Security mode changes

Hi,
If we change the authentication mode from windows authentication to mixed mode, the service restart is required?
Thanks
Shashikala

Hi,
If we change the authentication mode from windows authentication to mixed mode, the service restart is required?
Thanks
Shashikala
Yes it is required.
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Similar Messages

Security Mode Reverts back to "Disabled"

I am NOT able to change the wireless security mode of my router (WRT54G-V5) from "Disabled" to "WPA-Personal" or any other mode. After I select the "WPA-Personal" option from the drop-down menu, the page refreshes automatically and the security mode changes back to "Disabled".
Your help is very much appreciated.
FYI:
I have tried all the following but still could not change the security mode:
1. Master resetting the router
2. Upgraded the firmware to the latest version
3. Tried mutiple browsers
4. Disabled "Wireless Access Web" under Administraion/Management settings. System is only cable connected.

You mentioned in your post that you upgraded the firmware. So, after firmware update did you reset the Router? After successful firmware upgrade you need to reset the router. It is recommended to reset the router once. Steps to reset the router:
Push the reset button on router for 30 seconds, turn off the router wait for 30 seconds and then power it on. Power light should blink when you perform the reset process.
After reset, reconfigure the router and then check whether the issue still persists.

WRTG42 v1 Need help with changing the Security Mode

I need to change my wireless security mode but for some reason whenever I try to change anything the website automatically puts what ever I changed back to normal. Basically, I try to change an option and the website changes the option back instantly. Has anyone else had this issue? And if so, can you please walk me through what you did? Thanks!

Try using a different browser and make sure you click on Save Settings after changing security settings. Here's a link for detailed instructions.

BI Publisher with Oracle e-Business Suite 11i in EBS security mode

Seems I submitted below in wrong forums earlier so posing to correct one now. Appreciate any help.
Hi All,
I want to configure BI Publisher that comes as a part of OBIEE in Oracle E-Business Suite security mode. My Oracle E-Business Suite 11i runs on 3 node RAC database and 3 node apps tier/cm tier. As per configuration guide, I changed security mode in BIP to 'Oracle E-Business' and uploaded DBC file from E-business suite Web&Forms tier. In DBC file TWO_TASK parameter has value of test_806_BALANCE which is just an alias in tnsnames.ora for load balancing. Now when I go to BI publisher and click on 'Roles and Permission' tab in security center, it gives me 500 Internal server error.
But if I change this TWO_TASK value to any particular RAC instance sid, I am able to see all responsibility in Roles and Permission tab. This seems that BI Publisher makes jdbc connection url to database on the fly by reading DB_HOST, dB_Port and TWO_TASK parametes from dbc file and due to this my BI Publisher is single point of failure if the RAC instance goes down which I mentioned in DBC file. Even though E-Business Suite is in HA, BI publisher is not taking advantage of this HA db.
Any one has idea how to over come this situation.

You can try for a luck by posting the thread in BI Publisher Section of this Forum..

Kernel security level changes on its OWN?

Hi...
using OS 10.3.9 on a G4 dual 533mhz with a gig of ram. It is wired into an Airport Extreme that firewalls for a wireless laptop as well, yes it is set encrypted and unauthorized NIC card addresses are excluded in the Airport Administration software...
I dont have Little Snitch set to run automatically, but it appears as having launched before the last kernel panic. (so says Crashreporter_
The kernel panic happened between the time this computer was put in user log in window Sleep Mode yesterday and when I woke it up today to log into one of the user accounts (I am the only one to have maintenance/Full Admin. access)
The typical user log in screen with the names was up, but a kernel panic had overlaid the visual... parts that made me perk up was the last line said it was waiting for debugging to occur... the NIC address of the network card was shown, and the IP number that is set in the Network panel...
I checked through Onyx into the System log Crashreporter and found the stream of log info during the 'wake up' mode:
Jan 22 22:28:16 localhost init: kernel security level changed from 0 to 1
Jan 22 22:28:16 localhost loginwindow[205]: Sent launch request message to DirectoryService mach_init port
I have never seen a kernel security change in any of the logs in the past... No new user accounts were made, and no new levels of access have been assigned to existing users...
What does this mean, a level 1 setting of a kernel? Should I Admin Panic along with the kernel?

Basically, the change means that the kernel is going from insecure to secure mode, which prevents the sappnd and schg flags from being turned off. More information is available on this page.
(19398)

NFS does not recognize security mode

Hello,
I want to add kerberos authentication to nfs.
The kerberos client works, since I can authenticate principals and gt tickets.
The keytab file for nfs/my.host looks like it should as described in the sysadmin manual.
-bash-3.00# klist -k
Keytab name: FILE:/etc/krb5/krb5.keytab
KVNO Principal
5 nfs/[email protected]
Mounting volumes without a security mode is no problem.
I have changed the /etc/nfssec file to look like this (also according to the sysadmin manual):
krb5 390003 kerberos_v5 default - # RPCSEC_GSS
krb5i 390004 kerberos_v5 default integrity # RPCSEC_GSS
krb5p 390005 kerberos_v5 default privacy # RPCSEC_GSS
I have restarted network/nfs/server to make the changes take effect.
Now, when I want to share a volume I get an error message:
#share -F nfs -o sec=krb5 /export/testvolume
share_nfs: Invalid security mode "krb5"
Any help is much appreciated
TIA
Jan

make sure krb5 is not commented out in /etc/nfssec.conf

Toshiba A15-S129 Security mode frozen

I have Toshiba A15-S129 laptop, Serial Number 93131608P, BIOS ACPI Version 1.20., HDD 40GB 2128 B
Recently my laptop went to sleep mode and could not wake up, so I was turn it off.
After that, HDD gone to Security mode frozen (diagnostic by HDAT2 ).
BIOS does not have password and I can enter in BIOS menu. I can also boot computer from CD.
Can you tell me how to recover my hdd?

sasha,
Try this. If the supervisor password is clear, then set a password as the supervisor, save changes, restart the computer, remove the supervisor password, and then save changes. Completely power down the laptop and restart it. The frozenhdd should be unfrozen.
Sasa wrote:
I have Toshiba A15-S129 laptop, Serial Number 93131608P, BIOS ACPI Version 1.20., HDD 40GB 2128 B
Recently my laptop went to sleep mode and could not wake up, so I was turn it off.
After that, HDD gone to Security mode frozen (diagnostic by HDAT2 ).
BIOS does not have password and I can enter in BIOS menu. I can also boot computer from CD.
Can you tell me how to recover my hdd?

Adding Polycom HDX8000 to TMS with security mode

I have been adding Polycom HDX8000 to Cisco TMS but doing so i had to disable security mode on HDX8000 which enables SNMP (SNMP needs to be enabled on HDX8000 to get identified during adding process in TMS)
I am able to add HDX8000 to TMS but in doing so the HDX is now being accessed using http since security mode is disabled.As per the security norms all HDX's needs to have secured web access (https), if i enable security mode on HDX then SNMP is disabled resulting in TMS loosing control over HDX (error on TMS:"no snmp response")
Basically i want to enable SNMP at the same time have https only access to HDX8000
Has anybody else encountered the above mentioned situation ?
TMS 14.4.0
hdx8000- 2.5.1 - 3.1.6

In order for TMS to control the Polycom HDX, you'll need to disable Secure Mode. How to setup TMS and the HDX to work together, see the TMS Product Support Guide, it's outdated being it was for TMS 13.x, but it's still valid when it refers to the HDX and what needs to be configured. It mentions about disabling Secure Mode, and using a security profile of medium or below. Just from looking at the Polycom HDX Admin Guide, on pg 311 at the medium security profile details, it looks like you could tweak the security profile when secure mode is disabled and maybe change the web port to 443 instead of 80, though this is just a guess and untested.

Performance Issues with Acrobat Reader 11.0.0.2 when secure mode is enabled

Hello All,
We are experiencing sporadic issues with Acrobat 11.0.0.2 across our domain, users are reporting performance issues when opening PDF documents whether locally or from a network share.
We have found that turning off Secure Mode helps towards reducing this delay and in the cases it doesn't we are repairing the installation and/or reinstalling the application.
Due to the security implications we need to leave this turned on, I am wondering if anyone has encountered this issue and what steps were taken towards resolving it?
I also wonder whether the white list function in the new release 11.0.0.3 would be a solution to this issue?
Kind Regards,
Ryan McCarty

No probelm, so....
We had no problems with Adobe Reader 9 and 10, we encountered the issues when upgrading to 11.0.0.2.
Initially we found that turning off the Protected Mode, helped but did not resolve the issue.
We tried;
1. Turn off protected mode - issue still present
2. Clearing the recent file registry using the below registry path and deleting the keys underneath it.
HKEY_CURRENT_USER\Software\Adobe\Acrobat Reader\11.0\AVGeneral\cRecentFiles (this does not turn recent files off permanently). - works but needs clearing regularly
3. Turning off welcome screen by creating - HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Adobe\Acrobat Reader\11.0\FeatureLockDown\cWelcomeScreen - works to improve app open speed.
4. uninstall/reinstall of 11.0.0.2 - works most likley due to the recent files being cleared.
5. upgrade to 11.0.0.3 - issue still present
Following reboots the issue is still present.
When Adobe Reader is the only application open this issue is still present.
As mentioned I have no systems available which I could test this issue using 11.0.0.1 as we have fixed them, albeit temporarily using the reinstall method.
I am concious that this issue is going to reoccur once that cache (recent files) builds back up because the fix above (#2) is clearing the recent files cache NOT disabling it.

Gnu readline with vi mode change visualization

After a lot of searching how to get some kind of vi mode indicator working with GNU readline I've decided to hack readline myself. It's working fine for me and because I'm happy archlinux user I've decided to share my findings here, so maybe somebody will find it useful too.
there is a patch to readline needed - I've created AUR package readline-vi-mode-changed-hook
additional logic / configuration to provide your visualization
To not double post what I've already wrote in more detailed way, here is the link to my personal blog where I've documented the whole thing.
There are however few things still bugging me and maybe somebody will be able to help me with that. The particular thing which I would like to solve is to get escape sequence for changing cursor color working inside screen and tmux. I've found trick for screen but what is expectable is that when switching windows the cursor color is not reset by screen to last color set in particular window. Because cursor color sequence is not really a standard nor part of termcap / terminfo I feel it will not be so easy / possible ?
Last edited by mirci (2010-10-11 19:26:06)

Sara wrote:Am using this with GNU screen, and it works great (no change in cursor color, of course, but I think I actually prefer that, as it isn't inconvenient to look at the window title in DWM). Thanks for sharing the patch--I don't know how I ever lived without it
Well I started with the window title as I use Xmonad, then I realized that looking up or down on screen isn't very convenient for me (mainly because of a big screen I have) but it's still fine, so I was thinking about visualization which would be closest to the prompt location, cursor color was natural choice however it is not very reliable in terminal multiplexers and in general. The latest and my favorite now is the change of prompt itself (eg. bold version).
Anyway thanks for feedback, firstly when published this I thought nobody is using VI mode with readline judging based on almost no feedback at all. It's cool that at least somebody found this patch useful .
lavandero wrote:
Would you be interested in porting this to NetBSD editline (libedit)?
Open/FreeBSD also use it, just in case that qualifies as incentive.
I don't use any application which uses editline. I know it just in the meaning that it is implementing similar functionality as readline do. I guess then some applications usually can be compiled with readline or editline (if author thinks it can be useful based on different licenses and so on) ... does the *BSD systems do it that way ? Anyway I have editline in my mind if I would maybe implement some application where I would need readline functionality. Readline is fine but to be honest I found the source code of it not very nice. So to your question ... as I'm not user of the editline so far I am not planing to port this patch there anytime soon.
Just out of my curiosity which let's say well known applications can be compiled against readline and editline, is it out of box provided by upstream or usually patches are done for it. How it works in *BSD then ? In my archlinux box I frequently use mainly 2 readline applications (bash, i/python).

Logs for 'Operating mode' change in mirroring

Logs for 'Operating mode' change in mirroring
Hi Everyone,
Is there any log,that shows when the Operating mode of a database involved in mirroring(SQL SERVER 2008 R2) has been changed from asynchronous to synchrous(or vise versa).
Regards,
Aspet
A.G

Try looking into trace log files
DECLARE @filename VARCHAR(100), @filenum int
SELECT @filename = CAST(value AS VARCHAR(100))
FROM fn_trace_getinfo(DEFAULT)
WHERE property = 2
AND traceid = 1
AND value IS NOT NULL
SELECT @filename
SELECT @filename = substring(@filename, 0, charindex('_', @filename)+1) + convert(varchar, (convert(int, substring(left(@filename, len(@filename)-4), charindex('_', @filename)+1, len(@filename)))-4)) + '.trc'
SELECT @filename
SELECT gt.EventClass,
te.Name AS EventName,
gt.TEXTData,
gt.NTUserName,
gt.NTDomainName,
gt.HostName,
gt.ApplicationName,
gt.LoginName,
gt.SPID,
gt.StartTime,
gt.EndTime,
gt.ObjectName,
gt.DatabaseName,
gt.FileName
FROM [fn_trace_gettable](@fileName, DEFAULT) gt
JOIN sys.trace_events te ON gt.EventClass = te.trace_event_id
WHERE EventClass = 116
AND TEXTData LIKE '%Alter
database%'
ORDER BY StartTime;
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Blog:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance

The dreaded 404 message using basicHttpBinding, Transport security mode, and certificates

I am working on setting up a WCF service using mutual authentication with both client and server certifiates. The service is hosted in IIS 7, and I'm trying to access it from a simple console app. When I try to connect to the service, I get the error ""There
was no endpoint listening at
https://localhost/IISHostedService/MyService.svc that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more details." The inner exception is "The remote server returned an error:
(404) Not Found."
I have seen people all over the net reporting this error, but so far none of their fixes work for me. I have an HTTPS binding in IIS for my app, and I am able to browse to my service (using either http or https) and view it with no problems. I can get the
wsdl (also over either protocol) with no issues, but connecting from the client doesn't work.
Here is my server config:
<system.serviceModel>
<behaviors>
<serviceBehaviors>
<behavior>
<serviceCredentials>
<serviceCertificate findValue="ServerCertificate" storeLocation="LocalMachine" x509FindType="FindBySubjectName" />
<clientCertificate>
<authentication revocationMode="NoCheck" />
</clientCertificate>
</serviceCredentials>
<serviceMetadata httpGetEnabled="true" httpsGetEnabled="true" />
<serviceDebug includeExceptionDetailInFaults="true" />
</behavior>
</serviceBehaviors>
</behaviors>
<serviceHostingEnvironment multipleSiteBindingsEnabled="true" />
<bindings>
<basicHttpBinding>
<binding name="BasicHttpBinding_MyService">
<security mode="Transport">
<transport clientCredentialType="Certificate" />
</security>
</binding>
</basicHttpBinding>
</bindings>
<services>
<service name="MyService">
<endpoint binding="basicHttpBinding" bindingConfiguration="BasicHttpBinding_MyService" contract="Namespace.IContract" />
</service>
</services>
</system.serviceModel>
And my client:
<system.serviceModel>
<behaviors>
<endpointBehaviors>
<behavior name="clientEndpointBehavior">
<clientCredentials>
<clientCertificate findValue="ClientCertificate" storeLocation="LocalMachine" x509FindType="FindBySubjectName"/>
</clientCredentials>
</behavior>
</endpointBehaviors>
</behaviors>
<bindings>
<basicHttpBinding>
<binding name="BasicHttpBinding_MyService" closeTimeout="00:10:00"
openTimeout="00:10:00" receiveTimeout="00:10:00" sendTimeout="00:10:00"
allowCookies="false" bypassProxyOnLocal="false" hostNameComparisonMode="StrongWildcard"
maxBufferSize="65536" maxBufferPoolSize="524288" maxReceivedMessageSize="65536"
messageEncoding="Text" textEncoding="utf-8" transferMode="Buffered"
useDefaultWebProxy="true">
<readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384"
maxBytesPerRead="4096" maxNameTableCharCount="16384" />
<security mode="Transport">
<transport clientCredentialType="Certificate" />
</security>
</binding>
</basicHttpBinding>
</bindings>
<client>
<endpoint address="https://localhost/IISHostedService/MyService.svc behaviorConfiguration="clientEndpointBehavior"
binding="basicHttpBinding" bindingConfiguration="BasicHttpBinding_MyService"
contract="Namespace.IContract" name="BasicHttpBinding_MyService" />
</client>
</system.serviceModel>
I am not sure if it matters, but this client and server are running on the same physical machine in a test environment. I have confirmed that both the client and the server certificates are installed, and that the issuing authority is trusted. The virtual
folder is set in IIS to "Accept" client certificates, and SSL is not required.
Does anyone have any thoughts what I may be missing? This service works without a problem over HTTP, so it has to be somehow related to the certificate that is being passed. With the Server certificate, I just trapped the ServicePointManager.ServerCertificateValidationCallback
event to manually approve the certificate if the subject matched what I was looking for (the subject does not match the domain name, since this is a test environment). Do I need to do something similar for the client certificate?
EDIT: One thing I do notice is that, in the WSDL, the soap location is always pointing to http. I'm not sure if that is correct or not:
<wsdl:service name="MyService">
<wsdl:port name="BasicHttpBinding_MyService" binding="tns:BasicHttpBinding_MyService">
<soap:address location="http://computerName.domain.com/IISHostedService/MyService.svc" />
</wsdl:port>
</wsdl:service>

A little more information (since this is the main thing I have to work on today):
After some research, I decided to try using a custom certificate validator, in case something is wrong with the client certificate. In the clientCertificate\authentication node on the server, I set the certificateValidationMode="Custom" and set customValidationType="MyType.Validator,
MyType". My type is apparently being found (when it is not found I get a "service could not be activated" error), but my Validate() method is never being called.
Now this leads me to believe that it's not a problem with the client certificate, but something else, before it even gets that far.

Cant get Security Mode to work on WRT54G

I have everything set up fine.. internet working etc but I cannot get security mode to work.. I go to click on WEP, WPA.. whatever and it just autos back to DISABLED.. Anyone to fix this?

how many computers do you have?
try to use other computers in setting up the security. check also the firmware of your router.make sure you have the latest one.

Security settings change when rendered from third party Windows 2008 R2 server

We created a fillable PDF form in Adobe Acrobat and made it Reader extended. Opening the form on a local hard drive the security settings show that Signing: is Allowed. We can sign documents in the form with a signature pad.
After we upload it to a third party Windows server 2008 R2, and we later go to access the form, the server renders it back to us in Adobe Reader. We are unable to digitally sign documents in the form with a Topaz signature pad. We notice that although the form was originally created with the form being Reader extended the security settings change to Signing: Not Allowed.
How can we get the server to render the document back to us where we can digitally sign documents in the form?

The second file still shows the extended rights header is present (it's warning you about restrictions at the top of the dialog while also reporting the method is "no security") but the digital signature which grants those extended rights will be invalidated if *anything* in the file structure is changed. I suspect in this case that the server software is doing something to your file; it may be trivial such as adding an XMP tag, but it's enough to break the hash check.

Security Mode Feature in ATAPI HD's provided by Apple

Hello, I'd like to know how would I implement the security mode feature for the hard drive provided by Apple in MacBook Pro and if it will or not have any problems with EFI.
How will EFI manage this feature of ATA hard drives?

This article will help (about 1/2 way down).
http://support.apple.com/kb/HT1212
Barry

Security mode changes

Similar Messages

Maybe you are looking for