Security password problem

please is ther anyone could help me with my problem, i have forgot my security password for my xperia ray. please help me to retrieve it. its been 2 days now that i ain't able to open my smartphone. thank you

We would recommend that you repair the phone software. Please follow these instructions carefully:
Visit:   http://www.sonymobile.com/us/tools/pc-companion/
Turn the phone off and disconnect it from the computer.
Run the Software:
1 . No matter what the program says do not connect the phone until you complete step 9.
2. In the welcome screen if asked click on Start, next you will be shown what Media Go offers, click on "next" then you will see a presentation on what Support Zone offers, click on "Finish".
3. In the next section from "Support Zone” and "Media Go" new select “Support Zone "    and click on start.
4. On the next page select "Software Update" and click on "Start".
***At this point if you get an error stating that "unable to install update components" or "server is busy”, please proceed to step 12.
5. The program will say that there is no phone connected and will ask you to connect but disregard that and instead choose the option to "Repair Phone". (The program will issue you a warning on the content that you will lose during the update).    Please be aware that any data saved only in your phone memory will be erased as part of the Phone Repair.
6. Choose Continue.
7. After that, the program will download the necessary information (several minutes) and it will present you with a list of phones.
8. Choose your phone model (close to the bottom of the list) by clicking on the icon for the phone. Then click on "Next".
Then you will see a new section telling you how to connect the phone. (Don't connect it yet!).
9. Connect the cable to the PC but not to the phone, then while pressing and holding the back key connect the cable to the phone and keep holding the back key until the program says "The update of your phone has started..." (In some cases a message of "Installing drivers" will appear before the message of "The update of your phone has started..." is shown.)
10. If the steps were not followed exactly the phone will turn on and it will request that you "Proceed with the following steps, slide down the notification bar".    If this happens disconnect the phone from the cable, turn it off and repeat from step 9).
11. If PC Companion proceeds correctly with the update it will tell you to release the back key.    Wait for the update to finish and follow instructions on the screen.
12. If you receive the message: “Unable to install update components"
a. Close Pc Companion
b. Install Java from: http://www.java.com
c. Start Pc companion again and try to do the software update process once more.

Similar Messages

  • Problem with Client Security Password Manager won't let me open it?

    Win7
    32-bit
    IE-10
    Client Security Password Manager 8.30.0057.00
    It allows me to save passwords.
    It will not allow me to get into the program to check/edit/delete the password info.
    Fingerprint software 3.3.2.43 is working correctly.
    Also does not let it auto-fill.
    Have tried un-installing and re-installing.
    Please advise.
    Thanks!

    Hi 
     You could try the new password manager.
     http://support.lenovo.com/en_US/downloads/detail.page?&DocID=DS031504
    Or you could try to delete all the files,
    Find Client Security Solution in user profile folder (Search hidden), and delete them all.
    And restart system.
    Before doing this, remember to export passwords

  • Security and password problem-AE

    Why did I have to disable the WPA2 security password on my iMac G5 in order for my iBook G3 to connect to the network? How can I set up a secure network that works with both computers?
    iMac G5   Mac OS X (10.4.6)   iBook G3 (10.2.8)

    Welcome bliphouse,
    Bummer about what iFelix mentioned regarding the compatible issues with ibook G3's.......but WEP is still a good security setting....
    Below is what I posted just moments after iFlex's post.....it might be helpful.
    This is what I just did about an hour ago....I changed my security from WEP to WPA2 Personal. What I had to do, with help from Hitheringwaters and um:
    You probably already did this......
    Open Airport Admin Utility, select your AE, click on Config, make sure Airport button is selected, change wireless security to WPA2 Personal, add your new password and click ok. make sure you select Update...close Airport admin utility.
    open Network preferences, highlight Airport then click on Config, make sure Airport button is selected, then "By Default Join: select preffered networks, delete your network. close Network Prefs, open up Network prefs again and add your network back with a new password and don't forget to Update.
    this is what I just did for my Powerbook G4 and iBook G4.....and i have WPA2 Personal security on my AE network.
    I hope this wasn't to confusing but helpfull.
    Powerbook G4 1.67 15", 1 gig ram, 128 vram, 80 gig harddrive   Mac OS X (10.4.6)   Powermac G3 266 mt, Dell 5150,ibook G4, 1 gig shuffle, epson printers, airport

  • How to change security password  in ipod 5

    How to. Change security password in ipod 5

    maybe this:
    Forgotten Security Questions/Answers
    You need to contact Apple by:
    1 - Use the Express lane and start here:
    https://expresslane.apple.com
    then click More Products and Services>Apple ID>Other Apple ID Topics>Forgotten Apple ID security questions.
    or
    Apple - Support -form iTunes Store - Contact Us
    2 - Call Apple in your country by getting the number from here:
    http://support.apple.com/kb/HE57
    or           
    Apple ID: Contacting Apple for help with Apple ID account security
    3 - Use your rescue email address if you set one up
    Rescue email address and how to reset Apple ID security questions
    For general  information see:
    Apple ID: All about Apple ID security questions
    or this
    Forgotten Screen-Lock Passcode
    Connect the iOS device to your computer and try to make a backup
    iOS: How to back up
    Then restore via iTunes. The iOS device will be erased. Place the iOS device in Recovery Mode if necessary to allow the restore.
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store   
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • T61p - Please wait while Windows configures Client Security Password - Manager

    My T61p system is fully updated, however I continue to get "Please with while windows configures Client Security Password - Manager." and then the computer trys to install
    css_manager_vista_tpm.exe
    over and over again.
    What is the problem here and how can I solve?
    How can I contact Lenovo-Thinkpad to assist?
    The problem has reoccured even after I did a system restore to an earlier date.
    It seems to initiate when I first boot up and then open up "Pictures"
    Please help.
    Thanks

    Well, I take everything back. After removing all password entries and re-installing/rebooting, it worked for a while. But now it is doing it all over again. I tried to call techincal support, but they then said I would have to pay for software support and they only support hardware, and to re-install the OS. Great, jeez, I couldn't have tried that myself, and that is so simple and takes no time at all (detecing sarcasm yet?)
    I do a lot of work for large corporations that are watching the IBM=>Lenovo takeover very closely to see if they are going to drop Thinkpads altogether and go with another laptop vendor. This type of weak support does not bode well. The person I was on the phone with was rude, hard to understand, and even told me there was no place to escalate the call to.
    There is no replacement for customer support. It is sad to see no Lenovo involvement in this forum, and don't make the mistake of thinking this is an isolated problem at this time. It is growing.
    Though Thinkpads are great Laptops, Toshiba used to have the market, but their support or should I say lack of it led to their downfall and position of leadership loss.
    It will be no different if Lenovo continues to act like a machine churner.

  • How to securely workaround problem w/ ThinkVantage Client Security PW MGR & Windows PW Chg

    For those of you who have an authentication problem with ThinkVantage Password Manager after changing your Windows password, I would recommend uninstalling the Client Security - Password Manager application (if you just need the Password Manager and not the entire security suite) and install the Lenovo Password Manager.
    It would help to have an exported list of your passwords so you can re-import them into the new Lenovo Password Manager.  If you don't have an exported list and are locked out of ThinkVantage Password Manager, click on the box "I forgot my password" and answer your three security questions (if you enabled that feature during setup), then you can open the Password Manager and export your list.
    (Soapbox On:  it would have been nice if someone had recommended this as an option instead of shutting down discussion by saying we don't talk about subverting passwords.  I understand that is taboo, however other options should have been offered which are "kosher" as the above.  Soapbox Off.)
    Gary Grathen

    Been away working, now back...
    It was an HP8500 Printer that started all of this.  I find it difficult to believe that a (simple?) printer install could do so much collateral damage...
    BACK TO MY ORIGINAL QUESTION - How do I reset CSS?  Per furnished Lenovo documentation, (found on the hard drive) CSS was never installed on Windows 7 machines (for some Lenovo reason).  I can export PWs to external drive but still have no idea how to launch the CSS files (of which several executable files came pre-loaded on my machine).
    As far as being locked out of files, Finale composition software now says (upon trying to open files) "You don't have permission to open this file. Contact the file owner or administrator to obtain permission.."
    Worst case, I can re-build my Finale composiitons, but I'm still annoyed with the Lenovo log-in screen constantly asking me to enter a password that I don't know!
    I am very dissapointed with purchased LENOVO WARRANTY SUPPORT - the people I've talked to have no idea about what I'm trying to explain to them.

  • Web Center app with ADF Security - login problem

    I have a custome Oracle Web Center app.
    I have a page.html with an embedded login form posting to j_security_check. I've configured the ADF security policies to redirect to a JSPX on successful login.
    When I try the correct username/password, I get redirected not to the page I defined in ADF, but to the root page http://127.0.0.1:7101/MyApp-ViewController-context-root/
    and i get
    Error 403--Forbidden
    I've checked the weblogic.xml as per http://andrejusb.blogspot.com/2009/12/solving-error-403-forbidden-in-adf.html, all the required entries are there.
    This works fine if i use a Login link with
    destination="#{'/adfAuthentication?login=true&end_url=/faces/postLogin.jspx'} "
    which redirects to the default login.html and then to the right page. I've copied the form from the default login.html into my master HTML page.
    Hope my question is clear. Any suggestions why it is going to the wrong URL after login.
    Is there anything specific I should see in the jazn-data.xml or web.xml regarding the post-login URL since i cant see that in either.
    P.S. Have been advised to try here when I originally asked this in the WebCenter forum. Web Center app ADF Security - login problem
    Edited by: new_to_webcenter on 18-Jan-2011 05:25

    Thanks for your response Frank.
    The web.xml has
    <security-constraint>
    <web-resource-collection>
    <web-resource-name>adfAuthentication</web-resource-name>
    <url-pattern>/adfAuthentication</url-pattern>
    </web-resource-collection>
    <auth-constraint>
    <role-name>valid-users</role-name>
    </auth-constraint>
    </security-constraint>
    <login-config>
    <auth-method>FORM</auth-method>
    <form-login-config>
    <form-login-page>/login.html</form-login-page>
    <form-error-page>/error.html</form-error-page>
    </form-login-config>
    </login-config>
    When configuring ADF Security via JDev , I chose "Redirect upon successful authentication" to the Welcome Page
    "/faces/postLogin.jspx"
    this then adds into web.xml
    <servlet>
    <servlet-name>adfAuthentication</servlet-name>
    <servlet-class>oracle.adf.share.security.authentication.AuthenticationServlet</servlet-class>
    <init-param>
    <param-name>success_url</param-name>
    <param-value>/faces/postLogin.jspx</param-value>
    </init-param>
    <load-on-startup>1</load-on-startup>
    </servlet>
    So the sequence which works is:
    Login via the '/adfAuthentication?login=true&end_url=/faces/postLogin.jspx' and this redirects to login.html (OOTB form which posts to j_security_check) and then to the postLogin.jspx
    I'm trying to do away with a Login link, and trying the simple login form embedded in my page alongwith other content.
    So should the form be posting to j_security_check directly or to the adfAuthentication ?

  • WRT110 WIFI password problem

    Hi Everyone,
    I've got a very strange problem.  First, I indicated WPA under Wireless Security section and typed in my passphrase.  However when connecting to my wireless network name my passphrase never worked.  Second, I completely disabled security and tried to simply connect without any passphrase, but I was still being asked for a passphrase nonetheless.  I checked and double-checked and saved settings making sure security was disabled, but I was still being asked for a passphrase when choosing my wireless network!
    I could probably restore my WRT110 to factory settings, however I don't want to loose other configurations like certain open ports and IP addresses I opened up for firewall.
    Is there a way for me to resolve my WiFI password problem without restoring to factory default?  I just need to figure out how to make the WiFi passpharse work.  Here's what I have there:
    Security Mode: WPA Personal
    Encryption: TKIP
    Passphrase: 0sunspot0
    Key Renewal: 3600 seconds
    However, when I pick my wireless network and try to connect to it by typing in 0sunspot0, I get authentication failure!
    Am I doing something wrong?
    Thanks,
    Victor.
    Solved!
    Go to Solution.

    I have misplaced all relevant info. for my router.  I am trying to connect to a mini ipad.  What do I need?
    Is the router up and running and you would only want to add a device wirelessly? If so, you may access the setup page as sabretooth has said. To check the wireless settings, you may check this link, http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=476326f36c294e579ba6691a8db5411e_3698.xml&pid=80&r...

  • Form function, with security password on ipad

    Hi.
    I've been trying to create an acrobat form with form filling function - for people to type in to during an event on their ipads. BUT we want it to have a secure password. The idea is that the people attending the events download the document prior to the event, but can't open it until they are given a password at the event. It means we can save the surprise.
    The problem is, I can't seem to save a PDF document, with a fillable form function that you can save, AND give it a password. Once i add the password function, this seems to stop the form being fillable, on the ipad. I've tried loads of different ways to write it, and different versions of acroabt from 9, X, & XI. Tested it out on Acrobat Reader and on ipad. Am I going mad?
    If it's not possible, are there any genius' (plural of genius?!) out they with an idea how to work round this. I don't think ipads can open .zip files either (had thought to password protect one of those!).
    Oh orginal form created in Indesign 5.5, but also reopened and save in Indesign CC.
    Thank you

    It doesn't work with Adobe Reader, which should be considered a bug, but it does work with Readdle's PDF Expert, which is not free.

  • I can't get email even if I created the security password!,the way giving by Apple

    I can't get email even if I created the security password!,the way giving by Apple

    Never mind, I was very disappointed and I didn't  what I wrote,but I resolved my problem.

  • CUCM security password recover on a UCS c220

    Hello i'm trying to recover my security password on my cucm v10
    but there a step saying that i have to insert a CD ,
    i have a C220 where the hell i will insert this CD so i can recover it???? its confusing there is no disk drive on C220!!!!
    Thanks & Best Regrads,

    Yes you will need to reboot the CUCM cluster(if you have more than one servers) after changing the security password.
    Version 10 specific ref:
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/cucos/10_0_1/CUCM_BK_C2F2626C_00_cucm-os-admin-guide-100/CUCM_BK_C2F2626C_00_cucm-os-admin-guide-100_chapter_010.html#CUCM_TK_R280FDB4_00
    n
     You must reset each node in a cluster after you change its security password. Failure to reboot the nodes causes system service problems and problems with the Cisco Unified Communications Manager Administration windows on the subscriber nodes.
    -Terry

  • Unable to connect to 5ghz network band with security/password

    Hi, I've recently set up a 5ghz network band on my router. The problem is I can't connect to it while it has password enabled. However, I am able to connect while it has no security/password. I would like to connect to the router using some kind of security or password
           I am using a Netgear Router WNDR3400v2.

    You need to contact Netgear for support, it's their router they would probably know how to support it best.

  • Outlook 2010 cannot use Secure Password Authentication

    I am the administrator of the server running Microsoft Windows 2003 Server POP3 service since 2008. It hosts my email account. Nobody but me manages the settings of the server and the client side. Until the moment I decided to install Microsoft Outlook
    2010 as a client there was Secure Password Authentication working between Outlook 2003 and Windows 2003 Server. After installing of Outlook 2010, when I try to sync, the SPA authentication doesn't work. Nothing is changed on the server side.
    Enabling the SPA authentication on the both sides results a communicaton problem between Microsoft Windows 2003 Server POP3 service and Microsoft Outlook 2010 client. When I disable SPA on both sides the connection works but password is sent
    as plain text. Actually I started a discussion on
    http://answers.microsoft.com/en-us/office/forum/office_2010-outlook/outlook-2010-cannot-use-secure-password/66dafd66-1b00-43b5-96fb-b8a26254fc77 but I didn't receive an answer with a solution.

    Snefels,
    This is actually a known issue that Outlook 2010 doesn't work well with Windows Server 2003 POP services.
    Here is the blog post for the issue:
    http://blogs.msdn.com/b/jjameson/archive/2010/04/26/outlook-2010-does-not-work-with-windows-server-2003-pop3-service.aspx
    If you read the comments below, you'll found that some readers' shared some workaround/solutions, which reportedly works for others. So you might want to have a look.
    Disable SPA on the Windows 2003 POP3 server and do the same in Outlook 2010 POP setup.. using the full email address, "[email protected]" instead of just doug (if using the Secure Password Authentication).
    Aravindhan Battepati

  • SFTP password problem

    Hi Everyone,
    I've just begun setting up Server with port forwarding through my Airport Time capsule.  Everything works when I SFTP as myself.  from terminal, either SFTPing to [email protected] and entering my apssword lets me in... as well as simply SFTPing to 123.456.789.000 and entering my password.
    problem is, I created another account.  I created one account through "users" in system settings, and I tried to create another account within Server.  both accounts I gave administrator priveleges to, just for good measure.
    both accounts come back saying incorrect password.  my spider sense is telling me that it might have something to do with the way MY username is configured -- in my previous experience, I shouldn't be able to simply ftp to the raw IP without a user@ and have it ask me for a password.
    Thanks,
    Aemilia

    So if I understand this correctly, you now have two accounts with the same short name?  You'll want to resolve that duplication; that's not something that works well, and all sorts of stuff can get tangled.
    If you don't have duplicated shortnames here, then there's something else going on.  Start by confirming the remote account has ssh access and a valid and accessible login home directory; that's all necessary for ssh (and sftp, which is based on ssh) to work.
    Also have a look at the system logs for any related errors.
    Also consider setting up certificate-based logins for ssh (and sftp), as those are more secure than passwords, and particularly given the prevalence of brute-force ssh attacks on the network.

  • HT201240 I can't use my macbook at all. I forgot my security password.

    I have a problem to remember my macbook security password. Im stuck in the startup screen so i cant use my macbook at all right now. how do i reset my password without login?

    Forgot Your Account Password
    For Lion/Mountain Lion
        Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
         When the menubar appears select Terminal from the Utilities menu.
         Enter resetpassword at the prompt and press RETURN. Follow
         instructions in the dialog window that will appear.
         Or see Reset a Mac OS X 10.7 Lion Password and
         OS X Lion- Apple ID can be used to reset your user account password.
    For Snow Leopard and earlier with installer DVD
         Mac OS X 10.6- If you forget your administrator password
    For Snow Leopard and earlier without installer DVD
        How to reset your Mac OS X password without an installer disc | MacYourself

Maybe you are looking for