Security Restriction: allow a user to connect only from a specified IP addr

Hello all,
Is it possible to add the following security restricition?
Allow a specified user to connect to an Oracle Database only from a specified IP.
Thanks,
Andrea

It's not enough.
The configuration you suggested would limit all users connections from specififed IP addresses.
I need to limit the connection from a specified IP address only for a specified user.
Thanks,
Andrea

Similar Messages

What do I need to do to allow multiple users to connect to a Server?

Hi,
What do I need to do to allow more than two people to be able to connect to a server via RDP?
I am using Server 2012 and I need 4 clients to be able to RDP in.
The clients will only be accessing the Server from our internal network while they are onsite.
Do I have to setup Licensing and what other steps do I need to do?
Thanks

Hi,
Thank you for posting in Windows Server Forum.
Yeah, agree with words of Hari. Normally by default server will allow only 2 remote connection for administrator purpose. So you want 4 users to connect you need RDS CAL to access it. As already suggested you can purchase RDS CAL (Per User or Per Device) according
to your requirement.
After installing RD License server you need to activate it first and then you can install the purchased RDS CAL.
More information:
Enabling more Remote Desktop Connections in Windows 2012
http://social.technet.microsoft.com/Forums/windowsserver/en-US/cf93b596-413b-4390-a452-acb19a4b0b14/enabling-more-remote-desktop-connections-in-windows-2012?forum=winserverTS
Hope it helps!
Thanks.
Dharmesh Solanki

Disable Java Security Warning: Allow access to the following application from this web site?

Dear all,
When I open web intelligence with BI launchpad, this warning has been shown:
"The web site is requesting access and control of the Java application shown above. Allow access only if you trust the web site and know that the application is intended to run on this site.
Allow access to the following application from this web site?"
and it has just three button of "Yes", "No" and "Help".
I go to Java Control Panel and Security tab, then set security level on the "Medium" and add my site in the Exception Site List but this warning is shown each time I open web intelligence.
I have searched the internet very much but I haven't found any solutions for disabling of it. How can I disable this security warning?
Java version 7 update 67
windows XP
SAP BusinessObject BI Platform 4.1 Support Pack 4 Patch 2
best regards,

Hello,
We have the same issue with BI4.1 SP3 FP3.
Can anyone help us ?
Nawale.

Allowing other users to connect via SSH and using X apps.

My computer starts ssh as daemon and I can connect from other workstations, but I can't use ssh -X to use X apps.
I usually do not need it, but when I do it is pretty annoying.
I can connect to the university computer and use X apps, but I can't connect from uni to home... :S

I just did this on the machine you have sshed into you want to set the DISPLAY variable to 192.168.1.5:0
So if using bash it should be DISPLAY=192.168.1.5:0
The ip address being the address of your computer that you trying to run the X apps on.
I also believe you have to run xhost +
So to sum it up:
xhost +
DISPLAY=192.168.1.5:0
ssh -X ezzetabi@remotemachine

Allowing a user to select a Date

what is the best option which can be used to allow a user to select date from the user interface on a JFrame? Is there any tool available which can be used directly for this? (eg. like we can use javascript component in web-pages).

visit this one
http://in.geocities.com/onlyjava2003/index.html

TS only allows 1 user at a time to connect via RDP

Windows 2008 Standard (32 bit, not R2) Terminal Server has 10 licenses installed, licensing server is activated, but it only allows 1 remote user to connect at a time via RDP. When a user is already connected, subsequent users get a
message saying the server cannot be found.

Hi,
On the Server, please open Terminal Services Configuration (tsconfig.msc), and double-click RDP-Tcp. On the Network Adapter tab please make sure Unlimited connections is selected. Also in tsconfig, please make sure that the Licensing mode is
set to match the type of TS CALs you own, and that License server discovery mode is set to Use the specified license servers and you have your TS Licensing server's name listed.
Thanks.
-TP

RDS 2012 R2 - Allow Some Users Multiple Logon Sessions and Restrict Other Users to a Single Session

In Server 2012 R2 RDS, is there a way to allow some users to log on multiple times, but restrict other users to a single logon? On an OU or AD group basis?
I know there is a GPO setting under Computer Configuration for restricting users to a single logon, but this does not allow me to differentiate on a user basis (only on a per server basis).
Thanks,
James

Hi James,
From my perspective and knowledge, sorry to say but there is no such option\way to provide this permission at same time. If a user specifies a different program to start when the user connects to the RD Session Host server, a new session will be created on
the RD Session Host server for the user, even if the RD Session Host server is configured to restrict users to a single session. A user can specify a program to start on connection on the Programs tab under Options in Remote Desktop Connection.
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Restrict corporate user to connect to the BYOD ssid

Dear folks ,
Can anyone help me out to do the configuration of the ISE to restrict the corporate users to get connected to the BYOD ssid .
My devices are - laptops , windows phones , Iphones ..
My corporate laptops have certificate installed , i am using (peap + ep tls ) authentication to connect the Corporate laptop to corp ssid .
Plese guide me with some ideas ..
Regards
Agnus

Debaker,
You dont mention how you are expecting the non-BYOD devices to authenticate. If they are authenticating with certificates then you can do this. You can create an AuthZ rule that uses the BYOD SSID and authentication method as criteria. Then you create a rule that matches Certificate based authentication that permits access. Followed by a default deny.
Assuming the SSID was BYOD the mac address is presented to ACS/ISE as the "Called-Station-ID" using MAC address then SSID name separated by the colon. 00-11-22-AA-BB-CC:BYOD.
Your AuthZ rule can match Called-Station-ID ends with BYOD. The other option is to match based on Airespace-Wlan-Id. The second is not always preferred because if you have multiple WLCs all of the WLCs would need to be configured with the WLANs configured with the same ID numbers.
The second rule does not need to specify which SSID you want to allow the devices with the certificates on. This is because they are corporate devices they should be able to connect to the BYOD or corporate SSID, but if you wanted to only allow them to connect to the corporate SSID you would create a similar rule to the one above except using ":corpssid" and Network Access:AuthenticationMethod EQUALS x509_PKI.
You can also include Network Access:EapTunnel EQUALS PEAP to the BYOD rule if for some reason you wanted to disallow using certificates on the BYOD network.

Some data connections only work if security prompts are manually clicked

I am currently working on a PO form for our company and have run into a bit of a snag. I have one one database with two tables that populate a list of vendors and a list of PO #'s.
On the form is a Get PO button that connects to the databse, gets the first available PO # that is available, updates the record to in use and addes a unique ID # (generated off the curren time of when the button was clicked) and then does another connection to the same database to get the PO where the # = to that of the unique ID.
Here is my problem. With the data connection, you get those prompts about this file is attempting to access the following database. If you click yes to them (first when the doc opens - two more come up when clicking the Get PO button) the form works exactly as intended. No problems
Now if you check the box to remember this choice, and click yes to any of them, the PO # no longer gets displayed in the box. The database is being updated properly, but the subsequent connection with the select statement does not work.
I have added the files as trusted sources with the same results. The only way the database is update and the number is displayed is if all data connection prompts are clicked yes each and every time.
Any help would be appreciated. If it is needed I can update this post with the code I am using, but I am thinking this is more of a settings issue somewhere than it is with my code.
Thanks
Brian

It looks like I figured out the cause, and it only sort of had to do with the security prompts. Apparently, the second connection was occuring before update was completing in the access database. The only reason it would work when clicking the prompts was it allowed an extra second or so for the update to happen, then run the check to get the next number. I somewhat adjusted for this by putting a timeout in the code, which I dont really like, but even a delay of 500 milliseconds makes it work.

Help giving some users standard connections, other users secure

We've setup firewall forwarding and security, and everything works well over port 443.
Need to also give some users standard connections, however.
Have ready the manual front to back, but can't get this to work. Have done this:
-Followed instructions for setting up SGD security services and firewall forwarding. As stated, it works fine if everyone is over a secure connection
-Have ports 3144, 5307, 80, and 443 open
-want to have some users connect over standard connection.
Every time, I get to the login screen, but after entering credentials, it times out and says "No response from the Secure Global Desktop Client"
Can someone please point to where in the manual it explains how to make some people connect with secure connections and some connect with standard connections? We really need a 'how to' as I find I'm chasing down disparate parts of the manual to try to figure this out and am getting pretty lost.
Thank you

Hi,
You can do that, but it needs to open more ports, In the Array Manager Secure connections should be to 443 and standard connections should be to 3144.
So from that starting poing, the users connecting in secure mode will use only 443.
Users connecting in standard mode will use 443 for the first AIP connection before the login process, after the users loggs in, the AIP connection will be changed to port 3144.
Believe me, I see that working from version 3.xx, and I tested it too in 4.30.
So as the previous folk says you can not use only 443 for standard and secure connections.
I hope that helps,

How to restrict a User to access only 2-3 views in MM01/MM02 ???

Hi,
Can anyone tell me how can I restrict a User to access only 2-3 views in MM01/MM02 and also the User should not be allowed to change the View selection by clicking on the Select Views button ?.
Regards,
Lucky

Hi Prashant,
Can this only be done through changes in Authorization Objects ? Is not there any setting which can be done in SPRO for this ?
Hi Sheshagiri,
I could not exactly understand how the access to MM Views can be restricted to User through TCode OMT3B i.e. in SSeq. 01 and Screen 07 ? Subscreen 2154 is for Mat. Groups ? Please explain your answer in detail.
Regards,
Lucky

Only allow that users write only in uppercase in all fields of ICWEB.

It's possible only allow that users write only in uppercase???
Thanks in advance.
Best

Hi Javier,
I dont think that this is possible for all the attributes as most of them will be standard.
But for custom attributes the case can be controlled from the domain.
Check this thread where users experienced problems with the case of the text.
Change of CASE in ZCOMPONENT ZFields
Here too...user cannot be restricted, but after a server event system takes care of case conversion.
Regards,
Masood Imrani S.

I am trying to allow guests on windows to connect to shares on my Lion server but it keeps asking for a password for guest. I have allow guest users to access this share enabled but it still does not work.

I am trying to allow guests on windows to connect to shares on my Lion server but it keeps asking for a password for guest. I have allow guest users to access this share enabled but it still does not work.

Ditto. Guest accounts shouldn't have a password. No way to enter one in System Prefs...

How can I allow a user to control my Edge Animation using only the scrollbar?

I have seen a few examples of an Edge Animation being conrolled by the scrollbar, and I am wondering how I could achieve the same effect.
Example:
http://dominikruckli.ch/scrolltest/scrolltest.html
I have searched the corners of the internet and have found 2 or 3 different tutorials, but none of them have proven successful.
In basic terms, I am creating an animation that involves a character getting from Point A to Point B, from the beginning of my timeline to the end.
Rather than exporting my animation so that it plays automatically, by itself, I would like for a user to scroll vertically, and the playing of the animation moves in conjunction with the scroll bar.
As the user scrolls from top to bottom on the scrollbar, the character in my animation moves from Point A to Point B.
Also, if the user stops scrolling... the character will stop moving as well.
In addition, I would like the surrounding area, outside of my stage, to remain hidden. I do not want to allow the user the ability to scroll around and see off of my designated stage area. I only want the scroll bar to act as a playhead for the animation.
Any help will be greatly appreciated.
Thank you
Note:
If you have special CSS (or other form of Code), please provide specific instructions on how to insert this code, where it should be located, what part(s) of the code should be altered, and any additional instructions on how to apply any form of coding. (Screenshots would be amazing)

Never mind. I figured it out myself. I changed the myComp.play("scenefour"); to myComp.getStage().play("scenefour"); and it worked fine.

HT2688 Working on a single computer with multiple users, I have set things up to allow each user to view and listen to the others' music libraries under the "Shared Library" function. Can you then connect an iPod touch and copy music from a shared librar

Working on a single computer with multiple users, I have set things up to allow each user to view and listen to the others' music libraries under the "Shared Library" function. Can you then connect an iPod touch and copy music from a shared library?

Was your wife logged into the libray at the time you tried to log in? I have had a similar problem and it was because another user was logged into the library when I attempted to. I got the permission denied banner.

Security Restriction: allow a user to connect only from a specified IP addr

Similar Messages

Maybe you are looking for