Security pass code

I am using my skype to go number from my computer rather than my mobile and it is asking me for a 4 digit securtiy code I have never to my knowlegde had one or created one what do i do know I can find anywhere on the site to deal with this??
please help

baron-jeweller wrote:
I am using my skype to go number from my computer rather than my mobile and it is asking me for a 4 digit securtiy code I have never to my knowlegde had one or created one what do i do know I can find anywhere on the site to deal with this??
please help
Hello,
We've corrected this issue so you should be able to make calls again as usual.
Please let me know if you experience any further difficulties.
Apologies for the inconvenience.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Similar Messages

How you restore your security pass code if you have disabled your iPod, due to too many pass code attempts

How you restore your security pass code if you have disabled your iPod, due to too many pass code attempts?

If You Are Locked Out Or Have Forgotten Your Passcode
iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iOS- Understanding passcodes
     If you have forgotten your Restrictions code, then follow the instructions
     below but DO NOT restore any previous backup. If you do then you will
     simply be restoring the old Restrictions code you have forgotten. This
     same warning applies if you need to restore a clean system.
A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
     1. Verify that you are using the latest version of iTunes before attempting to update.
     2. Connect your device to your computer.
     3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
     4. Select the Summary tab.
     5. Select the Restore option.
     6. When prompted to back up your settings before restoring, select the Back Up
         option (see in the image below). If you have just backed up the device, it is not
         necessary to create another.
     7. Select the Restore option when iTunes prompts you (as long as you've backed up,
         you should not have to worry about restoring your iOS device).
     8. When the restore process has completed, the device restarts and displays the Apple
         logo while starting up:
           After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
          to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
          iOS, keep your device connected until the "Connect to iTunes" screen goes away or
          you see "iPhone is activated."
     9. The final step is to restore your device from a previous backup.
If you can not restore your device then you will need to go to recovery mode.
Placing your device into recovery mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
     1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
         of the cable connected to your computer's USB port.
     2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
         red slider appears, then slide the slider. Wait for the device to turn off.
          If you cannot turn off the device using the slider, press and hold the Sleep/Wake
          and Home buttons at the same time. When the device turns off, release the Sleep/Wake
          and Home buttons.
     3. While pressing and holding the Home button, reconnect the USB cable to the device.
         The device should turn on. Note: If you see the screen pictured below, let the device
         charge for at least ten minutes to ensure that the battery has some charge, and then
         start with step 2 again.
     4. Continue holding the Home button until you see the "Connect to iTunes" screen.
         When this screen appears you can release the Home button.
     5. If necessary, open iTunes. You should see the following "recovery mode" alert:
     6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

Forgot ipod touch security pass code how do i reset

does anyone know how to reset a password on a ipod touch

If you do not use its syncing computer and sometimes anyway, you have to place the iPod in Recovery mode in order to restore.

How do you reset pass code to install security update.

I am trying to install the latest security update and I'm being asked for the security pass code which I have forgot, how do I reset it.

Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
A
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software.

HT5622 I just got an I pad mini and I already forgot my pass code to get in how do I change it?

I Just got an I pad mini and I already forgot the security pass code to get in what do I do

I Just got an I pad mini and I already forgot the security pass code to get in what do I do

I know my Apple ID (an email and pass code) good,but really I forgot answers the security questions (2-questions) which verify my identity.I can not complete any purchase process for iTunes from another device for example (my personal computer)

Hi,
I know my Apple ID ( an email and pass code ) good, really
I forgot answers the security questions,which verify my identity,
So it is difficult to complete the purchase process for iTunes Store
On my PC-FUJI'S,I use Windows Vista home premium as Operating
System,so reset my secure questions and the answers of course,
If you please.
With my respect,
A signature,
Mahmoud Fouad El Deeb.

Hello Mahmoud,
The steps in the articles below will guide you in setting up your rescue email address and resetting your security questions:
Rescue email address and how to reset Apple ID security questions
http://support.apple.com/kb/HT5312
Apple ID: All about Apple ID security questions
http://support.apple.com/kb/HT5665
If you continue to have issues, please contact our Account Security Team as outlined in this article:
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Thank you for using Apple Support Communities.
Best,
Sheila M.

HT2693 What's pass code before I download recent update for security .

What is a pass code before updating system

Welcome to the user to User Technical Support Forum provided by Apple.
Clearly state your Issue and the Troubleshooting Steps you have tried to Resolve it.

HT5012 security flaw when entering pass code

When entering your pass code/password to access your phone, is there not a way to turn off the 'glowing' effect after you hit each number/letter? Seems like it will be easier for someone to find out you pass code by looking over your shoulder. IMHO

Great, thanks.

HT1222 I downloaded ios 7.0.2 onto my i-pads at my home. I put in a pass code for the pass code lock, but would now like to remove it. When I go the general area on my i-pad settings it will not let me delete the pass code. I don't want the pass code p

I installed ios 7.0.2 on my i-pads and now want to delete the pass code, which I originally put in. I no longer want the hassle of the pass code, but cannot figure out how to delete it. I do not want the additional security.

Settings>General>Passcode Lock. Tap the arrow to the right on that line. Enter your Passcode. In the next window select Turn Passcode Off. Enter your passcode again to confirm.

I reset my iPhone 5s yesterday because my fingerprint bottom is not working. It says that failed every time I was trying to put my print... Now that I reset my phone the fingerprint pass code do not appear in the setting.

I reset my iPhone 5s yesterday because my fingerprint bottom is not working. It says that failed every time I was trying to put my print... Now that I reset my phone the fingerprint pass code do not appear in the setting.

Hi Emilemny,
Welcome to Apple Support Communities.
The TouchID settings will not be available until you create a passcode, see the article linked below for more information.
iPhone 5s: Using Touch ID
http://support.apple.com/kb/HT5883
You can set up Touch ID in iOS Setup Assistant or by tapping Settings > Touch ID & Passcode. To set up Touch ID, you must first set a passcode. Touch ID is designed to minimize the input of your passcode, but you need a passcode for additional security validation, such as enrolling new fingerprints.
-Jason

HT201365 How do I change settings so I do not have to enter pass code all the time?

How do I change sttings so I do not have to enter pass code all the time?

The passcode is a key security feature to ensure that nobody has access to your device and data without you entering the passcode in. You can only have the option to have it on or off so if you wish to disable it then go to "settings>general>passcode lock" to do this.

HT201210 how do i recover my pass code that i forgot?

i need to get on my ipad but i forgot the passcode and i tryed to updade back up but i have to put in the pass code. how do i recover it or access my ipad without lossing my photos, notes, ect??? help me please.

Your only option is to restore the iPad. Follow the instructions in the following:
http://support.apple.com/kb/HT1808
There is no way to recover the passcode. It is very secure.
You will lose whatever was not backed up as of its last synchronization. Anything that you downloaded from Apple can be downloaded again.

How do I change name and install Password or pass code

How do I change name and install Password or pass code?

You would do this using the AirPort Utility.
To change the Network Name using AirPort Utility v6.x: AirPort Utility > Select your AirPort > Edit > Wireless tab > Wireless Network Name. On the same tab, you can set the wireless security password.

HT5622 What is a pass code

Trying to update by installing a notified item in settings.
Being asked for a pass code.
What is this ?

This is the security code that you previously set. The one you use every time you open your iPad.

Pass code unlock option no long available on my Iphone4

Please help. I can no longer see the pass code unlock option on my Iphone4. Although I realize the importance of security, this feature can become a nuisance when you have to continuously type in the pass code. I do not have Microsoft Exchange or is it tied into corporate email. My Iphone is for personal use only. This is extremely frustrated when driving and you need to type in the pass code in order to reach the phone pad. I am on version 4.3.5. With the focus on driving and texting, I am surprised Apple would run the risk of forcing someone to type a password while driving. Thank you.

Thank so much for the quick response. Took your advice and everything appears to be working!!!

Security pass code

Similar Messages

Maybe you are looking for