 4, 2011 4:50 AM

You can easily accomplish a very streamlined D2D2T strategy! RMAN backup to disk...then backup that disk to tape via RMAN and OSB. Upon restore, RMAN will restore from best media disk or tape based on where files are located.
Donna

CE71SR5 install failure (Start SAP Secure Store in the File System)

Hi!
when i install CE71SR5 CompositionPlatform,met a question, below is the log information, waiting help,thanks.
An error occurred while processing service SAP NetWeaver CE Developer Edition > SAP NetWeaver CE Development System( Last error reported by the step :Cannot create the secure store. SOLUTION: See output of log file SecureStoreCreate.log: INFO: Loading tool launcher... INFO: [OS: Windows XP] [VM vendor: SAP AG] [VM version: 5.1.021] [VM type: SAP Java Server VM] INFO: Main class to start: "com.sap.security.core.server.secstorefs.SecStoreFS" INFO: Loading 8 JAR files: [C:\usr\sap\CE1\SYS\global\security\lib\tools\iaik_jce.jar, C:\usr\sap\CE1\SYS\global\security\lib\tools\iaik_jsse.jar, C:\usr\sap\CE1\SYS\global\security\lib\tools\iaik_smime.jar, C:\usr\sap\CE1\SYS\global\security\lib\tools\iaik_ssl.jar, C:\usr\sap\CE1\SYS\global\security\lib\tools\w3c_http.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcexceptionimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcloggingjavaimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcsecsecstorefsjavacore.jar] INFO: Start SAP Secure Store in the File System - Copyright (c) 2003 SAP AG FATAL: Main class "com.sap.security.core.server.secstorefs.SecStoreFS" cannot be started: java.lang.ExceptionInInitializerError at javax.crypto.Cipher.getInstance(DashoA12275) at javax.crypto.Cipher.getInstance(DashoA12275) at iaik.security.provider.IAIK.a(Unknown Source) at iaik.security.provider.IAIK.addAsJDK14Provider(Unknown Source) at iaik.security.provider.IAIK.addAsJDK14Provider(Unknown Source) at com.sap.security.core.server.secstorefs.Crypt. (Crypt.java:85) at com.sap.security.core.server.secstorefs.SecStoreFS.setSID(SecStoreFS.java:175) at com.sap.security.core.server.secstorefs.SecStoreFS.handleCreate(SecStoreFS.java:836) at com.sap.security.core.server.secstorefs.SecStoreFS.main(SecStoreFS.java:1306) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:161) Caused by: java.lang.SecurityException: Cannot set up certs for trusted CAs at javax.crypto.SunJCE_b. (DashoA12275) ... 14 more Caused by: java.lang.SecurityException: Cannot locate policy or framework files! at javax.crypto.SunJCE_b.i(DashoA12275) at javax.crypto.SunJCE_b.g(DashoA12275) at javax.crypto.SunJCE_r.run(DashoA12275) at java.security.AccessController.doPrivileged(Native Method) ... 15 more FATAL: com.sap.engine.offline.OfflineToolStart will abort now with exitcode 2.). You may now
choose Retry to repeat the current step.
choose View Log to get more information about the error.
stop the task and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/CE71_DEV_ADA/INSTALL.

I have the same problem.
Although i try it use jdk1.5.0.16, the same err occured.
Also i use the jce_policy-1_5_0.zip.
I will appreciate your answer.
I have resolved the problem by copy the
local_policy.jar
US_export_policy.jar
to
sapinst_instdir\CE71_DEV_ADA\INSTALL\sapjvm\sapjvm_5\jre\lib\security
Edited by: wang zhen on Aug 28, 2008 11:08 AM
Edited by: wang zhen on Aug 29, 2008 9:53 AM

Windows & File System Repository - security issues

Hello,
I got a strange behavior in EP 6 SP 2 using KM and Windows file systems. Here is the scenario:
- I created a Network Path and a File System Repository pointing to a Windows 2003 File System, following the portal help instructions. Both EP6 server and Windows 2003 server are in the same domain.
- according the KM Monitor, the repository is up and running
- the portal users can access their respectives folders in the file system after having their uids / passwords mapped in the user mapping option
- the portal is assuming the permissions (read & write & list folder & etc) from windows
So far it seemed to be everything ok - but after some tests we got the problem:
- user "A" has his uid/pwd mapped in portal, and read & write access to the file system "dept_folder". He can access the folder through a KM iview, with r/w privileges.
- user "B" has his uid/pwd mapped in portal, and ONLY read access to the file system "dept_folder". He can access the folder through an KM iview, with read privileges.
- and here comes the problem: if user "A" is logged, and user "B" replaces his uid by user "A" uid in the user mapping (only the uid, the password doesn't matter) he can access the file system "dept_folder" with the same privileges than user "A".
I looked in SDN, SAP Notes and SAP Portal Help trying to find an article related to this, no success so far. We have CM Patches 2 & 3 applied, and Patch 4 doesn't have any comment about this specific security problem.
Has someone already face this problem ? Or could be something wrong in my configuration ?
Rgds, and tks in advance
Fernando Cervantes

Hi David
The same occurred here, I think I know the reason. Let me just give you an overview of my configuration:
Network Path id          ccc-ccc1fs-drive_i
Description *           DRIVE I - CCC1FS Server
Network Path *
ccc1fs\Drive_I
Password           *********
Re-Enter Password      *********
User *           ccc\service
The user was provided by the Windows administrator and has full control for this folder.
File System Repository
Description                  File System drive_i CCC1FS Server
Prefix *                /ccc-ccc1fs-drive_i
Root Directory *           //ccc1fs/drive_i
Windows Landscape System      Windows
ACL Manager                Not set
Security Manager          W2KSecurityManager
The important here is the Security Manager configuration - it must be W2KSecurityManager, otherwise you will have the user permissions overrided by admin user permission. And you will need to configure a Windows system landscape too.
I hope this can help you...concerning the bosses, I got the same situation, I said the whole stuff would work fine
Rgds,
Fernando

ISE 1.2 VM file system recommendation

Hi,
According to http://www.cisco.com/en/US/docs/security/ise/1.2/installation_guide/ise_vmware.html#wp1056074, tabl 4-1 discusses storage requirement for ISE 1.2 in VM environment. It recommends VMFS.
What are the implications when using NFS instead? Is this just a recommendation or an actual requirement?
At the moment, we use Netapp array which uses NFS for all vApps. It will be difficult to justify a creation an additional FC HBA just for this one vApp. Please explain.
TIA,
Byung

If you refer to
http://www.cisco.com/en/US/docs/security/ise/1.2/installation_guide/ise_vmware.html
It says :
Storage
•File System—VMFS
We recommend that you use VMFS for storage. Other storage protocols are not tested and might result in some file system errors.
•Internal Storage—SCSI/SAS
•External Storage—iSCSI/SAN
We do not recommend the use of NFS storage.

Crystal Reports XI String [255] limit with the File System Data driver...

I was trying to create a Crystal Reports XI report to return security permissions of files and folders. I have been able to successfully connect and return data using the File System Data driver as the Data Source; however the String limit on the ACL NT Security Field is 255 characters. The full string of data to be returned can be much longer than the 255 limit and I cannot find how to manipulate that parameter.
I am currently on Crystals XI and Crystal XI R2 and have applied the latest service packs but still see the issue. My Crystal Reports Database DLL for File System data ( crdb_FileSystem.dll ) is at Product Version 11.5.10.1263.
Is it possible to change string limits when using the File System Data driver as the Data Source? If so, how can that be accomplished. If not, is there another method to retrieve information with the Windows File System Data being the Data Source? Meaning, could I reach my end game objective of reporting on the Windows ACL's with Crystal through another method?

Hello,
This is a known issue. Early versions you could not create folder structures longer than 255 characters. With the updates to the various OS's this is now possible but CR did not allocate the same space required.
It's been tracked as an enhancement - ADAPT01174519 but set for a future release.
There are likely other ways of getting the info and then putting it into an Excel file format and using that as the data source.
I did a Google search and found this option: http://www.tomshardware.com/forum/16772-45-display-explorer-folders-tree-structure-export-excel
There are tools out there to do this kind of thing....
Thank you
Don
Note the reference to msls.exe appears to be a trojan: http://www.greatis.com/appdata/d/m/msls.exe.htm so don't install it.
Edited by: Don Williams on Mar 19, 2010 8:45 AM

Problem with DMGs and error: "No Mountable File Systems"

Problem with DMGs and error: "No Mountable File Systems"
The files are not corrupt. The problem is occurring with all DMGs that are apparently formatted in MS-DOS FAT16. No the file will not mount with Disk utility or any other disk mounter programs I have found.
This is now the second time this occurred and now effects my MBP and my iMac. First time i spent days with Apple support and the only solution was ultimately back up the data, reformat the HD, start over from scratch and reload everything. That lasted about a month before the problem resurfaced and is now an issue on both iMac and MBP.
I tried to identify all the programs I installed immediately before the error, as I am convinced it is the result of a software conflict.
Recent programs includes:
1) upgrading from Parallels 5.5 to 6.0 on both machines.
2) using an HP secure II usb drive and setting up a secure disk.
3) installing new itunes 10
4) new update to Flip For Mac.
The files affected are downloaded dmgs, including personal brain and google earth, both which are formatted in FAT16.
Any help or thoughts? Apple has now spent hours trying and they say i now have to reformat and wipe and start over. That is unacceptable and based on pasted experience the problem is likely to repeat itself. having to wipe and rebuild a HD ever month is not an solution. i need to fid the root problem.
In the meantime, anyone got a real solution on how to extract the data for a DMG using a different method?
Message was edited by: remaia

Where you able to find the solution, i am having the same problem, all was fine till i install some programs only same one i saw did we both did was flip4mac i uninstalled it but the problem is still there, i also restored and erased the hardrive but im not up to doing that all over again. If you found anything out let me know i would greatly appreciate it

Problem in restoring IOS resilient secured config file

Hi everybody,
I'am testing the CISCO IOS resilient feature on a CISCO 1841 router but i have trouble when restoring the secured configuration file.
First i entered the two commands secure boot-image et secure boot-config in global configuration mode.
When i entered the command show secure booset in privilege exec mode i can see the two files:
flash:c1841-advsecurityk9-mz.124-10a.bin and flash:.runcfg-20110809-165042.ar
After that, i've erased the startup-config on the router and reloaded it. Then, i entered in rommon mode and entered the command boot flash:c1841-advsecurityk9-mz.124-10a.bin to boot from the secured IOS image. The system reset and in global config mode, i entered the command:
secure boot-config restore flash:.runcfg-20110809-165042.ar and i got the following message: ios resilience: there is an existing file with name flash:.runcfg-20110809-165042.ar. But nothing changed because my old configuration didn't come back.
When i've tried the command copy flash:.runcfg-20110809-165042.ar startup-config in privilege mode i got the message: Error opening flash:.runcfg-20110809-165042.ar (File not found).
Can someone help me to solve my problem please? Thanks.

You can not restore without using the latest available os, unless hyou have jailbroken your device. Apple does not support downgrades on iops devices. and if jailbroken, your warrenty and support is no longer valid including assistance from this forum.
Error details
http://support.apple.com/kb/TS4451
Error 3194, Error 17, or "This device isn't eligible for the requested build"

File system task error ; Access to the path " " is denied

HI All,
I have created a simple package to copy xml files from multiple source folders to destination folder.
Folder names and paths are stored in a sql table. I use execute sql taks to get folder and path names. set the restult set to full result set in the execute sql task.
Then for each loop is used to loop through each file name. File system taks is inside the for each loop. Destination vairable and source varable were created and assigned them inthe file system task.
But I am getting an error message.
[File System Task] Error: An error occurred with the following error message: "Access to the path '\\cor\Groups\DN\Share2\Servicing \RESPONSE_FILES\Services' is denied.".
But I am able to do this if i design the package to move just one file. i.e without using variables. I get the error message only when I use variables.
Can anyone tell me how to fix this please?
Thanks
shamen

How to give the access please.
Ramu Gade
Login using a sysadmin account
Go to the folder right click security and you've the option to add new account. You should give account write access if you want to copy files to folder.
see
http://technet.microsoft.com/en-in/library/bb456988.aspx
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

Read only file system

One of my Parabola installations has started to always mount the / partition read-only. I've booted into a different install on the same machine, and can mount the affected partition without problems. I've done a fsck, and run the SMART disk checks. No problems. I've touched /forcefsck so a file system check is done every time I boot, but still the partition is read-only when it finishes booting.
This is the output of 'mount':
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
sys on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
dev on /dev type devtmpfs (rw,nosuid,relatime,size=1024388k,nr_inodes=256097,mode=755)
run on /run type tmpfs (rw,nosuid,nodev,relatime,mode=755)
/dev/sdb10 on / type ext4 (ro,relatime,data=ordered)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,relatime)
/dev/sdb9 on /boot type ext4 (rw,relatime,data=ordered)
/dev/sdb1 on /media/Stuff type fuseblk (rw,nosuid,nodev,noexec,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096)
binfmt on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,relatime)
This is the output of 'dmesg':
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.6.3-1-LIBRE (nobody@root) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Tue Oct 23 00:29:01 UYST 2012
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux-libre root=UUID=f0206707-f1ca-4bea-9eb3-c5d3713e4a4e ro resume=UUID=5b4248ba-30c3-48e5-a090-3a9c9f49d9c4 quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff8ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ff90000-0x000000007ff9dfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007ff9e000-0x000000007ffcffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007ffd0000-0x000000007ffddfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007ffe0000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: System manufacturer System Product Name/P5KPL-CM, BIOS 0702 08/27/2010
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x7ff90 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x7ff8ffff]
[ 0.000000] [mem 0x00000000-0x7fdfffff] page 2M
[ 0.000000] [mem 0x7fe00000-0x7ff8ffff] page 4k
[ 0.000000] kernel direct mapping tables up to 0x7ff8ffff @ [mem 0x1fbfd000-0x1fffffff]
[ 0.000000] RAMDISK: [mem 0x37a10000-0x37cfffff]
[ 0.000000] ACPI: RSDP 00000000000fb6a0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 000000007ff90000 0003C (v01 A_M_I_ OEMRSDT 08001027 MSFT 00000097)
[ 0.000000] ACPI: FACP 000000007ff90200 00084 (v02 A_M_I_ OEMFACP 08001027 MSFT 00000097)
[ 0.000000] ACPI: DSDT 000000007ff905c0 07BFA (v01 A0968 A0968000 00000000 INTL 20060113)
[ 0.000000] ACPI: FACS 000000007ff9e000 00040
[ 0.000000] ACPI: APIC 000000007ff90390 0006C (v01 A_M_I_ OEMAPIC 08001027 MSFT 00000097)
[ 0.000000] ACPI: MCFG 000000007ff90400 0003C (v01 A_M_I_ OEMMCFG 08001027 MSFT 00000097)
[ 0.000000] ACPI: OEMB 000000007ff9e040 00080 (v01 A_M_I_ AMI_OEM 08001027 MSFT 00000097)
[ 0.000000] ACPI: HPET 000000007ff981c0 00038 (v01 A_M_I_ OEMHPET 08001027 MSFT 00000097)
[ 0.000000] ACPI: GSCI 000000007ff9e0c0 02024 (v01 A_M_I_ GMCHSCI 08001027 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007ff8ffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x7ff8ffff]
[ 0.000000] NODE_DATA [mem 0x7ff8c000-0x7ff8ffff]
[ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d600000-ffff88007f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x7ff8ffff]
[ 0.000000] On node 0 totalpages: 524063
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3913 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8127 pages used for memmap
[ 0.000000] DMA32 zone: 511953 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] e820: [mem 0x80000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007fc00000 s84608 r8192 d21888 u524288
[ 0.000000] pcpu-alloc: s84608 r8192 d21888 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515866
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-libre root=UUID=f0206707-f1ca-4bea-9eb3-c5d3713e4a4e ro resume=UUID=5b4248ba-30c3-48e5-a090-3a9c9f49d9c4 quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 2048780k/2096704k available (4726k kernel code, 452k absent, 47472k reserved, 4144k data, 772k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 8388608 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1613.131 MHz processor
[ 0.003338] Calibrating delay loop (skipped), value calculated using timer frequency.. 3227.68 BogoMIPS (lpj=5377103)
[ 0.003342] pid_max: default: 32768 minimum: 301
[ 0.003391] Security Framework initialized
[ 0.003397] AppArmor: AppArmor disabled by boot time parameter
[ 0.003643] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.004961] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.005580] Mount-cache hash table entries: 256
[ 0.005927] Initializing cgroup subsys cpuacct
[ 0.005933] Initializing cgroup subsys memory
[ 0.005946] Initializing cgroup subsys devices
[ 0.005949] Initializing cgroup subsys freezer
[ 0.005951] Initializing cgroup subsys net_cls
[ 0.005953] Initializing cgroup subsys blkio
[ 0.005995] CPU: Physical Processor ID: 0
[ 0.005998] CPU: Processor Core ID: 0
[ 0.006000] mce: CPU supports 6 MCE banks
[ 0.006010] CPU0: Thermal monitoring enabled (TM2)
[ 0.006015] process: using mwait in idle threads
[ 0.006021] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift is 0xffffffff
[ 0.008169] ACPI: Core revision 20120711
[ 0.013350] ftrace: allocating 18348 entries in 72 pages
[ 0.026962] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.059974] smpboot: CPU0: Intel(R) Celeron(R) CPU E1200 @ 1.60GHz stepping 0d
[ 0.059996] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.059996] perf_event_intel: PEBS disabled due to CPU errata
[ 0.059996] ... version: 2
[ 0.059996] ... bit width: 40
[ 0.059996] ... generic registers: 2
[ 0.059996] ... value mask: 000000ffffffffff
[ 0.059996] ... max period: 000000007fffffff
[ 0.059996] ... fixed-purpose events: 3
[ 0.059996] ... event mask: 0000000700000003
[ 0.083501] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.096681] smpboot: Booting Node 0, Processors #1
[ 0.109825] Brought up 2 CPUs
[ 0.109825] smpboot: Total of 2 processors activated (6455.37 BogoMIPS)
[ 0.110104] devtmpfs: initialized
[ 0.112186] PM: Registering ACPI NVS region [mem 0x7ff9e000-0x7ffcffff] (204800 bytes)
[ 0.112186] NET: Registered protocol family 16
[ 0.112186] ACPI: bus type pci registered
[ 0.112186] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.112186] PCI: not using MMCONFIG
[ 0.112186] PCI: Using configuration type 1 for base access
[ 0.113367] bio: create slab <bio-0> at 0
[ 0.113401] ACPI: Added _OSI(Module Device)
[ 0.113401] ACPI: Added _OSI(Processor Device)
[ 0.113401] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.113401] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.114233] ACPI: EC: Look up EC in DSDT
[ 0.116040] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.122816] ACPI: SSDT 000000007ffa00f0 001D2 (v01 AMI CPU1PM 00000001 INTL 20060113)
[ 0.122816] ACPI: Dynamic OEM Table Load:
[ 0.122816] ACPI: SSDT (null) 001D2 (v01 AMI CPU1PM 00000001 INTL 20060113)
[ 0.122816] ACPI: SSDT 000000007ffa02d0 00143 (v01 AMI CPU2PM 00000001 INTL 20060113)
[ 0.122816] ACPI: Dynamic OEM Table Load:
[ 0.122816] ACPI: SSDT (null) 00143 (v01 AMI CPU2PM 00000001 INTL 20060113)
[ 0.122816] ACPI: Interpreter enabled
[ 0.122816] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.122816] ACPI: Using IOAPIC for interrupt routing
[ 0.122816] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.122816] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in ACPI motherboard resources
[ 0.136077] ACPI: No dock devices found.
[ 0.136086] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.136182] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.136328] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.136382] PCI host bridge to bus 0000:00
[ 0.136387] pci_bus 0000:00: busn_res: [bus 00-ff] is inserted under domain [bus 00-ff]
[ 0.136390] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.136394] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.136397] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.136400] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.136403] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.136406] pci_bus 0000:00: root bus resource [mem 0x80000000-0xffffffff]
[ 0.136420] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[ 0.136478] pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400
[ 0.136533] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.136587] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[ 0.136606] pci 0000:00:1b.0: reg 10: [mem 0xfe9fc000-0xfe9fffff 64bit]
[ 0.136697] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.136723] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[ 0.136803] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.136831] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[ 0.136910] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.136941] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.136986] pci 0000:00:1d.0: reg 20: [io 0xc480-0xc49f]
[ 0.137022] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.137067] pci 0000:00:1d.1: reg 20: [io 0xc800-0xc81f]
[ 0.137108] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.137153] pci 0000:00:1d.2: reg 20: [io 0xc880-0xc89f]
[ 0.137190] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 0.137235] pci 0000:00:1d.3: reg 20: [io 0xcc00-0xcc1f]
[ 0.137282] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.137304] pci 0000:00:1d.7: reg 10: [mem 0xfe9fbc00-0xfe9fbfff]
[ 0.137395] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.137419] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.137491] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
[ 0.137581] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 0.137630] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[ 0.137645] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.137656] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.137667] pci 0000:00:1f.1: reg 18: [io 0x08f0-0x08f7]
[ 0.137678] pci 0000:00:1f.1: reg 1c: [io 0x08f8-0x08fb]
[ 0.137689] pci 0000:00:1f.1: reg 20: [io 0xffa0-0xffaf]
[ 0.137730] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
[ 0.137747] pci 0000:00:1f.2: reg 10: [io 0xc400-0xc407]
[ 0.137757] pci 0000:00:1f.2: reg 14: [io 0xc080-0xc083]
[ 0.137767] pci 0000:00:1f.2: reg 18: [io 0xc000-0xc007]
[ 0.137777] pci 0000:00:1f.2: reg 1c: [io 0xbc00-0xbc03]
[ 0.137786] pci 0000:00:1f.2: reg 20: [io 0xb880-0xb88f]
[ 0.137827] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.137845] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 0.137901] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 0.137974] pci_bus 0000:01: busn_res: [bus 01] is inserted under [bus 00-ff]
[ 0.137991] pci 0000:01:00.0: [1002:68f9] type 00 class 0x030000
[ 0.138008] pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.138021] pci 0000:01:00.0: reg 18: [mem 0xfeac0000-0xfeadffff 64bit]
[ 0.138031] pci 0000:01:00.0: reg 20: [io 0xd000-0xd0ff]
[ 0.138047] pci 0000:01:00.0: reg 30: [mem 0xfeaa0000-0xfeabffff pref]
[ 0.138085] pci 0000:01:00.0: supports D1 D2
[ 0.138109] pci 0000:01:00.1: [1002:aa68] type 00 class 0x040300
[ 0.138125] pci 0000:01:00.1: reg 10: [mem 0xfeafc000-0xfeafffff 64bit]
[ 0.138195] pci 0000:01:00.1: supports D1 D2
[ 0.138231] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.138236] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.138240] pci 0000:00:01.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.138246] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.138291] pci_bus 0000:03: busn_res: [bus 03] is inserted under [bus 00-ff]
[ 0.138295] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 0.138347] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-ff]
[ 0.138372] pci 0000:02:00.0: [1969:1026] type 00 class 0x020000
[ 0.138398] pci 0000:02:00.0: reg 10: [mem 0xfebc0000-0xfebfffff 64bit]
[ 0.138412] pci 0000:02:00.0: reg 18: [io 0xec00-0xec7f]
[ 0.138519] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.138544] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.138555] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.138560] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 0.138565] pci 0000:00:1c.1: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.138595] pci_bus 0000:04: busn_res: [bus 04] is inserted under [bus 00-ff]
[ 0.138642] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[ 0.138654] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.138657] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.138660] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.138663] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.138666] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xffffffff] (subtractive decode)
[ 0.138689] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.138794] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.138867] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.138903] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 0.138963] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.138967] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.145009] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.145073] ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
[ 0.145128] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 11 12 14 15)
[ 0.145187] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.145246] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.145306] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.145365] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.145425] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 11 12 14 15)
[ 0.146698] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.146703] vgaarb: loaded
[ 0.146705] vgaarb: bridge control possible 0000:01:00.0
[ 0.146775] PCI: Using ACPI for IRQ routing
[ 0.147301] PCI: pci_cache_line_size set to 64 bytes
[ 0.147387] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.147389] e820: reserve RAM buffer [mem 0x7ff90000-0x7fffffff]
[ 0.147545] NetLabel: Initializing
[ 0.147548] NetLabel: domain hash size = 128
[ 0.147550] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.147571] NetLabel: unlabeled traffic allowed by default
[ 0.147588] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.147593] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.147599] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.166686] Switching to clocksource hpet
[ 0.177018] pnp: PnP ACPI init
[ 0.177044] ACPI: bus type pnp registered
[ 0.177174] pnp 00:00: [bus 00-ff]
[ 0.177179] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.177182] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.177186] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.177189] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.177192] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.177195] pnp 00:00: [mem 0x80000000-0xffffffff window]
[ 0.177279] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.177295] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[ 0.177363] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.177369] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.177419] pnp 00:02: [dma 4]
[ 0.177423] pnp 00:02: [io 0x0000-0x000f]
[ 0.177426] pnp 00:02: [io 0x0081-0x0083]
[ 0.177429] pnp 00:02: [io 0x0087]
[ 0.177431] pnp 00:02: [io 0x0089-0x008b]
[ 0.177434] pnp 00:02: [io 0x008f]
[ 0.177437] pnp 00:02: [io 0x00c0-0x00df]
[ 0.177478] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.177494] pnp 00:03: [io 0x0070-0x0071]
[ 0.177508] pnp 00:03: [irq 8]
[ 0.177544] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.177557] pnp 00:04: [io 0x0061]
[ 0.177595] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.177609] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.177617] pnp 00:05: [irq 13]
[ 0.177654] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.178000] pnp 00:06: [irq 6]
[ 0.178004] pnp 00:06: [dma 2]
[ 0.178007] pnp 00:06: [io 0x03f0-0x03f5]
[ 0.178010] pnp 00:06: [io 0x03f7]
[ 0.178096] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.178501] pnp 00:07: [irq 7]
[ 0.178504] pnp 00:07: [dma 3]
[ 0.178508] pnp 00:07: [io 0x0378-0x037f]
[ 0.178511] pnp 00:07: [io 0x0778-0x077f]
[ 0.178686] pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.178731] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
[ 0.178735] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
[ 0.178738] pnp 00:08: [io 0x0290-0x0297]
[ 0.178815] system 00:08: [io 0x0290-0x0297] has been reserved
[ 0.178821] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.178918] pnp 00:09: [io 0x0010-0x001f]
[ 0.178922] pnp 00:09: [io 0x0022-0x003f]
[ 0.178925] pnp 00:09: [io 0x0044-0x005f]
[ 0.178928] pnp 00:09: [io 0x0062-0x0063]
[ 0.178934] pnp 00:09: [io 0x0065-0x006f]
[ 0.178937] pnp 00:09: [io 0x0072-0x007f]
[ 0.178939] pnp 00:09: [io 0x0080]
[ 0.178942] pnp 00:09: [io 0x0084-0x0086]
[ 0.178945] pnp 00:09: [io 0x0088]
[ 0.178948] pnp 00:09: [io 0x008c-0x008e]
[ 0.178951] pnp 00:09: [io 0x0090-0x009f]
[ 0.178953] pnp 00:09: [io 0x00a2-0x00bf]
[ 0.178956] pnp 00:09: [io 0x00e0-0x00ef]
[ 0.178959] pnp 00:09: [io 0x04d0-0x04d1]
[ 0.178962] pnp 00:09: [io 0x0800-0x087f]
[ 0.178965] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
[ 0.178968] pnp 00:09: [io 0x0480-0x04bf]
[ 0.178971] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
[ 0.178974] pnp 00:09: [mem 0xfed20000-0xfed8ffff]
[ 0.179068] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 0.179072] system 00:09: [io 0x0800-0x087f] has been reserved
[ 0.179076] system 00:09: [io 0x0480-0x04bf] has been reserved
[ 0.179080] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.179083] system 00:09: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.179089] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.179173] pnp 00:0a: [mem 0xfed00000-0xfed003ff]
[ 0.179219] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.179280] pnp 00:0b: [mem 0xffb00000-0xffbfffff]
[ 0.179284] pnp 00:0b: [mem 0xfff00000-0xffffffff]
[ 0.179332] pnp 00:0b: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.179387] pnp 00:0c: [mem 0xffc00000-0xffefffff]
[ 0.179460] system 00:0c: [mem 0xffc00000-0xffefffff] has been reserved
[ 0.179466] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.179524] pnp 00:0d: [mem 0xfec00000-0xfec00fff]
[ 0.179528] pnp 00:0d: [mem 0xfee00000-0xfee00fff]
[ 0.179608] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.179612] system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.179617] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.179660] pnp 00:0e: [io 0x0060]
[ 0.179663] pnp 00:0e: [io 0x0064]
[ 0.179673] pnp 00:0e: [irq 1]
[ 0.179734] pnp 00:0e: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.179796] pnp 00:0f: [irq 12]
[ 0.179852] pnp 00:0f: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.180166] pnp 00:10: [irq 4]
[ 0.180170] pnp 00:10: [dma 0 disabled]
[ 0.180173] pnp 00:10: [io 0x03f8-0x03ff]
[ 0.180292] pnp 00:10: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.180342] pnp 00:11: [mem 0xf0000000-0xf3ffffff]
[ 0.180427] system 00:11: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.180433] system 00:11: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.180636] pnp 00:12: [mem 0x00000000-0x0009ffff]
[ 0.180640] pnp 00:12: [mem 0x000c0000-0x000cffff]
[ 0.180643] pnp 00:12: [mem 0x000e0000-0x000fffff]
[ 0.180646] pnp 00:12: [mem 0x00100000-0x7fffffff]
[ 0.180649] pnp 00:12: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.180743] system 00:12: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.180747] system 00:12: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.180751] system 00:12: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.180754] system 00:12: [mem 0x00100000-0x7fffffff] could not be reserved
[ 0.180760] system 00:12: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.180916] pnp: PnP ACPI: found 19 devices
[ 0.180919] ACPI: ACPI bus type pnp unregistered
[ 0.188605] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.188613] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.188617] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
[ 0.188628] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.188646] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.188650] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.188653] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.188657] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.188664] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x801fffff]
[ 0.188668] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
[ 0.188673] pci 0000:00:1c.1: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
[ 0.188678] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.188683] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.188687] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.188693] pci 0000:00:01.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.188697] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.188703] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 0.188707] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.188713] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff]
[ 0.188718] pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff 64bit pref]
[ 0.188725] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.188729] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 0.188735] pci 0000:00:1c.1: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.188740] pci 0000:00:1c.1: bridge window [mem 0x80400000-0x805fffff 64bit pref]
[ 0.188747] pci 0000:00:1e.0: PCI bridge to [bus 04]
[ 0.188784] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[ 0.188805] pci 0000:00:1e.0: setting latency timer to 64
[ 0.188810] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.188814] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.188817] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.188820] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.188824] pci_bus 0000:00: resource 8 [mem 0x80000000-0xffffffff]
[ 0.188827] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.188830] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.188833] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.188836] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 0.188840] pci_bus 0000:03: resource 1 [mem 0x80000000-0x801fffff]
[ 0.188843] pci_bus 0000:03: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[ 0.188846] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.188849] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.188852] pci_bus 0000:02: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
[ 0.188856] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.188859] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.188862] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.188865] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.188868] pci_bus 0000:04: resource 8 [mem 0x80000000-0xffffffff]
[ 0.188916] NET: Registered protocol family 2
[ 0.189551] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.192082] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.192686] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.192758] TCP: reno registered
[ 0.192773] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.192798] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.192949] NET: Registered protocol family 1
[ 0.193147] pci 0000:01:00.0: Boot video device
[ 0.193158] PCI: CLS 32 bytes, default 64
[ 0.193230] Unpacking initramfs...
[ 0.285578] Freeing initrd memory: 3008k freed
[ 0.287514] audit: initializing netlink socket (disabled)
[ 0.287533] type=2000 audit(1351450895.286:1): initialized
[ 0.303689] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.306261] VFS: Disk quotas dquot_6.5.2
[ 0.306342] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.306570] msgmni has been set to 4007
[ 0.306904] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.306951] io scheduler noop registered
[ 0.306955] io scheduler deadline registered
[ 0.307043] io scheduler cfq registered (default)
[ 0.307215] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.307324] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.307443] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 0.307659] intel_idle: does not run on family 6 model 15
[ 0.307698] GHES: HEST is not enabled!
[ 0.307788] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.328340] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.349279] 00:10: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.349579] Linux agpgart interface v0.103
[ 0.349708] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.352389] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.352444] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.352607] mousedev: PS/2 mouse device common for all mice
[ 0.352700] rtc_cmos 00:03: RTC can wake from S4
[ 0.352865] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.352896] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.352913] cpuidle: using governor ladder
[ 0.352915] cpuidle: using governor menu
[ 0.353088] drop_monitor: Initializing network drop monitor service
[ 0.353195] TCP: cubic registered
[ 0.353379] NET: Registered protocol family 10
[ 0.353609] NET: Registered protocol family 17
[ 0.353626] Key type dns_resolver registered
[ 0.353965] PM: Checking hibernation image partition UUID=5b4248ba-30c3-48e5-a090-3a9c9f49d9c4
[ 0.377050] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.398600] PM: Hibernation image not present or could not be loaded.
[ 0.398629] registered taskstats version 1
[ 0.399166] rtc_cmos 00:03: setting system clock to 2012-10-28 19:01:35 UTC (1351450895)
[ 0.400807] Freeing unused kernel memory: 772k freed
[ 0.401093] Write protecting the kernel read-only data: 8192k
[ 0.407007] Freeing unused kernel memory: 1408k freed
[ 0.410355] Freeing unused kernel memory: 652k freed
[ 0.424642] systemd-udevd[42]: starting version 194
[ 0.484567] ACPI: bus type usb registered
[ 0.484613] usbcore: registered new interface driver usbfs
[ 0.484629] usbcore: registered new interface driver hub
[ 0.484994] usbcore: registered new device driver usb
[ 0.485924] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.485981] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.485987] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.485997] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.489913] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.489922] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.489951] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe9fbc00
[ 0.493550] SCSI subsystem initialized
[ 0.496118] ACPI: bus type scsi registered
[ 0.496720] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.497003] hub 1-0:1.0: USB hub found
[ 0.497013] hub 1-0:1.0: 8 ports detected
[ 0.497923] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.497967] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.497972] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.497982] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.498020] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c480
[ 0.498143] libata version 3.00 loaded.
[ 0.499305] hub 2-0:1.0: USB hub found
[ 0.499317] hub 2-0:1.0: 2 ports detected
[ 0.499540] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.499547] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.499557] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.499610] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c800
[ 0.500253] hub 3-0:1.0: USB hub found
[ 0.500264] hub 3-0:1.0: 2 ports detected
[ 0.500442] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.500448] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.500463] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.500512] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c880
[ 0.500811] hub 4-0:1.0: USB hub found
[ 0.500822] hub 4-0:1.0: 2 ports detected
[ 0.501016] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.501022] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.501039] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.501090] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000cc00
[ 0.502169] hub 5-0:1.0: USB hub found
[ 0.502179] hub 5-0:1.0: 2 ports detected
[ 0.502422] ata_piix 0000:00:1f.1: version 2.13
[ 0.502499] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.503963] scsi0 : ata_piix
[ 0.504744] scsi1 : ata_piix
[ 0.505372] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.505378] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.505429] ata_piix 0000:00:1f.2: MAP [
[ 0.505431] P0 P2 P1 P3 ]
[ 0.505484] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.507566] scsi2 : ata_piix
[ 0.508975] scsi3 : ata_piix
[ 0.509624] ata3: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xb880 irq 19
[ 0.509630] ata4: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb888 irq 19
[ 0.684177] ata3.00: ATA-8: WDC WD6400AAKS-00A7B2, 01.03B01, max UDMA/133
[ 0.684184] ata3.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.691230] ata3.00: configured for UDMA/133
[ 0.691417] scsi 2:0:0:0: Direct-Access ATA WDC WD6400AAKS-0 01.0 PQ: 0 ANSI: 5
[ 0.699349] sd 2:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[ 0.699463] sd 2:0:0:0: [sda] Write Protect is off
[ 0.699468] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.699516] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.774080] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 >
[ 0.775132] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.096765] usb 2-2: new low-speed USB device number 2 using uhci_hcd
[ 1.275214] usbcore: registered new interface driver usbhid
[ 1.275219] usbhid: USB HID core driver
[ 1.276959] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input1
[ 1.277358] hid-generic 0003:04B3:310C.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-2/input0
[ 1.290145] tsc: Refined TSC clocksource calibration: 1613.217 MHz
[ 1.290153] Switching to clocksource tsc
[ 1.426263] PM: Starting manual resume from disk
[ 1.426269] PM: Hibernation image partition 8:8 present
[ 1.426271] PM: Looking for hibernation image.
[ 1.426530] PM: Image not found (code -22)
[ 1.426535] PM: Hibernation image not present or could not be loaded.
[ 1.648559] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null)
[ 12.388263] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[ 12.459036] fuse init (API version 7.20)
[ 13.150864] Adding 1951860k swap on /dev/sda8. Priority:-1 extents:1 across:1951860k
[ 0.691798] ACPI: Invalid Power Resource to register!
[ 14.060519] synergys[417]: segfault at 0 ip 0000000000449fa9 sp 00007fff68a19a90 error 4
[ 14.060531] in synergys[400000+cb000]
(I disconnected the second hard drive in the machine to verify that it wasn't causing problems. Hence the sda / sdb discrepancy)
I've been able to mount the partitions and chroot into them, but I don't know what to do from here. Oddly, I've discovered that 'ls' doesn't output anything, although bash completion seems to work ok.
Any ideas on what I should do to get my system running again?
Thanks in advance,
Bernie

Have you read the forum rules? Asking for support for Parabola isn't going to get you very far.
https://wiki.archlinux.org/index.php/Fo … pport_ONLY

Why can't I access the K1 file system from my PC?

I could access the entire file system excluding the data folder yesterday. However since installing Letools, I no longer can drag-and-drop photos and movies to the K1 from Windows Explorer. I uninstalled Letools, but I still can't access the file system.
Please help.
Thank you

Thank you for trying to help. We have compared security mode settings and their Macs say that commenting is allowed, while mine says it's not allowed. I'm assuming this is why I can't highlight and they can. But I dont understand why they're different? The files this happens to are PDFs that our college classes assign as reading- so we all go to the same place to access these PDFs and save them, so the security modes shouldn't be different, but they are. Any idea why? Are Macs just enabled to do this for whatever reason and PCs aren't?

ECC6 EHP2 (ABAP+Java) system copy using file system copy

Hello Experts,
I have a question around system copy method for a dual stack ECC6 EHP2 system.
We are planning to take full file system backup of this entire ECC6 EHP2 dual stack system and throw it on a completely new hardware with new host name but same SID. We are also planning to do a host renaming in instance profiles and re-building the control files in target system after we finish the file system restore.
Is this method supported in SAP ? Or we strictly have to use SAPinst to do export and import method. In any case our source and target platform is not going to chance as per our scenario.
Any suggestions will be greatly appreciated.
Thanks,
Harshal

> Thanks for the quick response. Is their any document that says it is not supported ? Because of no proper document that says no to do it, client want's to try it out.
For the ABAP part this is certainly feasible.
The Java part has not only issues with the secure store but also with SID and hostname. The old values are stored in many places in the database and in, depending on the applications installed, many .properties files in the filesystem. So it would be not enough to somehow regenerate the secure store but also change hostname and SID in different places that are not really all documented.
What you are basically looking for is
Note 757692 - Changing the hostname for J2EE Engine 6.40/7.0 installation
with the significant sentence
This note should be applied only when the hostname of a machine
where the j2ee engine was already installed has changed.
It does not replace the SAP official system copy procedure and
MUST NOT be used for copying of an instance to another host and/or with different SID.
Markus

Uploaded Files stored in Oracle 10G database or in Unix File system

Hey All,
I am trying to understand best practices on storing uploaded files. Should you store within the database itself (this is the current method we are using by leveraging BLOB storage) or use a BFILE locator to use the files system storage (we have our DB's on UNIX) . . .or is there another method I should be entertaining? I have read arguments on both sides of this question. I wanted to see what answers forum readers could provide!! I understand there are quite a few factors but the situation I am in is as follows:
1) Storing text and pdf documents.
2) File sizes range from a few Kb to up to 15MB in size
3) uploaded files can be deleted and updated / replaced quite frequently
Right now we have an Oracle stored procedure that is uploading the files binary data into a BLOB column on our table. We have no real "performance" problems with this method but are entertaining the idea of using the UNIX file system for storage instead of the database.
Thanks for the insight!!
Anthony Roeder

Anthony,
First word you must learn here in this forum is RESPECT.
If you require any further explanation, just say so.
BLOB compared with BFILE
Security:
BFILEs are inherently insecure, as insecure as your operating system (OS).
Features:
BFILEs are not writable from typical database APIs whereas BLOBs are.
One of the most important features is that BLOBs can participate in transactions and are recoverable. Not so for BFILEs.
Performance:
Roughly the same.
Upping the size of your buffer cache can make a BIG improvement in BLOB performance.
BLOBs can be configured to exist in Oracle's cache which should make repeated/multiple reads faster.
Piece wise/non-sequential access of a BLOB is known to be faster than a that of a BFILE.
Manageability:
Only the BFILE locator is stored in an Oracle BACKUP. One needs to do a separate backup to save the OS file that the BFILE locator points to. The BLOB data is backed up along with the rest of the database data.
Storage:
The amount of table space required to store file data in a BLOB will be larger than that of the file itself due to LOB index which is the reason for better BLOB performance for piece wise random access of the BLOB value.

The Em Key is not configured properly or is corrupted in the file system and doe s not exist in the Management Repository.

I'm getting this error and is there any way to resolve this without re-creating the service/s again, etc. Just curious if there are any suggestions/steps I may have missed, if not, I'll drop and recreate the services again
Anyway, I have a backup of the emkey.ora and put it in the sysman/config directory, but still doesn't work... please see below...
C:\Documents and Settings\abigail>emctl status emkey
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
Please enter repository password:
The Em Key is not configured properly or is corrupted in the file system and doe
s not exist in the Management Repository. To correct the problem:
1) Copy the emkey.ora file from another OMS or backup machine to the OH/sysman/c
onfig directory.
2) Configure the emkey.ora file by running "emctl config emkey -emkeyfile <emkey
.ora file location>".
C:\Documents and Settings\abigail>emctl config emkey -emkeyfile E:\app\abigail\p
roduct\11.2.0\dbhome_1\sysman\config
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
Please enter repository password:
The Em Key is already configured. To override the current configuration, run "em
ctl config emkey <options> -force".
C:\Documents and Settings\abigail>emctl config emkey -emkeyfile E:\app\abigail\p
roduct\11.2.0\dbhome_1\sysman\config -force -sysman_pwd ********
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
The Em Key could not be configured. Unable to access file E:\app\abigail\product
\11.2.0\dbhome_1\sysman\config.
C:\Documents and Settings\abigail>emctl secure dbconsole -sysman_pwd ********
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
http://ABIGAIL:5501/em/console/aboutApplication
DBCONSOLE already stopped...   Done.
Agent is already stopped...   Done.
Securing dbconsole...   Started.
Please enter repository schema password:
Securing dbconsole...   Failed.
EMKey is misconfigured.

Sorry but I'll have to ignore your suggestion, and don't worry about how I spend my time
AND OHMYGODD IT WORKSS!!! For future reference, this is how I solved it based on my searches, actually based on one particular search:
http://franjv.blogspot.com/2013/08/emkey-problems-in-oracle-rac-11gr2.html
Thank youuu whoever wrote that and... is it the same "Fran" who helped me the last time?!? Coincidence??
ANyway, thank youuuu

Security in file system

Similar Messages

Maybe you are looking for