Security issue: Are the "r" commands needed by VDI 3?

Do we need rlogin, or any of the other r-commands, for VDI 3?
Description: The .rhosts files is supported in PAM.
Status: Open
For example:
GEN002100: /etc/pam.conf is supported by the pam .rhost file.

The right document syntax for this is:
UNIX: Do I Need To Use The "oinstall" Group? (Doc ID 463052.1)
FRançois

Similar Messages

HT1338 There is a lot of talk about the Java security issues and the ability to download a patch fix, do i need to do this or will software update pick this up for me?

There is a lot of talk about the Java security issues and the ability to download an apple patch fix, do i need to do this or will software update pick this up for me?

Thanks for that, how do I establish if I have Java installed as on Safari preferences it indicates the following
Web content - Enable Java
- Enable JavaScript

Is X-windows and GUI desktops supported on the ODA "engineered system" running a RAC database? If it is, what is the yum command needed to install the X-windows, Gnome, and KDE package groups?

Is X-windows and GUI desktops supported on the ODA "engineered system" running a RAC database? If it is, what is the yum command needed to install the X-windows, Gnome, and KDE package groups?

While I agree with the direction of the suggestions with installing packages for X-windows, we do not have a blanket 'apply any package' recommendation.
In particular we do not support altering the kernel (although we do have exceptions which we review on a case by case basis).
Basically, if the you want to alter functionality that would not impact core functionality you are usually fine.
A good guideling is : The more dependencies that there are between the package / rpm you are considering using the higher the potential impact on functionality - meaning higher chance for problems
Note: We do use VNC including Real and Tiger regularly , but we have no hard recommendation on how you may want to use X-windows. I have never seen a limitation other than comments on bugs
or incompatibility within the X-window product itself with certain kernel levels.
Patching may overwrite some packages that you may install, however, _depending on packages/rpms added_ there is also the possibility that you will break existing functionality to the point
that patching itself will fail ( we have already seen a few cases of this in which case the proper mitigation is to remove / roll-back any alterations to the ODA before patching, and then adding the packages/rpms
back after the patching is completed.
From what you are discussing the impact should be low without conflicts, but please consider the above, and if you have specific packages which you consider potential problems
please create an SR so that we can review packages / rpms on an individual basis.
Once again: the main criteria for not supporting rpms is regarding the kernel itself
Chuck

What are the mandatory fields needed to setup/register the SIP phone manually in CUCM

What are the mandatory fields needed to setup/register the SIP phone manually.Also, if someone can let me know the mandatory fields for Cisco based SIP phone and also the third party SIP hard phones like Avaya or any other Third party SIP phones both Soft phone and physical phone requirements...in CUCM
Please suggest...I need to know if MAC address is mandatory for all Cisco SIP phone to setup

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/7_1_2/ccmcfg/bccm-712-cm/b09sip3p.html
http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-communications-manager-version-70/112110-phone-add-00.html

What are the components I need to install on my apps server

Hello All,
Our Oracle DB 10.1.0.3.0 is installed on Linux Server.
Oracle 10g Developer Site is installed on windows XP.
I have upgraded form & reports form earlier version 6.0..
Now I need to install Oracle Application Server on windows 2003 (x86) 32 bit.
I never done this b4.
My question is that ,
what are the components I need to install on my apps server to run Forms & Reports?
I am installing apps server on one machine.
But when I read documentation they said its better to install on two machine.
Regards,
Diana

Yes,
I'm sorry to tell you but for forms and reports (BI) you need to install almost everything, you need to install an infrastructure as first components, and then a midtier for AS with Business Intelligence option, in this second component you can chose to install Reports, forms, OCJ4, Portal, any other component you need or you thik you will need in the future.
You can install both in one Server if you don't have resources for 2 or 3 thinking on load balance. It works fine for me in one server but my operation is not too big.
Carlos

If you want to set up a iphone plan in store, what are the documents you need ?

when doing a instore setup what are the required things needed. Say this is your first iphone ?

Credit card & picture ID should be all that is needed. If you've never had cell service before, they'll run a credit check.

I need to transfer settings from my Macbook to a new Macbook pro. what are the steps I need to follow?

I need to transfer the settings (mail, safari, etc.) from my Macbook to a new Macbook pro. what are the steps I need to follow?

Time Machine will sort that out, you got an external HD ?

Powerview Cannot connect to the server due to a security issue. The server may not have been able to match the host for silverlight

Hello,
I have a sharepoint 2010 sp1 CU Dec 2011 server with a SQL Server 2012 SP1 CU4 reporting services instance. I am able to open Power View and use it normally when bypassing the ISA Reverse Proxy server. However when going thru ISA I receive the
following Error.
Power View Cannot connect to the server due to a security issue. The server may not have been able to match the host for Silverlight. This error appears after I click yes on an Internet Explorer Display Mixed Mode prompt.
I've seen a couple references to this issue but not much. This one mentions a clientaccesspolicy.xml file but I haven't had any luck with that. http://connect.microsoft.com/SQLServer/feedback/details/716433/cannot-connect-to-the-server-due-to-a-security-issue-the-server-may-not-have-been-able-to-match-the-host-for-silverlight
Any Ideas? Thanks.
Ryan

Hi Ryan,
Based on my research, the issue should occur due to a by design behavior in Threat Management Gateway (TMG). To work around this issue, you can use SSL between the TMG and the SharePoint Web Server.
Hope this helps.
Regards,
Mike Yin
TechNet Community Support

Just activated BlueAnt S4 with my iPhone4 and having an issue with the Phone Commands

Just activated BlueAnt S4 with my iPhone4 and having an issue with the Phone Commands - as I have multiple numbers for people (ie: iPhone, Work, Home), is it the BlueAnt that is having the issues or the iPhone? Tried to eliminate info on my partner's contact in with only 2 contact numbers (iPhone, Home) and one or the other is totally screwing up. Seems, from BlueAnt website, that it would be the iPhone contacts...and the guessing begins?!! Anyone else have similar issues when BlueAnt S4 was paired and giving 'Phone Commands'?? Any suggestions would be beneficial as I've spent way too much time on the web looking for a good fix/answer. Thanks.

On your new phone: Settings>General>Reset>Erase All Content & Settings. Start over, this time using your new ID.

What are the steps i need to follow to refresh the database

Hi Team,
I am the junior DBA first time i need to do Database Refreshment on UNIX platform.
1. Database Names are different and mount points are diffrents.
2. Synonyms and dblinks are should be retained.
How to do this and what are the steps i need to follow.
Please suggest any one.
Regards,
Venkat.

Venkat wrote:
Hi,
Version is Oracle 10g.
Venkat..Start here: http://docs.oracle.com/cd/B19306_01/backup.102/b14191/rcmconc2.htm#i1006532

15 minutes ago I purchased the perfect browser. I'm not experienced with computers and it's more that if can handle at this time. What are the steps I need to do.

15 minutes ago I purchased the perfect browser. I'm not experienced with computers and it's more that if can handle at this time. What are the steps I need to do.

It's a browser from App Store. " the perfect browser ". I couldn't find any information for refunds . I'm just learning about ios7 and it's well above my level.at this time

I have creative suite cloud products installed on my work computer. What are the steps I need to take to install them on my home/back up computer?

I have creative suite cloud products installed on my work computer. What are the steps I need to take to install them on my home/back up computer?

just log into your account and start downloading your apps, https://creative.adobe.com

I have a macbook with Tiger. What are the steps I need to take to upgrade to Lion and the cloud? I have the Snow leopard disk just received from Apple.

What are the steps I need to take to upgrade my Macbook with Tiger to Lion and the cloud? I have the install disk for Snow Leopard.

Hi Carol, good/sound advice by Ziatron so far.
We need more info about your Mac to see if it will even be capable,
So we know more about it...
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
Hardware Overview:
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 6 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.21f4
You'll need to buy SL/10.6 first & get it to 10.6.8, then get Lion... if you can run it.
Or if you can erase your disk...
http://store.apple.com/us/product/MD256
Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 2GB at least)
    * 5GB of available disk space (I say 30GB at least)
    * DVD drive for installation
    * Some features require a compatible Internet service provider; fees may apply.
    * Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
It looks like they do still have it:
http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA
If it's a core Duo & not a Core2Duo, then it'll only run in 32 bit mode.
Snow Leopard/10.6.x Requirements...
Lion/101.7 System requirements
    •    x86-64 processor (Macs with an Intel Core 2 Duo, Intel Core i3, Intel Core i5, Intel Core i7, or Xeon processor.)
    •    At least 2GB of memory, (I say 4GB)
    •    Latest version of Mac OS X Snow Leopard (10.6.8), with the Mac App Store installed
    •    At least 4GB of disk space for downloading, (I say 40GB at least)
Like Snow Leopard, Lion does not support PowerPC-based Macs (e.g., Power Macs, PowerBooks, iBooks, iMacs (G3-G5), eMacs).
Lion also does not support 32-bit Intel Core Duo or Core Solo based Macs. Rosetta is no longer available in Lion, which means Lion no longer supports PowerPC applications.
It looks like Apple will have Lion available on USB drives for $69...
http://store.apple.com/us/product/MD256

Security Issues with the BP Internet user role creation--SU01

Hi All,
We are implementing the B2B Internet sales scenario using CRM 4.0. we
have contact persons who logs in and chose the distributor and then
start placing orders or look at product catalog .... Now contact person
is created as a BP in CRM and relation ship is maintained to sold to
(bp). During this process the contact person should be created under
the Internet user role which uses the SU01. so we will be able to
change password or change the roles of the users while creating BP
under the internet user role -- same as what we do in SU01.
This is now a security Issue because who ever can access the BP
(create/change) will be able to do the things we can do under
transaction SU01. But we still need to access the Internet user role in-order to assign the user id to the contact person . Is there any other
way of doing this.
Please advice ASAP.
Thanks
Vasu

Hi Ashwini,
you need to modify the logon routine and then in the user management (isauseradmin application) to do this. Then there are likely changes to the catalog identification, and very likely to most processes in the shop. I really wouldn't advise doing so. As accounts usually have contact persons: Why does your client insist in providing a login for the organization and not for a person?
To achieve something that looks almost like the desired solution you, e.g., could model a dummy contact person for each account that shall get a logon, that then does the job. The contact person could be named like the company and then you are back to plain standard.
Rgds
Thomas

What are the things we need to take care while moving from 11g to 12c.

Dear All,
One of my client having the application running on 11g and now he wants to move it on 12c.
Now he is asking to me that, what are the things will not work or impacted due to this. Any code level changes, syntax, functions etc are working in 11g and now there is difference or not working in 12c. Could you please help me in this.
Is there any document for all these thing. I searched on google but not able to find any specific doc.
Thanks in advance.
Regards,
ganesh

Gaurav_91 wrote:
Hi,
Moving from 11g to 12c will not impact anything.
Database in 11g will now act as PDB's in 12c.
And what makes you say so? What about the changes/fixes done in the optimizer that would alter the plans? What about if the client wants to use in-memory database option? And your statement that database in 11g will now act as PDB in 12c doesn't make any sense. What if the client is not willing to move to multitenancy? What about the scripts that are running in 11g without any issues and suddenly, will break in 12c due to PDB's ? Do you have any technical reference to validate your claim that there won't be any impact ?
Aman....

Security issue: Are the "r" commands needed by VDI 3?

Similar Messages

Maybe you are looking for