Security settings for Packages Data Source

Hello,
Can someone please help me or address me to some technical advise about the way to configure the security options of a folder designed as a Data Source for Packages (or OS Images) to work with SCCM 2012? I'm having a lot of troubles in distributing
content from network shares (access denied and the like).
I've set up the Security Options for Data Source folder so that they inlcude full control for:
any SCCM admin user
site server computer account
distribution point computer account
what else should I put in?
Thank you very much!
Davide

Hi,
Please check despool.log on the primary site. There might be some errors about the WIM OS image.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

WRT54GP2 security settings for HP Ipaq 111 handheld

I have a home wireless network, using a Linksys WRT54GP2 wireless router. I'm trying to secure the network, with has 3 wireless systems, my home PC, a notebook, and my Ipaq 111. I can get my home PC and the notebook to work when I setup the WRT54GP2 router using Authentication: WPA-Pre-Shared Key and Data Encryption: TKIP, but the Ipaq 111 will not even see the router with any security setting. When the security settings for the Linksys Wireless Router WRT54GP2 are disabled the Ipaq 111 sees the router and connects to the internet.
The HP Ipaq 111 handheld has the following security options: Authentication: Open, Shared, WPA, WPA-PSK, WPA2, WPA2-PSK. Data Encryption: Disabled, WEP, TKIP, AES.
Does anyone have any ideas of how to get the Ipaq 111 to work on the secured Linksys WRT54GP2 router?
Thanks for any help.
John

On your Router setup page, Click on the Wireless tab and below change the Wireless Channel to 11-2.462GHz and click on Save Settings, then click on the Sub tab Advanced Wireless Settings and below Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...
Now see if you can locate your Wireless Network and attempt to connect to it on your Ipaq.

WRT54GP2 security settings for a HP Ipaq 111 handheld

I have a home wireless network, using a Linksys WRT54GP2 wireless router. I'm trying to secure the network, with has 3 wireless systems, my home PC, a notebook, and my Ipaq 111. I can get my home PC and the notebook to work when I setup the WRT54GP2 router using Authentication: WPA-Pre-Shared Key and Data Encryption: TKIP, but the Ipaq 111 will not even see the router with any security setting. When the security settings for the Linksys Wireless Router WRT54GP2 are disabled the Ipaq 111 sees the router and connects to the internet.
The HP Ipaq 111 handheld has the following security options: Authentication: Open, Shared, WPA, WPA-PSK, WPA2, WPA2-PSK. Data Encryption: Disabled, WEP, TKIP, AES.
Does anyone have any ideas of how to get the Ipaq 111 to work on the secured Linksys WRT54GP2 router?
Thanks for any help.
John

What is the model no of the Wireless Adapter you are using on the HP laptop...?
Have you tried updating the driver for the adapter...?
Try to adjust the wireless settings on the router...Open the setup page and Under the Wireless tab,Change the Network Mode to mixed...Keep the Wireless Channel on 11-2.467GHz and click on save settings...Under the Advanced Wireless Settings, Change the Beacon Interval to 50,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...

Do package data sources update all connected connection managers automatically?

I converted a big project from SSIS2008 -> SSIS2014
During conversion i also erased all connection managers and recreated them based on the packages data sources.
Now i want to test my packages on another server , so i changed my 2 data sources only.
When i open the packages can see on the connectionstring the old server.
If i dont do anything else and press start, what will happen?
Will the package update itself automatically and get the connection string of the data source or not?
Elias

Hi Elias,
If file or database in the connection string for old server can be accessed from remote server and we have access to that file or database in the connection string, then we can execute the package very well. For example, there is an OLE DB Connection
Manager that connect to a database from old server. If we have access to that database in new server, then we can still connect to that database. Please notice that the connection string is still the original one, it couldn’t update itself automatically.
If we want it connect to another one, we should manually change the connection string. Unless we are using a localhost file or database and they also existing in the new server, they can update to new server automatically.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Power View in SharePoint Server - The data extension type for a data source is not valid

Hi All,
All of a sudden I am getting following error when trying to create Power View report using shared report data source (no error testing the connection):
"The current action cannot be completed. The data extension type for a data source
'http://dev/Shared Ducuments/Sales.rsds' is not valid for this operation"
I already have a data source (I had created it after creating my site collection a week ago) and when I use this source to create Power View report then there is no error but I am getting above error when I create another similar data source and use it to create
a Power View report.
Please help me to resolve the error.
Thanks

I am going nuts! I had selected 'Analysis Services' instead of 'Microsoft BI Semantic Model for Power View'

Discrepency while REPLICATING META DATA (for new DATA SOURCE) in BI side.

In R/3 I have created a simple TRANSACTIONAL data store based on an INFO QUERY.
I even checked the veracity of this data store using RSA3 to see whether it extracts data. Works perfectly.
I go to BW side. Click on the SAP module under which I have created the data source, right click, select 'REPLICATE' and click on it.
( I would love to post the screen shot here, but I think I may not be able to paste BMP files here).
I will write the contents of the POP-UP that appears,
Title:Data Source from Source System Unknown
Pop-up contents:
Data Source (OSOA) DS_01
does not exist in BI system
How do you want to create the object in BI?
1. as DataSource (RSDS)
2. as 3.x DataSource (ISFS)
3. this and following 3 as DataSource (RSDS)
4. this and following 3 as 3.x DataSource (ISFS).
Well, I normally select option three as per my instructions (without knowing the real reason).
But sometimes, either for the same data source or for another data sources that I created, the same pop up will appear like this
Title:Data Source from Source System Unknown
Pop-up contents:
Data Source (OSOA) DS_01
does not exist in BI system
How do you want to create the object in BI?
1. as DataSource (RSDS)
2. as 3.x DataSource (ISFS)
Just TWO options.
And, if I select option 1, the data source does not work properly on BI side, though it worked perfectly on R/3 under TRANSACTION RSA3 and showed me data.
For some unknown reasons, if I delete the erroneous datasource on BI side and sleep overnight and comeback in the morning and replicate, the POP-UP sometimes appears with FOUR options, (Notice the word 'SOMETIMES')
Can someone explain the secret behind this?
Thanks again in advance,
Gold

3. this and following 3 as DataSource (RSDS)
That means there are total 3 new (not yet in BI) DataSources available, u wanted to replicate as 7.0 datasource (RSRS) or 3.x datasource (ISFS).
(other 2 datasources activated from RSA5, or created by other users under that SAP module)
If there is 1 new DataSource, u will get just TWO options.
1. as DataSource (RSDS)
2. as 3.x DataSource (ISFS)
After replication with option 1, u should activate datasource in BI, then create infopackages, transformation, DTP etc.

What are the steps need to be taken care for MM data sources while extrac

what are the steps need to be taken care for MM data sources while extracting from R/3 tables
and please provide the Steps involved in R/3 side
thnaks
Racha

Hi,
For Inventory Management, you can have a look at the following link.
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328]

What are the settings for apn data and mms for iphone 4 on straight talk?

what are the settings for cellular data network APN DATA and MMS for Straighttalk sims on IPhone 4?I cant send or recieve pictures.My service keeps losin signal constantly saying no service then 1 bar,2 bars,3 bars...then back down to no service.It drops calls.Iv been trying to find out the answer to this problem for 2 weeks!I have no Profile selection in my settings either to do wat its showing online on one website.and have entered numerous diffrent APNs and none have worked!!!!PLEASE HELP!!!

They're asking a question about carrier settings for their iPhone. I think that has everything to do with Apple.
Maybe they did already ask Straight Talk. I've called Straight Talk before... they're not too helpful.
You know, this forum would be much friendlier if people in this forum would quit squabbling, & posting comedic replies, not too mention name calling (like I did), when people are just needing some help.
It's also frustrating that people stick up for the guy who doesn't help, but rather takes the time to post some smart alec reply. Granted, I shouldn't have name-called... some people just frustrate me when they act like that.
Admittedly, there ARE some grey areas when it comes to carrier questions... but let the moderators do their job when someone is asking innappropriate stuff. And if the mods aren't chiming in, then that's a good indication that what the thread is about IS in fact Apple related.

Java WebDynpro's and IE security settings for file download

We have a EP 7.0 SP13 environment on which we have deployed a number of own developed java webdynpro's. In some of these webdynpro's we provide the file download functionality. The portal and webdynpro's are used by both internal personnel and external customers.
On the other hand the default Internet security settings for Internet Explorer, disable "Automatic prompting for file downloads".
When a user, with these default security settings active, tries to use our webdynpro's file download functionality, the screen seems to refreshes but no file download starts. When (s)he retries, the session runs for some minutes and gives following error message:
"com.sap.tc.webdynpro.services.session.LockException: Thread SAPEngine_Application_Thread[impl:3]_20 failed to acquire exclusive lock on client session ClientSession".
This behavior is explained in SAPNote 1234847. Webdynpro provides a single-thread module, meaning a user session is blocked for the during of the request. And because the previous file download isn't yet completed the new try can't start.
Issue now, although the users IE settings allow file downloads and don't block pop up's, he can't download the file and even isn't made aware of the cause of the failure.
How can we avoid this issue, without having to communicate the
application requires specific browser settings?

Welcome to the Apple Support Communities
See > http://support.apple.com/kb/HT5290
You can install the program using different ways:
1. Right-click the application installer and choose Open.
2. Go to System Preferences > Security and Privacy and select Anywhere in Allow applications downloaded from

Query security settings for users

Hi again.
I'm looking for a way of querying security settings for a user.
ie I understand that company/division etc security is implemented through responsibilities.
In which case, is there a way to retrieve those exclusions per user?
(eg User 1 cant see company 50)
Thanks,
g.

Hi again.
I'm looking for a way of querying security settings for a user.
ie I understand that company/division etc security is implemented through responsibilities.
In which case, is there a way to retrieve those exclusions per user?
(eg User 1 cant see company 50)
Thanks,
g.

Settings for costing data in order types for plant maintenance

i want to know the purpose of settings for costing data in order types for plant maintenance. do we need to do it for sure i mean are those settings mandatory to analyze the costs on work order

Yes you need to maintain those settings, as the plant maintenance orders are also considered as cost objects and in order for you to post any cost, you need to have a cost object. Unless you maintain these settings, the cost you posted cannot be settled to a cost center.
Assign points as a way to say thanks.
Madhav Nanduri

Error in Installing the Business Content for 2LIS_06_INV data source

Hi Experts,
We are trying to install the Business content for 2lis_06_inv. When we replicate the datasource, we are not seeing it in 3.x version. It is only vailable in 7 version. There is no transformation available in Business content for this data source. Please let me know how we need to proceed with this installation. Should we install the 7.0 flow or 3.x flow? Please provide th details if you have implemented th same in your system. Thanks is advance.
Regards,
Kavitha Jagannath

Hi,
Follow bellow steps:
1. Goto RSA1.
2. Select the BI content.
3. Select the Grouping as' In Dataflow before and after'
Then,you can get the data flow which are haveing the DS/TR/Data targets.
4. Select the Install by setting the 'Install in background'.
Regards.

Data Not coming Properly for 0HR_PA_OS_1 Data Source?

Hi Experts,
I am trying to load data to 0PAOS_C01 using 0HR_PA_OS_1 data source. For field 0POS_OCCVAC key figure i am not getting any data from Data Source.
I checked in RSA3 for 0HR_PA_OS_1 data source and in that it is not populating data for filed OCC_VAC_PERC field. I checked with HR functional team and they mentioned its a BI issue.
Kindly tell me how can i populate values for the particular field. FYI i am getting correct data for other fields.
Please help me.
Thanks

The possible reasons
1.Your user id might not be having the proper authorization to pull the HR data.This you can confirm with your basis guy,if you are unable to find what are the authorization roles required for HR data, for the time being you can take SAP_ALL authorization in development box and try to pull.
OR
2.Try to pull from BW side,you may be able to see the data there because this uses the background user id used in RFC connection ( provided if your background user id having proper authorization ).

Marker update for Inventory data sources

Hi all,
why we use marker update in Cube manage for inventory data sources at the time of loading?
i heard that to avoid the keyfigures cumulation we do check that option ,is that correct/
please clear my doubt
thx

HI
(2LIS_03_BF Goods Movement From Inventory Management-------Unckeck the no marker update tab)
(2LIS_03_BX Stock Initialization for Inventory Management--
---select the no marker update check box)
2LIS_03_UM Revaluations -
Unckeck the no marker update tab)
in the infopackege of "collaps"
Cheers

Time series functions are not working in OBIEE for ESSBASE data source

Hi All,
I am facing a problem in OBIEE as I am getting error messages for measure columns with Time series functions(Ago,ToDate and PeriodRolling) in both RPD and Answers.
Error is "Target database does not support Ago operation".
But I am aware of OBIEE supports Time Series functions for Essbase data source.
using Hyperion 9.3.1 as data source and obiee 11.1.1.5.0 as reporting tool.
Appreciate your help.
Thanks,
Aravind

Hi,
is because the time series function are not supported for the framentation content, see the content of the oracle support:
The error occurs due to the fact the fragmented data sources are used on some Time series measures. Time series measures (i.e. AGO) are not supported on fragmented data sources.
Confirmation is documented in the following guide - Creating and Administering the Business Model and Mapping Layer in an Oracle BI Repository > Process of Creating and Administering Dimensions
Ago or ToDate functionality is not supported on fragmented logical table sources. For more information, refer to “About Time Series Conversion Functions” on page 197.
Regards,
Gianluca

Security settings for Packages Data Source

Similar Messages

Maybe you are looking for