Security not working after firmware update

I have a WRT610N (v2) router and I recently updated the firmware to the most current version 2.00.01 build 15. I can no longer set WPA2 security for both bands (used to work just fine). Every time I try to save settings for WPA2 for the 5 GHz band, it tells me it was successful but then displays that the security mode is disabled (and it shows up on my computers list as not having any security enabled. Is there a fix for this? If not, where can I get a copy of the old firmware that worked?

I'm on a Mac (normally) and have tried Chrome & Safari and then run Win7 via bootcamp and have tried IE.  No change.  None work.  I also tried the reset again (hold down the reset button for 45 seconds) and start from scratch to reconfigure - that didn't work either. 
Still can only P/W protect 1 of the 2 bands using WPA2 personal.  Each band has a different name and I've tried the same P/W or require different P/W, neither works.
One update though.  If I set one band to WPA2-AES and the other band to AES, it works.  But not if both are set to the same encryption scheme.

Similar Messages

  • Phone not working after firmware update for nokia ...

    I tried updating my nokia 5800 today when the new firmware was released. i have already updated my other phone including another 5800. But when I updated the firmware of another 5800 (my 5800 through nokia software updater from pc/laptop), after the nokia updater application said that the update was successful, my phone showed the nokia logo with the new firmware version. It's supposed to reboot automatically and continue as normal but after waiting for like 15 minutes, my phone's still not turning on and still showed on the screen that the phone was not connected. That's when I unplugged it off from the USB cable and tried to turn it on, but it will just vibrate for a few seconds and then nothing! It won't turn on or work! I've tried to search on how to fix this problem but to no avail.. please help me.. is my phone going to work again?
    Solved!
    Go to Solution.

    There's a section in this forum called the "Pool of Knowledge". Have you followed the instructions in this post in the PoK?
    /discussions/board/message?board.id=topfaq&thread.id=112
    Message Edited by grschinon on 02-Nov-2009 06:05 PM
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • Cisco WS-2960S-48TS-L does not work after firmware update

    Hello.
    After purchasing the Cisco WS-2960S-48TS-L decided to do a firmware upgrade using the CISCO NETWORK ASSISTANT. Unfortunately update failed. Currently the switch when you run can not load the system image.
    Since up to now I had to deal with the other switches do not really know how to upload the correct image now. The more that you connect the switch through the console acts as to a limited extent.
    Please help

    Thank you Leo Laohoo.
    Your suggestion to usbflash0 helpful.
    It is true that I was struggling because of usbflash latest iso system also did not want to go, but I recorded version of one lower and went.
    By the way, I learned that the USB must be formatted to FAT file system.
    Again, thank you for your help.
    Darek Rynkowski

  • Pioneer DVR 106D does not work after firmware update

    I tried to update the firmware of my iMac with DVRFlashX. I failed. No Superdrive is showing up in the system information. DVD can't be removed even with the firmware eject function. No Pioneer drive is found. How do I get the right firmware for the Superdive via Internet to make it work again?

    Hallo und Willkommen zu den Apple Diskussionen. 
    Thanks for taking the time to let us know what happened. I assume this Firmware wasn't supplied by Apple... What updates does it achieve?
    many thanks
    mrtotes

  • Phone not working after OS update, phone not working after OS update

    phone not working after OS update, phone not working after OS update

    I do have a questiion.  I started the most recent iOS update on my iPhone last night and before it was ever completed a message appeared on my screen.  It is a pic of the docking/charging cord with an arrow pointing to an iTunes logo...HELP!!!!!  I have tried holding down the home key and power button several times and the same message continues to appear. 

  • My facetime on iphone 4 is not working after the update to IOS7

    Hi guys, can you help me about my problem? My Facetime on Iphone 4 is not working  after The update to IOS7       Thanks xxx

    Hey Junie1387,
    Thanks for the question. I understand you are experiencing issues with FaceTime. The following articles may help to resolve your issue:
    iOS: Troubleshooting FaceTime
    http://support.apple.com/kb/TS3367
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    You may also want to reset your network settings:
    Settings > General > Reset > Reset Network Settings.
    Note: this will delete any network related settings (saved Wi-Fi passwords, etc), it will not erase any content from your device.
    Thanks,
    Matt M.

  • Videofunction on iphone 4 is not working after the update to IOS7

    Hi. The videofunction on my iphone 4 is not working after the update to IOS 7:
    Anyone else experiencing the same problem?
    Anyone with solutions?
    Thanks!

    Hey Junie1387,
    Thanks for the question. I understand you are experiencing issues with FaceTime. The following articles may help to resolve your issue:
    iOS: Troubleshooting FaceTime
    http://support.apple.com/kb/TS3367
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    You may also want to reset your network settings:
    Settings > General > Reset > Reset Network Settings.
    Note: this will delete any network related settings (saved Wi-Fi passwords, etc), it will not erase any content from your device.
    Thanks,
    Matt M.

  • C1-01 not working after Nokia update

    Hi,
    C1-01 not working after Nokia update.
    Message shows "Updating" then blank screen, any ideas?

    How did you start the update? OTA or using Nokia Suite?
    Try to run the update through Nokia Suite again.
    If I have helped you, please hit the star at the bottom of my posts - it's appreciated!
    Don't forget if your problem is solved to press the "Accept as Solution" button.

  • 1080p videos not working after fp2 update

    some videos are not working after fp2 update..videos which are worked in fp1 also not working after belle fp2 update...it sucks

    What is the phone model?
    Could you give us the url to the video on question?

  • Facebook birthdays not working after ios7 update

    Facebook birthdays not working after ios7 update?

    Did you always have the same problem or is it new? I always used to be able to get Facebook to work on wifi with no issues for months. I downloaded the new software update for Revolution, and all of a sudden it seems like they blocked the Facebook app somehow unless you're on 4G. It really sux because I can't get into my Zynga games either that are tied to FB! Wish someone at Verizon could be aware of this and fix the problem.
    Also, interestingly, when I try to log into the Facebook site with the browser I am directed to an error page. The browser works fine for every other site though. Really seems like there was some kind of block instated that will no longer let you use Facebook on a wifi connection. 

  • Airport not working after osx update-keychain?

    Hi airport is not working after the update to osx. I think I hit the wrong button when I saw:
    "Confirm Application Change
    Airport has updated. Do you want to allow the new version to access the same keychain items (such as passwords) as the previous version?
    This chain is permanent and affects all keychain items used by aiport.
    Don't Change Change All
    What should I have replied? Anyway to reset the airport or download it again?
    Thanks.
    Anyway to reset this or download again? Thanks.

    What should I have replied?
    Change All

  • Mic Jack not working after Driver Update, Console unavailable, can't install

    LMic Jack not working after Driver Update, Console unavailable, can't install? I've had nothing but problems after downloading the latest updates via the auto-updater.
    I'm currently using the Creative SB X-Fi Pro Series card. I've had it for close to 6 months and have not had any issues until I ran the auto-updater last night, and while it downloaded over 250Mb of updates, all of them failed to install as described below.
    I'm running on Windows Vista Ultimate, 64-bit
    My main issue is the fact that my microphone is no longer working. I've done a lot of searching and I think the problem has to do with flexijack not being a microphone jack, but instead is an 'in-line' jack. I can no longer find my audio control console, which allows me to switch between gaming and entertainment modes, ect. The solution I found on the KB says that you can switch the blue jack on the back of the card from an in-line jack to a mic jack within the Audio console. I tried downloading it, but while going through the install, I get an error saying the files could not be found and a prompt which asks for a disk or file location. The same thing pretty much happens with all of the items I attempted to download and install.
    I was able to run console fine, as well as use my mic yesterday before I attempted any updates. I attempted the updates because since I've had the card, I've had issues where after I exit a game, all my sound will become crackly and static. Before, I would simply open up the console and switch back-and-forth from gaming to entertainment, which would fix the problem most of the time. If that didn't work, a restart would fix it, but now I've opened up a whole new set of issues.
    Any help would be greatly appreciated.
    I also want to say that the support tickets should not require a serial number to submit a new ticket. My product is registered, so I got rid of the box which contains all that information, leaving me at the mercy of these boards...

    Hello all. Fisrt of all, this are my specs: Yoga 2 pro 13". WiFi card: Intel(R)Dual Band Wireless-AC 7260. I bought it from Best Buy on November 27, 2014. If you aquired your Yoga before this date, you may have the single band WiFi card. As many of you have experienced, I also had a bunch of issues with my WiFi connectivity and this is how I was able to solve it. At least it has been a couple of days that I haven't had any issues. The first symptom was the usual connection drops every X amount of time. For me it was about every 2 hours. I first unchecked the "Allow the computer to turn off this device to save power" option in the Power Management tab of device manager and disabled U-APSD support in the Advanced tab of device manager. This action did not solve the problem. I then downloaded and updated the driver from the Intel web site (http://www.intel.com/p/en_US/support/detect) and this seemed to solve the drops; however, a new problem arised: Everytime my Yoga would wake up from sleeping mode, all my wifi networks were gone and the adapter showed as disabled in Device Manager. I would have to anable it to have my networks back. It was a solution but a pain the butt to have to do this everytime. After hours of reading post after post in several forums, I read a repy from Lenovo asking to try leaving the "Allow the computer to turn off this device to save power" CHECKED if you were using the latest version of the driver. I went back to device manager and checked it back and that seems to have solved the problem. So far I haven't had any drops and everytime my laptop comes back from sleeping mode the WFi connection is still there! Here is a recap of how everything ended up: -The driver version I installed is 17.1.0.19-The driver date is 7/21/2014-In device manager|Advanced, U-APSD support is Disbled.-In device manager|Power Management, "Allow the computer to turn off this device to save power" is checked. Hope this helps somebody else.

  • E7 Nokia Messaging not working after anna update

    hi
    nokia messaging not working after anna update. when i
    -choose provider (hotmail/gmail/yahoo...etc)
    -enter username & password
    -click OK to T&C
    -get error message: "cannot enable this service on the device"
    any ideas?

    I'm having a similar issue. It appears to only impact Hotmail accounts. For me though, this happened without updating the OS. The email client is simply failing to connect to the Hotmail interface. Only two possibilities, either Microsoft changed something on the email gateway or Nokia changed something on their end. Either way, it's not working and has been out of commission for the past week. If this is how corporate friends get along, I'd hate to see what happens in a adversarial relationship.

  • Lumia Camera/4K not working after Denim Update

    Hi, Received the Lumia denim update this morning but after installation, the Lumia Camera app is not open (displaying a megbox that says "Lumia camera requires Lumia denim software update") and the extra+info still shows "cyan". The rest of denim update features are working fine...
    Any solutions?
    Solved!
    Go to Solution.

    farhanhadi80 schrieb:
    Received theLumia denim update this morning…
    You got the OS update to ‘Windows Phone 8.1 Update’ which was released in September 2014. You have not received the firmware update ‘Lumia Denim’, yet. Even if Extras+Info shows different – it is wrong for many users right now – you do not have ‘Lumia Denim’ yet. Furthermore, even if several new features work, those features required just the OS update, not the firmware update. Lumia Camera 5 requires the firmware update which is not yet available for your firmware variant (059W1L3). When you have ‘Lumia Denim’ the firmware revision number starts with 02540.xxx for a Lumia 930 and Lumia 1520.
    When is Lumia Denim available for 059W1L3?
    Nokia releases the firmware files in batches, and does not tell us users when. Could be hours, could be months.
    What is a Product Code?
    Every model, type, color, and even each region, country, and operator does get its own Product Code, ending-up in thousands of firmware files.
    What was the designation 059W1L3?
    Egypt, Iraq, Jordan, Lebanon, Lybia, Palestine, Pakistan.
    Do I get updates always last?
    Not in general, because sometimes countries like the UK are first, sometimes UK is last. Again, Nokia does not tell.
    Did that help?

  • WLAN not working after v30 update on N95

    I saw a previous thread about WLAN not working on the N96 after update.
    I can now confirm that WLAN is also bugged for the N95-1 after firmware update to v30.
    It tries connecting, then after a few seconds, I always get the message "WLAN: Unable to connect. WLAN network not found"
    This did not happen a few minutes before the update. Last firmware version was the v22 (latest one before v30)
    Has any fix been found? My main usage for my phone is for the wifi, and without it I can't do much

    Nokia is the host of this forum, however the forum operates and functions with the participation of common folk, users from all over the world that either share passion for Nokia or are looking for support and answers from other community members...if you want to complain to Nokia there is a : Contact us - button on top right of this page...if you want to try to find answers patience sometimes is a virtue....now the issue of untrusted software, there are applications and sometimes themes that you have installed on your memory card/mass memory that will give that message when you go to application manager it will list the apps that are installed and that are not installed on your device, you can either install them manually or remove them from your phone, the next time you restart your phone you should have no problems with those messages. now the WLAN issue i am not sure about and I am almost certain it has nothing to do with your untrasted software messages.
    You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

Maybe you are looking for