Security Mode Reverts back to "Disabled"

I am NOT able to change the wireless security mode of my router (WRT54G-V5) from "Disabled" to "WPA-Personal" or any other mode. After I select the "WPA-Personal" option from the drop-down menu, the page refreshes automatically and the security mode changes back to "Disabled".
Your help is very much appreciated.
FYI:
I have tried all the following but still could not change the security mode:
1. Master resetting the router
2. Upgraded the firmware to the latest version
3. Tried mutiple browsers
4. Disabled "Wireless Access Web" under Administraion/Management settings. System is only cable connected.

You mentioned in your post that you upgraded the firmware. So, after firmware update did you reset the Router? After successful firmware upgrade you need to reset the router. It is recommended to reset the router once. Steps to reset the router:
Push the reset button on router for 30 seconds, turn off the router wait for 30 seconds and then power it on. Power light should blink when you perform the reset process.
After reset, reconfigure the router and then check whether the issue still persists.

Similar Messages

TS5223 After my iphone updated to ios7, it reverted back to my old icloud account which I do not know the password, do not have access to the email it sends the reset to and the reset for security options say my birthday information is wrong.

Help!!! I've lost all of my contacts and information after the ios7 update. After the update I plugged my phone into my MacBook and it reverted back to my old icloud account. I checked my MacBook and everything on there is connected to my new icloud account. I'm not sure why this has happened, but I have been trying for two days to get my new icloud account back. My phone won't allowe to log out of the icloud account it is logged into because I don't know the password. Simple solution, reset the password. Not so simple. I don't have the email address associated with the account anymore. So I attempted the security question option. When I entered my birthdate, it said that it was incorrect. I have tried multiple times and nothing will work. Can someone please help me??

If you don't know your password, don't know your security questions and don't have a rescue address or don't receive a reset email, you should contact AppleCare who will initially try to assist you with a reset email or if unsuccessful will pass you to the security team to reset your security questions for you.
If you are in a region that doesn't have international telephone support try contacting Apple through iTunes Store Support.

My ipod touch 2g a1288 wont restore. The download takes ages then ipod puts itself back in2 DISABLED mode, HELP!!

Ok so my ipod is making me really angry. If I don't figure this thing out today after trying for so long I think I'm going to take my car and repeatedly run the thing over until its in a million pieces.
Right now heres the long story which ill try keep kinda short but I do need to explain whats happened thus far
Ipod touch (2G), Mondel: A1288 which has gone into disabled mode and is basically useless at the moment.
Now I've done the thing where you hold the two buttons while plugged into laptop until itunes detects ipod in recovery mode. Then I try to hit restore, this starts up the download/ update thing which will not download because here in the dark ages of New Zealand our internet is slow. So because its so slow the ipod touch takes itself back into disabled mode! ahhhhhhhhhhhhh so FRUSTRATING
Now I'm aware that I can pre-download the firmware (which will still probably take ages but may save the ipod from timing out and going back into disabled screen) and then just hit control and select it when ipod is detected in recovery mode by itunes. The only thing wrong with doing this however, is when I go to the site to get the firmware from http://http://www.felixbruns.de/iPod/firmware/ and look in the drop down menu of 2G ipod touches, I don't see my model listed there so I'm wondering what firmware I can download for the A1288? Is it compatible with a different version? because it wasn't even listed in the drop-down menu of ipod touches.
I just wan't the thing going again! they put these things into technology that make it useless because they know the average joe like me will just give up trying to fix it and buy a new one. Well not this time, if I cant fix this, I'm going to run the thing over and that will be that!
Many thanks for reading my speal, I hope somebody can help

lol yea when i inserted the link i just copied and pasted thats why that happend... Lets try again... http://www.felixbruns.de/iPod/firmware/
Anyways when I go to it theres a drop-down list and you select the one you want and I know the number next to it identifies the model but the thing is they don't have my model listed so my main question is, what version eg. 2.1.1. or 2.2.1 etc. etc. etc. etc. will work with my model of ipod touch which is the 2g Model A1288?
Does anybody know? Does it work with any firmware thats for 2G ipod touches or do i have to get firmware thats model specific?

What would cause keynote 5.1 to stop playing slides? It reverts back to production mode.

My version of keynote on my MacBook has begun acting strange. If I say a presentation as a powerpoint it will open it and play it. If I open one saved as a keynote it will not play. It will revert back to production mode. I have a major presentation due on Monday Oct 14. I'd like to do it from my old MacBook which has served me well for many years. My other option is to save it as a powerpoint and play it on one of the agency pc laptops.

If I open one saved as a keynote it will not play. It will revert back to production mode.
Keynote will only play a presentation full screen if it has been set to do so, have you made this setting?:
Inspector > Document > Document > Automatically Play on Opening

Advanced datagrid reverts back to the ungrouped mode

I have an advanced datagrid and if I do this
BindingUtils.bindProperty(adg1,"dataProvider", this, "GroupingCollectionID");
then this
adg1.dataProvider.refresh();
the advanced datagrid reverts back to the ungrouped mode which I don't want
Am I missing something?

Hate to tell you but your OS is corrupted. Maybe someone else with more knowledge will come by and give you some things to try.
Other than a complete wipe and reinstall of OS X you could tryu reinstalling OS X over the top of the current install. That might work top at least get you into the system. If it does I suggest you backup your personal files to an external drive.

Install of latest Firefox upgrade won't complete, now having multiple problems and can't find how to revert back to previous mode.

I got a prompt to upgrade, but the install mechanism just keeps looping, says connecting but nothing ever happens. Daily I get warnings to install, and each effort ends as above. Now some of the prompt boxes (such as "are you sure you want to delete...") appear in subdued/basic mode. I was going to simply revert back to the previous edition that worked, but can't find how to do that.

I am having an issue with the Software Update also. The window says, "It is strongly recommended that you apply this update for Firefox as soon as possible"....It won't let me see the information of this update. I click on it as it highlights but nothing happens. So when I do click next it starts to update but updates all day long. It is not right. I thought maybe a virus? Could somebody tell me what to do? It is constantly happening everyday. thank You!!

Won't boot up to desktop....apple logo spin keeps on going om gray screen. Tried to start in safe mode and it reverted back to same.

My 4 year old macbook won't boot up. Stays in the same mode . Gray screen, apple logo and spinning wheel. Tried booting in safe mode but reverts back to same. Also tried resetting by removing battery. Nothing is working!! Any advise before I take it to Apple?

Try this:
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Or, if you have Lion or Mountain Lion:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

My iphone will not revert back from silent mode. It will play when i am scrolling through ringtones but when a text or incoming call comes in all it does is vibrate. Anyone having this issue??

My Iphone will not revert back from silent mode. It will play when i am scrolling through ringtones but when a text or incoming call comes in it just vibrates. Anyone having this issue??

I have the same problem with my iPhone 5c after update to iOS 8 every time i have to restart my phone to solve the silent issue

Since I loaded the last Firefox Security update, I can't play video on websites such as Netflix, how can I revert back or elimnate this issue?

Since I loaded the last Firefox Security update, I can't play video on websites such as Netflix, how can I revert back or elimnate this issue?

-> Clear Cookies & Cache
* https://support.mozilla.com/en-US/kb/Template:clearCookiesCache
-> [[How to clear the cache#w_clear-the-cache|Clear the Network Cache]]
-> Reload web page(s) and bypass the cache.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)
Check and tell if its working.

How can I revert back to the default config on Secure Access Server 5.3?

We recently purchased new Secure Access Control Servers version 5.1 and have upgraded to version 5.3 with current patches. Several people have configured one of the appliances and we would like to revert back to the original config with no NDGs or Devices or any other variables configured. Is this possible?

While looking up a command in the CLI reference, I also found the command to reset the acs to factory default. It is "acs reset-config". This resets the acs portion only, not the linux appliance, so your IP addresses, DNS, etc. are retained. It does clear out the license for the ACS, so if you use this make sure you have the license file. You will also have to go through the initial password setup again.

HT201263 while of restore mode, my ipod touch went back to disabled screen..

im restoring a disabled ipod touch....suddenly, from restore screen it went back to disable screen... what must i do?

- Try placing the iPod in Recovery mode and then restore.
- Next try DFU mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

HT201263 I have done restore and ipod keeps going back to disabled mode. What do I do next?

I have done restore and ipod keeps going back to disabled mode. What do I do next?

Do a manual install as specified here:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
After you download the firmware file as specified in the article, place the iPod in recovery mode and then do the restore/update using the instructions in the article

Why does my music player on my iPhone 4 always revert back to the same song when in shuffle mode even tho I have played multiple songs since that first song was played.very frustrated

Why does my music player on my iPhone 4 always revert back to the same song when in shuffle mode even tho I have played multiple songs since that first song was played.very frustrated

SHuffle does not play songs in a truly random fashion. Like all computer related random generators the sequence is pseudo-random

HT201263 i'm 11 and my ipod4 is in recovery mode because It's disabled I went to itunes and it said ipod in recovery mode found you must restore so i clicked ok went to files devices but it wouldn't let me click back up whats going on?

i'm 11 and my ipod4 is in recovery mode because It's disabled I went to itunes and it said ipod in recovery mode found you must restore so i clicked ok went to files devices but it wouldn't let me click back up whats going on?

Because you can't backup a device that is in Recovery mode.
You have to restore the iPod and restore from backup if you have a backup
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

How do I revert back to the old operating system? The new upgrade that came out totally disabled my WiFi and the default backgrounds changed to white instead of bla k.

An upgrade was sent to my Samsung Galaxy S5 phone on 3/27/15 and it ruined my phone. I no longer have the ability to Wi-Fi. When I swipe the phone on there is a clicking sound and the scree goes directly to my keypad. I want the phone to go to my home screen like it did before. My apps that had a black background now have a white background which is impossible to see outdoors. I want the black background back for settings, clock, and calculator. Samsung tech support says this stuff is default with the new upgrade. How do I revert back to the version I had before without having to put the phone back to factory settings and lose all my pictures, memos and other files I have accumulated over the last year that I have had the phone. I am desparate. Please help me. Send an e-mail to (removed)
>> Edited to comply with the Verizon Wireless Terms of Service <<
Message was edited by: Verizon Moderator

You cannot revert back without voiding warranty and we cannot discuss the methods to do so.

Security Mode Reverts back to "Disabled"

Similar Messages

Maybe you are looking for