Security Policies and System Time

I'm trying to remove the right for all users\power users to change the
system time. I've hiden the timedate.cpl but they could still change the
date and time from the system try. So I removed the right for
users\powerusers in Computer configuration\windows settings\security
settings\local policies\user rights assignment\change the system time in our
default users policy and enabled the security settings for that policy. When
I look at the local policy after I reboot with gpedit the rights to change
the system have been removed, however they still can change the data and
time. If I remove the rigth manually it works until I reboot. I tried the
workaround in TID10096722, but that did not help. Am I missing something? I
am running ZfD 4.0.1 IR5, Windows 2000 SP4, NWClient 4.91 SP1.
Thanks Jason

Jhalbgew,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Similar Messages

How to create a type of 'alarm event' based on acquired sensor data and system time?

Hello all,
I'm fairly new to LabVIEW and have successfully created a VI that reads voltage data from sensors. Each sensor outputs 2 voltage values and I treat these values as 2 different DBL values. I'd like to be able to record each voltage value as a base and then compare the subsequent data readings with that base. Once the base is determined, I'd like a sort of 'variable' set as "TIME" to be recorded at the moment the base voltage is recorded.
The alarm should occur (or anything Boolean set to TRUE I guess) once the continuously read voltage remains within certain limits for about 2 hours. I know I can compare the system time w/ the "TIME" that the voltage base value was recorded. If the voltage readings escape those limits, I'd like the voltage base value reset and the TIME set to the corresponding system time again.
I apologize in advance if this I haven't' described my problem well, but if anyone could help me figure out the best way to create this code, I would appreciate it much!
Thanks!
Solved!
Go to Solution.

ill try to illustrate a couple scenarios:
keep in mind that i dont necessarily want the voltages in these specific ranges, but just a range of +/- 20 mV ... in an above post i refer to a "base" voltage reading, in this case that would be 200 mV for V1 and 400 mV for V2, just because the voltage has shifted to those values for an extended amount of time each (> 2 seconds)
Scenario 1
1:00 pm
Sensor readings
Voltage 1: 200 mV
Voltage 2: 400 mV
between 1:00 and 3:00 pm:
Voltage 1 does not deviate from 180-220 mV range
Voltage 2 does not deviate from 380-420 mV range
at 3:00pm I want an alert/alarm/Boolean to change to 'true'
Scenario 2
1:00 pm
Sensor readings
Voltage 1: 200 mV
Voltage 2: 400 mV
at 1:45 pm:
Voltage 1: 2 mV
Voltage 2: 600 mV
Since the voltage has shifted out of the range, i want the new base voltage to equal whatever it changed to out of the range, and also the time spent within the new range (2 +/- 20 mV and 600 +/- 20 mV, respectively for V1 and V2) would be reset, so a new 2-hour counter would begin

Client Security Solution And System Key Recovery

Hey,
I have an IBM ThinkPad T40 2373-82M Laptop. Everytime Windows starts up Client Security Solution displays a box which is prompting me to enter a password of some sort for authentication. It indicates at the top of the window that the reason for authentication is 'System Key Recovery'. If I click the 'OK' button it brings up another window indicating that authentication has failed and that the security key could not be recovered. I do not recall ever entering a password in the Client Security Soultion programme or anywhere else on my laptop. I am not the first owner of this laptop and I am wondering if the previous owner may still have his/her password in the system? Is there any methid for which I could reset/restore these key's?
Any help is appreciated.
Cheers
Ash

Thanks for the reply.
I must say I have read various issues on the web regarding this particular software buddled with Lenovo T series and although I will be uninstalling it I do not believe there is any support on this whatsoever. Too bad cause I did want to use it ...

Local time and system time issue

我们的本地时间与SAP SERVER的系统时间相差12小时，当我们做入库或出库时，日期能default到本地日期，但时间却用了SAP系统时间，我们想要时间也default到本地时间。怎么样解决这个问题？
thanks in advance.

请把这个贴子转到SAP ERP 论坛，谢谢！

Document Restrictions of Security Policies

Hello,
I've been hunting around but can't find it. Is there a concise reference for how to use Adobe Acrobat8 Security features with the Adobe Document Center? Is it so new that there's no book (Quick Start, etc.) on it?
I send PDFs to people. But I only want them to be able to print the PDF, not copy any of its content. I also want the PDF to deny access after a 3 month period. I was going to use Pinion Software's AutoShred product, but then I stumbled upon Adobe8 and the Document Center, which seemed like a perfect fit. So I immediately upgraded to Adobe8 and signed up for the trial at the Document Center.
I have created security policies and everything seems to work as its supposed to. However, when I look at any security policy, there is nothing allowing me to make the kind of detailed modifications permitted in Acrobat8 - Secure / Show Security Properties / SecurityTab / and the list for Document Restrictions Summary.
For some reason, when I set up a security policy - most restrictive to only permit printing and eliminate file access after 3 months - the "page extraction: allowed" phrase shows up when I examine Show Security Properties / Security Tab / Document Restrictions Summary, even though for everything else it is "Not allowed" which is what I want.
I thought maybe its a bug, because when I close the file and then reopen it, the page extraction is grayed out. But I don't know if people I send the file to will be able to extract the pages, thus getting around my objective of not allowing them to copy/paste any of my proprietary content onto some other file format.
Anybody else have this same problem. Is there a way for me to prevent page extraction and have it show up in the Document Restrictions Summary as "Page Extraction: Not Allowed"?
Thanks,
Robert

Hi Holly,
Question - is that all you want to do? Or do the documents have value to you such that you want to maintain control over how long they are used, by whom, and for how long?
1. If the former, you can use password protection to protect the documents, and format them so that they cannot be altered.
From within Adobe Acrobat 8 with the document visible.
Select Secure / Password Encrypt / Permissions
Click on Restrict Editing and Printing
Key in a protection password (I use the same for all documents)
Select Printing permissions "High Resolution" from drop down menu
Select Changes Allowed "None" from Drop Down Menu
Make sure "Enable copying of text, images.... box is unchecked
Don't worry about creating Security Envelopes or anything else. Just click cancel if those windows pop up.
Your security changes will not take effect until you save the document. Once saved, you can go to Secure / Show Security Properties / Show Details to confirm that all settings are as you want.
2. If you want to do the latter, you can sign up for Adobe Live Cycle Policy Server protection of the document. Adobe just came out with a new service. Right now its free. Later to be subscription based.
https://dc.adobe.com/adc/login.do?nextURL=https%3A%2F%2Fdc.adobe.com%2Fadc%2Fadc.do
I use this, since I want to maintain control over the documents. I let people print only. No other changes, no copying, no emailing. And the document "self destructs" on the date I set for its expiration.
Regards,
Robert

Getting accurate System time to milliseconds

I have written a program which needs to do following two things
1. make current thread sleep by some value in range 1 to 100 milliseconds
2. Get current system, acurate to maximum accurate value in miliseconds
as Java on Windows does not gurantee that Thread will sleep for the specified milliseconds and system time is also approximate, I need a solution that provides the guranteed accuracy for above two cases.
Please help!!!
Thanks in advance

I have created a udp client/server. I am able to regulate the rate of packets (approx) on server, but the client time is shifting(slowing down).
The basic function of client is to put set a variable client recieve time to the time on client and send packet back to server (to calculate delay on n/w).
The server is sending data at correct timing (approximate), but the recieve time at client is shifting down slowly.
I reduced the load on client by just discarding currrent packet and goto recieve next, but the delay is still there.
The data captured is this (SS is Server Send time, CR is Client Recieve time)
SS: 1108653459464 CR: 1108653447161
SS: 1108653460464 CR: 1108653448161
SS: 1108653461464 CR: 1108653449161
SS: 1108653462464 CR: 1108653450161
SS: 1108653463464 CR: 1108653451161
SS: 1108653464464 CR: 1108653452161
SS: 1108653465464 CR: 1108653453160
SS: 1108653466464 CR: 1108653454160
SS: 1108653467464 CR: 1108653455160
SS: 1108653468464 CR: 1108653456160
SS: 1108653469464 CR: 1108653457160
SS: 1108653470464 CR: 1108653458160
SS: 1108653471463 CR: 1108653459160
SS: 1108653472479 CR: 1108653460145
SS: 1108653473463 CR: 1108653461129
// server time reduced by just 1 millisecond but client got mad
SS: 1108653474463 CR: 1108653462129
SS: 1108653475463 CR: 1108653463129
SS: 1108653476463 CR: 1108653464129
SS: 1108653477463 CR: 1108653465129
SS: 1108653478463 CR: 1108653466145
SS: 1108653479463 CR: 1108653467145
SS: 1108653480479 CR: 1108653468145
SS: 1108653481463 CR: 1108653469129
SS: 1108653482463 CR: 1108653470129
SS: 1108653483463 CR: 1108653471129
SS: 1108653484463 CR: 1108653472129
SS: 1108653485463 CR: 1108653473129
SS: 1108653486463 CR: 1108653474129
SS: 1108653487463 CR: 1108653475129
SS: 1108653488479 CR: 1108653476129
SS: 1108653489463 CR: 1108653477113
SS: 1108653490463 CR: 1108653478129
SS: 1108653491463 CR: 1108653479129
SS: 1108653492463 CR: 1108653480129

System time for Java Stack and ABAP Stack of PI

HI,
     We have a scenario in which we have a synchronous flow of data. In the forward flow we have used field UZEIT in an RFC Lookup to register the inbound time and in the reverse flow we have used current time function of SAP PI mapping. PI time is the local time of the server, However UZEIT is 4 hours ahead compared to PI time.
Both the Java and the Abap stack are installed on the same server.
Kindly let us know the reason for the difference in time on both the stacks.
Regards,
            Milan Thaker

Hi,
   Yes I am refering to the System->Status time in ABAP Stack. Could you please tell me where can I check the System time of JAVA stack. I got one XML file in UME which refers to some timestamp in com.sap.security.core.usermanagement but I failed to locate this field. Please let me know where can I find the Java stack time and how can that be synchronized with ABAP.
         Also, is there any time zone settting in JAVA for UTC , the way we have in ABAP
Regards,
              Milan Thaker

Every time I try to purchase a song from itunes, it says I have to put in security questions and answer them, which it's never done before. Then after I do the questions, it says that an error occurred and my changes couldn't be saved. HELP!

Every time I try to purchase a song from itunes, it says I have to put in security questions and answer them, which it's never done before. Then after I do the questions, it says that an error occurred and my changes couldn't be saved. It has been doing this for weeks, and I can't purchase anything! HELP!

Hi mterry1723, one solution that might be worth trying is this:
- Close iTunes, if it's open
- Open Safari and got to 'Preferences'
- Select 'Security' on the top
- Untick all the security options in the menu
- Click the 'Show Cookies' button and look for all the 'apple' entries in the left-hand column.
- Highlight them (select them collectively) and press 'Remove'
- Now open iTunes and buy the song as usual.
- You may be asked to do the same security process as before, so do as asked.
- Hopefully, the security check will now have accepted your answers and start downloading the song as normal.
Remember to re-tick all the required security options you had just un-ticked in Safari preferences. You don't need to bother about opening the cookies again.
I hope this has worked for you and my profoundest apologies if it has not. Worth a go, though!
I did see this thread: https://discussions.apple.com/message/18259935#18259935 which may be of more help, mainly the last entry by 'c2boyd'
Message was edited by: Bongomal

How do i plot with the operating system time in one plot and show lines between cursors in another using the same XY graph?

I am having some trouble graphing two plots at once. One plot is to show the current temperature inside a chamber as a function of time. I am trying to pick the current time and temperature each second and plot it with each point being connected by a line. I am able to show a moving, blinking dot each second but I can't figure out how to develop an actual line with these dots. To make matters worse, the blinking dot is back in the year 1903. I understand that it uses seconds elapsed since 1903, and am trying to find out how to graph the current temperature with the system time.
The second plot is just 5 moveable cursors that are to be connected by a line. I am able to move the cursors and retrieve the position information, but I can't make a line between them.
I have attached my main .vi, though you may have to pick the graphing part off to have it work for you.
Attachments:
Main Module Chamber Testing I_O every 30 sec.vi ‏288 KB

You're not creating the XY graph data correctly. I've attached an example with a couple of simple XY Graphs. One is using a couple of shift registers to hold the spearate x and y arrays. I think this is what you were trying to do. The other one uses a VI from the shipping examples called XY Chart. It makes an XY Grpah act like a chart. I've also shown the correct way to display current time.Message Edited by Dennis Knutson on 05-12-2005 03:51 PM
Attachments:
XY Graph.vi ‏41 KB

I forgot My iCloud password, and i can not reset it as the system is not accepting the answer to the security questions and also the mail to my apple ID mail box is blocked, how can i reset my password for my apple ID.

I forgot My iCloud password, and i can not reset it as the system is not accepting the answer to the security questions and also the mail to my apple ID mail box is blocked, how can i reset my password for my apple ID.

Hello nmssns,
Thank you for contacting Apple Support Communities.
You can start with this article to reset your iCloud password. Depending on your exact circumstances, blocked email, forgot security questions, etc., there are links provided to guide you through those issues.
About Apple ID security questions
http://support.apple.com/kb/HT5665
Regards,
Jeff D.

How do I access my iphoto library on time machine backup external drive using Lion, originally saved from old computer and system

how do I access my iphoto library on time machine backup external drive using Lion, originally saved off old computer and system. It's not letting me open the folder???

Once again here's how to restore an iPhoto Library from Time Machine:

How to get system time and date with PHP

Dear Mr.Craig,
Thanx a lot. We are running SRM 5.0 (RAMP - Implementation).
My initial requirement is to write a server-side script to display server date and time. Could you give more inside on how to achieve it?
Regards,
Deva.

Perhaps that will help.
[code]
<html>
<h1>Access System time and date</h1>
<?
     // saprfc-class-library
     require_once("saprfc.php");
     $sap = new saprfc(array(
   "logindata"=>array(
   "ASHOST"=>"localhost"          // application server
   ,"SYSNR"=>"00"                    // system number
      ,"CLIENT"=>"000"               // client
      ,"USER"=>"bcuser"               // user
      ,"PASSWD"=>"minisap"          // password
     ,"show_errors"=>false               // let class printout errors
     ,"debug"=>false)) ;                     // detailed debugging information
     $result=$sap->callFunction("MSS_GET_SY_DATE_TIME",
        array(     array("EXPORT","SAPTIME",array()),
           array("EXPORT","SAPDATE",array())));
     if ($sap->getStatus() == SAPRFC_OK) {
    echo "Time: ".$result["SAPTIME"];
    echo "<br>Date: ".$result["SAPDATE"];
    echo "<br>or<br>";
    echo "Server is showing: "
         .substr($result["SAPDATE"], 0, 4)
         ."-".substr($result["SAPDATE"], 4, 2)
         ."-".substr($result["SAPDATE"], 6, 2)
         ." and "
         .substr($result["SAPTIME"], 0, 2)
         .":".substr($result["SAPTIME"], 2, 2)
         .":".substr($result["SAPTIME"], 4, 2);
     } else {
          $sap->printStatus();
     $sap->logoff();
?>
[/code]

Installing a new hard drive and using Time Machine to Restore system

I just upgraded a Macbook (2006) hard drive and had problems importing the Time Machine backup. The problem was that the initial install discs were for Tiger, which did not support Time Machine. After numerous attempts at a work-around I solved this problem the following way:
I connected the 2006 Macbook (with new hard drive) to a newer Macbook (with Firewire port) - one with install discs for Leopard (which supports Time Machine).
I launched the newer Macbook with the install disc (#1)
I connected the two Macbook via firewire cable.
I launched the 2006 (new hard drive) Macbook in the Target Disc mode.
I connected the USB external hard drive containing the Tme Machine data to a USB port in the newer Macbook.
Next I went to the Utilities Menu on the Macbook (operating from the Install Disc) and selected Time Machine. I followed the prompts to match the source and destination. The process worked fine.
The above assumes that a new hard drive is properly formatted using Disc Utility per Apple's guidance prior to the Time Machine restoration described above.
Cheers.
Bill

Bill,
No, the glass is half full!! In this case, we (collectively) have three things to brighten our day:
1) That I was mistaken, and that your usage is completely legitimate. I definitely prefer this to what was inherent in my erroneous assumption, and I do not mind being wrong (not in the slightest).
2) That we can be clever enough to overcome obstacles, then go out of our way to share our newfound knowledge with others. More specifically, that you have done so.
3) That we are willing to police ourselves, if and when one of us might go astray. Even if I was wrong in this case, isn't it nice to know I am willing scold someone for being less than honorable?
Perhaps my greatest mistake was the assumption that, if you had the proper disks at one time, you would still have them, or would have said so in your initial post. My apologies. Technically speaking, the media for a given OS should always be somewhere in your possession when running that OS. In practice, however, I strongly believe that some "wiggle room" exists, guided by common sense. In this case, I believe that the fact that you purchased said media gives you a pass, regardless of whether or not you know off the top of your head where it is.
There. Are you still saddened?
Scott

When I try to watch any video clip I get this: The version of "Adobe Flash Player" on your system does not include the latest security updates and has been blocked. To continue using "Adobe Flash Player", download an updated version from Adobe's we

When I try to watch any video clip I get this:
The version of “Adobe Flash Player” on your system does not include the latest security updates and has been blocked. To continue using “Adobe Flash Player”, download an updated version from Adobe’s website.
I tried clicking on the Adobe Flash Player. It said it accepted it but it did not make a difference.
Can anyone help?
Thank you!

This did not work
On Mon, Oct 27, 2014 at 8:59 PM, Apple Support Communities Updates <

The version of "Adobe Flash Player" on your system does not include the latest security updates and has been blocked. To continue using "Adobe Flash Player", download an updated version from Adobe's website.

The version of “Adobe Flash Player” on your system does not include the latest security updates and has been blocked. To continue using “Adobe Flash Player”, download an updated version from Adobe’s website.

You haven't actually asked a question, but as stated you should only download Flash Player directy from Adobe.
Nor have you said what version of OS X and Safari you are running.
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*. The latest version,10.3 or later, is for Intel Macs only, as Adobe no longer support the PPC platform. Version 11.0.1.152 is for Lion.
* Unhelpfully, if you want the last version for PPC Macs, you need to go here: http://kb2.adobe.com/cps/142/tn_14266.html and scroll down to 'Archived Versions/Older Archives'. Flash Player 10.1.102.64 is the one you download. More information here: http://kb2.adobe.com/cps/838/cpsid_83808.html
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.

Security Policies and System Time

Similar Messages

Maybe you are looking for