Security issues for Discoverer 10g apps 12i

gurus,
I have couple of things to get it done at client.
We are on Oracle Apps rel 12i with dicoverer 10g.
Did anyone setup MOAC to be enabled and operational in business areas?
Setting up secure responsibilities in discoverer for MOAC?
Any setup needs to be done for custom report security in discoverer ?
thx

Hi,
I did setup new MOAC security profiles and assigned multiple organizations to that profile for testing purpose.
After this, I did run concurrent program "Security List Maintennce" etc...
Tested Upding profile at user level or responsibility level.
On APPS side fine.
I need the some basic steps on setup of security issues for discoverer side.
1) Business areas (any security steps need to be followed in order to access data for single or multi-org)
2) Custom Reports ( any security setup or any moac security profile setting against responsibilty for accessing single or multi-org data)
Since we dont have default operating unit parameter as specified in the concurrent program, how do you restrict data?
3) Reconciling security approach r12 with discoverer (any steps need to be followed here after r12 configuration with security issues)
4) Custom Views ( any steps to be followed for single or multi-org data as security aspect)
Looking for info on these setups.
Thx

Similar Messages

  • Security issues for mail relay.

    When setting up a mail relay.
    Are there any special considerations regarding passwords for the administrator?
    Are there any services that need to be specifically turned off?
    Any other issues?
    TIA
    Hans

    Hi,
    I did setup new MOAC security profiles and assigned multiple organizations to that profile for testing purpose.
    After this, I did run concurrent program "Security List Maintennce" etc...
    Tested Upding profile at user level or responsibility level.
    On APPS side fine.
    I need the some basic steps on setup of security issues for discoverer side.
    1) Business areas (any security steps need to be followed in order to access data for single or multi-org)
    2) Custom Reports ( any security setup or any moac security profile setting against responsibilty for accessing single or multi-org data)
    Since we dont have default operating unit parameter as specified in the concurrent program, how do you restrict data?
    3) Reconciling security approach r12 with discoverer (any steps need to be followed here after r12 configuration with security issues)
    4) Custom Views ( any steps to be followed for single or multi-org data as security aspect)
    Looking for info on these setups.
    Thx

  • Security certificate issue for Provider Hosted App (SP Online)

    Hi all,
    I am having a hard time with SP Online debugging a basic provider hosted app.
    Steps I have taken to create the app:
     created a new provider hosted app in Visual Studio 2013 and setting my SP Online debugging site (wich works perfectly for SP hosted apps).
    Chose Azure ACS option, although I do not have an Azure account
    When I deploy the app I get to the page on my debugging site where I must choose "Trust It", but when I do I get the message that the Connection is Unsecure/unsafe:
     How can I fix this? Do I need to create an Azure account for debugging purposes already? Or is there another way to solve the problem?

    Hi,
    I understand that you get Security certificate issue for Provider Hosted App (SP Online).
    Per my knowledge, you need to create an Azure account for debugging purposes.
    To create a SharePoint 2013 app for Office 365 and publish it to an Azure web site, you can refer to:
    http://blogs.msdn.com/b/kaevans/archive/2014/02/24/creating-a-sharepoint-2013-app-with-azure-web-sites.aspx
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • Privilege issues in Discoverer 10g

    Hi All,
    For some weired reason, I am encountering these problems using discoverer 10g:
    1) two identically set up/privileged users one working (can see business areas) and one not (cannot see business areas) ?
    2) BA viewable in web client but not desktop?
    Please let me know if you have any more questions.
    Thanks.

    Thx for the response Tamir. Yes the security and the privileges have been set up as expected using Tool -> options.
    We use db users since its a stand alone set up. The BA's have been shared to both the users the same way but for some reason they dont work the same manner.
    The second issue is even weired. I was wondering if other users may have come across similar issue. Just wondering.
    Thanks.

  • Version Control In Discoverer 10g - Apps with PVCS

    Hello,
    I am using Discoverer 10g with Oracle Apps and PVCS is being used in the project for version control. How to Do version control for Discoverer Workbooks with PVCS.
    Please elaborate with an example.
    Thank You.

    You can export the workbooks and version control the exported .eex file. You could do the same for Business Areas if desired.
    Regards,
    Steve.

  • About "kernel.exec-shield" and "because they will bring security issue" for linux ASE

    In " ASE Quick Installation Guide for Linux", "kernel.exec-shield=0" and  “kernel.randomaize-va-space=0” should be set.
    But SuSE engineers say that  “kernel.exec-shield=0”and “kernel.randomaize-va-space=0” will bring the OS security issue.
    Customer want to know why ASE need the above parameters ?
    Has anybody the idea for customer's question?

    If the parameters are not set as documented, attempts to start additional engines beyond the first one will fail, generating stack traces.
    ASE acts in many ways like it's own operating system, scheduling individual user connections (spids) to actively run (note that ASE was developed well before native threading was commonly available).  Each spid has it's own stack information that gets swapped in when it is set to "running" state on the engine and swapped out when it yields the engine.  The mechanics of this is not that different from the buffer overrun exploits described in the Red Hat document linked to by the
    install guide, http://www.redhat.com/f/pdf/rhel/WHP0006US_Execshield.pdf
    and the exec-shield mechanics definatately interfere ASE's operations when ASE is using multiple dataserver processes (engines) that swap spids around.
    -bret

  • Data pump issue for oracle 10G in window2003

    Hi Experts,
    I try to run data pump in oracle 10G in window 2003 server.
    I got a error as
    D:\>cd D:\oracle\product\10.2.0\SALE\BIN
    D:\oracle\product\10.2.0\SALE\BIN>expdp system/xxxxl@sale full=Y directory=du
    mpdir dumpfile=expdp_sale_20090302.dmp logfile=exp_sale_20090302.log
    Export: Release 10.2.0.4.0 - Production on Tuesday, 03 March, 2009 8:05:50
    Copyright (c) 2003, 2007, Oracle. All rights reserved.
    Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Produc
    tion
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    ORA-31626: job does not exist
    ORA-31650: timeout waiting for master process response
    However, I can run exp codes and works well.
    What is wrong for my data pump?
    Thanks
    JIM

    Hi Anand,
    I did not see any error log at that time. Actually, it did not work any more. I will test it again based on your emial after exp done.
    Based on new testing, I got below errors as
    ORA-39014: One or more workers have prematurely exited.
    ORA-39029: worker 1 with process name "DW01" prematurely terminated
    ORA-31671: Worker process DW01 had an unhandled exception.
    ORA-04030: out of process memory when trying to allocate 4108 bytes (PLS non-lib hp,pdzgM60_Make)
    ORA-06512: at "SYS.KUPC$QUEUE_INT", line 277
    ORA-06512: at "SYS.KUPW$WORKER", line 1366
    ORA-04030: out of process memory when trying to allocate 65036 bytes (callheap,KQL tmpbuf)
    ORA-06508: PL/SQL: could not find program unit being called: "SYS.KUPC$_WORKERERROR"
    ORA-06512: at "SYS.KUPW$WORKER", line 13360
    ORA-06512: at "SYS.KUPW$WORKER", line 15039
    ORA-06512: at "SYS.KUPW$WORKER", line 6372
    ORA-39125: Worker unexpected fatal error in KUPW$WORKER.DISPATCH_WORK_ITEMS while calling DBMS_METADATA.FETCH_XML_CLOB [PROCOBJ:"SALE"."SQLSCRIPT_2478179"]
    ORA-06512: at "SYS.KUPW$WORKER", line 7078
    ORA-04030: out of process memory when trying to allocate 4108 bytes (PLS non-lib hp,pdzgM60_Make)
    ORA-06500: PL/SQL: storage error
    ORA-04030: out of process memory when trying to allocate 16396 bytes (koh-kghu sessi,pmucpcon: tds)
    ORA-04030: out of process memory when trying to allocate 16396 bytes (koh-kghu sessi,pmucalm coll)
    Job "SYSTEM"."SYS_EXPORT_FULL_01" stopped due to fatal error at 14:41:36
    ORA-39014: One or more workers have prematurely exited.
    the trace file as
    *** 2009-03-03 14:20:41.500
    *** ACTION NAME:() 2009-03-03 14:20:41.328
    *** MODULE NAME:(oradim.exe) 2009-03-03 14:20:41.328
    *** SERVICE NAME:() 2009-03-03 14:20:41.328
    *** SESSION ID:(159.1) 2009-03-03 14:20:41.328
    Successfully allocated 7 recovery slaves
    Using 157 overflow buffers per recovery slave
    Thread 1 checkpoint: logseq 12911, block 2, scn 7355467494724
    cache-low rba: logseq 12911, block 251154
    on-disk rba: logseq 12912, block 221351, scn 7355467496281
    start recovery at logseq 12911, block 251154, scn 0
    ----- Redo read statistics for thread 1 -----
    Read rate (ASYNC): 185319Kb in 1.73s => 104.61 Mb/sec
    Total physical reads: 189333Kb
    Longest record: 5Kb, moves: 0/448987 (0%)
    Change moves: 1378/5737 (24%), moved: 0Mb
    Longest LWN: 1032Kb, moves: 45/269 (16%), moved: 41Mb
    Last redo scn: 0x06b0.9406fb58 (7355467496280)
    ----- Recovery Hash Table Statistics ---------
    Hash table buckets = 32768
    Longest hash chain = 3
    Average hash chain = 35384/25746 = 1.4
    Max compares per lookup = 3
    Avg compares per lookup = 847056/876618 = 1.0
    *** 2009-03-03 14:20:46.062
    KCRA: start recovery claims for 35384 data blocks
    *** 2009-03-03 14:21:02.171
    KCRA: blocks processed = 35384/35384, claimed = 35384, eliminated = 0
    *** 2009-03-03 14:21:02.531
    Recovery of Online Redo Log: Thread 1 Group 2 Seq 12911 Reading mem 0
    *** 2009-03-03 14:21:04.718
    Recovery of Online Redo Log: Thread 1 Group 1 Seq 12912 Reading mem 0
    *** 2009-03-03 14:21:16.296
    ----- Recovery Hash Table Statistics ---------
    Hash table buckets = 32768
    Longest hash chain = 3
    Average hash chain = 35384/25746 = 1.4
    Max compares per lookup = 3
    Avg compares per lookup = 849220/841000 = 1.0
    *** 2009-03-03 14:21:28.468
    tkcrrsarc: (WARN) Failed to find ARCH for message (message:0x1)
    tkcrrpa: (WARN) Failed initial attempt to send ARCH message (message:0x1)
    *** 2009-03-03 14:26:25.781
    kwqmnich: current time:: 14: 26: 25
    kwqmnich: instance no 0 check_only flag 1
    kwqmnich: initialized job cache structure
    ktsmgtur(): TUR was not tuned for 360 secs
    Windows Server 2003 Version V5.2 Service Pack 2
    CPU : 8 - type 586, 4 Physical Cores
    Process Affinity : 0x00000000
    Memory (Avail/Total): Ph:7447M/8185M, Ph+PgF:6833M/9984M, VA:385M/3071M
    Instance name: vmsdbsea
    Redo thread mounted by this instance: 0 <none>
    Oracle process number: 0
    Windows thread id: 2460, image: ORACLE.EXE (SHAD)
    Dynamic strand is set to TRUE
    Running with 2 shared and 18 private strand(s). Zero-copy redo is FALSE
    *** 2009-03-03 08:06:51.921
    *** ACTION NAME:() 2009-03-03 08:06:51.905
    *** MODULE NAME:(expdp.exe) 2009-03-03 08:06:51.905
    *** SERVICE NAME:(xxxxxxxxxx) 2009-03-03 08:06:51.905
    *** SESSION ID:(118.53238) 2009-03-03 08:06:51.905
    SHDW: Failure to establish initial communication with MCP
    SHDW: Deleting Data Pump job infrastructure
    is it a system memory issue for data pump? my exp works well
    How to fix this issue?
    JIM
    Edited by: user589812 on Mar 3, 2009 5:07 PM
    Edited by: user589812 on Mar 3, 2009 5:22 PM

  • InApp purchase issue for my newsstand app

    Hi,
    I am having a strange issue while subscribing for auto renewable product.
    I have created a test user account and which works fine for non renewable product and restoration. In the case of auto renewable subscription, it is asking for test account verification and couldn't test the auto renewable subscription. Why it's required for test account. Following is getting me
    Verification Required
    Before you can make purchases, you must tap Continue to verify your payment info.
    [Environment: Sandbox]
    I have created almost many test user accounts in itunesconnect now with no luck, i always sign out of the app store on the device before running the app for test, then use the test user log in when testing the iap in the app itself, but keeps saying the same thing.
    I tried all the ways mentioned in many posts for the similar issue, like not logging in to itunes account from settings page. But no luck. The strange thing is that non renewable purchase and the restoration process works fine with the same account. Any ideas? I am facing this issue for the last  week and I could release the app because of this bloody issue.
    Thanks and regards,
    Sree

    Well, what happens now when you try to purchase a gem with your new card info?

  • No Connection Type for the 10g app server in jdev 11?

    how to i connect to a 10g app sever in jdev. there is no connect type for 10g which one if any should i use?
    thanks
    Neil

    There is no direct connection to OAS 10g - note that ADF 11g applications can't be deployed to OAS 10g as they require Java EE 5.0 support.
    You can create EAR/WAR files from JDeveloper and use Ant to deploy to OAS 10g or use the OAS 10g management console to deploy those files.

  • Security issues for Flash cookies, Local Shared Objects, .sol files

    Good day, all
    I just found out a bit about flash cookies from Wikipedia and http://epic.org/privacy/cookies/flash.html
    I was wondering if there was a security issue with these (as opposed to privacy issues)?
    It seems easy enough to prevent them being stored or delete them after they are set.
    Thanks,
    Hugh

    Hello Patricia,
    You wrote,
    I came to this forum to see if I could find out how to delete adobe's flash cookies
    You have to do it online via this website.
    Macromedia's Website Storage Settings panel
    Note: As the site says, the dialogue box is not an image, "it is the actual settings manager"
    I just tried it out and deleted the flash content from How Stuff Works, then revisited the site (How Stuff Works) and it didn't add it back, so it seems to work as stated.
    regards roam

  • Where can I submit a potential security issues for OSX10.8.4?

    This morning I found a potential security bug that allowed me to access files, applications and settings for my MBP before the OS had time to confirm my login credentials. I'm sure there are people looking to exploit this so I want to know if there is a place that I can submit the issue online or via telephone.

    http://www.apple.com/feedback/macbookpro.html

  • Video Issues for Native YouTube app and all Web pages

    Hello,
    I seem to have a problem with my Sprint Palm Pre. All of a sudden Im getting an error of 'there was an error playing the file' for ALL Youtube file using the Palm Pre Youtube app. As well as all of the we sites that were working a few weeks ago.
    Any ideas?
    thanks,

    Have you tried a restart from device info, reset options? This will resolve many problems and is the first thing I would try. I have not heard of any problems with the YouTube app. I have tested the YouTube app on my own Pre Plus an it is working without any issues. Have you installed any 3rd party (homebrew) apps? Some times this can cause a problem with installed apps.

  • A "security issue" for property list in library of flash document

    Please take a look at this screen-shot I have taken from the library in a flash document.
    see in the link below, you have to copy and paste it in your browser.
    http://askervgs.wikispaces.com/file/view/library.jpg/505738374/library.jpg
    As you see the modified dates for all these components are 28 April-2014 and for last component it is 29 April-2014.
    What is strange is that the flash document itself is claimed to be created in a local exam: date on 30.April 2014 !!
    How is it possible the components in the library are modified two days before the document itself is created?
    Dose it mean that the student has had access to these components two days before the actual exam date????
    *** All other students flash documents look normal and all dates for anything they have created  i
    their flash document library are actual exam date: i.e. 30.April 2014 between 08.00 - 14:00. 
    Please help to clarify this issue?
    Thanks for any help!

    Thank you for your answer!
    They use school laptops, and I will later check the date/time on this person's computer, but something which contradicts the "wrong date" case is that I have received three more files(one open office writer text file) from the same student, all created and modified on 30. April 2014, which was the actual exam date.
    So until know it seems that this student has had access to the exam file and prepared the main fla file 2 days prior to the exam date.
    This is quite possible because we use previously given  samples in local exams, (digitally available for "some nerds").
    But technical question is:
    Do the dates listed in flash-library for created components actual dates which match users computer dates/times?

  • Tnsping issues for oracle 10g standby setup

    Hi All, i'm setting up standby database,
    i'm getting below error while doing tnsping after made all the necessary entries in listene.ora and tnsnames.ora,
    in both server listener is up and running.
    Please suggest me on this to resolve the issue,
    Primary Site
    tnsping DEVP
    TNS Ping Utility for Solaris: Version 10.2.0.2.0 - Production on 24-OCT-2011 16:09:59
    Copyright (c) 1997, 2005, Oracle. All rights reserved.
    Used parameter files:
    /arch/oracle/devora/ora10g/network/admin/DEVP_mareno/sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST =alpha)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = DEVP)))
    OK (10 msec)
    tnsping DEVPDR
    TNS Ping Utility for Solaris: Version 10.2.0.2.0 - Production on 24-OCT-2011 16:08:37
    Copyright (c) 1997, 2005, Oracle. All rights reserved.
    Used parameter files:
    /arch/oracle/devora/ora10g/network/admin/DEVP_mareno/sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = beta)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = DEVPDR)(UR=A)))
    TNS-12541: TNS:no listener
    Standby site
    tnsping DEVPDR
    TNS Ping Utility for Solaris: Version 10.2.0.2.0 - Production on 24-OCT-2011 10:21:08
    Copyright (c) 1997, 2005, Oracle. All rights reserved.
    Used parameter files:
    /oracle/soft/ora10g/network/admin/sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = beta)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = DEVPDR)(UR=A)))
    OK (10 msec)
    tnsping DEVP
    TNS Ping Utility for Solaris: Version 10.2.0.2.0 - Production on 24-OCT-2011 10:21:29
    Copyright (c) 1997, 2005, Oracle. All rights reserved.
    Used parameter files:
    /oracle/soft/ora10g/network/admin/sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = alpha)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = DEVP)))
    TNS-12541: TNS:no listener

    Hi,
    Now tnsping is working in primary site of both
    but from standby site,
    Used parameter files:
    /oracle/soft/ora10g/network/admin/sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = beta.pati.com)(PORT = 1524)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = DEVP)))
    TNS-12541: TNS:no listener
    Please suggest me on this.

  • Security issues for Java server side code

    When reading the Oracle 8i documentation regarding using JDBC
    with Java running within the database, I found that the Oracle-
    specific call 'defaultConnection()' can be used instead of the
    standard 'getConnection()'.
    This appears to be what I want to use as it avoids Net8.
    However, in the documentation it states that the user ID and
    password are ignored. Is there no way, then, of implementing
    user based security in a Java program using defaultConnection()?
    Thanks,
    null

    Hi Kiran
              See u know how to call serverside java objects from remoteobject?  If u know that every thing same that replace coldfusion and place ur java stuff
              but nothing will change at client side cairngorm architecture.. use blaze ds server to connect with the server and make a remote call to the server and have fun.
             i think u know how to initialize services in cairngorm framework and make some struff on delegate and call serverside java methods from remote object service.
              u can try this dont try for examples in the net or something.. u have a complete knowledge on cairngorm framework .. and just u want to develop j2ee applications ..
              make try with sample applications with j2ee server.. its very easy and little interesting.. make some pojos in serverside to communicate with the database and call that methods..
                i think this will help u and i dont have perfect example for serverside java code...
                   this is not and example in cairngorm and java .. but u know cairngorm  and i am posting here only the tutorial how to communicate with java methods
             read this article    http://www.adobe.com/devnet/flex/articles/file_upload.html

Maybe you are looking for