Security settings blocking CCA Player?

Hi I am trying to take a course using a website that I've used before. I think it uses Cisco presentation software. Is there a setting I can change so I don't get this error message and the course can play??

Hmm, that looks like the Java dialogue boxes I've seen on our Windows 7 computers.
In System Preferences, do you have an icon for Java? It would most likely be at the bottom of the window.
If you do, click on it and look through the tabs - one of them should have a security settings slider that allows you to lower the setting so this will run.
If you need more guidance, this blog post has the steps
~Lyssa

Similar Messages

Security Settings on Authorware Player Install

In the awswax.inf file, located in the awswax.cab, file there
are various settings available. Does anyone know if we can define
security settings in this file so when the user installs the
Authorware player, the settings get put into the AWSHKWV.INI file?
I'm trying to figure out how I can make our internal company site
trusted automatically when they install the player from our web
server. Any suggestions?

Best bet is to use the Security KO and add trusted sites
there. Give your users instructions to hold down the Ctrl key when
first clicking the link that launches the web piece.
Additionally, you may want to instruct users to add your site
to Trusted sites (IE).

Graphical Modeler Security settings blocking error

Hi,
We are getting the error message 'Application Blocked by Security Settings' when we click the Graphical Modeler from Profile Set Creation view.
Request you to suggest on how to fix this issue.
Best regards,
Azaz.

Hi Azaz,
Try un-installing Java on your desktop and re-install once again.

Default Domain Policy security settings block inheritance

I know this has been answered in one way but just to clarify, in our case default domain policy contains password security policies, Network security: LAN Manager authentication level, and some
Public Key Policies/Trusted Root
Certification Authorities settings. All of these are on computer settings, user side is disabled and is not Enforced.
Question is that if further down AD there is a inheritance filter applied, would all of the settings form Default domain policies would pass through or just security settings?
I find that they have also linked the default domain policy at OUs where they have put inhetitance filter, probably thinking that they wanted to filter out every other policy but the default domain policy.
Thanks
NSW DECC

Hi,
>>Question is that if further down AD there is a inheritance filter applied, would all of the settings form Default domain policies would pass through or just security settings?
The default domain policy will be blocked by enabling block inheritance at OU level. As Ramu suggested, we can enforce the default domain policy to prevent it from being blocked.
In addition, regarding this question, the following thread can also be referred to for more information.
Can I block inheritance of "Default Domain Policy"?
http://social.technet.microsoft.com/Forums/en-US/ce5173b8-b803-4e50-b05b-c4a5677bf9ba/can-i-block-inheritance-of-default-domain-policy?forum=winserverGP
Best regards,
Frank Shen

How to change security settings in Flash Player if internet is unavailable?

I have a local html page that has an embedded .swf file,
which is also on my local computer. The .swf file is for local use
only when there is no Internet service available. The first time I
open the html page on an internet browser, IE, I got the Flash
Security prompt window, which asks me to change the security
settings. The setting change is done online under the url:
http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager04a.ht ml
If there is no internet connection, how then can one change
the security settings so that one can access the local swf? Any
help would be appreciated.
Eric

Do I really need to set security for my wireless connection. I searched for available WiFi in my area prior to installing my network and none were available. Does that matter?
The network never did function right from the start. My desktop is a Dell Inspiron 510n and is not wireless capable? So when I tried to add my HP mni 1000 it did not let me access the Internet.
So now I have an unsecured network. Am I vulnerable to attack?
Which leads me to my real question How do I change the security settings?
Oh yeah, my home computer crashed due to a program I downloaded, so I do not have access to it. i'm a mess....
Thanks,for any help
Phil

Security Settings blocking data export to FDF file in Reader

I created a form in Acrobat Pro that has fillable text fields, radio buttons, drop-downs etc. I created a button which executes a JavaScript method to export all field data to an FDF file. This works fine if the PDF is opened in Acrobat Pro, and the FDF opens fine in Reader. But when opening the file in Reader the JavaScript console tells me that the method is not allowed due to security settings for the document. When I check the security settings for the document in Pro, it shows everything as "allowed". The same document when opened in Reader shows several permissions "not allowed". I am guessing that these restrictions are preventing the button from working. How do I remove these restrictions?

There are no parameters for the method that define or allow overriding security. I may have to execute it through app.trustedFunction.
Te following message shows up in the console when I attempt to export from Reader.
NotAllowedError: Security settings prevent access to this property or method.
Doc.exportAsFDF:3:Field Button1:Mouse Up

Flash 8 Player security settings Help

Hi All. Im having some annoying problems with Flash player 8
(the standalone player not web one).
I am making a flash portfolio, and am using an XML file to
import data (such as images and text) into the portfolio at
runtime.
Everything works when run in the flash IDE when i run the swf
(see IDE.gif), but when i run it in local flash standalone player
(see Player.gif), the images are blocked out (un-masked) - this
doesnt happen when i view the swf on the web or when i make a
projector, which makes me think its something to do with flash 8
player security settings.
ive already changed the settings, adding the local path of
the file and the image directories, but still it wont work.
what other settings do i need to change??
IDE.gif :
www.mitchellpage.com.au/temp/IDE.gif
Player.gif:
www.mitchellpage.com.au/temp/Player.gif

AndiMorris wrote:
> I'm having some trouble with the global security
settings in Flash Player 8. I
> have deployed the player successfully using GPO, but now
have a piece of
> software (Nelson Thornes) that requires content from
c:\program files\nelson
> thornes to be allowed in order to run. Manually enabling
this using the
> settings manager works a treat, however it only changes
it for the current user
> and I can't find any way of setting it per station so
that I can package it up
> and deploy it. I can't expect all of my users to do this
themselves.
There is an MMS.cfg file that you can deploy that will allow
you to
control this site wide without individual user interaction
(overriding
settings manager).
Start learning here:
" IT Administration: Configuring Flash Player auto-update
notification"
http://www.adobe.com/go/16701594
Bentley Wolfe
Senior Support Engineer, Flash/Flash Player
Adobe

Flash Player 8 global security settings

I'm having some trouble with the global security settings in
Flash Player 8. I have deployed the player successfully using GPO,
but now have a piece of software (Nelson Thornes) that requires
content from c:\program files\nelson thornes to be allowed in order
to run. Manually enabling this using the settings manager works a
treat, however it only changes it for the current user and I can't
find any way of setting it per station so that I can package it up
and deploy it. I can't expect all of my users to do this
themselves.
Please tell me there's a way of doing this?!?!

AndiMorris wrote:
> I'm having some trouble with the global security
settings in Flash Player 8. I
> have deployed the player successfully using GPO, but now
have a piece of
> software (Nelson Thornes) that requires content from
c:\program files\nelson
> thornes to be allowed in order to run. Manually enabling
this using the
> settings manager works a treat, however it only changes
it for the current user
> and I can't find any way of setting it per station so
that I can package it up
> and deploy it. I can't expect all of my users to do this
themselves.
There is an MMS.cfg file that you can deploy that will allow
you to
control this site wide without individual user interaction
(overriding
settings manager).
Start learning here:
" IT Administration: Configuring Flash Player auto-update
notification"
http://www.adobe.com/go/16701594
Bentley Wolfe
Senior Support Engineer, Flash/Flash Player
Adobe

One or more ActiveX controls could not be displayed because either:1 your current security settings prohibit running ActiveX controls on this page, or 2. You have blocked a publisher of one of the controls.

hi All,
i have one of the requirement for an application, we do upload some release not in file server and that is used in application link to see the note. in this note i have converted the Excel into .HTM format(web page). this was working fine, but from last
two days all of a sudden we are recieving error as above.
one or more ActiveX controls could not be displayed because either:1 your current security settings prohibit running ActiveX controls on this page, or 2. You have blocked a publisher of one of the controls.
could anyone please help me on this.
Thanks and Regards,
krishnamurthy

Hi,
Actually Arnavsharma provided a operable method for you. But no luck, it's not invalid.
Here I also offer you an method you can try.Please delete the extra (parasite) zone from the Zones subkey :
Click Start , click Run , type regedit , and then click OK
Expand the following registry subkey
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Zones
Delete the extra (parasite) zone from the Zones subkey
Note: The parasite zone is a pseudo-graphic number listed before zone number 0. The pseudo-graphic number looks like a miniature upper case "L"
Close the registry editor
Thanks!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Update security settings for adobe flash player

I have windows 7, 64bit, adobe flash player 11.
Can't play You Tube videos...message say need to update flash player.
Went to adobe site....tried to download latest version 11.8, and message says I need to update security settings to allow.
I'm a beginner...where and how to update these settings.

Download the Adobe Flash Player installer directly by right clicking one of the following links.
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)
Save the installer - DO NOT run it yet.
Reboot your system.
BEFORE you open anything else, locate and run the installer you downloaded.

Java: Your security settings have blocked an untrusted application from running

I keep getting the error "Your security settings have blocked an untrusted application from running" when trying to access the Web Interface of an HP printer....I don't know the model of the printer since I cant get into it, but it does say HP. I am trying to access it using IE 11, but also tried it in chrome and it is saying "The Plugin is not supported".
I have updated Java, went into the Java control panel > Security tab > Added the printers IP address to the exception list. I still get this error. Can't turn the Java security lower than High anymore....there just isn't an option for it. I have had this happen on multiple printers before, and Google hasn't helped so far, figured I would ask you all while I continue my search.
Anyone else run into this?
This topic first appeared in the Spiceworks Community

I'm not sure anyone here knows more about the Java plugin than you do...
Were you starting the control panel from disk as administrator because it didn't work starting it through the Start menu (if you have Control Panel set to View by Category, the Java control panel is under "Programs").

Flash on mac os 10.3.9 flash player being prohibited by browser security settings how do i fix this

this is the message i get
"This content requires the Adobe Flash Player. It either has not been installed yet or is prohibited by your browser security settings. Either click here to get Flash or loosen your browser security restrictions."
how do i loosen the browser security restrictions?

this is the message i get
"This content requires the Adobe Flash Player. It either has not been installed yet or is prohibited by your browser security settings. Either click here to get Flash or loosen your browser security restrictions."
how do i loosen the browser security restrictions?

Updated the latest version of java now it blocks websites that use that application even though security settings on safari say to always allow. What can I do?

Updated the latest version of java. Now it blocks websites that use it Security settings on safari are set to allow use. What can I do to fix/

gamegate.com is one of them. My security settings are set to enable javascript and allow java.

Blocked applications by security settings- How can I unblock it?

I have a pop up message stating application blocked by security settings- How can I unblock it?

Thank you for your help. I checked the settings in Security & Privacy General Tab and I currenty have Allow Applications Downloaded from Anywhere. I also clikced on the Safari icon, Preferences and allowed Plug In for this webpage but the pop up message keeps on appearing when I enter the webpage again.

Java is blocked by Security Settings

I have the latest OS X 10.8.2 and the latest Java 7 version 10 but it does not work.
I get a screen saying "Application Blocked by Security Settings". I've gone through and double-checked all settings and they look fine.
I've deleted the Applet from the Internet Plug-Ins folder and did a reinstall - still with the same results. Oh by the way, Safari is 6.0.2.
Any suggestions?
Message was edited by: knarfrh60

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

Security settings blocking CCA Player?

Similar Messages

Maybe you are looking for