Security Settings on Authorware Player Install

In the awswax.inf file, located in the awswax.cab, file there
are various settings available. Does anyone know if we can define
security settings in this file so when the user installs the
Authorware player, the settings get put into the AWSHKWV.INI file?
I'm trying to figure out how I can make our internal company site
trusted automatically when they install the player from our web
server. Any suggestions?

Best bet is to use the Security KO and add trusted sites
there. Give your users instructions to hold down the Ctrl key when
first clicking the link that launches the web piece.
Additionally, you may want to instruct users to add your site
to Trusted sites (IE).

Similar Messages

Computer keeps telling me my security settings will not allow install

I need help in installing Adobe Flash Player--
I am sure it is something simple, but I cannont figure it out--system keeps telling me my security
settings need to be changed to allow download--where and how do I do this--thanks a million

I tried uninstallin g and rebootingreinstalling and then changingpersonal settingsclosed out of internet and then reopened--still will not load HELP
Michael
From: chris.campbell <[email protected]>
To: Michael Richards <[email protected]>
Sent: Tuesday, August 16, 2011 12:05 PM
Subject: Computer keeps telling me my security settings will not allow install
Hello,
You didn't mention what type of computer you have so I'll guess Windows Please run through the steps on our troubleshooting page and post back if you're still running into problems.
http://kb2.adobe.com/cps/191/tn_19166.html
Thanks,
Chris

How to change security settings in Flash Player if internet is unavailable?

I have a local html page that has an embedded .swf file,
which is also on my local computer. The .swf file is for local use
only when there is no Internet service available. The first time I
open the html page on an internet browser, IE, I got the Flash
Security prompt window, which asks me to change the security
settings. The setting change is done online under the url:
http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager04a.ht ml
If there is no internet connection, how then can one change
the security settings so that one can access the local swf? Any
help would be appreciated.
Eric

Do I really need to set security for my wireless connection. I searched for available WiFi in my area prior to installing my network and none were available. Does that matter?
The network never did function right from the start. My desktop is a Dell Inspiron 510n and is not wireless capable? So when I tried to add my HP mni 1000 it did not let me access the Internet.
So now I have an unsecured network. Am I vulnerable to attack?
Which leads me to my real question How do I change the security settings?
Oh yeah, my home computer crashed due to a program I downloaded, so I do not have access to it. i'm a mess....
Thanks,for any help
Phil

Security settings blocking CCA Player?

Hi I am trying to take a course using a website that I've used before. I think it uses Cisco presentation software. Is there a setting I can change so I don't get this error message and the course can play??

Hmm, that looks like the Java dialogue boxes I've seen on our Windows 7 computers.
In System Preferences, do you have an icon for Java? It would most likely be at the bottom of the window.
If you do, click on it and look through the tabs - one of them should have a security settings slider that allows you to lower the setting so this will run.
If you need more guidance, this blog post has the steps
~Lyssa

HT3604 Please note that if you download the patch for this software, you will have to change your security settings in order to install it.

I'm guessing few people use this version of Aperture. Here's what happened because I use it. Apple spent several hours with me before I found the link to this software update.
Then I downloaded the patch. Then my computer would not install it as security changes needed to be changed from the standard: "only install software from the app store and identified developers." To install this patch, I needed to change settings to show, "allow applications downloaded from ANYWHERE."
This surprised me.
I ordered four books with this software today, spending over thirty dollars for each. For three of the four, I needed to change the order after it was processed by Apple so that the three gift books would be shipped to relatives instead of to me. NOTE THAT ADDING OTHER ADDRESSES WITHIN this version of Aperature doesn't change any shipping details in the actual order.
Since the rep told me the newer version is only about $90, I may spring for it. Or I might just give up on Aperture entirely and buy ADOBE Lightroom, since this application has been BUGGY.

Designer Handbag 
Rolex Replica 
Cheap handbag 
Swiss-made 
replica vuitton 
Replica Watche 
Designer Replicas 
Replica Watch Sale 
Louis Vuitton 
Fake Rolex 
Wholesale Replica 
Swiss Rolex 
Louis Vuitton Purses 
watch part 
Wholesale Louis Vuitton 
Authentic Swiss-Made 
Counterfeit Louis Vuitton 
buying watch 
Fendi Replica 
replica Submariner 
Vuitton Bag 
rolex air king 
LV Knockoffs 
rolex Day Date 
LV bags 
rolex Daytona 
replica wallet 
rolex datejust 
replica purse 
rolex explore 
vuitton wallet 
rolex milgauss 
knockoff handbags 
rolex GMT 
Burberry Handbags 
rolex sea dweller 
Burberry Wallets 
Rolex Yachtmaster 
Chanel handbag 
Swiss Replica 
Fendi Handbags 
Tag Heuer Replica 
Gucci bag 
Omega Watches 
J.P.Tods

Flash 8 Player security settings Help

Hi All. Im having some annoying problems with Flash player 8
(the standalone player not web one).
I am making a flash portfolio, and am using an XML file to
import data (such as images and text) into the portfolio at
runtime.
Everything works when run in the flash IDE when i run the swf
(see IDE.gif), but when i run it in local flash standalone player
(see Player.gif), the images are blocked out (un-masked) - this
doesnt happen when i view the swf on the web or when i make a
projector, which makes me think its something to do with flash 8
player security settings.
ive already changed the settings, adding the local path of
the file and the image directories, but still it wont work.
what other settings do i need to change??
IDE.gif :
www.mitchellpage.com.au/temp/IDE.gif
Player.gif:
www.mitchellpage.com.au/temp/Player.gif

AndiMorris wrote:
> I'm having some trouble with the global security
settings in Flash Player 8. I
> have deployed the player successfully using GPO, but now
have a piece of
> software (Nelson Thornes) that requires content from
c:\program files\nelson
> thornes to be allowed in order to run. Manually enabling
this using the
> settings manager works a treat, however it only changes
it for the current user
> and I can't find any way of setting it per station so
that I can package it up
> and deploy it. I can't expect all of my users to do this
themselves.
There is an MMS.cfg file that you can deploy that will allow
you to
control this site wide without individual user interaction
(overriding
settings manager).
Start learning here:
" IT Administration: Configuring Flash Player auto-update
notification"
http://www.adobe.com/go/16701594
Bentley Wolfe
Senior Support Engineer, Flash/Flash Player
Adobe

Flash Player 8 global security settings

I'm having some trouble with the global security settings in
Flash Player 8. I have deployed the player successfully using GPO,
but now have a piece of software (Nelson Thornes) that requires
content from c:\program files\nelson thornes to be allowed in order
to run. Manually enabling this using the settings manager works a
treat, however it only changes it for the current user and I can't
find any way of setting it per station so that I can package it up
and deploy it. I can't expect all of my users to do this
themselves.
Please tell me there's a way of doing this?!?!

AndiMorris wrote:
> I'm having some trouble with the global security
settings in Flash Player 8. I
> have deployed the player successfully using GPO, but now
have a piece of
> software (Nelson Thornes) that requires content from
c:\program files\nelson
> thornes to be allowed in order to run. Manually enabling
this using the
> settings manager works a treat, however it only changes
it for the current user
> and I can't find any way of setting it per station so
that I can package it up
> and deploy it. I can't expect all of my users to do this
themselves.
There is an MMS.cfg file that you can deploy that will allow
you to
control this site wide without individual user interaction
(overriding
settings manager).
Start learning here:
" IT Administration: Configuring Flash Player auto-update
notification"
http://www.adobe.com/go/16701594
Bentley Wolfe
Senior Support Engineer, Flash/Flash Player
Adobe

Flash on mac os 10.3.9 flash player being prohibited by browser security settings how do i fix this

this is the message i get
"This content requires the Adobe Flash Player. It either has not been installed yet or is prohibited by your browser security settings. Either click here to get Flash or loosen your browser security restrictions."
how do i loosen the browser security restrictions?

this is the message i get
"This content requires the Adobe Flash Player. It either has not been installed yet or is prohibited by your browser security settings. Either click here to get Flash or loosen your browser security restrictions."
how do i loosen the browser security restrictions?

Update security settings for adobe flash player

I have windows 7, 64bit, adobe flash player 11.
Can't play You Tube videos...message say need to update flash player.
Went to adobe site....tried to download latest version 11.8, and message says I need to update security settings to allow.
I'm a beginner...where and how to update these settings.

Download the Adobe Flash Player installer directly by right clicking one of the following links.
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)
Save the installer - DO NOT run it yet.
Reboot your system.
BEFORE you open anything else, locate and run the installer you downloaded.

How to install authorware player in silent mode

hi, I'm looking to install the authorware player in silent
mode for several computer in an organization, I would like to have
an installer (.exe or .msi) for internet explorer, does anyone
could help me with that? tahnks!

There is no MSI (nor .exe) for the Authorware web player.
It's only
available as a .cab. However, of course, you could unpack the
can and
create your own MSI if you have the proper tool (i.e
InstallShield).
Someone (in China?) did that a couple years ago. Searching
the archives
of this group on Google, or perhaps the A'ware Listserve, may
reveal...
Erik
ersatyle wrote:
> hi, I'm looking to install the authorware player in
silent mode for several
> computer in an organization, I would like to have an
installer (.exe or .msi)
> for internet explorer, does anyone could help me with
that? tahnks!
>
Erik Lord
http://www.capemedia.net
Adobe Community Expert - eLearning
http://www.adobe.com/communities/experts/
http://www.awaretips.net -
Authorware Tips!

Security Settings Will not allow me to Install Itunes 7

When I try to download Itunes 7.0 I get the security alert that says my security settings do not allow me to install the program. What should I do?

Try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

Security update for flash player....did it install?

Yesterday on dec 16, I had a window pop up on my comp telling me that there is some security update for flash player so I clicked install and it was connecting and everything...then I allowed Adobe systems incorportated permission and all that stuff which was normal....then the adobe helper stopped working and I got a message saying that it will have to close the program......now I don't know...did the updates install or not...what were the security updates so I can check...any advice?

Hi, well DLM is Download Manager and sometimes it is used to D/L FP. It is supposed to disconnect after FP is downloaded. Go to Add/Remove, you should see Flash Player 10 ActiveX listed. If the Adobe Download Manager or DLM is listed Remove it from there and reboot. It is not supposed to be there after it serves it purpose.
The version is 10.0.42.34, I hope you just made a typo:-)
Also, if you are using IE, go to Tools>Manage add ons and look to see if you have listed Shockwave Flash Object......
ActiveX......Flash10d.ocx and that it is Enabled. Be sure to check in "currently loaded" and "have been used".
In Firefox you would look in extenstions, add ons or plug-ins, look for SWF.
In order for FP to operate properly, you need the ActiveX in IE and the SWF plug-in in FF.
Thanks

Flash Player Security Settings

How can I get a copy of the global security settings manager
for use on an Intranet?
So far I can only change my security settings in flash
through the internet and I need to do this on about 100 computers
that are connected to my intranet with no means to connect to the
internet.
Thanks
Glenn

Hi mocca,
Thanks again for your reply. You are giving me things to re-think about, I thought about all these options yesterday, but now that you mention them as the solutions, I will re-think with more gusto. A few things I'm still dwelling on:
Why is that an issue?
Because the users system settings should always override anything that comes from a disk... Same with any programm on my computer, if somwhere from a network/external drive wants to open my browser without my consent, why should it?
Agreed. It should not. However, per the paradigm of my project on disk, the user launches the browser, the browser loads the swf, but the loading of all the other content is restricted. That seems counter-intuitive - since the user has already launched the main app, they obviously trust the app to run on their box, but they now have to go through an extra 'security layer' step in order to load the accompanying content.
As per publishing to Air, I tried yesterday and Flash Builder kicked all sorts of errors. I'll try publishing to air more today...
In the mindset of the great John Peterman: "Ah, the 'client changing requirements', where the client's expectations are high, the knowledge of the "level of effort" is low, and the process is terribly frustrating."
Thx again,
Chipleh

I am trying to use a site that i have to do homework on but my security settings keep blobking some applet in needs to run for it to work.

I am trying to use a site that i have to do homework on but my security settings keep blocking some applet in needs to run for it to work. I have tried to make exceptions in the security settings but it has not worked.

There are other things that need your attention.
Your System Details List shows multiple Flash plugins.
* Shockwave Flash 14.0 r0
*Shockwave Flash 11.6 r602
You can find the installation path of all plugins on the about:plugins page.
*http://kb.mozillazine.org/Issues_related_to_plugins#Identifying_installed_plugins
You can check the Flash player installation folder for multiple Flash player plugins and remove older version(s) of the plugin (NPSWF32) and possibly (re)install the latest Flash player.
*(32 bit Windows) C:\Windows\System32\Macromed\Flash\
*(64 bit Windows) C:\Windows\SysWOW64\Macromed\Flash\

No Global security settings for my localhost, Help?

Player 9
I develop flash apps in localhost and I receive that error
message:
Adobe Flash Player has stopped a potential unsafe operation
The following local application on your computer or network:
/Application/MAMP/htdocs/joomlagraf/modules/.../ssp.swf is
trying to communicate with this Internet-enabled location:
localhost
I beleive you can fix that in the Global security settings,
but this panel is absent when I right click on my flash movie. I
got —> Privacy/Local Storage/Microphone/Camera only, on a
fresh player 9 install.
How can I access that Global security settings panel, what
can I do???????????
My work is stopped......... Help!

Hi Popocatepelt,
Glad to hear that worked for you….
Local Access Only allows the published SWF file to interact
with files on the local system, but not on the network. Access
Network Only lets the published SWF file interact with files and
resources on the network, but not on the local system.
For more info take a look at the following
http://www.adobe.com/products/flashplayer/security/
For local content:
http://www.adobe.com/products/flashplayer/articles/localcontent/

Security Settings on Authorware Player Install

Similar Messages

Maybe you are looking for