Security License for Cisco 3925

Hi,
I have got cisco 3925 without security license. Now I have got the L-SL-39-SEC-K9 license and need to install it. What is the process of installing this license.
Thanks in advance
Regards,
Mero

Here is a detailed instruction on ISR G2 licensing (including downloading, installing, rehosting license, etc.).
Usually, you just need to go to cisco.com/go/license, enter PAK and follow detailed instructions.
HTH
Alexandr

Similar Messages

Security License for Cisco 3900 Series

Hi,
I am having Security License (SL-39-SEC-K9) for Cisco 3900 Series router, Can somebody help me to provide sample config to configure 3945 router to act as firewall. Is there any difference with the native IOS based firewall config..
Regards,
Mukesh

Here is a detailed instruction on ISR G2 licensing (including downloading, installing, rehosting license, etc.).
Usually, you just need to go to cisco.com/go/license, enter PAK and follow detailed instructions.
HTH
Alexandr

User License for Cisco CUCM 7.1.3

Hi
I need 30 unit license for Cisco Communication Manager 7.1. But I found that it's already end of sale.
I want the unit license part number for cisco cucm 7.1.3 version.
And i found revised part numbers for user license (CUCM-USR-LIC ) but those for 8,x versions. If i purchase that will it support in CUCM 7.1.3?
Thanks in advance.

Hi,
CUCM 7 is already end of sale.
CUCM 7.1.5 supports UCL.If we refer the ordering guide of CUCM 8.5, you can get UCL licenses [Basic/essential].
http://www.cisco.com/web/partners/downloads/partner/WWChannels/technology/ipc/downloads/UC_8_6_OG.pdf
What I think if u place the order , you should get the licenses and at the backened, it would be DLU.
You can also speak to Cisco SE for further clarity.
regds,
aman

BTU for Cisco 3925

Can anybody confirm the BTU for Cisco 3925? I did search but not clear on the findings..

Hello,
Unfortunately this part is EoS and not supported on 3900. You can see this information here (look for Table 5.
Unsupported Modules on ISR G2 - Cisco 1900, 2900 and 3900 Series routers):
http://www.cisco.com/en/US/prod/collateral/routers/ps10538/aag_c07_563807.pdf
Hope this helps,
Nik

RME 4.3.1 Inventory collection failing for cisco 3925

Hi,
I've a customer having LMS 3.2 and RME 4.3.1. He has 14 Cisco 3925 routers out of which inventory collection for 2 fails.
Router IOS is: c3900-universalk9-mz.SPA.150-1.M.bin".
Can someone suggest what might be going wrong? Attached is the IC_Server log file for reference.
Thanks in advance,
inner_silence

Hi,
Here are the exception found from the log :-
[ Fri Mar 18 16:28:24 EDT 2011 ],ERROR,[Thread-17],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,729,Exception for device 10.103.251.12 is
java.lang.reflect.InvocationTargetException
    at sun.reflect.GeneratedMethodAccessor12.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:719)
    at java.lang.Thread.run(Thread.java:595)
Caused by: com.cisco.nm.xms.xdi.ags.system.CollectionFailed: java.lang.StringIndexOutOfBoundsException: String index out of range: 2
    at com.cisco.nm.xms.xdi.pkgs.LibInventory.EnergyWise_HelperMethods.getDeviceEnergyWise(EnergyWise_HelperMethods.java:72)
    at com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.EnergyWiseAGI_ENERGYWISE_Mib.g$eval(EnergyWiseAGI_ENERGYWISE_Mib.java:51)
    at com.cisco.nm.xms.xdi.ags.EnergyWiseAGI.g$eval(EnergyWiseAGI.java:21)
    at com.cisco.nm.xms.xdi.SdiEngine.initAndEvalAGIs(SdiEngine.java:383)
    at com.cisco.nm.xms.xdi.SdiEngine.request(SdiEngine.java:309)
    at com.cisco.nm.xms.xdi.SdiEngine.getDevRepr(SdiEngine.java:302)
    at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:539)
    ... 1 more
[ Fri Mar 18 16:28:24 EDT 2011 ],ERROR,[Thread-17],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,761, Collection failed for the device : 63
com.cisco.nm.xms.xdi.ags.system.CollectionFailed: java.lang.StringIndexOutOfBoundsException: String index out of range: 2
Kindly check if the your device is running the required IOS on the device as per the device supported list :-
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/device_support/table/lms32sdt.html
There are two 3925 listed with different versions :-
Cisco 3925 Integrated Services Router   --> 1.3.6.1.4.1.9.1.1042 --> 15.0(1)M [RME]. if this is your device then upgrade to
3925 to 150-1.M2
and
Cisco 3925E Integrated Services Router --> 1.3.6.1.4.1.9.1.1144 --> 15.1(1)T
Thanks,
Gaganjeet
If this post answers your question, please click the "Correct Answer" button

Contact Center Enhanced License for Cisco 2951 Router

Hi,
I need an urgent help to get the exact part number/details of Contact center enhanced license.
I couldn't find in CCW or any other tool about this license with Cisco 2951 Router (CISCO2951-V/K9).
To run this license on mentioned router, do we need to order it separately or we can take it with router?
Please respond asap.

Hi Andre,
I was just refering the Ordering guide which says
Updating UCSS contract when upgrading Unified CCX licenses
UCSS cannot be upgraded from one category to another (e.g. Standard to Enhanced). If
the customer upgrades within the solution, they need to purchase UCSS for greater or
equal value to cover the new version, then they can request a credit on the unused term
of the original purchase from Customer Service
you can also speak to [email protected] for more details on ESW.
regds,
aman

ASA license for Cisco IP Phone over VPN

Hi,
Are there special licenses required on the ASA to use Cisco IP Phones (Hard phone) over SSL VPN connection?
Thanks

Hi,
You can purchase the phone proxy license. This elimiates the need to build a VPN tunnel for voice traffic.
It is not mandatory to purchase this license however.
From the ASA configuration guide:
http://www.cisco.com/en/US/docs/security/asa/asa83/configuration/guide/unified_comm_phoneproxy.html#wp1144845
"The Cisco Phone Proxy on the adaptive security appliance bridges IP telephony between the corporate IP telephony network and the Internet in a secure manner by forcing data from remote phones on an untrusted network to be encrypted. "
Don't forget to rate all posts that are helpful.

Licensing for Cisco ESA c380

I am putting a recommendation together for a client to upgrade their existing Cisco ESAs and trying to figure out how the licensing works.
We are looking at c380s across multiple sites, upgrade from their current models which are c160s. Questions:
1.) Do the mailbox licenses need to be procured separately for each c380. For e.g., if the total mailbox no. is 20000 across 4 sites, can the mailbox licenses be bought together and 'split' on individual installs of c380s OR they have to be bought separately for each c380.
2.) If upgrading from the existing ESAs to new, can the licenses be imported from the existing c160s (which will be decommissioned) and exported to the new ESAs?

1) each hardware appliance is licensed separately. You'll need to work with account team/reseller to provide the #/size license as appropriate.
2) If upgrading - yes, you'll just need to transfer the existing "as-is" license from the serial number of the existing appliance to the serial number of the newly purchased appliance. Should be fairly exact to the RMA steps provided in the following article:
http://www.cisco.com/c/en/us/support/docs/security/email-security-appliance/118000-technote-esa-00.html
I hope this helps!
-Robert
(*If you have received the answer to your original question, and found this helpful/correct - please mark the question as answered, and be sure to leave a rating to reflect!)

Content Security Licensing on Cisco ASA

Hi Guys,
Need help on licensing of content security on Cisco ASAs. Hope someone would be able to help.
Our customer has a ASA5520-CSC20-K9 (default 500 users) appliance. When the appliance was first bought, they upgraded it to 750 user license and PLUS feature license. They want to renew these licenses. Kindly advise the following:
1. In order to do so, is it right that the customer has to purchase both the following (to cater to the 750 users and PLUS features)?
• L-ASACSC20-500UP1Y ASA 5500 CSC-SSM-20 500-User w/ Plus Lic. Renewal (1-year)
• L-ASACSC20-250UP1Y ASA 5500 CSC-SSM-20 250-User w/ Plus Lic. Renewal (1-year)
2. Do the renewal licenses above include BASE features (Anti-Virus, Anti-Spyware, File-Blocking)?
Thanks!
Citra

That unfortunate. It seems like with the VPN licensing they realized if you were in an active/standby configuration then you should only have to pay for one license, thus the license change in 8.3+ only requires you to purchase one license. I thought this would have carried over into IPS.
Beings we haven't failed over to the standby unit in 2 years, would it be possible to install the IPS module in both the active and standby appliances, but just license the one in the active mode? I don't care if we are running without IPS on the standby if we did have to failover for some amount of time. Or does having it licensed on one and not the other mess with being in active/standby failover mode?

Licensing for Cisco Network Topology Icons

A large collection of Cisco network topology icons is available for download at http://www.cisco.com/web/about/ac50/ac47/2.html. These icons are pretty much the standard for network topology diagrams.
I would like to know if Cisco allows the use of these network topology icons in training materials developed and sold by individuals/companies other than Cisco.

Try this
http://www.cisco.com/en/US/solutions/ns340/ns414/ns742/ns982/cvd.html link.
Thanks
Kunal

There is a trial license for Cisco CSP COLLECTOR ?

(SNTC-CSPC2.3.1.1-RC4-Build_OVF10_1)
PSS

Moving this discussion to the Creative Cloud forum.
MarilynDiPasquale if you are attempting to enter a redemption code then I would recommend reviewing Redemption Code Help. The page provides guidance on how you can redeem your code for a membership.

Enquiry on RMA for Cisco Products

Hi,
Recently i ran into some issue when processing a RMA for Cisco 3925 router.
I've RMAed the chassis but the i got the part, it didnt have a system board.
When i contacted Cisco, they mentioned that the system board can/must be RMAed separately.
Is there any documentation or list for Cisco Products that has system board as a FRU?
Thanks

Recently i ran into some issue when processing a RMA for Cisco 3925 router.I've RMAed the chassis but the i got the part, it didnt have a system board.
Before the replacment part/unit is shipped, you always get a shipping document in an email. This document will list down what item(s) are being shipped.
Did you get this?

Questions about Feature Licenses for 1800, 2800, 3800, 2900, 3900 series ISRs

Hey all,
I have a question about feature licensing for Cisco ISR 1800, 2800, 3800, 2900 series. I know there are differences between all of the series. My main question which applies for all the Cisco ISR series is this:
"If I want to upgrade the IOS to a newer version and upgrade from the basic feature set, do I need to get a license from Cisco? "
If yes:
And if so, how do I go about purchasing a license? Is a support contract needed?
Again, I need to know for each Cisco ISR series. I'd appreciate any help on this.
Thanks,
John

You probably want to reach your SE/AM about this so they can explain you exactly how this works, maybe some sales material, or you can also reach pre-sales.

Upgrading license for more context cisco asa 5580

Hi guys:
This is the situation I got to firewalls with failover and I need to upgrade the license so I can get more context (right now I have 5 context and I need 10) so I was looking at the procedure and I'm not sure If I need to restart the device or not. I was looking at this procedure:
Upgrading the License for a Failover using ASDM (No Reload Required)
Use the following procedure using ASDM if your new license does not require you to reload. This procedure ensures that there is no downtime.
•1.       On the active unit, choose Configuration > Device Management > High Availability > Failover > Setup, and uncheck the Enable Failover check box. Now click Apply. The standby unit remains in a pseudo-standby state. Deactivating failover on the active unit prevents the standby unit from attempting to become active during the period when the licenses do not match.
•2.       Choose Configuration > Device Management > Licensing > Activation Key, and enter the new activation key that you obtained with the active unit serial number. Now click Update Activation Key.
•3.       Log into the standby unit by double-clicking its address in the Device List. If the device is not in the Device List, click Add to add the device. You might be prompted for credentials to log in.
•4.       Choose Configuration > Device Management > Licensing > Activation Key, and enter the new activation key that you obtained with the standby unit serial number. Now click Update Activation Key.
•5.       Log into the active unit again by double-clicking its address in the Device List. Choose Configuration > Device Management > High Availability > Failover > Setup, and re-check the Enable Failover check box.
•6.       Click Apply. This completes the procedure.
link: http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a00806b1c0f.shtml#norelasdm
But then I checked on the cisco web page that there are some license that need to reload I see this:
All models
Downgrading any license (for example, going from 10 contexts to 2 contexts).
Note If a temporary license expires, and the permanent license is a downgrade, then you do not need to immediately reload the security appliance; the next time you reload, the permanent license is restored.
link: https://www.cisco.com/en/US/docs/security/asa/asa81/license/license81.html
So I just want to know if I'm UPGRADING from 5 to 10 context the reload applies to my situation or not?
Regards

No reload is required when you are upgrading from 5 to 10 security context license.
Reload is only required on the following feature:
http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/license.html#wp1361750
Hope this helps.

AnyConnect for Cisco VPN Phone demo license

I want to test VPN Phone in the ASA5520,but "show ver" find the "AnyConnect for Cisco VPN Phone : Disabled", www.cisco.com/go/license i didn't find register AnyConnect for Cisco VPN Phone demo license, how to apply for the demo license??
Licensed features for this platform:
Maximum Physical Interfaces    : Unlimited
Maximum VLANs                  : 150
Inside Hosts                   : Unlimited
Failover                       : Active/Active
VPN-DES                        : Enabled
VPN-3DES-AES                   : Enabled
Security Contexts              : 2
GTP/GPRS                       : Disabled
SSL VPN Peers                  : 2
Total VPN Peers                : 750
Shared License                 : Disabled
AnyConnect for Mobile          : Disabled
AnyConnect for Cisco VPN Phone : Disabled
AnyConnect Essentials          : Disabled
Advanced Endpoint Assessment   : Disabled
UC Phone Proxy Sessions        : 2
Total UC Proxy Sessions        : 2
Botnet Traffic Filter          : Disabled
This platform has an ASA 5520 VPN Plus license.

Hi there,
Did you try
https://tools.cisco.com/SWIFT/LicensingUI/loadDemoLicensee?FormId=717
Cheers!
Rob
"Why not help one another on the way" - Bob Marley

Security License for Cisco 3925

Similar Messages

Maybe you are looking for